Merge tag 'hwmon-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New drivers for Infineon PXE1610 and IRPS5401

 - Minor improvements, cleanup, and fixes in several drivers

* tag 'hwmon-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (33 commits)
  hwmon: (ina3221) Add of_node_put() before return
  hwmon: (gpio-fan) fix sysfs notifications and udev events for gpio-fan alarms
  hwmon: (gpio-fan) move fan_alarm_init after devm_hwmon_device_register_with_groups
  hwmon: (lm90) Introduce function to update configuration register
  hwmon: (lm90) Cache configuration register value
  hwmon: (lm90) Fix max6658 sporadic wrong temperature reading
  hwmon: (nct7904) Changes comments in probe function.
  hwmon: (nct7904) Add error handling in probe function.
  hwmon: Convert remaining drivers to use SPDX identifier
  hwmon: (max6650) Fix unused variable warning
  hwmon: (pmbus/adm1275) Fix power sampling support
  hwmon: (lm90) simplify getting the adapter of a client
  hwmon: (asus_atk0110) no need to check return value of debugfs_create functions
  hwmon: (max6650) Fix minor formatting issues
  hwmon: (max6650) Improve error handling in max6650_update_device
  hwmon: (max6650) Read non-volatile registers only once
  hwmon: (max6650) Convert to use devm_hwmon_device_register_with_info
  hwmon: (max6650) Simplify alarm handling
  hwmon: (max6650) Cache alarm_en register
  hwmon: (max6650) Declare valid as boolean
  ...

Documentation/hwmon/pxe1610

+Kernel driver pxe1610
+=====================
+
+Supported chips:
+  * Infineon PXE1610
+    Prefix: 'pxe1610'
+    Addresses scanned: -
+    Datasheet: Datasheet is not publicly available.
+
+  * Infineon PXE1110
+    Prefix: 'pxe1110'
+    Addresses scanned: -
+    Datasheet: Datasheet is not publicly available.
+
+  * Infineon PXM1310
+    Prefix: 'pxm1310'
+    Addresses scanned: -
+    Datasheet: Datasheet is not publicly available.
+
+Author: Vijay Khemka <vijaykhemka@fb.com>
+
+
+Description
+-----------
+
+PXE1610/PXE1110 are Multi-rail/Multiphase Digital Controllers
+and compliant to
+	-- Intel VR13 DC-DC converter specifications.
+	-- Intel SVID protocol.
+Used for Vcore power regulation for Intel VR13 based microprocessors
+	-- Servers, Workstations, and High-end desktops
+
+PXM1310 is a Multi-rail Controller and it is compliant to
+	-- Intel VR13 DC-DC converter specifications.
+	-- Intel SVID protocol.
+Used for DDR3/DDR4 Memory power regulation for Intel VR13 and
+IMVP8 based systems
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have
+to instantiate devices explicitly.
+
+Example: the following commands will load the driver for an PXE1610
+at address 0x70 on I2C bus #4:
+
+# modprobe pxe1610
+# echo pxe1610 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
+
+It can also be instantiated by declaring in device tree
+
+
+Sysfs attributes
+----------------
+
+curr1_label		"iin"
+curr1_input		Measured input current
+curr1_alarm		Current high alarm
+
+curr[2-4]_label		"iout[1-3]"
+curr[2-4]_input		Measured output current
+curr[2-4]_crit		Critical maximum current
+curr[2-4]_crit_alarm	Current critical high alarm
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_crit		Critical maximum input voltage
+in1_crit_alarm		Input voltage critical high alarm
+
+in[2-4]_label		"vout[1-3]"
+in[2-4]_input		Measured output voltage
+in[2-4]_lcrit		Critical minimum output voltage
+in[2-4]_lcrit_alarm	Output voltage critical low alarm
+in[2-4]_crit		Critical maximum output voltage
+in[2-4]_crit_alarm	Output voltage critical high alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power high alarm
+
+power[2-4]_label	"pout[1-3]"
+power[2-4]_input	Measured output power
+
+temp[1-3]_input		Measured temperature
+temp[1-3]_crit		Critical high temperature
+temp[1-3]_crit_alarm	Chip temperature critical high alarm
+temp[1-3]_max		Maximum temperature
+temp[1-3]_max_alarm	Chip temperature high alarm

drivers/hwmon/adm1029.c

@@ -10,16 +10,6 @@
  * Very rare chip please let me know if you use it
  *
  * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation version 2 of the License
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/module.h>

drivers/hwmon/asus_atk0110.c

@@ -789,33 +789,16 @@ static const struct file_operations atk_debugfs_ggrp_fops = {
 static void atk_debugfs_init(struct atk_data *data)
 {
 	struct dentry *d;
-	struct dentry *f;
 
 	data->debugfs.id = 0;
 
 	d = debugfs_create_dir("asus_atk0110", NULL);
-	if (!d || IS_ERR(d))
-		return;
 
-	f = debugfs_create_x32("id", 0600, d, &data->debugfs.id);
-	if (!f || IS_ERR(f))
-		goto cleanup;
-
-	f = debugfs_create_file_unsafe("gitm", 0400, d, data,
-				       &atk_debugfs_gitm);
-	if (!f || IS_ERR(f))
-		goto cleanup;
-
-	f = debugfs_create_file("ggrp", 0400, d, data,
-				&atk_debugfs_ggrp_fops);
-	if (!f || IS_ERR(f))
-		goto cleanup;
+	debugfs_create_x32("id", 0600, d, &data->debugfs.id);
+	debugfs_create_file_unsafe("gitm", 0400, d, data, &atk_debugfs_gitm);
+	debugfs_create_file("ggrp", 0400, d, data, &atk_debugfs_ggrp_fops);
 
 	data->debugfs.root = d;
-
-	return;
-cleanup:
-	debugfs_remove_recursive(d);
 }
 
 static void atk_debugfs_cleanup(struct atk_data *data)

drivers/hwmon/gpio-fan.c

@@ -54,8 +54,8 @@ static void fan_alarm_notify(struct work_struct *ws)
 	struct gpio_fan_data *fan_data =
 		container_of(ws, struct gpio_fan_data, alarm_work);
 
-	sysfs_notify(&fan_data->dev->kobj, NULL, "fan1_alarm");
-	kobject_uevent(&fan_data->dev->kobj, KOBJ_CHANGE);
+	sysfs_notify(&fan_data->hwmon_dev->kobj, NULL, "fan1_alarm");
+	kobject_uevent(&fan_data->hwmon_dev->kobj, KOBJ_CHANGE);
 }
 
 static irqreturn_t fan_alarm_irq_handler(int irq, void *dev_id)
@@ -510,13 +510,6 @@ static int gpio_fan_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, fan_data);
 	mutex_init(&fan_data->lock);
 
-	/* Configure alarm GPIO if available. */
-	if (fan_data->alarm_gpio) {
-		err = fan_alarm_init(fan_data);
-		if (err)
-			return err;
-	}
-
 	/* Configure control GPIOs if available. */
 	if (fan_data->gpios && fan_data->num_gpios > 0) {
 		if (!fan_data->speed || fan_data->num_speed <= 1)
@@ -524,7 +517,9 @@ static int gpio_fan_probe(struct platform_device *pdev)
 		err = fan_ctrl_init(fan_data);
 		if (err)
 			return err;
-		devm_add_action_or_reset(dev, gpio_fan_stop, fan_data);
+		err = devm_add_action_or_reset(dev, gpio_fan_stop, fan_data);
+		if (err)
+			return err;
 	}
 
 	/* Make this driver part of hwmon class. */
@@ -535,6 +530,13 @@ static int gpio_fan_probe(struct platform_device *pdev)
 	if (IS_ERR(fan_data->hwmon_dev))
 		return PTR_ERR(fan_data->hwmon_dev);
 
+	/* Configure alarm GPIO if available. */
+	if (fan_data->alarm_gpio) {
+		err = fan_alarm_init(fan_data);
+		if (err)
+			return err;
+	}
+
 	/* Optional cooling device register for Device tree platforms */
 	fan_data->cdev = devm_thermal_of_cooling_device_register(dev, np,
 				"gpio-fan", fan_data, &gpio_fan_cool_ops);

drivers/hwmon/hwmon.c

@@ -651,6 +651,12 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata,
 								hwdev, j);
 					if (err) {
 						device_unregister(hdev);
+						/*
+						 * Don't worry about hwdev;
+						 * hwmon_dev_release(), called
+						 * from device_unregister(),
+						 * will free it.
+						 */
 						goto ida_remove;
 					}
 				}

drivers/hwmon/ina3221.c

@@ -713,8 +713,10 @@ static int ina3221_probe_from_dt(struct device *dev, struct ina3221_data *ina)
 
 	for_each_child_of_node(np, child) {
 		ret = ina3221_probe_child_from_dt(dev, child, ina);
-		if (ret)
+		if (ret) {
+			of_node_put(child);
 			return ret;
+		}
 	}
 
 	return 0;

drivers/hwmon/lm90.c

@@ -174,6 +174,7 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm		*/
 #define LM90_HAVE_TEMP3		(1 << 6) /* 3rd temperature sensor	*/
 #define LM90_HAVE_BROKEN_ALERT	(1 << 7) /* Broken alert		*/
+#define LM90_PAUSE_FOR_CONFIG	(1 << 8) /* Pause conversion for config	*/
 
 /* LM90 status */
 #define LM90_STATUS_LTHRM	(1 << 0) /* local THERM limit tripped */
@@ -367,6 +368,7 @@ static const struct lm90_params lm90_params[] = {
 		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
 	},
 	[max6657] = {
+		.flags = LM90_PAUSE_FOR_CONFIG,
 		.alert_alarms = 0x7c,
 		.max_convrate = 8,
 		.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
@@ -457,6 +459,7 @@ struct lm90_data {
 
 	unsigned int update_interval; /* in milliseconds */
 
+	u8 config;		/* Current configuration register value */
 	u8 config_orig;		/* Original configuration register value */
 	u8 convrate_orig;	/* Original conversion rate register value */
 	u16 alert_alarms;	/* Which alarm bits trigger ALERT# */
@@ -540,6 +543,21 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl)
 	return (newh << 8) | l;
 }
 
+static int lm90_update_confreg(struct lm90_data *data, u8 config)
+{
+	if (data->config != config) {
+		int err;
+
+		err = i2c_smbus_write_byte_data(data->client,
+						LM90_REG_W_CONFIG1,
+						config);
+		if (err)
+			return err;
+		data->config = config;
+	}
+	return 0;
+}
+
 /*
  * client->update_lock must be held when calling this function (unless we are
  * in detection or initialization steps), and while a remote channel other
@@ -548,23 +566,39 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl)
  * various registers have different meanings as a result of selecting a
  * non-default remote channel.
  */
-static inline int lm90_select_remote_channel(struct i2c_client *client,
-					     struct lm90_data *data,
-					     int channel)
+static int lm90_select_remote_channel(struct lm90_data *data, int channel)
 {
-	int config;
+	int err = 0;
 
 	if (data->kind == max6696) {
-		config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
-		if (config < 0)
-			return config;
-		config &= ~0x08;
+		u8 config = data->config & ~0x08;
+
 		if (channel)
 			config |= 0x08;
-		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
-					  config);
+		err = lm90_update_confreg(data, config);
 	}
-	return 0;
+	return err;
+}
+
+static int lm90_write_convrate(struct lm90_data *data, int val)
+{
+	u8 config = data->config;
+	int err;
+
+	/* Save config and pause conversion */
+	if (data->flags & LM90_PAUSE_FOR_CONFIG) {
+		err = lm90_update_confreg(data, config | 0x40);
+		if (err < 0)
+			return err;
+	}
+
+	/* Set conv rate */
+	err = i2c_smbus_write_byte_data(data->client, LM90_REG_W_CONVRATE, val);
+
+	/* Revert change to config */
+	lm90_update_confreg(data, config);
+
+	return err;
 }
 
 /*
@@ -587,7 +621,7 @@ static int lm90_set_convrate(struct i2c_client *client, struct lm90_data *data,
 		if (interval >= update_interval * 3 / 4)
 			break;
 
-	err = i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE, i);
+	err = lm90_write_convrate(data, i);
 	data->update_interval = DIV_ROUND_CLOSEST(update_interval, 64);
 	return err;
 }
@@ -658,7 +692,7 @@ static int lm90_update_limits(struct device *dev)
 	}
 
 	if (data->kind == max6696) {
-		val = lm90_select_remote_channel(client, data, 1);
+		val = lm90_select_remote_channel(data, 1);
 		if (val < 0)
 			return val;
 
@@ -682,7 +716,7 @@ static int lm90_update_limits(struct device *dev)
 			return val;
 		data->temp11[REMOTE2_HIGH] = val << 8;
 
-		lm90_select_remote_channel(client, data, 0);
+		lm90_select_remote_channel(data, 0);
 	}
 
 	return 0;
@@ -742,19 +776,19 @@ static int lm90_update_device(struct device *dev)
 		data->alarms = val;	/* lower 8 bit of alarms */
 
 		if (data->kind == max6696) {
-			val = lm90_select_remote_channel(client, data, 1);
+			val = lm90_select_remote_channel(data, 1);
 			if (val < 0)
 				return val;
 
 			val = lm90_read16(client, LM90_REG_R_REMOTE_TEMPH,
 					  LM90_REG_R_REMOTE_TEMPL);
 			if (val < 0) {
-				lm90_select_remote_channel(client, data, 0);
+				lm90_select_remote_channel(data, 0);
 				return val;
 			}
 			data->temp11[REMOTE2_TEMP] = val;
 
-			lm90_select_remote_channel(client, data, 0);
+			lm90_select_remote_channel(data, 0);
 
 			val = lm90_read_reg(client, MAX6696_REG_R_STATUS2);
 			if (val < 0)
@@ -768,15 +802,9 @@ static int lm90_update_device(struct device *dev)
 		 */
 		if (!(data->config_orig & 0x80) &&
 		    !(data->alarms & data->alert_alarms)) {
-			val = lm90_read_reg(client, LM90_REG_R_CONFIG1);
-			if (val < 0)
-				return val;
-
-			if (val & 0x80) {
+			if (data->config & 0x80) {
 				dev_dbg(&client->dev, "Re-enabling ALERT#\n");
-				i2c_smbus_write_byte_data(client,
-							  LM90_REG_W_CONFIG1,
-							  val & ~0x80);
+				lm90_update_confreg(data, data->config & ~0x80);
 			}
 		}
 
@@ -994,7 +1022,7 @@ static int lm90_set_temp11(struct lm90_data *data, int index, long val)
 	else
 		data->temp11[index] = temp_to_s8(val) << 8;
 
-	lm90_select_remote_channel(client, data, index >= 3);
+	lm90_select_remote_channel(data, index >= 3);
 	err = i2c_smbus_write_byte_data(client, regp->high,
 				  data->temp11[index] >> 8);
 	if (err < 0)
@@ -1003,7 +1031,7 @@ static int lm90_set_temp11(struct lm90_data *data, int index, long val)
 		err = i2c_smbus_write_byte_data(client, regp->low,
 						data->temp11[index] & 0xff);
 
-	lm90_select_remote_channel(client, data, 0);
+	lm90_select_remote_channel(data, 0);
 	return err;
 }
 
@@ -1052,9 +1080,9 @@ static int lm90_set_temp8(struct lm90_data *data, int index, long val)
 	else
 		data->temp8[index] = temp_to_s8(val);
 
-	lm90_select_remote_channel(client, data, index >= 6);
+	lm90_select_remote_channel(data, index >= 6);
 	err = i2c_smbus_write_byte_data(client, reg[index], data->temp8[index]);
-	lm90_select_remote_channel(client, data, 0);
+	lm90_select_remote_channel(data, 0);
 
 	return err;
 }
@@ -1593,8 +1621,7 @@ static void lm90_restore_conf(void *_data)
 	struct i2c_client *client = data->client;
 
 	/* Restore initial configuration */
-	i2c_smbus_write_byte_data(client, LM90_REG_W_CONVRATE,
-				  data->convrate_orig);
+	lm90_write_convrate(data, data->convrate_orig);
 	i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
 				  data->config_orig);
 }
@@ -1611,11 +1638,13 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
 	/*
 	 * Start the conversions.
 	 */
-	lm90_set_convrate(client, data, 500);	/* 500ms; 2Hz conversion rate */
 	config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
 	if (config < 0)
 		return config;
 	data->config_orig = config;
+	data->config = config;
+
+	lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */
 
 	/* Check Temperature Range Select */
 	if (data->kind == adt7461 || data->kind == tmp451) {
@@ -1638,8 +1667,7 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data)
 		config &= ~0x08;
 
 	config &= 0xBF;	/* run */
-	if (config != data->config_orig) /* Only write if changed */
-		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
+	lm90_update_confreg(data, config);
 
 	return devm_add_action_or_reset(&client->dev, lm90_restore_conf, data);
 }
@@ -1718,7 +1746,7 @@ static int lm90_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
-	struct i2c_adapter *adapter = to_i2c_adapter(dev->parent);
+	struct i2c_adapter *adapter = client->adapter;
 	struct hwmon_channel_info *info;
 	struct regulator *regulator;
 	struct device *hwmon_dev;
@@ -1873,14 +1901,8 @@ static void lm90_alert(struct i2c_client *client, enum i2c_alert_protocol type,
 
 		if ((data->flags & LM90_HAVE_BROKEN_ALERT) &&
 		    (alarms & data->alert_alarms)) {
-			int config;
-
 			dev_dbg(&client->dev, "Disabling ALERT#\n");
-			config = lm90_read_reg(client, LM90_REG_R_CONFIG1);
-			if (config >= 0)
-				i2c_smbus_write_byte_data(client,
-							  LM90_REG_W_CONFIG1,
-							  config | 0x80);
+			lm90_update_confreg(data, data->config | 0x80);
 		}
 	} else {
 		dev_info(&client->dev, "Everything OK\n");

drivers/hwmon/max6650.c

@@ -92,7 +92,8 @@ module_param(clock, int, 0444);
 #define FAN_RPM_MIN 240
 #define FAN_RPM_MAX 30000
 
-#define DIV_FROM_REG(reg) (1 << (reg & 7))
+#define DIV_FROM_REG(reg)	(1 << ((reg) & 7))
+#define DAC_LIMIT(v12)		((v12) ? 180 : 76)
 
 /*
  * Client data (each client gets its own)
@@ -100,11 +101,9 @@ module_param(clock, int, 0444);
 
 struct max6650_data {
 	struct i2c_client *client;
-	const struct attribute_group *groups[3];
-	struct thermal_cooling_device *cooling_dev;
-	struct mutex update_lock;
+	struct mutex update_lock; /* protect alarm register updates */
 	int nr_fans;
-	char valid; /* zero until following fields are valid */
+	bool valid; /* false until following fields are valid */
 	unsigned long last_updated; /* in jiffies */
 
 	/* register values */
@@ -114,6 +113,7 @@ struct max6650_data {
 	u8 count;
 	u8 dac;
 	u8 alarm;
+	u8 alarm_en;
 	unsigned long cooling_dev_state;
 };
 
@@ -137,41 +137,60 @@ static const struct of_device_id __maybe_unused max6650_dt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, max6650_dt_match);
 
+static int dac_to_pwm(int dac, bool v12)
+{
+	/*
+	 * Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans.
+	 * Lower DAC values mean higher speeds.
+	 */
+	return clamp_val(255 - (255 * dac) / DAC_LIMIT(v12), 0, 255);
+}
+
+static u8 pwm_to_dac(unsigned int pwm, bool v12)
+{
+	int limit = DAC_LIMIT(v12);
+
+	return limit - (limit * pwm) / 255;
+}
+
 static struct max6650_data *max6650_update_device(struct device *dev)
 {
 	struct max6650_data *data = dev_get_drvdata(dev);
 	struct i2c_client *client = data->client;
+	int reg, err = 0;
 	int i;
 
 	mutex_lock(&data->update_lock);
 
 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
-		data->speed = i2c_smbus_read_byte_data(client,
-						       MAX6650_REG_SPEED);
-		data->config = i2c_smbus_read_byte_data(client,
-							MAX6650_REG_CONFIG);
 		for (i = 0; i < data->nr_fans; i++) {
-			data->tach[i] = i2c_smbus_read_byte_data(client,
-								 tach_reg[i]);
+			reg = i2c_smbus_read_byte_data(client, tach_reg[i]);
+			if (reg < 0) {
+				err = reg;
+				goto error;
+			}
+			data->tach[i] = reg;
 		}
-		data->count = i2c_smbus_read_byte_data(client,
-							MAX6650_REG_COUNT);
-		data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
 
 		/*
 		 * Alarms are cleared on read in case the condition that
 		 * caused the alarm is removed. Keep the value latched here
 		 * for providing the register through different alarm files.
 		 */
-		data->alarm |= i2c_smbus_read_byte_data(client,
-							MAX6650_REG_ALARM);
-
+		reg = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM);
+		if (reg < 0) {
+			err = reg;
+			goto error;
+		}
+		data->alarm |= reg;
 		data->last_updated = jiffies;
-		data->valid = 1;
+		data->valid = true;
 	}
 
+error:
 	mutex_unlock(&data->update_lock);
-
+	if (err)
+		data = ERR_PTR(err);
 	return data;
 }
 
@@ -199,26 +218,6 @@ static int max6650_set_operating_mode(struct max6650_data *data, u8 mode)
 	return 0;
 }
 
-static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
-			char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct max6650_data *data = max6650_update_device(dev);
-	int rpm;
-
-	/*
-	 * Calculation details:
-	 *
-	 * Each tachometer counts over an interval given by the "count"
-	 * register (0.25, 0.5, 1 or 2 seconds). This module assumes
-	 * that the fans produce two pulses per revolution (this seems
-	 * to be the most common).
-	 */
-
-	rpm = ((data->tach[attr->index] * 120) / DIV_FROM_REG(data->count));
-	return sprintf(buf, "%d\n", rpm);
-}
-
 /*
  * Set the fan speed to the specified RPM (or read back the RPM setting).
  * This works in closed loop mode only. Use pwm1 for open loop speed setting.
@@ -260,26 +259,6 @@ static ssize_t fan_show(struct device *dev, struct device_attribute *devattr,
  * controlled.
  */
 
-static ssize_t fan1_target_show(struct device *dev,
-				struct device_attribute *devattr, char *buf)
-{
-	struct max6650_data *data = max6650_update_device(dev);
-	int kscale, ktach, rpm;
-
-	/*
-	 * Use the datasheet equation:
-	 *
-	 *    FanSpeed = KSCALE x fCLK / [256 x (KTACH + 1)]
-	 *
-	 * then multiply by 60 to give rpm.
-	 */
-
-	kscale = DIV_FROM_REG(data->config);
-	ktach = data->speed;
-	rpm = 60 * kscale * clock / (256 * (ktach + 1));
-	return sprintf(buf, "%d\n", rpm);
-}
-
 static int max6650_set_target(struct max6650_data *data, unsigned long rpm)
 {
 	int kscale, ktach;
@@ -308,197 +287,8 @@ static int max6650_set_target(struct max6650_data *data, unsigned long rpm)
 					 data->speed);
 }
 
-static ssize_t fan1_target_store(struct device *dev,
-				 struct device_attribute *devattr,
-				 const char *buf, size_t count)
-{
-	struct max6650_data *data = dev_get_drvdata(dev);
-	unsigned long rpm;
-	int err;
-
-	err = kstrtoul(buf, 10, &rpm);
-	if (err)
-		return err;
-
-	mutex_lock(&data->update_lock);
-
-	err = max6650_set_target(data, rpm);
-
-	mutex_unlock(&data->update_lock);
-
-	if (err < 0)
-		return err;
-
-	return count;
-}
-
-/*
- * Get/set the fan speed in open loop mode using pwm1 sysfs file.
- * Speed is given as a relative value from 0 to 255, where 255 is maximum
- * speed. Note that this is done by writing directly to the chip's DAC,
- * it won't change the closed loop speed set by fan1_target.
- * Also note that due to rounding errors it is possible that you don't read
- * back exactly the value you have set.
- */
-
-static ssize_t pwm1_show(struct device *dev, struct device_attribute *devattr,
-			 char *buf)
-{
-	int pwm;
-	struct max6650_data *data = max6650_update_device(dev);
-
-	/*
-	 * Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans.
-	 * Lower DAC values mean higher speeds.
-	 */
-	if (data->config & MAX6650_CFG_V12)
-		pwm = 255 - (255 * (int)data->dac)/180;
-	else
-		pwm = 255 - (255 * (int)data->dac)/76;
-
-	if (pwm < 0)
-		pwm = 0;
-
-	return sprintf(buf, "%d\n", pwm);
-}
-
-static ssize_t pwm1_store(struct device *dev,
-			  struct device_attribute *devattr, const char *buf,
-			  size_t count)
-{
-	struct max6650_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-	unsigned long pwm;
-	int err;
-
-	err = kstrtoul(buf, 10, &pwm);
-	if (err)
-		return err;
-
-	pwm = clamp_val(pwm, 0, 255);
-
-	mutex_lock(&data->update_lock);
-
-	if (data->config & MAX6650_CFG_V12)
-		data->dac = 180 - (180 * pwm)/255;
-	else
-		data->dac = 76 - (76 * pwm)/255;
-	err = i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac);
-
-	mutex_unlock(&data->update_lock);
-
-	return err < 0 ? err : count;
-}
-
 /*
- * Get/Set controller mode:
- * Possible values:
- * 0 = Fan always on
- * 1 = Open loop, Voltage is set according to speed, not regulated.
- * 2 = Closed loop, RPM for all fans regulated by fan1 tachometer
- * 3 = Fan off
- */
-static ssize_t pwm1_enable_show(struct device *dev,
-				struct device_attribute *devattr, char *buf)
-{
-	struct max6650_data *data = max6650_update_device(dev);
-	int mode = (data->config & MAX6650_CFG_MODE_MASK) >> 4;
-	int sysfs_modes[4] = {0, 3, 2, 1};
-
-	return sprintf(buf, "%d\n", sysfs_modes[mode]);
-}
-
-static ssize_t pwm1_enable_store(struct device *dev,
-				 struct device_attribute *devattr,
-				 const char *buf, size_t count)
-{
-	struct max6650_data *data = dev_get_drvdata(dev);
-	unsigned long mode;
-	int err;
-	const u8 max6650_modes[] = {
-		MAX6650_CFG_MODE_ON,
-		MAX6650_CFG_MODE_OPEN_LOOP,
-		MAX6650_CFG_MODE_CLOSED_LOOP,
-		MAX6650_CFG_MODE_OFF,
-		};
-
-	err = kstrtoul(buf, 10, &mode);
-	if (err)
-		return err;
-
-	if (mode >= ARRAY_SIZE(max6650_modes))
-		return -EINVAL;
-
-	mutex_lock(&data->update_lock);
-
-	max6650_set_operating_mode(data, max6650_modes[mode]);
-
-	mutex_unlock(&data->update_lock);
-
-	return count;
-}
-
-/*
- * Read/write functions for fan1_div sysfs file. The MAX6650 has no such
- * divider. We handle this by converting between divider and counttime:
- *
- * (counttime == k) <==> (divider == 2^k), k = 0, 1, 2, or 3
- *
- * Lower values of k allow to connect a faster fan without the risk of
- * counter overflow. The price is lower resolution. You can also set counttime
- * using the module parameter. Note that the module parameter "prescaler" also
- * influences the behaviour. Unfortunately, there's no sysfs attribute
- * defined for that. See the data sheet for details.
- */
-
-static ssize_t fan1_div_show(struct device *dev,
-			     struct device_attribute *devattr, char *buf)
-{
-	struct max6650_data *data = max6650_update_device(dev);
-
-	return sprintf(buf, "%d\n", DIV_FROM_REG(data->count));
-}
-
-static ssize_t fan1_div_store(struct device *dev,
-			      struct device_attribute *devattr,
-			      const char *buf, size_t count)
-{
-	struct max6650_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-	unsigned long div;
-	int err;
-
-	err = kstrtoul(buf, 10, &div);
-	if (err)
-		return err;
-
-	mutex_lock(&data->update_lock);
-	switch (div) {
-	case 1:
-		data->count = 0;
-		break;
-	case 2:
-		data->count = 1;
-		break;
-	case 4:
-		data->count = 2;
-		break;
-	case 8:
-		data->count = 3;
-		break;
-	default:
-		mutex_unlock(&data->update_lock);
-		return -EINVAL;
-	}
-
-	i2c_smbus_write_byte_data(client, MAX6650_REG_COUNT, data->count);
-	mutex_unlock(&data->update_lock);
-
-	return count;
-}
-
-/*
- * Get alarm stati:
+ * Get gpio alarm status:
  * Possible values:
  * 0 = no alarm
  * 1 = alarm
@@ -509,42 +299,30 @@ static ssize_t alarm_show(struct device *dev,
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct max6650_data *data = max6650_update_device(dev);
-	struct i2c_client *client = data->client;
-	int alarm = 0;
+	bool alarm;
 
-	if (data->alarm & attr->index) {
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	alarm = data->alarm & attr->index;
+	if (alarm) {
 		mutex_lock(&data->update_lock);
-		alarm = 1;
 		data->alarm &= ~attr->index;
-		data->alarm |= i2c_smbus_read_byte_data(client,
-							MAX6650_REG_ALARM);
+		data->valid = false;
 		mutex_unlock(&data->update_lock);
 	}
 
 	return sprintf(buf, "%d\n", alarm);
 }
 
-static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
-static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
-static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2);
-static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3);
-static DEVICE_ATTR_RW(fan1_target);
-static DEVICE_ATTR_RW(fan1_div);
-static DEVICE_ATTR_RW(pwm1_enable);
-static DEVICE_ATTR_RW(pwm1);
-static SENSOR_DEVICE_ATTR_RO(fan1_max_alarm, alarm, MAX6650_ALRM_MAX);
-static SENSOR_DEVICE_ATTR_RO(fan1_min_alarm, alarm, MAX6650_ALRM_MIN);
-static SENSOR_DEVICE_ATTR_RO(fan1_fault, alarm, MAX6650_ALRM_TACH);
 static SENSOR_DEVICE_ATTR_RO(gpio1_alarm, alarm, MAX6650_ALRM_GPIO1);
 static SENSOR_DEVICE_ATTR_RO(gpio2_alarm, alarm, MAX6650_ALRM_GPIO2);
 
 static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
-				    int n)
+				     int n)
 {
 	struct device *dev = container_of(kobj, struct device, kobj);
 	struct max6650_data *data = dev_get_drvdata(dev);
-	struct i2c_client *client = data->client;
-	u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
 	struct device_attribute *devattr;
 
 	/*
@@ -552,12 +330,9 @@ static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
 	 */
 
 	devattr = container_of(a, struct device_attribute, attr);
-	if (devattr == &sensor_dev_attr_fan1_max_alarm.dev_attr
-	 || devattr == &sensor_dev_attr_fan1_min_alarm.dev_attr
-	 || devattr == &sensor_dev_attr_fan1_fault.dev_attr
-	 || devattr == &sensor_dev_attr_gpio1_alarm.dev_attr
-	 || devattr == &sensor_dev_attr_gpio2_alarm.dev_attr) {
-		if (!(alarm_en & to_sensor_dev_attr(devattr)->index))
+	if (devattr == &sensor_dev_attr_gpio1_alarm.dev_attr ||
+	    devattr == &sensor_dev_attr_gpio2_alarm.dev_attr) {
+		if (!(data->alarm_en & to_sensor_dev_attr(devattr)->index))
 			return 0;
 	}
 
@@ -565,14 +340,6 @@ static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
 }
 
 static struct attribute *max6650_attrs[] = {
-	&sensor_dev_attr_fan1_input.dev_attr.attr,
-	&dev_attr_fan1_target.attr,
-	&dev_attr_fan1_div.attr,
-	&dev_attr_pwm1_enable.attr,
-	&dev_attr_pwm1.attr,
-	&sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
-	&sensor_dev_attr_fan1_fault.dev_attr.attr,
 	&sensor_dev_attr_gpio1_alarm.dev_attr.attr,
 	&sensor_dev_attr_gpio2_alarm.dev_attr.attr,
 	NULL
@@ -583,27 +350,17 @@ static const struct attribute_group max6650_group = {
 	.is_visible = max6650_attrs_visible,
 };
 
-static struct attribute *max6651_attrs[] = {
-	&sensor_dev_attr_fan2_input.dev_attr.attr,
-	&sensor_dev_attr_fan3_input.dev_attr.attr,
-	&sensor_dev_attr_fan4_input.dev_attr.attr,
+static const struct attribute_group *max6650_groups[] = {
+	&max6650_group,
 	NULL
 };
 
-static const struct attribute_group max6651_group = {
-	.attrs = max6651_attrs,
-};
-
-/*
- * Real code
- */
-
 static int max6650_init_client(struct max6650_data *data,
 			       struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
-	int config;
-	int err = -EIO;
+	int reg;
+	int err;
 	u32 voltage;
 	u32 prescale;
 	u32 target_rpm;
@@ -617,21 +374,20 @@ static int max6650_init_client(struct max6650_data *data,
 				 &prescale))
 		prescale = prescaler;
 
-	config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
-
-	if (config < 0) {
-		dev_err(dev, "Error reading config, aborting.\n");
-		return err;
+	reg = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
+	if (reg < 0) {
+		dev_err(dev, "Error reading config register, aborting.\n");
+		return reg;
 	}
 
 	switch (voltage) {
 	case 0:
 		break;
 	case 5:
-		config &= ~MAX6650_CFG_V12;
+		reg &= ~MAX6650_CFG_V12;
 		break;
 	case 12:
-		config |= MAX6650_CFG_V12;
+		reg |= MAX6650_CFG_V12;
 		break;
 	default:
 		dev_err(dev, "illegal value for fan_voltage (%d)\n", voltage);
@@ -641,22 +397,22 @@ static int max6650_init_client(struct max6650_data *data,
 	case 0:
 		break;
 	case 1:
-		config &= ~MAX6650_CFG_PRESCALER_MASK;
+		reg &= ~MAX6650_CFG_PRESCALER_MASK;
 		break;
 	case 2:
-		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+		reg = (reg & ~MAX6650_CFG_PRESCALER_MASK)
 			 | MAX6650_CFG_PRESCALER_2;
 		break;
 	case  4:
-		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+		reg = (reg & ~MAX6650_CFG_PRESCALER_MASK)
 			 | MAX6650_CFG_PRESCALER_4;
 		break;
 	case  8:
-		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+		reg = (reg & ~MAX6650_CFG_PRESCALER_MASK)
 			 | MAX6650_CFG_PRESCALER_8;
 		break;
 	case 16:
-		config = (config & ~MAX6650_CFG_PRESCALER_MASK)
+		reg = (reg & ~MAX6650_CFG_PRESCALER_MASK)
 			 | MAX6650_CFG_PRESCALER_16;
 		break;
 	default:
@@ -664,16 +420,43 @@ static int max6650_init_client(struct max6650_data *data,
 	}
 
 	dev_info(dev, "Fan voltage: %dV, prescaler: %d.\n",
-		 (config & MAX6650_CFG_V12) ? 12 : 5,
-		 1 << (config & MAX6650_CFG_PRESCALER_MASK));
+		 (reg & MAX6650_CFG_V12) ? 12 : 5,
+		 1 << (reg & MAX6650_CFG_PRESCALER_MASK));
 
-	if (i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, config)) {
+	err = i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, reg);
+	if (err) {
 		dev_err(dev, "Config write error, aborting.\n");
 		return err;
 	}
+	data->config = reg;
 
-	data->config = config;
-	data->count = i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT);
+	reg = i2c_smbus_read_byte_data(client, MAX6650_REG_SPEED);
+	if (reg < 0) {
+		dev_err(dev, "Failed to read speed register, aborting.\n");
+		return reg;
+	}
+	data->speed = reg;
+
+	reg = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
+	if (reg < 0) {
+		dev_err(dev, "Failed to read DAC register, aborting.\n");
+		return reg;
+	}
+	data->dac = reg;
+
+	reg = i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT);
+	if (reg < 0) {
+		dev_err(dev, "Failed to read count register, aborting.\n");
+		return reg;
+	}
+	data->count = reg;
+
+	reg = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
+	if (reg < 0) {
+		dev_err(dev, "Failed to read alarm configuration, aborting.\n");
+		return reg;
+	}
+	data->alarm_en = reg;
 
 	if (!of_property_read_u32(client->dev.of_node, "maxim,fan-target-rpm",
 				  &target_rpm)) {
@@ -684,8 +467,6 @@ static int max6650_init_client(struct max6650_data *data,
 	return 0;
 }
 
-#if IS_ENABLED(CONFIG_THERMAL)
-
 static int max6650_get_max_state(struct thermal_cooling_device *cdev,
 				 unsigned long *state)
 {
@@ -715,23 +496,18 @@ static int max6650_set_cur_state(struct thermal_cooling_device *cdev,
 
 	mutex_lock(&data->update_lock);
 
-	if (data->config & MAX6650_CFG_V12)
-		data->dac = 180 - (180 * state)/255;
-	else
-		data->dac = 76 - (76 * state)/255;
-
+	data->dac = pwm_to_dac(state, data->config & MAX6650_CFG_V12);
 	err = i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac);
-
 	if (!err) {
 		max6650_set_operating_mode(data, state ?
-						   MAX6650_CFG_MODE_OPEN_LOOP :
-						   MAX6650_CFG_MODE_OFF);
+					   MAX6650_CFG_MODE_OPEN_LOOP :
+					   MAX6650_CFG_MODE_OFF);
 		data->cooling_dev_state = state;
 	}
 
 	mutex_unlock(&data->update_lock);
 
-	return err < 0 ? err : 0;
+	return err;
 }
 
 static const struct thermal_cooling_device_ops max6650_cooling_ops = {
@@ -739,11 +515,252 @@ static const struct thermal_cooling_device_ops max6650_cooling_ops = {
 	.get_cur_state = max6650_get_cur_state,
 	.set_cur_state = max6650_set_cur_state,
 };
-#endif
+
+static int max6650_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct max6650_data *data = max6650_update_device(dev);
+	int mode;
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	switch (type) {
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			*val = dac_to_pwm(data->dac,
+					  data->config & MAX6650_CFG_V12);
+			break;
+		case hwmon_pwm_enable:
+			/*
+			 * Possible values:
+			 * 0 = Fan always on
+			 * 1 = Open loop, Voltage is set according to speed,
+			 *     not regulated.
+			 * 2 = Closed loop, RPM for all fans regulated by fan1
+			 *     tachometer
+			 * 3 = Fan off
+			 */
+			mode = (data->config & MAX6650_CFG_MODE_MASK) >> 4;
+			*val = (4 - mode) & 3; /* {0 1 2 3} -> {0 3 2 1} */
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			/*
+			 * Calculation details:
+			 *
+			 * Each tachometer counts over an interval given by the
+			 * "count" register (0.25, 0.5, 1 or 2 seconds).
+			 * The driver assumes that the fans produce two pulses
+			 * per revolution (this seems to be the most common).
+			 */
+			*val = DIV_ROUND_CLOSEST(data->tach[channel] * 120,
+						 DIV_FROM_REG(data->count));
+			break;
+		case hwmon_fan_div:
+			*val = DIV_FROM_REG(data->count);
+			break;
+		case hwmon_fan_target:
+			/*
+			 * Use the datasheet equation:
+			 *    FanSpeed = KSCALE x fCLK / [256 x (KTACH + 1)]
+			 * then multiply by 60 to give rpm.
+			 */
+			*val = 60 * DIV_FROM_REG(data->config) * clock /
+				(256 * (data->speed + 1));
+			break;
+		case hwmon_fan_min_alarm:
+			*val = !!(data->alarm & MAX6650_ALRM_MIN);
+			data->alarm &= ~MAX6650_ALRM_MIN;
+			data->valid = false;
+			break;
+		case hwmon_fan_max_alarm:
+			*val = !!(data->alarm & MAX6650_ALRM_MAX);
+			data->alarm &= ~MAX6650_ALRM_MAX;
+			data->valid = false;
+			break;
+		case hwmon_fan_fault:
+			*val = !!(data->alarm & MAX6650_ALRM_TACH);
+			data->alarm &= ~MAX6650_ALRM_TACH;
+			data->valid = false;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static const u8 max6650_pwm_modes[] = {
+	MAX6650_CFG_MODE_ON,
+	MAX6650_CFG_MODE_OPEN_LOOP,
+	MAX6650_CFG_MODE_CLOSED_LOOP,
+	MAX6650_CFG_MODE_OFF,
+};
+
+static int max6650_write(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	struct max6650_data *data = dev_get_drvdata(dev);
+	int ret = 0;
+	u8 reg;
+
+	mutex_lock(&data->update_lock);
+
+	switch (type) {
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+			reg = pwm_to_dac(clamp_val(val, 0, 255),
+					 data->config & MAX6650_CFG_V12);
+			ret = i2c_smbus_write_byte_data(data->client,
+							MAX6650_REG_DAC, reg);
+			if (ret)
+				break;
+			data->dac = reg;
+			break;
+		case hwmon_pwm_enable:
+			if (val < 0 || val >= ARRAY_SIZE(max6650_pwm_modes)) {
+				ret = -EINVAL;
+				break;
+			}
+			ret = max6650_set_operating_mode(data,
+						max6650_pwm_modes[val]);
+			break;
+		default:
+			ret = -EOPNOTSUPP;
+			break;
+		}
+		break;
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_div:
+			switch (val) {
+			case 1:
+				reg = 0;
+				break;
+			case 2:
+				reg = 1;
+				break;
+			case 4:
+				reg = 2;
+				break;
+			case 8:
+				reg = 3;
+				break;
+			default:
+				ret = -EINVAL;
+				goto error;
+			}
+			ret = i2c_smbus_write_byte_data(data->client,
+							MAX6650_REG_COUNT, reg);
+			if (ret)
+				break;
+			data->count = reg;
+			break;
+		case hwmon_fan_target:
+			if (val < 0) {
+				ret = -EINVAL;
+				break;
+			}
+			ret = max6650_set_target(data, val);
+			break;
+		default:
+			ret = -EOPNOTSUPP;
+			break;
+		}
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+error:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static umode_t max6650_is_visible(const void *_data,
+				  enum hwmon_sensor_types type, u32 attr,
+				  int channel)
+{
+	const struct max6650_data *data = _data;
+
+	if (channel && (channel >= data->nr_fans || type != hwmon_fan))
+		return 0;
+
+	switch (type) {
+	case hwmon_fan:
+		switch (attr) {
+		case hwmon_fan_input:
+			return 0444;
+		case hwmon_fan_target:
+		case hwmon_fan_div:
+			return 0644;
+		case hwmon_fan_min_alarm:
+			if (data->alarm_en & MAX6650_ALRM_MIN)
+				return 0444;
+			break;
+		case hwmon_fan_max_alarm:
+			if (data->alarm_en & MAX6650_ALRM_MAX)
+				return 0444;
+			break;
+		case hwmon_fan_fault:
+			if (data->alarm_en & MAX6650_ALRM_TACH)
+				return 0444;
+			break;
+		default:
+			break;
+		}
+		break;
+	case hwmon_pwm:
+		switch (attr) {
+		case hwmon_pwm_input:
+		case hwmon_pwm_enable:
+			return 0644;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const struct hwmon_channel_info *max6650_info[] = {
+	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_DIV |
+			   HWMON_F_MIN_ALARM | HWMON_F_MAX_ALARM |
+			   HWMON_F_FAULT,
+			   HWMON_F_INPUT, HWMON_F_INPUT, HWMON_F_INPUT),
+	HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
+	NULL
+};
+
+static const struct hwmon_ops max6650_hwmon_ops = {
+	.read = max6650_read,
+	.write = max6650_write,
+	.is_visible = max6650_is_visible,
+};
+
+static const struct hwmon_chip_info max6650_chip_info = {
+	.ops = &max6650_hwmon_ops,
+	.info = max6650_info,
+};
 
 static int max6650_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct thermal_cooling_device *cooling_dev;
 	struct device *dev = &client->dev;
 	const struct of_device_id *of_id =
 		of_match_device(of_match_ptr(max6650_dt_match), dev);
@@ -767,37 +784,23 @@ static int max6650_probe(struct i2c_client *client,
 	if (err)
 		return err;
 
-	data->groups[0] = &max6650_group;
-	/* 3 additional fan inputs for the MAX6651 */
-	if (data->nr_fans == 4)
-		data->groups[1] = &max6651_group;
-
-	hwmon_dev = devm_hwmon_device_register_with_groups(dev,
-							   client->name, data,
-							   data->groups);
+	hwmon_dev = devm_hwmon_device_register_with_info(dev,
+							 client->name, data,
+							 &max6650_chip_info,
+							 max6650_groups);
 	err = PTR_ERR_OR_ZERO(hwmon_dev);
 	if (err)
 		return err;
 
-#if IS_ENABLED(CONFIG_THERMAL)
-	data->cooling_dev =
-		thermal_of_cooling_device_register(client->dev.of_node,
-						   client->name, data,
-						   &max6650_cooling_ops);
-	if (IS_ERR(data->cooling_dev))
-		dev_warn(&client->dev,
-			 "thermal cooling device register failed: %ld\n",
-			 PTR_ERR(data->cooling_dev));
-#endif
-	return 0;
-}
-
-static int max6650_remove(struct i2c_client *client)
-{
-	struct max6650_data *data = i2c_get_clientdata(client);
-
-	if (!IS_ERR(data->cooling_dev))
-		thermal_cooling_device_unregister(data->cooling_dev);
+	if (IS_ENABLED(CONFIG_THERMAL)) {
+		cooling_dev = devm_thermal_of_cooling_device_register(dev,
+						dev->of_node, client->name,
+						data, &max6650_cooling_ops);
+		if (IS_ERR(cooling_dev)) {
+			dev_warn(dev, "thermal cooling device register failed: %ld\n",
+				 PTR_ERR(cooling_dev));
+		}
+	}
 
 	return 0;
 }
@@ -815,7 +818,6 @@ static struct i2c_driver max6650_driver = {
 		.of_match_table = of_match_ptr(max6650_dt_match),
 	},
 	.probe		= max6650_probe,
-	.remove		= max6650_remove,
 	.id_table	= max6650_id,
 };
 

drivers/hwmon/nct7904.c

@@ -4,6 +4,9 @@
  *
  * Copyright (c) 2015 Kontron
  * Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
+ *
+ * Copyright (c) 2019 Advantech
+ * Author: Amy.Shih <amy.shih@advantech.com.tw>
  */
 
 #include <linux/module.h>
@@ -50,6 +53,8 @@
 #define T_CPU1_HV_REG		0xA0	/* Bank 0; 2 regs (HV/LV) per sensor */
 
 #define PRTS_REG		0x03	/* Bank 2 */
+#define PFE_REG			0x00	/* Bank 2; PECI Function Enable */
+#define TSI_CTRL_REG		0x50	/* Bank 2; TSI Control Register */
 #define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */
 #define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */
 
@@ -65,6 +70,8 @@ struct nct7904_data {
 	u32 vsen_mask;
 	u32 tcpu_mask;
 	u8 fan_mode[FANCTL_MAX];
+	u8 enable_dts;
+	u8 has_dts;
 };
 
 /* Access functions */
@@ -229,11 +236,15 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
 
 	switch (attr) {
 	case hwmon_temp_input:
-		if (channel == 0)
+		if (channel == 4)
 			ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG);
+		else if (channel < 5)
+			ret = nct7904_read_reg16(data, BANK_0,
+						 TEMP_CH1_HV_REG + channel * 4);
 		else
 			ret = nct7904_read_reg16(data, BANK_0,
-					T_CPU1_HV_REG + (channel - 1) * 2);
+						 T_CPU1_HV_REG + (channel - 5)
+						 * 2);
 		if (ret < 0)
 			return ret;
 		temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
@@ -249,11 +260,11 @@ static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
 	const struct nct7904_data *data = _data;
 
 	if (attr == hwmon_temp_input) {
-		if (channel == 0) {
-			if (data->vsen_mask & BIT(17))
+		if (channel < 5) {
+			if (data->tcpu_mask & BIT(channel))
 				return 0444;
 		} else {
-			if (data->tcpu_mask & BIT(channel - 1))
+			if (data->has_dts & BIT(channel - 5))
 				return 0444;
 		}
 	}
@@ -460,6 +471,7 @@ static int nct7904_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	int ret, i;
 	u32 mask;
+	u8 val, bit;
 
 	data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL);
 	if (!data)
@@ -493,10 +505,65 @@ static int nct7904_probe(struct i2c_client *client,
 	data->vsen_mask = mask;
 
 	/* CPU_TEMP attributes */
-	ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG);
+	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL0_REG);
+	if (ret < 0)
+		return ret;
+
+	if ((ret & 0x6) == 0x6)
+		data->tcpu_mask |= 1; /* TR1 */
+	if ((ret & 0x18) == 0x18)
+		data->tcpu_mask |= 2; /* TR2 */
+	if ((ret & 0x20) == 0x20)
+		data->tcpu_mask |= 4; /* TR3 */
+	if ((ret & 0x80) == 0x80)
+		data->tcpu_mask |= 8; /* TR4 */
+
+	/* LTD */
+	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG);
+	if (ret < 0)
+		return ret;
+	if ((ret & 0x02) == 0x02)
+		data->tcpu_mask |= 0x10;
+
+	/* Multi-Function detecting for Volt and TR/TD */
+	ret = nct7904_read_reg(data, BANK_0, VT_ADC_MD_REG);
 	if (ret < 0)
 		return ret;
-	data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4);
+
+	for (i = 0; i < 4; i++) {
+		val = (ret & (0x03 << i)) >> (i * 2);
+		bit = (1 << i);
+		if (val == 0)
+			data->tcpu_mask &= ~bit;
+	}
+
+	/* PECI */
+	ret = nct7904_read_reg(data, BANK_2, PFE_REG);
+	if (ret < 0)
+		return ret;
+	if (ret & 0x80) {
+		data->enable_dts = 1; /* Enable DTS & PECI */
+	} else {
+		ret = nct7904_read_reg(data, BANK_2, TSI_CTRL_REG);
+		if (ret < 0)
+			return ret;
+		if (ret & 0x80)
+			data->enable_dts = 0x3; /* Enable DTS & TSI */
+	}
+
+	/* Check DTS enable status */
+	if (data->enable_dts) {
+		ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG);
+		if (ret < 0)
+			return ret;
+		data->has_dts = ret & 0xF;
+		if (data->enable_dts & 0x2) {
+			ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG);
+			if (ret < 0)
+				return ret;
+			data->has_dts |= (ret & 0xF) << 4;
+		}
+	}
 
 	for (i = 0; i < FANCTL_MAX; i++) {
 		ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i);

drivers/hwmon/occ/common.c

@@ -241,6 +241,12 @@ static ssize_t occ_show_temp_1(struct device *dev,
 		val = get_unaligned_be16(&temp->sensor_id);
 		break;
 	case 1:
+		/*
+		 * If a sensor reading has expired and couldn't be refreshed,
+		 * OCC returns 0xFFFF for that sensor.
+		 */
+		if (temp->value == 0xFFFF)
+			return -EREMOTEIO;
 		val = get_unaligned_be16(&temp->value) * 1000;
 		break;
 	default:

drivers/hwmon/pmbus/Kconfig

@@ -64,6 +64,15 @@ config SENSORS_IR38064
 	  This driver can also be built as a module. If so, the module will
 	  be called ir38064.
 
+config SENSORS_IRPS5401
+	tristate "Infineon IRPS5401"
+	help
+	  If you say yes here you get hardware monitoring support for the
+	  Infineon IRPS5401 controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called irps5401.
+
 config SENSORS_ISL68137
 	tristate "Intersil ISL68137"
 	help
@@ -154,6 +163,15 @@ config SENSORS_MAX8688
 	  This driver can also be built as a module. If so, the module will
 	  be called max8688.
 
+config SENSORS_PXE1610
+	tristate "Infineon PXE1610"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  PXE1610.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pxe1610.
+
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
 	help

drivers/hwmon/pmbus/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
 obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
 obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
 obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
+obj-$(CONFIG_SENSORS_IRPS5401)	+= irps5401.o
 obj-$(CONFIG_SENSORS_ISL68137)	+= isl68137.o
 obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
 obj-$(CONFIG_SENSORS_LTC2978)	+= ltc2978.o
@@ -18,6 +19,7 @@ obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
 obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
 obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
 obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
+obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
 obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o

drivers/hwmon/pmbus/adm1275.c

@@ -14,6 +14,8 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/log2.h>
 #include "pmbus.h"
 
 enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
@@ -69,6 +71,18 @@ enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
 #define ADM1075_VAUX_OV_WARN		BIT(7)
 #define ADM1075_VAUX_UV_WARN		BIT(6)
 
+#define ADM1275_VI_AVG_SHIFT		0
+#define ADM1275_VI_AVG_MASK		GENMASK(ADM1275_VI_AVG_SHIFT + 2, \
+						ADM1275_VI_AVG_SHIFT)
+#define ADM1275_SAMPLES_AVG_MAX		128
+
+#define ADM1278_PWR_AVG_SHIFT		11
+#define ADM1278_PWR_AVG_MASK		GENMASK(ADM1278_PWR_AVG_SHIFT + 2, \
+						ADM1278_PWR_AVG_SHIFT)
+#define ADM1278_VI_AVG_SHIFT		8
+#define ADM1278_VI_AVG_MASK		GENMASK(ADM1278_VI_AVG_SHIFT + 2, \
+						ADM1278_VI_AVG_SHIFT)
+
 struct adm1275_data {
 	int id;
 	bool have_oc_fault;
@@ -80,6 +94,7 @@ struct adm1275_data {
 	bool have_pin_min;
 	bool have_pin_max;
 	bool have_temp_max;
+	bool have_power_sampling;
 	struct pmbus_driver_info info;
 };
 
@@ -155,6 +170,62 @@ static const struct coefficients adm1293_coefficients[] = {
 	[18] = { 7658, 0, -3 },		/* power, 21V, irange200 */
 };
 
+static int adm1275_read_pmon_config(const struct adm1275_data *data,
+				    struct i2c_client *client, bool is_power)
+{
+	int shift, ret;
+	u16 mask;
+
+	/*
+	 * The PMON configuration register is a 16-bit register only on chips
+	 * supporting power average sampling. On other chips it is an 8-bit
+	 * register.
+	 */
+	if (data->have_power_sampling) {
+		ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
+		mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
+		shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
+	} else {
+		ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+		mask = ADM1275_VI_AVG_MASK;
+		shift = ADM1275_VI_AVG_SHIFT;
+	}
+	if (ret < 0)
+		return ret;
+
+	return (ret & mask) >> shift;
+}
+
+static int adm1275_write_pmon_config(const struct adm1275_data *data,
+				     struct i2c_client *client,
+				     bool is_power, u16 word)
+{
+	int shift, ret;
+	u16 mask;
+
+	if (data->have_power_sampling) {
+		ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
+		mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
+		shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
+	} else {
+		ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+		mask = ADM1275_VI_AVG_MASK;
+		shift = ADM1275_VI_AVG_SHIFT;
+	}
+	if (ret < 0)
+		return ret;
+
+	word = (ret & ~mask) | ((word << shift) & mask);
+	if (data->have_power_sampling)
+		ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG,
+						word);
+	else
+		ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG,
+						word);
+
+	return ret;
+}
+
 static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 {
 	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
@@ -233,6 +304,21 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 		if (!data->have_temp_max)
 			return -ENXIO;
 		break;
+	case PMBUS_VIRT_POWER_SAMPLES:
+		if (!data->have_power_sampling)
+			return -ENXIO;
+		ret = adm1275_read_pmon_config(data, client, true);
+		if (ret < 0)
+			break;
+		ret = BIT(ret);
+		break;
+	case PMBUS_VIRT_IN_SAMPLES:
+	case PMBUS_VIRT_CURR_SAMPLES:
+		ret = adm1275_read_pmon_config(data, client, false);
+		if (ret < 0)
+			break;
+		ret = BIT(ret);
+		break;
 	default:
 		ret = -ENODATA;
 		break;
@@ -277,6 +363,19 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
 	case PMBUS_VIRT_RESET_TEMP_HISTORY:
 		ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
 		break;
+	case PMBUS_VIRT_POWER_SAMPLES:
+		if (!data->have_power_sampling)
+			return -ENXIO;
+		word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
+		ret = adm1275_write_pmon_config(data, client, true,
+						ilog2(word));
+		break;
+	case PMBUS_VIRT_IN_SAMPLES:
+	case PMBUS_VIRT_CURR_SAMPLES:
+		word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
+		ret = adm1275_write_pmon_config(data, client, false,
+						ilog2(word));
+		break;
 	default:
 		ret = -ENODATA;
 		break;
@@ -430,7 +529,8 @@ static int adm1275_probe(struct i2c_client *client,
 	info->format[PSC_CURRENT_OUT] = direct;
 	info->format[PSC_POWER] = direct;
 	info->format[PSC_TEMPERATURE] = direct;
-	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_SAMPLES;
 
 	info->read_word_data = adm1275_read_word_data;
 	info->read_byte_data = adm1275_read_byte_data;
@@ -471,6 +571,7 @@ static int adm1275_probe(struct i2c_client *client,
 		data->have_vout = true;
 		data->have_pin_max = true;
 		data->have_temp_max = true;
+		data->have_power_sampling = true;
 
 		coefficients = adm1272_coefficients;
 		vindex = (config & ADM1275_VRANGE) ? 1 : 0;
@@ -556,6 +657,7 @@ static int adm1275_probe(struct i2c_client *client,
 		data->have_vout = true;
 		data->have_pin_max = true;
 		data->have_temp_max = true;
+		data->have_power_sampling = true;
 
 		coefficients = adm1278_coefficients;
 		vindex = 0;
@@ -591,6 +693,7 @@ static int adm1275_probe(struct i2c_client *client,
 		data->have_pin_min = true;
 		data->have_pin_max = true;
 		data->have_mfr_vaux_status = true;
+		data->have_power_sampling = true;
 
 		coefficients = adm1293_coefficients;
 

drivers/hwmon/pmbus/irps5401.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for the Infineon IRPS5401M PMIC.
+ *
+ * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
+ *
+ * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however
+ * this driver does not currently support them.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define IRPS5401_SW_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | \
+			  PMBUS_HAVE_STATUS_INPUT | \
+			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+			  PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+			  PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+			  PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+#define IRPS5401_LDO_FUNC (PMBUS_HAVE_VIN | \
+			   PMBUS_HAVE_STATUS_INPUT | \
+			   PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+			   PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+static struct pmbus_driver_info irps5401_info = {
+	.pages = 5,
+	.func[0] = IRPS5401_SW_FUNC,
+	.func[1] = IRPS5401_SW_FUNC,
+	.func[2] = IRPS5401_SW_FUNC,
+	.func[3] = IRPS5401_SW_FUNC,
+	.func[4] = IRPS5401_LDO_FUNC,
+};
+
+static int irps5401_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	return pmbus_do_probe(client, id, &irps5401_info);
+}
+
+static const struct i2c_device_id irps5401_id[] = {
+	{"irps5401", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, irps5401_id);
+
+static struct i2c_driver irps5401_driver = {
+	.driver = {
+		   .name = "irps5401",
+		   },
+	.probe = irps5401_probe,
+	.remove = pmbus_do_remove,
+	.id_table = irps5401_id,
+};
+
+module_i2c_driver(irps5401_driver);
+
+MODULE_AUTHOR("Robert Hancock");
+MODULE_DESCRIPTION("PMBus driver for Infineon IRPS5401");
+MODULE_LICENSE("GPL");

drivers/hwmon/pmbus/pxe1610.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon PXE1610
+ *
+ * Copyright (c) 2019 Facebook Inc
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define PXE1610_NUM_PAGES 3
+
+/* Identify chip parameters. */
+static int pxe1610_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
+		u8 vout_mode;
+		int ret;
+
+		/* Read the register with VOUT scaling value.*/
+		ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+		if (ret < 0)
+			return ret;
+
+		vout_mode = ret & GENMASK(4, 0);
+
+		switch (vout_mode) {
+		case 1:
+			info->vrm_version = vr12;
+			break;
+		case 2:
+			info->vrm_version = vr13;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info pxe1610_info = {
+	.pages = PXE1610_NUM_PAGES,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[1] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[2] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.identify = pxe1610_identify,
+};
+
+static int pxe1610_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct pmbus_driver_info *info;
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(
+			client->adapter,
+			I2C_FUNC_SMBUS_READ_BYTE_DATA
+			| I2C_FUNC_SMBUS_READ_WORD_DATA
+			| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	/*
+	 * By default this device doesn't boot to page 0, so set page 0
+	 * to access all pmbus registers.
+	 */
+	i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+	/* Read Manufacturer id */
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
+		return ret;
+	}
+	if (ret != 2 || strncmp(buf, "XP", 2)) {
+		dev_err(&client->dev, "MFR_ID unrecognized\n");
+		return -ENODEV;
+	}
+
+	info = devm_kmemdup(&client->dev, &pxe1610_info,
+			    sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	return pmbus_do_probe(client, id, info);
+}
+
+static const struct i2c_device_id pxe1610_id[] = {
+	{"pxe1610", 0},
+	{"pxe1110", 0},
+	{"pxm1310", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pxe1610_id);
+
+static struct i2c_driver pxe1610_driver = {
+	.driver = {
+			.name = "pxe1610",
+			},
+	.probe = pxe1610_probe,
+	.remove = pmbus_do_remove,
+	.id_table = pxe1610_id,
+};
+
+module_i2c_driver(pxe1610_driver);
+
+MODULE_AUTHOR("Vijay Khemka <vijaykhemka@fb.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
+MODULE_LICENSE("GPL");

drivers/hwmon/pwm-fan.c

@@ -320,8 +320,10 @@ static int pwm_fan_probe(struct platform_device *pdev)
 			dev_err(dev, "Failed to enable fan supply: %d\n", ret);
 			return ret;
 		}
-		devm_add_action_or_reset(dev, pwm_fan_regulator_disable,
-					 ctx->reg_en);
+		ret = devm_add_action_or_reset(dev, pwm_fan_regulator_disable,
+					       ctx->reg_en);
+		if (ret)
+			return ret;
 	}
 
 	ctx->pwm_value = MAX_PWM;
@@ -337,7 +339,9 @@ static int pwm_fan_probe(struct platform_device *pdev)
 		return ret;
 	}
 	timer_setup(&ctx->rpm_timer, sample_timer, 0);
-	devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx);
+	ret = devm_add_action_or_reset(dev, pwm_fan_pwm_disable, ctx);
+	if (ret)
+		return ret;
 
 	of_property_read_u32(dev->of_node, "pulses-per-revolution", &ppr);
 	ctx->pulses_per_revolution = ppr;

drivers/hwmon/scpi-hwmon.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * System Control and Power Interface(SCPI) based hwmon sensor driver
  *
  * Copyright (C) 2015 ARM Ltd.
  * Punit Agrawal <punit.agrawal@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
  */
 
 #include <linux/hwmon.h>

drivers/hwmon/smsc47m1.c

@@ -351,6 +351,8 @@ static ssize_t fan_div_store(struct device *dev,
 		tmp |= data->fan_div[2] << 4;
 		smsc47m1_write_value(data, SMSC47M2_REG_FANDIV3, tmp);
 		break;
+	default:
+		BUG();
 	}
 
 	/* Preserve fan min */