dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0

Add 7216b0 with supports CQE, HS400, HS400-ES and SDR104.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20200113210706.11972-2-alcooperx@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt

@@ -11,28 +11,43 @@ Required properties:
 - compatible: should be one of the following
   - "brcm,bcm7425-sdhci"
   - "brcm,bcm7445-sdhci"
+  - "brcm,bcm7216-sdhci"
 
 Refer to clocks/clock-bindings.txt for generic clock consumer properties.
 
 Example:
 
-	sdhci@f03e0100 {
-		compatible = "brcm,bcm7425-sdhci";
-		reg = <0xf03e0000 0x100>;
-		interrupts = <0x0 0x26 0x0>;
-		sdhci,auto-cmd12;
-		clocks = <&sw_sdio>;
+	sdhci@84b0000 {
 		sd-uhs-sdr50;
 		sd-uhs-ddr50;
+		sd-uhs-sdr104;
+		sdhci,auto-cmd12;
+		compatible = "brcm,bcm7216-sdhci",
+			   "brcm,bcm7445-sdhci",
+			   "brcm,sdhci-brcmstb";
+		reg = <0x84b0000 0x260 0x84b0300 0x200>;
+		reg-names = "host", "cfg";
+		interrupts = <0x0 0x26 0x4>;
+		interrupt-names = "sdio0_0";
+		clocks = <&scmi_clk 245>;
+		clock-names = "sw_sdio";
 	};
 
-	sdhci@f03e0300 {
+	sdhci@84b1000 {
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		mmc-hs400-enhanced-strobe;
+		supports-cqe;
 		non-removable;
 		bus-width = <0x8>;
-		compatible = "brcm,bcm7425-sdhci";
-		reg = <0xf03e0200 0x100>;
-		interrupts = <0x0 0x27 0x0>;
-		sdhci,auto-cmd12;
-		clocks = <sw_sdio>;
-		mmc-hs200-1_8v;
+		compatible = "brcm,bcm7216-sdhci",
+			   "brcm,bcm7445-sdhci",
+			   "brcm,sdhci-brcmstb";
+		reg = <0x84b1000 0x260 0x84b1300 0x200>;
+		reg-names = "host", "cfg";
+		interrupts = <0x0 0x27 0x4>;
+		interrupt-names = "sdio1_0";
+		clocks = <&scmi_clk 245>;
+		clock-names = "sw_sdio";
 	};