Merge tag 'ata-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:

 - Fix a compilation warning due to an uninitialized variable in
   ata_sff_lost_interrupt(), from me.

 - Fix invalid internal command tag handling in the sata_dwc_460ex
   driver, from Christian.

 - Disable READ LOG DMA EXT with Samsung 840 EVO SSDs as this command
   causes the drives to hang, from Christian.

 - Change the config option CONFIG_SATA_LPM_POLICY back to its original
   name CONFIG_SATA_LPM_MOBILE_POLICY to avoid potential problems with
   users losing their configuration (as discussed during the merge
   window), from Mario.

* tag 'ata-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back
  ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
  ata: sata_dwc_460ex: Fix crash due to OOB write
  ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()

drivers/ata/Kconfig

@@ -115,14 +115,16 @@ config SATA_AHCI
 
 	  If unsure, say N.
 
-config SATA_LPM_POLICY
+config SATA_MOBILE_LPM_POLICY
 	int "Default SATA Link Power Management policy for low power chipsets"
 	range 0 4
 	default 0
 	depends on SATA_AHCI
 	help
 	  Select the Default SATA Link Power Management (LPM) policy to use
-	  for chipsets / "South Bridges" designated as supporting low power.
+	  for chipsets / "South Bridges" supporting low-power modes. Such
+	  chipsets are typically found on most laptops but desktops and
+	  servers now also widely use chipsets supporting low power modes.
 
 	  The value set has the following meanings:
 		0 => Keep firmware settings

drivers/ata/ahci.c

@@ -1595,7 +1595,7 @@ static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
 static void ahci_update_initial_lpm_policy(struct ata_port *ap,
 					   struct ahci_host_priv *hpriv)
 {
-	int policy = CONFIG_SATA_LPM_POLICY;
+	int policy = CONFIG_SATA_MOBILE_LPM_POLICY;
 
 
 	/* Ignore processing for chipsets that don't use policy */

drivers/ata/ahci.h

@@ -236,7 +236,7 @@ enum {
 	AHCI_HFLAG_NO_WRITE_TO_RO	= (1 << 24), /* don't write to read
 							only registers */
 	AHCI_HFLAG_USE_LPM_POLICY	= (1 << 25), /* chipset that should use
-							SATA_LPM_POLICY
+							SATA_MOBILE_LPM_POLICY
 							as default lpm_policy */
 	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
 							suspend/resume */

drivers/ata/libata-core.c

@@ -4014,6 +4014,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*MX100*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 840 EVO*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_NO_DMA_LOG |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 840*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |

drivers/ata/libata-sff.c

@@ -1634,7 +1634,7 @@ EXPORT_SYMBOL_GPL(ata_sff_interrupt);
 
 void ata_sff_lost_interrupt(struct ata_port *ap)
 {
-	u8 status;
+	u8 status = 0;
 	struct ata_queued_cmd *qc;
 
 	/* Only one outstanding command per SFF channel */

drivers/ata/sata_dwc_460ex.c

@@ -137,7 +137,11 @@ struct sata_dwc_device {
 #endif
 };
 
-#define SATA_DWC_QCMD_MAX	32
+/*
+ * Allow one extra special slot for commands and DMA management
+ * to account for libata internal commands.
+ */
+#define SATA_DWC_QCMD_MAX	(ATA_MAX_QUEUE + 1)
 
 struct sata_dwc_device_port {
 	struct sata_dwc_device	*hsdev;