Commit 6209dd77 authored by David S. Miller's avatar David S. Miller

Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-12-15

This series contains updates to igb, igbvf, igc and ixgbe drivers.

Karen moves checks for invalid VF MAC filters to occur earlier for
igb.

Letu Ren fixes a double free issue in igbvf probe.

Sasha fixes incorrect min value being used when calculating for max for
igc.

Robert Schlabbach adds documentation on enabling NBASE-T support for
ixgbe.

Cyril Novikov adds missing initialization of MDIO bus speed for ixgbe.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents ef8a0f6e bf0a3750
......@@ -440,6 +440,22 @@ NOTE: For 82599-based network connections, if you are enabling jumbo frames in
a virtual function (VF), jumbo frames must first be enabled in the physical
function (PF). The VF MTU setting cannot be larger than the PF MTU.
NBASE-T Support
---------------
The ixgbe driver supports NBASE-T on some devices. However, the advertisement
of NBASE-T speeds is suppressed by default, to accommodate broken network
switches which cannot cope with advertised NBASE-T speeds. Use the ethtool
command to enable advertising NBASE-T speeds on devices which support it::
ethtool -s eth? advertise 0x1800000001028
On Linux systems with INTERFACES(5), this can be specified as a pre-up command
in /etc/network/interfaces so that the interface is always brought up with
NBASE-T support, e.g.::
iface eth? inet dhcp
pre-up ethtool -s eth? advertise 0x1800000001028 || true
Generic Receive Offload, aka GRO
--------------------------------
The driver supports the in-kernel software implementation of GRO. GRO has
......
......@@ -7648,19 +7648,6 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
struct vf_mac_filter *entry = NULL;
int ret = 0;
switch (info) {
case E1000_VF_MAC_FILTER_CLR:
/* remove all unicast MAC filters related to the current VF */
list_for_each(pos, &adapter->vf_macs.l) {
entry = list_entry(pos, struct vf_mac_filter, l);
if (entry->vf == vf) {
entry->vf = -1;
entry->free = true;
igb_del_mac_filter(adapter, entry->vf_mac, vf);
}
}
break;
case E1000_VF_MAC_FILTER_ADD:
if ((vf_data->flags & IGB_VF_FLAG_PF_SET_MAC) &&
!vf_data->trusted) {
dev_warn(&pdev->dev,
......@@ -7675,6 +7662,19 @@ static int igb_set_vf_mac_filter(struct igb_adapter *adapter, const int vf,
return -EINVAL;
}
switch (info) {
case E1000_VF_MAC_FILTER_CLR:
/* remove all unicast MAC filters related to the current VF */
list_for_each(pos, &adapter->vf_macs.l) {
entry = list_entry(pos, struct vf_mac_filter, l);
if (entry->vf == vf) {
entry->vf = -1;
entry->free = true;
igb_del_mac_filter(adapter, entry->vf_mac, vf);
}
}
break;
case E1000_VF_MAC_FILTER_ADD:
/* try to find empty slot in the list */
list_for_each(pos, &adapter->vf_macs.l) {
entry = list_entry(pos, struct vf_mac_filter, l);
......
......@@ -2859,6 +2859,7 @@ static int igbvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
err_hw_init:
netif_napi_del(&adapter->rx_ring->napi);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
......
......@@ -636,7 +636,7 @@ s32 igc_set_ltr_i225(struct igc_hw *hw, bool link)
ltrv = rd32(IGC_LTRMAXV);
if (ltr_max != (ltrv & IGC_LTRMAXV_LTRV_MASK)) {
ltrv = IGC_LTRMAXV_LSNP_REQ | ltr_max |
(scale_min << IGC_LTRMAXV_SCALE_SHIFT);
(scale_max << IGC_LTRMAXV_SCALE_SHIFT);
wr32(IGC_LTRMAXV, ltrv);
}
}
......
......@@ -5531,6 +5531,10 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
if (!speed && hw->mac.ops.get_link_capabilities) {
ret = hw->mac.ops.get_link_capabilities(hw, &speed,
&autoneg);
/* remove NBASE-T speeds from default autonegotiation
* to accommodate broken network switches in the field
* which cannot cope with advertised NBASE-T speeds
*/
speed &= ~(IXGBE_LINK_SPEED_5GB_FULL |
IXGBE_LINK_SPEED_2_5GB_FULL);
}
......
......@@ -3405,6 +3405,9 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
/* flush pending Tx transactions */
ixgbe_clear_tx_pending(hw);
/* set MDIO speed before talking to the PHY in case it's the 1st time */
ixgbe_set_mdio_speed(hw);
/* PHY ops must be identified and initialized prior to reset */
status = hw->phy.ops.init(hw);
if (status == IXGBE_ERR_SFP_NOT_SUPPORTED ||
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment