Skip to content

L
linux
Commit 61619b12 authored by Greg Ungerer's avatar Greg Ungerer
Browse files
Options

m68k: merge mmu and non-mmu include/asm/entry.h files 

The changes in the mmu version of entry.h (entry_mm.h) and the non-mmu
version (entry_no.h) are not about the presence or use of an MMU at all.
The main changes are to support the ColdFire processors. The code for
trap entry and exit for all types of 68k processor outside coldfire is
the same.

So merge the files back to a single entry.h and share the common 68k
entry/exit code. Some changes are required for the non-mmu entry
handlers to adopt the differing macros for system call and interrupt
entry, but this is quite strait forward. The changes for the ColdFire
remove a couple of instructions for the separate a7 register case, and
are no worse for the older single a7 register case.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
parent 0a01b310
Show whitespace changes
Inline Side-by-side
Showing with 268 additions and 330 deletions
arch/m68k/include/asm/entry.h
View file @ 61619b12
#ifdef __uClinux__
#include "entry_no.h"
#ifndef __M68K_ENTRY_H
#define __M68K_ENTRY_H
#include <asm/setup.h>
#include <asm/page.h>
#ifdef __ASSEMBLY__
#include <asm/thread_info.h>
#endif
/*
* Stack layout in 'ret_from_exception':
*
* This allows access to the syscall arguments in registers d1-d5
*
* 0(sp) - d1
* 4(sp) - d2
* 8(sp) - d3
* C(sp) - d4
* 10(sp) - d5
* 14(sp) - a0
* 18(sp) - a1
* 1C(sp) - a2
* 20(sp) - d0
* 24(sp) - orig_d0
* 28(sp) - stack adjustment
* 2C(sp) - [ sr ] [ format & vector ]
* 2E(sp) - [ pc-hiword ] [ sr ]
* 30(sp) - [ pc-loword ] [ pc-hiword ]
* 32(sp) - [ format & vector ] [ pc-loword ]
* ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
* M68K COLDFIRE
*/
/* the following macro is used when enabling interrupts */
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari */
#define ALLOWINT (~0x400)
#define MAX_NOINT_IPL 3
#else
#include "entry_mm.h"
/* portable version */
#define ALLOWINT (~0x700)
#define MAX_NOINT_IPL 0
#endif /* machine compilation types */
#ifdef __ASSEMBLY__
/*
* This defines the normal kernel pt-regs layout.
*
* regs a3-a6 and d6-d7 are preserved by C code
* the kernel doesn't mess with usp unless it needs to
*/
#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
#ifdef CONFIG_COLDFIRE
#ifdef CONFIG_COLDFIRE_SW_A7
/*
* This is made a little more tricky on older ColdFires. There is no
* separate supervisor and user stack pointers. Need to artificially
* construct a usp in software... When doing this we need to disable
* interrupts, otherwise bad things will happen.
*/
.globl sw_usp
.globl sw_ksp
.macro SAVE_ALL_SYS
move #0x2700,%sr /* disable intrs */
btst #5,%sp@(2) /* from user? */
bnes 6f /* no, skip */
movel %sp,sw_usp /* save user sp */
addql #8,sw_usp /* remove exception */
movel sw_ksp,%sp /* kernel sp */
subql #8,%sp /* room for exception */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
movel sw_usp,%a0 /* get usp */
movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
bra 7f
6:
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
7:
.endm
.macro SAVE_ALL_INT
SAVE_ALL_SYS
moveq #-1,%d0 /* not system call entry */
movel %d0,%sp@(PT_OFF_ORIG_D0)
.endm
.macro RESTORE_USER
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
addql #8,%sp /* remove exception */
movel %sp,sw_ksp /* save ksp */
subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */
rte
.endm
.macro RDUSP
movel sw_usp,%a3
.endm
.macro WRUSP
movel %a3,sw_usp
.endm
#else /* !CONFIG_COLDFIRE_SW_A7 */
/*
* Modern ColdFire parts have separate supervisor and user stack
* pointers. Simple load and restore macros for this case.
*/
.macro SAVE_ALL_SYS
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
.endm
.macro SAVE_ALL_INT
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
pea -1:w /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
.endm
.macro RESTORE_USER
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm
.macro RDUSP
/*move %usp,%a3*/
.word 0x4e6b
.endm
.macro WRUSP
/*move %a3,%usp*/
.word 0x4e63
.endm
#endif /* !CONFIG_COLDFIRE_SW_A7 */
.macro SAVE_SWITCH_STACK
lea %sp@(-24),%sp /* 6 regs */
moveml %a3-%a6/%d6-%d7,%sp@
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@,%a3-%a6/%d6-%d7
lea %sp@(24),%sp /* 6 regs */
.endm
#else /* !CONFIG_COLDFIRE */
/*
* All other types of m68k parts (68000, 680x0, CPU32) have the same
* entry and exit code.
*/
/*
* a -1 in the orig_d0 field signifies
* that the stack frame is NOT for syscall
*/
.macro SAVE_ALL_INT
clrl %sp@- /* stk_adj */
pea -1:w /* orig d0 */
movel %d0,%sp@- /* d0 */
moveml %d1-%d5/%a0-%a2,%sp@-
.endm
.macro SAVE_ALL_SYS
clrl %sp@- /* stk_adj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
moveml %d1-%d5/%a0-%a2,%sp@-
.endm
.macro RESTORE_ALL
moveml %sp@+,%a0-%a2/%d1-%d5
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stk adj */
rte
.endm
.macro SAVE_SWITCH_STACK
moveml %a3-%a6/%d6-%d7,%sp@-
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
#endif /* !CONFIG_COLDFIRE */
/*
* Register %a2 is reserved and set to current task on MMU enabled systems.
* Non-MMU systems do not reserve %a2 in this way, and this definition is
* not used for them.
*/
#define curptr a2
#define GET_CURRENT(tmp) get_current tmp
.macro get_current reg=%d0
movel %sp,\reg
andw #-THREAD_SIZE,\reg
movel \reg,%curptr
movel %curptr@,%curptr
.endm
#else /* C source */
#define STR(X) STR1(X)
#define STR1(X) #X
#define SAVE_ALL_INT \
"clrl %%sp@-;" /* stk_adj */ \
"pea -1:w;" /* orig d0 = -1 */ \
"movel %%d0,%%sp@-;" /* d0 */ \
"moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
#define GET_CURRENT(tmp) \
"movel %%sp,"#tmp"\n\t" \
"andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
"movel "#tmp",%%a2\n\t" \
"movel %%a2@,%%a2"
#endif
#endif /* __M68K_ENTRY_H */
arch/m68k/include/asm/entry_mm.h deleted 100644 → 0
View file @ 0a01b310
#ifndef __M68K_ENTRY_H
#define __M68K_ENTRY_H
#include <asm/setup.h>
#include <asm/page.h>
#ifdef __ASSEMBLY__
#include <asm/thread_info.h>
#endif
/*
* Stack layout in 'ret_from_exception':
*
* This allows access to the syscall arguments in registers d1-d5
*
* 0(sp) - d1
* 4(sp) - d2
* 8(sp) - d3
* C(sp) - d4
* 10(sp) - d5
* 14(sp) - a0
* 18(sp) - a1
* 1C(sp) - a2
* 20(sp) - d0
* 24(sp) - orig_d0
* 28(sp) - stack adjustment
* 2C(sp) - sr
* 2E(sp) - pc
* 32(sp) - format & vector
*/
/*
* 97/05/14 Andreas: Register %a2 is now set to the current task throughout
* the whole kernel.
*/
/* the following macro is used when enabling interrupts */
#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari */
#define ALLOWINT (~0x400)
#define MAX_NOINT_IPL 3
#else
/* portable version */
#define ALLOWINT (~0x700)
#define MAX_NOINT_IPL 0
#endif /* machine compilation types */
#ifdef __ASSEMBLY__
#define curptr a2
LFLUSH_I_AND_D = 0x00000808
#define SAVE_ALL_INT save_all_int
#define SAVE_ALL_SYS save_all_sys
#define RESTORE_ALL restore_all
/*
* This defines the normal kernel pt-regs layout.
*
* regs a3-a6 and d6-d7 are preserved by C code
* the kernel doesn't mess with usp unless it needs to
*/
/*
* a -1 in the orig_d0 field signifies
* that the stack frame is NOT for syscall
*/
.macro save_all_int
clrl %sp@- | stk_adj
pea -1:w | orig d0
movel %d0,%sp@- | d0
moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
.endm
.macro save_all_sys
clrl %sp@- | stk_adj
movel %d0,%sp@- | orig d0
movel %d0,%sp@- | d0
moveml %d1-%d5/%a0-%a1/%curptr,%sp@-
.endm
.macro restore_all
moveml %sp@+,%a0-%a1/%curptr/%d1-%d5
movel %sp@+,%d0
addql #4,%sp | orig d0
addl %sp@+,%sp | stk adj
rte
.endm
#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */
#define SAVE_SWITCH_STACK save_switch_stack
#define RESTORE_SWITCH_STACK restore_switch_stack
#define GET_CURRENT(tmp) get_current tmp
.macro save_switch_stack
moveml %a3-%a6/%d6-%d7,%sp@-
.endm
.macro restore_switch_stack
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
.macro get_current reg=%d0
movel %sp,\reg
andw #-THREAD_SIZE,\reg
movel \reg,%curptr
movel %curptr@,%curptr
.endm
#else /* C source */
#define STR(X) STR1(X)
#define STR1(X) #X
#define SAVE_ALL_INT \
"clrl %%sp@-;" /* stk_adj */ \
"pea -1:w;" /* orig d0 = -1 */ \
"movel %%d0,%%sp@-;" /* d0 */ \
"moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
#define GET_CURRENT(tmp) \
"movel %%sp,"#tmp"\n\t" \
"andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \
"movel "#tmp",%%a2\n\t" \
"movel %%a2@,%%a2"
#endif
#endif /* __M68K_ENTRY_H */
arch/m68k/include/asm/entry_no.h deleted 100644 → 0
View file @ 0a01b310
#ifndef __M68KNOMMU_ENTRY_H
#define __M68KNOMMU_ENTRY_H
#include <asm/setup.h>
#include <asm/page.h>
/*
* Stack layout in 'ret_from_exception':
*
* This allows access to the syscall arguments in registers d1-d5
*
* 0(sp) - d1
* 4(sp) - d2
* 8(sp) - d3
* C(sp) - d4
* 10(sp) - d5
* 14(sp) - a0
* 18(sp) - a1
* 1C(sp) - a2
* 20(sp) - d0
* 24(sp) - orig_d0
* 28(sp) - stack adjustment
* 2C(sp) - [ sr ] [ format & vector ]
* 2E(sp) - [ pc-hiword ] [ sr ]
* 30(sp) - [ pc-loword ] [ pc-hiword ]
* 32(sp) - [ format & vector ] [ pc-loword ]
* ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
* M68K COLDFIRE
*/
#define ALLOWINT (~0x700)
#ifdef __ASSEMBLY__
#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */
/*
* This defines the normal kernel pt-regs layout.
*
* regs are a2-a6 and d6-d7 preserved by C code
* the kernel doesn't mess with usp unless it needs to
*/
#ifdef CONFIG_COLDFIRE
#ifdef CONFIG_COLDFIRE_SW_A7
/*
* This is made a little more tricky on older ColdFires. There is no
* separate supervisor and user stack pointers. Need to artificially
* construct a usp in software... When doing this we need to disable
* interrupts, otherwise bad things will happen.
*/
.globl sw_usp
.globl sw_ksp
.macro SAVE_ALL
move #0x2700,%sr /* disable intrs */
btst #5,%sp@(2) /* from user? */
bnes 6f /* no, skip */
movel %sp,sw_usp /* save user sp */
addql #8,sw_usp /* remove exception */
movel sw_ksp,%sp /* kernel sp */
subql #8,%sp /* room for exception */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
movel sw_usp,%a0 /* get usp */
movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */
movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
bra 7f
6:
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
7:
.endm
.macro RESTORE_USER
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
addql #8,%sp /* remove exception */
movel %sp,sw_ksp /* save ksp */
subql #8,sw_usp /* set exception */
movel sw_usp,%sp /* restore usp */
rte
.endm
.macro RDUSP
movel sw_usp,%a3
.endm
.macro WRUSP
movel %a3,sw_usp
.endm
#else /* !CONFIG_COLDFIRE_SW_A7 */
/*
* Modern ColdFire parts have separate supervisor and user stack
* pointers. Simple load and restore macros for this case.
*/
.macro SAVE_ALL
move #0x2700,%sr /* disable intrs */
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
lea %sp@(-32),%sp /* space for 8 regs */
moveml %d1-%d5/%a0-%a2,%sp@
.endm
.macro RESTORE_USER
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm
.macro RDUSP
/*move %usp,%a3*/
.word 0x4e6b
.endm
.macro WRUSP
/*move %a3,%usp*/
.word 0x4e63
.endm
#endif /* !CONFIG_COLDFIRE_SW_A7 */
.macro SAVE_SWITCH_STACK
lea %sp@(-24),%sp /* 6 regs */
moveml %a3-%a6/%d6-%d7,%sp@
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@,%a3-%a6/%d6-%d7
lea %sp@(24),%sp /* 6 regs */
.endm
#else /* !CONFIG_COLDFIRE */
/*
* Standard 68k interrupt entry and exit macros.
*/
.macro SAVE_ALL
clrl %sp@- /* stkadj */
movel %d0,%sp@- /* orig d0 */
movel %d0,%sp@- /* d0 */
moveml %d1-%d5/%a0-%a2,%sp@-
.endm
.macro RESTORE_ALL
moveml %sp@+,%a0-%a2/%d1-%d5
movel %sp@+,%d0
addql #4,%sp /* orig d0 */
addl %sp@+,%sp /* stkadj */
rte
.endm
.macro SAVE_SWITCH_STACK
moveml %a3-%a6/%d6-%d7,%sp@-
.endm
.macro RESTORE_SWITCH_STACK
moveml %sp@+,%a3-%a6/%d6-%d7
.endm
#endif /* !COLDFIRE_SW_A7 */
#endif /* __ASSEMBLY__ */
#endif /* __M68KNOMMU_ENTRY_H */
arch/m68k/kernel/entry_no.S
View file @ 61619b12
......@@ -43,7 +43,7 @@
.globl sys_vfork
ENTRY(buserr)
SAVE_ALL
SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
......@@ -52,7 +52,7 @@ ENTRY(buserr)
jra ret_from_exception
ENTRY(trap)
SAVE_ALL
SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
......@@ -64,7 +64,7 @@ ENTRY(trap)
.globl dbginterrupt
ENTRY(dbginterrupt)
SAVE_ALL
SAVE_ALL_INT
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
......
arch/m68k/platform/68328/entry.S
View file @ 61619b12
......@@ -67,7 +67,7 @@ ret_from_signal:
jra ret_from_exception
ENTRY(system_call)
SAVE_ALL
SAVE_ALL_SYS
/* save top of frame*/
pea %sp@
......@@ -129,7 +129,7 @@ Lsignal_return:
* This is the main interrupt handler, responsible for calling process_int()
*/
inthandler1:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -140,7 +140,7 @@ inthandler1:
bra ret_from_interrupt
inthandler2:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -151,7 +151,7 @@ inthandler2:
bra ret_from_interrupt
inthandler3:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -162,7 +162,7 @@ inthandler3:
bra ret_from_interrupt
inthandler4:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -173,7 +173,7 @@ inthandler4:
bra ret_from_interrupt
inthandler5:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -184,7 +184,7 @@ inthandler5:
bra ret_from_interrupt
inthandler6:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -195,7 +195,7 @@ inthandler6:
bra ret_from_interrupt
inthandler7:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......@@ -206,7 +206,7 @@ inthandler7:
bra ret_from_interrupt
inthandler:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and #0x3ff, %d0
......
arch/m68k/platform/68360/entry.S
View file @ 61619b12
......@@ -63,7 +63,7 @@ ret_from_signal:
jra ret_from_exception
ENTRY(system_call)
SAVE_ALL
SAVE_ALL_SYS
/* save top of frame*/
pea %sp@
......@@ -125,7 +125,7 @@ Lsignal_return:
* This is the main interrupt handler, responsible for calling do_IRQ()
*/
inthandler:
SAVE_ALL
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC), %d0
and.l #0x3ff, %d0
lsr.l #0x02, %d0
......
arch/m68k/platform/coldfire/entry.S
View file @ 61619b12
......@@ -61,7 +61,7 @@ enosys:
bra 1f
ENTRY(system_call)
SAVE_ALL
SAVE_ALL_SYS
move #0x2000,%sr /* enable intrs again */
cmpl #NR_syscalls,%d0
......@@ -165,9 +165,7 @@ Lsignal_return:
* sources). Calls up to high level code to do all the work.
*/
ENTRY(inthandler)
SAVE_ALL
moveq #-1,%d0
movel %d0,%sp@(PT_OFF_ORIG_D0)
SAVE_ALL_INT
movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
andl #0x03fc,%d0 /* mask out vector only */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7