Commit 60c4e62c authored by Yifeng Li's avatar Yifeng Li Committed by Greg Kroah-Hartman

fbdev: sm712fb: fix VRAM detection, don't set SR70/71/74/75

commit dcf90705 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video
RAM is not detected correctly by the xf86-video-siliconmotion driver.
This is because sm712fb overwrites the GPR71 Scratch Pad Register, which
is set by BIOS on x86 and used to indicate amount of VRAM.

Other Scratch Pad Registers, including GPR70/74/75, don't have the same
side-effect, but overwriting to them is still questionable, as they are
not related to modesetting.

Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75).
Signed-off-by: default avatarYifeng Li <tomli@tomli.me>
Tested-by: default avatarSudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org>  # v4.4+
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 860bb76a
...@@ -1146,7 +1146,9 @@ static void sm7xx_set_timing(struct smtcfb_info *sfb) ...@@ -1146,7 +1146,9 @@ static void sm7xx_set_timing(struct smtcfb_info *sfb)
/* init SEQ register SR30 - SR75 */ /* init SEQ register SR30 - SR75 */
for (i = 0; i < SIZE_SR30_SR75; i++) for (i = 0; i < SIZE_SR30_SR75; i++)
if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 && if ((i + 0x30) != 0x30 && (i + 0x30) != 0x62 &&
(i + 0x30) != 0x6a && (i + 0x30) != 0x6b) (i + 0x30) != 0x6a && (i + 0x30) != 0x6b &&
(i + 0x30) != 0x70 && (i + 0x30) != 0x71 &&
(i + 0x30) != 0x74 && (i + 0x30) != 0x75)
smtc_seqw(i + 0x30, smtc_seqw(i + 0x30,
vgamode[j].init_sr30_sr75[i]); vgamode[j].init_sr30_sr75[i]);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment