scsi: hisi_sas: update RAS feature for later revision of v3 HW

There is an modification for later revision of v3 hw. More HW errors are
reported through RAS interrupt. These errors were originally reported
only through MSI.

When report to RAS, some combinations are done to port AXI errors and
FIFO OMIT errors. For example, each port has 4 AXI errors, and they are
combined to one when report to RAS.

This patch does two things:

1. Enable RAS interrupt of these errors and handle them in PCI
   error handlers.

2. Disable MSI interrupts of these errors for this later revision hw.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -216,6 +216,9 @@
 #define SAS_RAS_INTR1			(RAS_BASE + 0x04)
 #define SAS_RAS_INTR0_MASK		(RAS_BASE + 0x08)
 #define SAS_RAS_INTR1_MASK		(RAS_BASE + 0x0c)
+#define CFG_SAS_RAS_INTR_MASK		(RAS_BASE + 0x1c)
+#define SAS_RAS_INTR2			(RAS_BASE + 0x20)
+#define SAS_RAS_INTR2_MASK		(RAS_BASE + 0x24)
 
 /* HW dma structures */
 /* Delivery queue header */
@@ -392,6 +395,7 @@ static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
 
 static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 {
+	struct pci_dev *pdev = hisi_hba->pci_dev;
 	int i;
 
 	/* Global registers init */
@@ -409,6 +413,9 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC3, 0xffffffff);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0xfefefefe);
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0xfefefefe);
+	if (pdev->revision >= 0x21)
+		hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xffff7fff);
+	else
 		hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, 0xfffe20ff);
 	hisi_sas_write32(hisi_hba, CHNL_PHYUPDOWN_INT_MSK, 0x0);
 	hisi_sas_write32(hisi_hba, CHNL_ENT_INT_MSK, 0x0);
@@ -428,7 +435,12 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, 0xffffffff);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, 0xffffffff);
 		hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
-		hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0xff87ffff);
+		if (pdev->revision >= 0x21)
+			hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK,
+					0xffffffff);
+		else
+			hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK,
+					0xff87ffff);
 		hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0xffffbfe);
 		hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL_RDY_MSK, 0x0);
 		hisi_sas_phy_write32(hisi_hba, i, PHYCTRL_NOT_RDY_MSK, 0x0);
@@ -503,6 +515,8 @@ static void init_reg_v3_hw(struct hisi_hba *hisi_hba)
 	/* RAS registers init */
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR0_MASK, 0x0);
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR1_MASK, 0x0);
+	hisi_sas_write32(hisi_hba, SAS_RAS_INTR2_MASK, 0x0);
+	hisi_sas_write32(hisi_hba, CFG_SAS_RAS_INTR_MASK, 0x0);
 }
 
 static void config_phy_opt_mode_v3_hw(struct hisi_hba *hisi_hba, int phy_no)
@@ -1319,6 +1333,13 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
 						     CHL_INT1);
 		u32 irq_value2 = hisi_sas_phy_read32(hisi_hba, phy_no,
 						     CHL_INT2);
+		u32 irq_msk1 = hisi_sas_phy_read32(hisi_hba, phy_no,
+							CHL_INT1_MSK);
+		u32 irq_msk2 = hisi_sas_phy_read32(hisi_hba, phy_no,
+							CHL_INT2_MSK);
+
+		irq_value1 &= ~irq_msk1;
+		irq_value2 &= ~irq_msk2;
 
 		if ((irq_msk & (4 << (phy_no * 4))) &&
 						irq_value1) {
@@ -1448,6 +1469,7 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p)
 	hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK3, irq_msk | 0x1df00);
 
 	irq_value = hisi_sas_read32(hisi_hba, ENT_INT_SRC3);
+	irq_value &= ~irq_msk;
 
 	for (i = 0; i < ARRAY_SIZE(fatal_axi_error); i++) {
 		const struct hisi_sas_hw_error *error = &fatal_axi_error[i];
@@ -2222,6 +2244,29 @@ static const struct hisi_sas_hw_error sas_ras_intr1_nfe[] = {
 	{ .irq_msk = BIT(31), .msg = "DMAC7_RX_POISON" },
 };
 
+static const struct hisi_sas_hw_error sas_ras_intr2_nfe[] = {
+	{ .irq_msk = BIT(0), .msg = "DMAC0_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(1), .msg = "DMAC1_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(2), .msg = "DMAC2_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(3), .msg = "DMAC3_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(4), .msg = "DMAC4_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(5), .msg = "DMAC5_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(6), .msg = "DMAC6_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(7), .msg = "DMAC7_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(8), .msg = "DMAC0_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(9), .msg = "DMAC1_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(10), .msg = "DMAC2_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(11), .msg = "DMAC3_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(12), .msg = "DMAC4_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(13), .msg = "DMAC5_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(14), .msg = "DMAC6_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(15), .msg = "DMAC7_FIFO_OMIT_ERR" },
+	{ .irq_msk = BIT(16), .msg = "HGC_RLSE_SLOT_UNMATCH" },
+	{ .irq_msk = BIT(17), .msg = "HGC_LM_ADD_FCH_LIST_ERR" },
+	{ .irq_msk = BIT(18), .msg = "HGC_AXI_BUS_ERR" },
+	{ .irq_msk = BIT(19), .msg = "HGC_FIFO_OMIT_ERR" },
+};
+
 static bool process_non_fatal_error_v3_hw(struct hisi_hba *hisi_hba)
 {
 	struct device *dev = hisi_hba->dev;
@@ -2252,6 +2297,17 @@ static bool process_non_fatal_error_v3_hw(struct hisi_hba *hisi_hba)
 	}
 	hisi_sas_write32(hisi_hba, SAS_RAS_INTR1, irq_value);
 
+	irq_value = hisi_sas_read32(hisi_hba, SAS_RAS_INTR2);
+	for (i = 0; i < ARRAY_SIZE(sas_ras_intr2_nfe); i++) {
+		ras_error = &sas_ras_intr2_nfe[i];
+		if (ras_error->irq_msk & irq_value) {
+			dev_warn(dev, "SAS_RAS_INTR2: %s(irq_value=0x%x) found.\n",
+					ras_error->msg, irq_value);
+			need_reset = true;
+		}
+	}
+	hisi_sas_write32(hisi_hba, SAS_RAS_INTR2, irq_value);
+
 	return need_reset;
 }