Commit 6408a833 authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare

i2c-algo-pcf: Delete broken 10-bit address support

The 10-bit address support in i2c-algo-pcf is so heavily broken that
it can't have ever been used. Nobody ever complained, so I'll take it
that nobody needs it. Let's just delete it.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent bf3e2d1d
......@@ -203,35 +203,6 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
/* ----- Utility functions
*/
static inline int try_address(struct i2c_algo_pcf_data *adap,
unsigned char addr, int retries)
{
int i, status, ret = -1;
int wfp;
for (i=0;i<retries;i++) {
i2c_outb(adap, addr);
i2c_start(adap);
status = get_pcf(adap, 1);
if ((wfp = wait_for_pin(adap, &status)) >= 0) {
if ((status & I2C_PCF_LRB) == 0) {
i2c_stop(adap);
break; /* success! */
}
}
if (wfp == -EINTR) {
/* arbitration lost */
udelay(adap->udelay);
return -EINTR;
}
i2c_stop(adap);
udelay(adap->udelay);
}
DEB2(if (i) printk(KERN_DEBUG "i2c-algo-pcf.o: needed %d retries for %d\n",i,
addr));
return ret;
}
static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
int count, int last)
{
......@@ -321,47 +292,19 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
}
static inline int pcf_doAddress(struct i2c_algo_pcf_data *adap,
struct i2c_msg *msg, int retries)
static int pcf_doAddress(struct i2c_algo_pcf_data *adap,
struct i2c_msg *msg)
{
unsigned short flags = msg->flags;
unsigned char addr;
int ret;
if ( (flags & I2C_M_TEN) ) {
/* a ten bit address */
addr = 0xf0 | (( msg->addr >> 7) & 0x03);
DEB2(printk(KERN_DEBUG "addr0: %d\n",addr));
/* try extended address code...*/
ret = try_address(adap, addr, retries);
if (ret!=1) {
printk(KERN_ERR "died at extended address code.\n");
return -EREMOTEIO;
}
/* the remaining 8 bit address */
i2c_outb(adap,msg->addr & 0x7f);
/* Status check comes here */
if (ret != 1) {
printk(KERN_ERR "died at 2nd address code.\n");
return -EREMOTEIO;
}
if ( flags & I2C_M_RD ) {
i2c_repstart(adap);
/* okay, now switch into reading mode */
addr |= 0x01;
ret = try_address(adap, addr, retries);
if (ret!=1) {
printk(KERN_ERR "died at extended address code.\n");
return -EREMOTEIO;
}
}
} else { /* normal 7bit address */
addr = ( msg->addr << 1 );
if (flags & I2C_M_RD )
addr = msg->addr << 1;
if (flags & I2C_M_RD)
addr |= 1;
if (flags & I2C_M_REV_DIR_ADDR )
if (flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
i2c_outb(adap, addr);
}
return 0;
}
......@@ -390,7 +333,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
pmsg->flags & I2C_M_RD ? "read" : "write",
pmsg->len, pmsg->addr, i + 1, num);)
ret = pcf_doAddress(adap, pmsg, i2c_adap->retries);
ret = pcf_doAddress(adap, pmsg);
/* Send START */
if (i == 0) {
......@@ -453,7 +396,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
static u32 pcf_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
I2C_FUNC_PROTOCOL_MANGLING;
}
/* -----exported algorithm data: ------------------------------------- */
......@@ -475,9 +418,7 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
/* register new adapter to i2c module... */
adap->algo = &pcf_algo;
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
adap->timeout = 100;
if ((rval = pcf_init_8584(pcf_adap)))
return rval;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment