platform/x86: Add support for Basin Cove power button

This provides a new input driver for supporting the power button on
Basin Cove PMIC, found on Intel Merrifield-based devices.

The driver follows the design used in intel_chtdc_ti_pwrbtn.c module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

drivers/platform/x86/Kconfig

@@ -1263,6 +1263,17 @@ config INTEL_CHTDC_TI_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_chtdc_ti_pwrbtn.
 
+config INTEL_MRFLD_PWRBTN
+	tristate "Intel Merrifield Basin Cove power button driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	depends on INPUT
+	---help---
+	  This option adds a power button driver for Basin Cove PMIC
+	  on Intel Merrifield devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_mrfld_pwrbtn.
+
 config I2C_MULTI_INSTANTIATE
 	tristate "I2C multi instantiate pseudo device driver"
 	depends on I2C && ACPI

drivers/platform/x86/Makefile

@@ -94,6 +94,7 @@ obj-$(CONFIG_PMC_ATOM)		+= pmc_atom.o
 obj-$(CONFIG_MLX_PLATFORM)	+= mlx-platform.o
 obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
 obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
+obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
 obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
 obj-$(CONFIG_INTEL_ATOMISP2_PM)	+= intel_atomisp2_pm.o
 obj-$(CONFIG_PCENGINES_APU2)	+= pcengines-apuv2.o

drivers/platform/x86/intel_mrfld_pwrbtn.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power-button driver for Basin Cove PMIC
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+#define BCOVE_PBSTATUS		0x27
+#define BCOVE_PBSTATUS_PBLVL	BIT(4)	/* 1 - release, 0 - press */
+
+static irqreturn_t mrfld_pwrbtn_interrupt(int irq, void *dev_id)
+{
+	struct input_dev *input = dev_id;
+	struct device *dev = input->dev.parent;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int state;
+	int ret;
+
+	ret = regmap_read(regmap, BCOVE_PBSTATUS, &state);
+	if (ret)
+		return IRQ_NONE;
+
+	dev_dbg(dev, "PBSTATUS=0x%x\n", state);
+	input_report_key(input, KEY_POWER, !(state & BCOVE_PBSTATUS_PBLVL));
+	input_sync(input);
+
+	regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+	return IRQ_HANDLED;
+}
+
+static int mrfld_pwrbtn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct input_dev *input;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+	input->name = pdev->name;
+	input->phys = "power-button/input0";
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+	input_set_capability(input, EV_KEY, KEY_POWER);
+	ret = input_register_device(input);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, pmic->regmap);
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_pwrbtn_interrupt,
+					IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+					input);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(pmic->regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+	regmap_update_bits(pmic->regmap, BCOVE_MPBIRQ, BCOVE_PBIRQ_PBTN, 0);
+
+	device_init_wakeup(dev, true);
+	dev_pm_set_wake_irq(dev, irq);
+	return 0;
+}
+
+static int mrfld_pwrbtn_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	dev_pm_clear_wake_irq(dev);
+	device_init_wakeup(dev, false);
+	return 0;
+}
+
+static const struct platform_device_id mrfld_pwrbtn_id_table[] = {
+	{ .name = "mrfld_bcove_pwrbtn" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_pwrbtn_id_table);
+
+static struct platform_driver mrfld_pwrbtn_driver = {
+	.driver = {
+		.name	= "mrfld_bcove_pwrbtn",
+	},
+	.probe		= mrfld_pwrbtn_probe,
+	.remove		= mrfld_pwrbtn_remove,
+	.id_table	= mrfld_pwrbtn_id_table,
+};
+module_platform_driver(mrfld_pwrbtn_driver);
+
+MODULE_DESCRIPTION("Power-button driver for Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");