drm/radeon/kms: Enable new pll calculation for avivo+ asics

New algo is used for r5xx+ and legacy is used for
r1xx-r4xx, rv515.

I've tested on all relevant GPUs and monitors that I
have access to and have found no problems.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=26562
https://bugzilla.kernel.org/show_bug.cgi?id=26552
May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=32556Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/radeon/atombios_crtc.c

@@ -555,6 +555,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					dp_clock = dig_connector->dp_clock;
 				}
 			}
+/* this might work properly with the new pll algo */
 #if 0 /* doesn't work properly on some laptops */
 			/* use recommended ref_div for ss */
 			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
@@ -572,6 +573,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					adjusted_clock = mode->clock * 2;
 				if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
 					pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
+				/* rv515 needs more testing with this option */
+				if (rdev->family != CHIP_RV515) {
+					if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+						pll->flags |= RADEON_PLL_IS_LCD;
+				}
 			} else {
 				if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
 					pll->flags |= RADEON_PLL_NO_ODD_POST_DIV;
@@ -951,8 +957,16 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode
 	/* adjust pixel clock as needed */
 	adjusted_clock = atombios_adjust_pll(crtc, mode, pll, ss_enabled, &ss);
 
-	radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
-				  &ref_div, &post_div);
+	/* rv515 seems happier with the old algo */
+	if (rdev->family == CHIP_RV515)
+		radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+					  &ref_div, &post_div);
+	else if (ASIC_IS_AVIVO(rdev))
+		radeon_compute_pll_avivo(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+					 &ref_div, &post_div);
+	else
+		radeon_compute_pll_legacy(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
+					  &ref_div, &post_div);
 
 	atombios_crtc_program_ss(crtc, ATOM_DISABLE, radeon_crtc->pll_id, &ss);
 

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -1163,16 +1163,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
 				p1pll->pll_out_min = 64800;
 			else
 				p1pll->pll_out_min = 20000;
-		} else if (p1pll->pll_out_min > 64800) {
-			/* Limiting the pll output range is a good thing generally as
-			 * it limits the number of possible pll combinations for a given
-			 * frequency presumably to the ones that work best on each card.
-			 * However, certain duallink DVI monitors seem to like
-			 * pll combinations that would be limited by this at least on
-			 * pre-DCE 3.0 r6xx hardware.  This might need to be adjusted per
-			 * family.
-			 */
-			p1pll->pll_out_min = 64800;
 		}
 
 		p1pll->pll_in_min =

drivers/gpu/drm/radeon/radeon_display.c

@@ -935,6 +935,9 @@ void radeon_compute_pll_legacy(struct radeon_pll *pll,
 		pll_out_max = pll->pll_out_max;
 	}
 
+	if (pll_out_min > 64800)
+		pll_out_min = 64800;
+
 	if (pll->flags & RADEON_PLL_USE_REF_DIV)
 		min_ref_div = max_ref_div = pll->reference_div;
 	else {