staging: comedi: amplc_pci230: Prefer using the BIT macro

Fix the checkpatch.pl issues by using the BIT macro and defining some
macros for the multi-bit fields.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/amplc_pci230.c

@@ -237,47 +237,50 @@
 /*
  * DACCON read-write values.
  */
-#define PCI230_DAC_OR_UNI		(0 << 0) /* Output range unipolar */
-#define PCI230_DAC_OR_BIP		(1 << 0) /* Output range bipolar */
-#define PCI230_DAC_OR_MASK		(1 << 0)
+#define PCI230_DAC_OR(x)		(((x) & 0x1) << 0)
+#define PCI230_DAC_OR_UNI		PCI230_DAC_OR(0) /* Output unipolar */
+#define PCI230_DAC_OR_BIP		PCI230_DAC_OR(1) /* Output bipolar */
+#define PCI230_DAC_OR_MASK		PCI230_DAC_OR(1)
 /*
  * The following applies only if DAC FIFO support is enabled in the EXTFUNC
  * register (and only for PCI230+ hardware version 2 onwards).
  */
-#define PCI230P2_DAC_FIFO_EN		(1 << 8) /* FIFO enable */
+#define PCI230P2_DAC_FIFO_EN		BIT(8) /* FIFO enable */
 /*
  * The following apply only if the DAC FIFO is enabled (and only for PCI230+
  * hardware version 2 onwards).
  */
-#define PCI230P2_DAC_TRIG_NONE		(0 << 2) /* No trigger */
-#define PCI230P2_DAC_TRIG_SW		(1 << 2) /* Software trigger trigger */
-#define PCI230P2_DAC_TRIG_EXTP		(2 << 2) /* EXTTRIG +ve edge trigger */
-#define PCI230P2_DAC_TRIG_EXTN		(3 << 2) /* EXTTRIG -ve edge trigger */
-#define PCI230P2_DAC_TRIG_Z2CT0		(4 << 2) /* CT0-OUT +ve edge trigger */
-#define PCI230P2_DAC_TRIG_Z2CT1		(5 << 2) /* CT1-OUT +ve edge trigger */
-#define PCI230P2_DAC_TRIG_Z2CT2		(6 << 2) /* CT2-OUT +ve edge trigger */
-#define PCI230P2_DAC_TRIG_MASK		(7 << 2)
-#define PCI230P2_DAC_FIFO_WRAP		(1 << 7) /* FIFO wraparound mode */
-#define PCI230P2_DAC_INT_FIFO_EMPTY	(0 << 9) /* FIFO interrupt empty */
-#define PCI230P2_DAC_INT_FIFO_NEMPTY	(1 << 9)
-#define PCI230P2_DAC_INT_FIFO_NHALF	(2 << 9) /* FIFO intr not half full */
-#define PCI230P2_DAC_INT_FIFO_HALF	(3 << 9)
-#define PCI230P2_DAC_INT_FIFO_NFULL	(4 << 9) /* FIFO interrupt not full */
-#define PCI230P2_DAC_INT_FIFO_FULL	(5 << 9)
-#define PCI230P2_DAC_INT_FIFO_MASK	(7 << 9)
+#define PCI230P2_DAC_TRIG(x)		(((x) & 0x7) << 2)
+#define PCI230P2_DAC_TRIG_NONE		PCI230P2_DAC_TRIG(0) /* none */
+#define PCI230P2_DAC_TRIG_SW		PCI230P2_DAC_TRIG(1) /* soft trig */
+#define PCI230P2_DAC_TRIG_EXTP		PCI230P2_DAC_TRIG(2) /* ext + edge */
+#define PCI230P2_DAC_TRIG_EXTN		PCI230P2_DAC_TRIG(3) /* ext - edge */
+#define PCI230P2_DAC_TRIG_Z2CT0		PCI230P2_DAC_TRIG(4) /* Z2 CT0 out */
+#define PCI230P2_DAC_TRIG_Z2CT1		PCI230P2_DAC_TRIG(5) /* Z2 CT1 out */
+#define PCI230P2_DAC_TRIG_Z2CT2		PCI230P2_DAC_TRIG(6) /* Z2 CT2 out */
+#define PCI230P2_DAC_TRIG_MASK		PCI230P2_DAC_TRIG(7)
+#define PCI230P2_DAC_FIFO_WRAP		BIT(7) /* FIFO wraparound mode */
+#define PCI230P2_DAC_INT_FIFO(x)	(((x) & 7) << 9)
+#define PCI230P2_DAC_INT_FIFO_EMPTY	PCI230P2_DAC_INT_FIFO(0) /* empty */
+#define PCI230P2_DAC_INT_FIFO_NEMPTY	PCI230P2_DAC_INT_FIFO(1) /* !empty */
+#define PCI230P2_DAC_INT_FIFO_NHALF	PCI230P2_DAC_INT_FIFO(2) /* !half */
+#define PCI230P2_DAC_INT_FIFO_HALF	PCI230P2_DAC_INT_FIFO(3) /* half */
+#define PCI230P2_DAC_INT_FIFO_NFULL	PCI230P2_DAC_INT_FIFO(4) /* !full */
+#define PCI230P2_DAC_INT_FIFO_FULL	PCI230P2_DAC_INT_FIFO(5) /* full */
+#define PCI230P2_DAC_INT_FIFO_MASK	PCI230P2_DAC_INT_FIFO(7)
 
 /*
  * DACCON read-only values.
  */
-#define PCI230_DAC_BUSY			(1 << 1) /* DAC busy. */
+#define PCI230_DAC_BUSY			BIT(1) /* DAC busy. */
 /*
  * The following apply only if the DAC FIFO is enabled (and only for PCI230+
  * hardware version 2 onwards).
  */
-#define PCI230P2_DAC_FIFO_UNDERRUN_LATCHED	(1 << 5) /* Underrun error */
-#define PCI230P2_DAC_FIFO_EMPTY		(1 << 13) /* FIFO empty */
-#define PCI230P2_DAC_FIFO_FULL		(1 << 14) /* FIFO full */
-#define PCI230P2_DAC_FIFO_HALF		(1 << 15) /* FIFO half full */
+#define PCI230P2_DAC_FIFO_UNDERRUN_LATCHED	BIT(5) /* Underrun error */
+#define PCI230P2_DAC_FIFO_EMPTY		BIT(13) /* FIFO empty */
+#define PCI230P2_DAC_FIFO_FULL		BIT(14) /* FIFO full */
+#define PCI230P2_DAC_FIFO_HALF		BIT(15) /* FIFO half full */
 
 /*
  * DACCON write-only, transient values.
@@ -286,8 +289,8 @@
  * The following apply only if the DAC FIFO is enabled (and only for PCI230+
  * hardware version 2 onwards).
  */
-#define PCI230P2_DAC_FIFO_UNDERRUN_CLEAR	(1 << 5) /* Clear underrun */
-#define PCI230P2_DAC_FIFO_RESET		(1 << 12) /* FIFO reset */
+#define PCI230P2_DAC_FIFO_UNDERRUN_CLEAR	BIT(5) /* Clear underrun */
+#define PCI230P2_DAC_FIFO_RESET		BIT(12) /* FIFO reset */
 
 /*
  * PCI230+ hardware version 2 DAC FIFO levels.
@@ -304,44 +307,48 @@
 /*
  * ADCCON read/write values.
  */
-#define PCI230_ADC_TRIG_NONE		(0 << 0) /* No trigger */
-#define PCI230_ADC_TRIG_SW		(1 << 0) /* Software trigger trigger */
-#define PCI230_ADC_TRIG_EXTP		(2 << 0) /* EXTTRIG +ve edge trigger */
-#define PCI230_ADC_TRIG_EXTN		(3 << 0) /* EXTTRIG -ve edge trigger */
-#define PCI230_ADC_TRIG_Z2CT0		(4 << 0) /* CT0-OUT +ve edge trigger */
-#define PCI230_ADC_TRIG_Z2CT1		(5 << 0) /* CT1-OUT +ve edge trigger */
-#define PCI230_ADC_TRIG_Z2CT2		(6 << 0) /* CT2-OUT +ve edge trigger */
-#define PCI230_ADC_TRIG_MASK		(7 << 0)
-#define PCI230_ADC_IR_UNI		(0 << 3) /* Input range unipolar */
-#define PCI230_ADC_IR_BIP		(1 << 3) /* Input range bipolar */
-#define PCI230_ADC_IR_MASK		(1 << 3)
-#define PCI230_ADC_IM_SE		(0 << 4) /* Input mode single ended */
-#define PCI230_ADC_IM_DIF		(1 << 4) /* Input mode differential */
-#define PCI230_ADC_IM_MASK		(1 << 4)
-#define PCI230_ADC_FIFO_EN		(1 << 8) /* FIFO enable */
-#define PCI230_ADC_INT_FIFO_EMPTY	(0 << 9)
-#define PCI230_ADC_INT_FIFO_NEMPTY	(1 << 9) /* FIFO interrupt not empty */
-#define PCI230_ADC_INT_FIFO_NHALF	(2 << 9)
-#define PCI230_ADC_INT_FIFO_HALF	(3 << 9) /* FIFO interrupt half full */
-#define PCI230_ADC_INT_FIFO_NFULL	(4 << 9)
-#define PCI230_ADC_INT_FIFO_FULL	(5 << 9) /* FIFO interrupt full */
-#define PCI230P_ADC_INT_FIFO_THRESH	(7 << 9) /* FIFO interrupt threshold */
-#define PCI230_ADC_INT_FIFO_MASK	(7 << 9)
+#define PCI230_ADC_TRIG(x)		(((x) & 0x7) << 0)
+#define PCI230_ADC_TRIG_NONE		PCI230_ADC_TRIG(0) /* none */
+#define PCI230_ADC_TRIG_SW		PCI230_ADC_TRIG(1) /* soft trig */
+#define PCI230_ADC_TRIG_EXTP		PCI230_ADC_TRIG(2) /* ext + edge */
+#define PCI230_ADC_TRIG_EXTN		PCI230_ADC_TRIG(3) /* ext - edge */
+#define PCI230_ADC_TRIG_Z2CT0		PCI230_ADC_TRIG(4) /* Z2 CT0 out*/
+#define PCI230_ADC_TRIG_Z2CT1		PCI230_ADC_TRIG(5) /* Z2 CT1 out */
+#define PCI230_ADC_TRIG_Z2CT2		PCI230_ADC_TRIG(6) /* Z2 CT2 out */
+#define PCI230_ADC_TRIG_MASK		PCI230_ADC_TRIG(7)
+#define PCI230_ADC_IR(x)		(((x) & 0x1) << 3)
+#define PCI230_ADC_IR_UNI		PCI230_ADC_IR(0) /* Input unipolar */
+#define PCI230_ADC_IR_BIP		PCI230_ADC_IR(1) /* Input bipolar */
+#define PCI230_ADC_IR_MASK		PCI230_ADC_IR(1)
+#define PCI230_ADC_IM(x)		(((x) & 0x1) << 4)
+#define PCI230_ADC_IM_SE		PCI230_ADC_IM(0) /* single ended */
+#define PCI230_ADC_IM_DIF		PCI230_ADC_IM(1) /* differential */
+#define PCI230_ADC_IM_MASK		PCI230_ADC_IM(1)
+#define PCI230_ADC_FIFO_EN		BIT(8) /* FIFO enable */
+#define PCI230_ADC_INT_FIFO(x)		(((x) & 0x7) << 9)
+#define PCI230_ADC_INT_FIFO_EMPTY	PCI230_ADC_INT_FIFO(0) /* empty */
+#define PCI230_ADC_INT_FIFO_NEMPTY	PCI230_ADC_INT_FIFO(1) /* !empty */
+#define PCI230_ADC_INT_FIFO_NHALF	PCI230_ADC_INT_FIFO(2) /* !half */
+#define PCI230_ADC_INT_FIFO_HALF	PCI230_ADC_INT_FIFO(3) /* half */
+#define PCI230_ADC_INT_FIFO_NFULL	PCI230_ADC_INT_FIFO(4) /* !full */
+#define PCI230_ADC_INT_FIFO_FULL	PCI230_ADC_INT_FIFO(5) /* full */
+#define PCI230P_ADC_INT_FIFO_THRESH	PCI230_ADC_INT_FIFO(7) /* threshold */
+#define PCI230_ADC_INT_FIFO_MASK	PCI230_ADC_INT_FIFO(7)
 
 /*
  * ADCCON write-only, transient values.
  */
-#define PCI230_ADC_FIFO_RESET		(1 << 12) /* FIFO reset */
-#define PCI230_ADC_GLOB_RESET		(1 << 13) /* Global reset */
+#define PCI230_ADC_FIFO_RESET		BIT(12) /* FIFO reset */
+#define PCI230_ADC_GLOB_RESET		BIT(13) /* Global reset */
 
 /*
  * ADCCON read-only values.
  */
-#define PCI230_ADC_BUSY			(1 << 15) /* ADC busy */
-#define PCI230_ADC_FIFO_EMPTY		(1 << 12) /* FIFO empty */
-#define PCI230_ADC_FIFO_FULL		(1 << 13) /* FIFO full */
-#define PCI230_ADC_FIFO_HALF		(1 << 14) /* FIFO half full */
-#define PCI230_ADC_FIFO_FULL_LATCHED	(1 << 5)  /* FIFO overrun occurred */
+#define PCI230_ADC_BUSY			BIT(15) /* ADC busy */
+#define PCI230_ADC_FIFO_EMPTY		BIT(12) /* FIFO empty */
+#define PCI230_ADC_FIFO_FULL		BIT(13) /* FIFO full */
+#define PCI230_ADC_FIFO_HALF		BIT(14) /* FIFO half full */
+#define PCI230_ADC_FIFO_FULL_LATCHED	BIT(5)  /* FIFO overrun occurred */
 
 /*
  * PCI230 ADC FIFO levels.
@@ -353,10 +360,10 @@
  * PCI230+ EXTFUNC values.
  */
 /* Route EXTTRIG pin to external gate inputs. */
-#define PCI230P_EXTFUNC_GAT_EXTTRIG	(1 << 0)
+#define PCI230P_EXTFUNC_GAT_EXTTRIG	BIT(0)
 /* PCI230+ hardware version 2 values. */
 /* Allow DAC FIFO to be enabled. */
-#define PCI230P2_EXTFUNC_DACFIFO	(1 << 1)
+#define PCI230P2_EXTFUNC_DACFIFO	BIT(1)
 
 /*
  * Counter/timer clock input configuration sources.
@@ -402,20 +409,20 @@ static inline unsigned int pci230_gat_config(unsigned int chan,
  * Interrupt enables/status register values.
  */
 #define PCI230_INT_DISABLE		0
-#define PCI230_INT_PPI_C0		(1 << 0)
-#define PCI230_INT_PPI_C3		(1 << 1)
-#define PCI230_INT_ADC			(1 << 2)
-#define PCI230_INT_ZCLK_CT1		(1 << 5)
+#define PCI230_INT_PPI_C0		BIT(0)
+#define PCI230_INT_PPI_C3		BIT(1)
+#define PCI230_INT_ADC			BIT(2)
+#define PCI230_INT_ZCLK_CT1		BIT(5)
 /* For PCI230+ hardware version 2 when DAC FIFO enabled. */
-#define PCI230P2_INT_DAC		(1 << 4)
+#define PCI230P2_INT_DAC		BIT(4)
 
 /*
  * (Potentially) shared resources and their owners
  */
 enum {
-	RES_Z2CT0 = (1U << 0),	/* Z2-CT0 */
-	RES_Z2CT1 = (1U << 1),	/* Z2-CT1 */
-	RES_Z2CT2 = (1U << 2)	/* Z2-CT2 */
+	RES_Z2CT0 = BIT(0),	/* Z2-CT0 */
+	RES_Z2CT1 = BIT(1),	/* Z2-CT1 */
+	RES_Z2CT2 = BIT(2)	/* Z2-CT2 */
 };
 
 enum {