Commit 6229ed1f authored by Daniel Mack's avatar Daniel Mack Committed by David S. Miller

net: phy: at803x: add suspend/resume callbacks

When WOL is enabled, the chip can't be put into power-down (BMCR_PDOWN)
mode, as that will also switch off the MAC, which consequently leads to
a link loss.

Use BMCR_ISOLATE in that case, which will at least save us some
milliamperes in comparison to normal operation mode.
Signed-off-by: default avatarDaniel Mack <zonque@gmail.com>
Acked-by: default avatarMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0197ffed
...@@ -100,6 +100,45 @@ static void at803x_get_wol(struct phy_device *phydev, ...@@ -100,6 +100,45 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->wolopts |= WAKE_MAGIC; wol->wolopts |= WAKE_MAGIC;
} }
static int at803x_suspend(struct phy_device *phydev)
{
int value;
int wol_enabled;
mutex_lock(&phydev->lock);
value = phy_read(phydev, AT803X_INTR_ENABLE);
wol_enabled = value & AT803X_WOL_ENABLE;
value = phy_read(phydev, MII_BMCR);
if (wol_enabled)
value |= BMCR_ISOLATE;
else
value |= BMCR_PDOWN;
phy_write(phydev, MII_BMCR, value);
mutex_unlock(&phydev->lock);
return 0;
}
static int at803x_resume(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
phy_write(phydev, MII_BMCR, value);
mutex_unlock(&phydev->lock);
return 0;
}
static int at803x_config_init(struct phy_device *phydev) static int at803x_config_init(struct phy_device *phydev)
{ {
int val; int val;
...@@ -161,6 +200,8 @@ static struct phy_driver at803x_driver[] = { ...@@ -161,6 +200,8 @@ static struct phy_driver at803x_driver[] = {
.config_init = at803x_config_init, .config_init = at803x_config_init,
.set_wol = at803x_set_wol, .set_wol = at803x_set_wol,
.get_wol = at803x_get_wol, .get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES, .features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT, .flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg, .config_aneg = genphy_config_aneg,
...@@ -176,6 +217,8 @@ static struct phy_driver at803x_driver[] = { ...@@ -176,6 +217,8 @@ static struct phy_driver at803x_driver[] = {
.config_init = at803x_config_init, .config_init = at803x_config_init,
.set_wol = at803x_set_wol, .set_wol = at803x_set_wol,
.get_wol = at803x_get_wol, .get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES, .features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT, .flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg, .config_aneg = genphy_config_aneg,
...@@ -191,6 +234,8 @@ static struct phy_driver at803x_driver[] = { ...@@ -191,6 +234,8 @@ static struct phy_driver at803x_driver[] = {
.config_init = at803x_config_init, .config_init = at803x_config_init,
.set_wol = at803x_set_wol, .set_wol = at803x_set_wol,
.get_wol = at803x_get_wol, .get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES, .features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT, .flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg, .config_aneg = genphy_config_aneg,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment