octeontx2-pf: Add support for unicast MAC address filtering

Add unicast MAC address filtering support using install flow
message. Total of 8 MCAM entries are allocated for adding
unicast mac filtering rules. If the MCAM allocation fails,
the unicast filtering support will not be advertised.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h

@@ -229,12 +229,21 @@ struct otx2_ptp {
 
 #define OTX2_HW_TIMESTAMP_LEN	8
 
+struct otx2_mac_table {
+	u8 addr[ETH_ALEN];
+	u16 mcam_entry;
+	bool inuse;
+};
+
 struct otx2_flow_config {
 	u16			entry[NPC_MAX_NONCONTIG_ENTRIES];
 	u32			nr_flows;
 #define OTX2_MAX_NTUPLE_FLOWS	32
-#define OTX2_MCAM_COUNT		OTX2_MAX_NTUPLE_FLOWS
+#define OTX2_MAX_UNICAST_FLOWS	8
+#define OTX2_MCAM_COUNT		(OTX2_MAX_NTUPLE_FLOWS + \
+				 OTX2_MAX_UNICAST_FLOWS)
 	u32			ntuple_offset;
+	u32			unicast_offset;
 	u32                     ntuple_max_flows;
 	struct list_head	flow_list;
 };
@@ -251,6 +260,7 @@ struct otx2_nic {
 #define OTX2_FLAG_INTF_DOWN			BIT_ULL(2)
 #define OTX2_FLAG_MCAM_ENTRIES_ALLOC		BIT_ULL(3)
 #define OTX2_FLAG_NTUPLE_SUPPORT		BIT_ULL(4)
+#define OTX2_FLAG_UCAST_FLTR_SUPPORT		BIT_ULL(5)
 #define OTX2_FLAG_RX_PAUSE_ENABLED		BIT_ULL(9)
 #define OTX2_FLAG_TX_PAUSE_ENABLED		BIT_ULL(10)
 	u64			flags;
@@ -279,6 +289,7 @@ struct otx2_nic {
 	struct refill_work	*refill_wrk;
 	struct workqueue_struct	*otx2_wq;
 	struct work_struct	rx_mode_work;
+	struct otx2_mac_table	*mac_table;
 
 	/* Ethtool stuff */
 	u32			msg_enable;
@@ -674,5 +685,7 @@ int otx2_add_flow(struct otx2_nic *pfvf,
 int otx2_remove_flow(struct otx2_nic *pfvf, u32 location);
 int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
 			      struct npc_install_flow_req *req);
+int otx2_del_macfilter(struct net_device *netdev, const u8 *mac);
+int otx2_add_macfilter(struct net_device *netdev, const u8 *mac);
 
 #endif /* OTX2_COMMON_H */

drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c

@@ -46,14 +46,21 @@ int otx2_alloc_mcam_entries(struct otx2_nic *pfvf)
 	rsp = (struct npc_mcam_alloc_entry_rsp *)otx2_mbox_get_rsp
 	       (&pfvf->mbox.mbox, 0, &req->hdr);
 
-	if (rsp->count != req->count)
+	if (rsp->count != req->count) {
 		netdev_info(pfvf->netdev,
 			    "Unable to allocate %d MCAM entries, got %d\n",
 			    req->count, rsp->count);
-
+		/* support only ntuples here */
 		flow_cfg->ntuple_max_flows = rsp->count;
 		flow_cfg->ntuple_offset = 0;
 		pfvf->flags |= OTX2_FLAG_NTUPLE_SUPPORT;
+	} else {
+		flow_cfg->ntuple_offset = 0;
+		flow_cfg->unicast_offset = flow_cfg->ntuple_offset +
+						OTX2_MAX_NTUPLE_FLOWS;
+		pfvf->flags |= OTX2_FLAG_NTUPLE_SUPPORT;
+		pfvf->flags |= OTX2_FLAG_UCAST_FLTR_SUPPORT;
+	}
 
 	for (i = 0; i < rsp->count; i++)
 		flow_cfg->entry[i] = rsp->entry_list[i];
@@ -82,6 +89,11 @@ int otx2_mcam_flow_init(struct otx2_nic *pf)
 	if (err)
 		return err;
 
+	pf->mac_table = devm_kzalloc(pf->dev, sizeof(struct otx2_mac_table)
+					* OTX2_MAX_UNICAST_FLOWS, GFP_KERNEL);
+	if (!pf->mac_table)
+		return -ENOMEM;
+
 	return 0;
 }
 
@@ -90,6 +102,104 @@ void otx2_mcam_flow_del(struct otx2_nic *pf)
 	otx2_destroy_mcam_flows(pf);
 }
 
+/*  On success adds mcam entry
+ *  On failure enable promisous mode
+ */
+static int otx2_do_add_macfilter(struct otx2_nic *pf, const u8 *mac)
+{
+	struct otx2_flow_config *flow_cfg = pf->flow_cfg;
+	struct npc_install_flow_req *req;
+	int err, i;
+
+	if (!(pf->flags & OTX2_FLAG_UCAST_FLTR_SUPPORT))
+		return -ENOMEM;
+
+	/* dont have free mcam entries or uc list is greater than alloted */
+	if (netdev_uc_count(pf->netdev) > OTX2_MAX_UNICAST_FLOWS)
+		return -ENOMEM;
+
+	mutex_lock(&pf->mbox.lock);
+	req = otx2_mbox_alloc_msg_npc_install_flow(&pf->mbox);
+	if (!req) {
+		mutex_unlock(&pf->mbox.lock);
+		return -ENOMEM;
+	}
+
+	/* unicast offset starts with 32 0..31 for ntuple */
+	for (i = 0; i <  OTX2_MAX_UNICAST_FLOWS; i++) {
+		if (pf->mac_table[i].inuse)
+			continue;
+		ether_addr_copy(pf->mac_table[i].addr, mac);
+		pf->mac_table[i].inuse = true;
+		pf->mac_table[i].mcam_entry =
+			flow_cfg->entry[i + flow_cfg->unicast_offset];
+		req->entry =  pf->mac_table[i].mcam_entry;
+		break;
+	}
+
+	ether_addr_copy(req->packet.dmac, mac);
+	eth_broadcast_addr((u8 *)&req->mask.dmac);
+	req->features = BIT_ULL(NPC_DMAC);
+	req->channel = pf->hw.rx_chan_base;
+	req->intf = NIX_INTF_RX;
+	req->op = NIX_RX_ACTION_DEFAULT;
+	req->set_cntr = 1;
+
+	err = otx2_sync_mbox_msg(&pf->mbox);
+	mutex_unlock(&pf->mbox.lock);
+
+	return err;
+}
+
+int otx2_add_macfilter(struct net_device *netdev, const u8 *mac)
+{
+	struct otx2_nic *pf = netdev_priv(netdev);
+
+	return otx2_do_add_macfilter(pf, mac);
+}
+
+static bool otx2_get_mcamentry_for_mac(struct otx2_nic *pf, const u8 *mac,
+				       int *mcam_entry)
+{
+	int i;
+
+	for (i = 0; i < OTX2_MAX_UNICAST_FLOWS; i++) {
+		if (!pf->mac_table[i].inuse)
+			continue;
+
+		if (ether_addr_equal(pf->mac_table[i].addr, mac)) {
+			*mcam_entry = pf->mac_table[i].mcam_entry;
+			pf->mac_table[i].inuse = false;
+			return true;
+		}
+	}
+	return false;
+}
+
+int otx2_del_macfilter(struct net_device *netdev, const u8 *mac)
+{
+	struct otx2_nic *pf = netdev_priv(netdev);
+	struct npc_delete_flow_req *req;
+	int err, mcam_entry;
+
+	/* check does mcam entry exists for given mac */
+	if (!otx2_get_mcamentry_for_mac(pf, mac, &mcam_entry))
+		return 0;
+
+	mutex_lock(&pf->mbox.lock);
+	req = otx2_mbox_alloc_msg_npc_delete_flow(&pf->mbox);
+	if (!req) {
+		mutex_unlock(&pf->mbox.lock);
+		return -ENOMEM;
+	}
+	req->entry = mcam_entry;
+	/* Send message to AF */
+	err = otx2_sync_mbox_msg(&pf->mbox);
+	mutex_unlock(&pf->mbox.lock);
+
+	return err;
+}
+
 static struct otx2_flow *otx2_find_flow(struct otx2_nic *pfvf, u32 location)
 {
 	struct otx2_flow *iter;

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c

@@ -1720,10 +1720,20 @@ static void otx2_do_set_rx_mode(struct work_struct *work)
 	struct otx2_nic *pf = container_of(work, struct otx2_nic, rx_mode_work);
 	struct net_device *netdev = pf->netdev;
 	struct nix_rx_mode *req;
+	bool promisc = false;
 
 	if (!(netdev->flags & IFF_UP))
 		return;
 
+	if ((netdev->flags & IFF_PROMISC) ||
+	    (netdev_uc_count(netdev) > OTX2_MAX_UNICAST_FLOWS)) {
+		promisc = true;
+	}
+
+	/* Write unicast address to mcam entries or del from mcam */
+	if (!promisc && netdev->priv_flags & IFF_UNICAST_FLT)
+		__dev_uc_sync(netdev, otx2_add_macfilter, otx2_del_macfilter);
+
 	mutex_lock(&pf->mbox.lock);
 	req = otx2_mbox_alloc_msg_nix_set_rx_mode(&pf->mbox);
 	if (!req) {
@@ -1733,7 +1743,7 @@ static void otx2_do_set_rx_mode(struct work_struct *work)
 
 	req->mode = NIX_RX_MODE_UCAST;
 
-	if (netdev->flags & IFF_PROMISC)
+	if (promisc)
 		req->mode |= NIX_RX_MODE_PROMISC;
 	else if (netdev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
 		req->mode |= NIX_RX_MODE_ALLMULTI;
@@ -2125,6 +2135,9 @@ static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (pf->flags & OTX2_FLAG_NTUPLE_SUPPORT)
 		netdev->hw_features |= NETIF_F_NTUPLE;
 
+	if (pf->flags & OTX2_FLAG_UCAST_FLTR_SUPPORT)
+		netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	netdev->gso_max_segs = OTX2_MAX_GSO_SEGS;
 	netdev->watchdog_timeo = OTX2_TX_TIMEOUT;