Commit 64cd04d0 authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle

MIPS: Alchemy: Basic support for the DB1300 board.

Signed-off-by: default avatarManuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2867/
Patchwork: https://patchwork.linux-mips.org/patch/2919/
Patchwork: https://patchwork.linux-mips.org/patch/2928/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 809f36c6
......@@ -49,6 +49,14 @@ config MIPS_DB1200
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1300
bool "NetLogic DB1300 board"
select ALCHEMY_GPIOINT_AU1300
select DMA_COHERENT
select MIPS_DISABLE_OBSOLETE_IDE
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_DB1500
bool "Alchemy DB1500 board"
select ALCHEMY_GPIOINT_AU1000
......
......@@ -67,6 +67,13 @@ platform-$(CONFIG_MIPS_DB1200) += alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
#
# NetLogic DBAu1300 development platform
#
platform-$(CONFIG_MIPS_DB1300) += alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000
#
# 4G-Systems eval board
#
......
......@@ -11,5 +11,6 @@ obj-$(CONFIG_MIPS_PB1550) += pb1550/
obj-$(CONFIG_MIPS_DB1000) += db1x00/
obj-$(CONFIG_MIPS_DB1100) += db1x00/
obj-$(CONFIG_MIPS_DB1200) += db1200/
obj-$(CONFIG_MIPS_DB1300) += db1300.o
obj-$(CONFIG_MIPS_DB1500) += db1x00/
obj-$(CONFIG_MIPS_DB1550) += db1x00/
This diff is collapsed.
......@@ -61,5 +61,9 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
#ifdef CONFIG_MIPS_DB1300
alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
#else
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
#endif
}
......@@ -2,6 +2,9 @@
void putc(char c)
{
/* all current (Jan. 2010) in-kernel boards */
#ifdef CONFIG_MIPS_DB1300
alchemy_uart_putchar(AU1300_UART2_PHYS_ADDR, c);
#else
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
#endif
}
CONFIG_MIPS=y
CONFIG_MIPS_ALCHEMY=y
CONFIG_ALCHEMY_GPIOINT_AU1300=y
CONFIG_MIPS_DB1300=y
CONFIG_SOC_AU1300=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_DMA_COHERENT=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
CONFIG_CPU_MIPS32_R1=y
CONFIG_SYS_SUPPORTS_ZBOOT=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_CPU_MIPS32=y
CONFIG_CPU_MIPSR1=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_32BIT=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
CONFIG_64BIT_PHYS_ADDR=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_HZ_100=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_HZ=100
CONFIG_PREEMPT_NONE=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_IRQ_WORK=y
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-db1300"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_LZMA=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_HAVE_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_TINY_RCU=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_IOSCHED_NOOP=y
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_INLINE_SPIN_UNLOCK=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_MMU=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_TRAD_SIGNALS=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_INET_TUNNEL=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_UB=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECS=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_SCSI_MOD=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_PHYLIB=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_SMSC911X=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_WM97XX=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_AU1550=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_AU1550=y
CONFIG_SPI_BITBANG=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_SENSORS_ADM1025=y
CONFIG_FB=y
CONFIG_FB_AU1200=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_ACORN_8x8=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_CACHE_LZO=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_AU1XPSC=y
CONFIG_SND_SOC_AU1XPSC_I2S=y
CONFIG_SND_SOC_AU1XPSC_AC97=y
CONFIG_SND_SOC_DB1300=y
CONFIG_SND_SOC_I2C_AND_SPI=y
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM9712=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
CONFIG_USB_HID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_AU1XXX=y
CONFIG_EXT2_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_GENERIC_ACL=y
CONFIG_FAT_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
CONFIG_JFFS2_CMODE_PRIORITY=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="video=au1200fb:panel:bs console=tty console=ttyS2,115200"
CONFIG_DEBUG_ZBOOT=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
CONFIG_BITREVERSE=y
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
......@@ -34,6 +34,8 @@
#define PB1200_BCSR_PHYS_ADDR 0x0D800000
#define PB1200_BCSR_HEXLED_OFS 0x00400000
#define DB1300_BCSR_PHYS_ADDR 0x19800000
#define DB1300_BCSR_HEXLED_OFS 0x00400000
enum bcsr_id {
/* BCSR base 1 */
......@@ -105,6 +107,7 @@ enum bcsr_whoami_boards {
BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1,
BCSR_WHOAMI_PB1200_DDR2,
BCSR_WHOAMI_DB1200,
BCSR_WHOAMI_DB1300,
};
/* STATUS reg. Unless otherwise noted, they're valid on all boards.
......@@ -118,12 +121,12 @@ enum bcsr_whoami_boards {
#define BCSR_STATUS_SRAMWIDTH 0x0080
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_ROMBUSY 0x0400
#define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */
#define BCSR_STATUS_SD0WP 0x0400 /* DB1200/DB1300:SD1 */
#define BCSR_STATUS_SD1WP 0x0800
#define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */
#define BCSR_STATUS_DB1000_SWAPBOOT 0x2000
#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */
#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */
#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200/1300 */
#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200/1300 */
#define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */
#define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */
#define BCSR_STATUS_FLASHDEN 0xC000
......@@ -133,6 +136,11 @@ enum bcsr_whoami_boards {
#define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */
#define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */
#define BCSR_STATUS_CFWP 0x4000 /* DB1300 */
#define BCSR_STATUS_USBOCn 0x2000 /* DB1300 */
#define BCSR_STATUS_OTGOCn 0x1000 /* DB1300 */
#define BCSR_STATUS_DCDMARQ 0x0010 /* DB1300 */
#define BCSR_STATUS_IDEDMARQ 0x0020 /* DB1300 */
/* DB/PB1000,1100,1500,1550 */
#define BCSR_RESETS_PHY0 0x0001
......@@ -160,12 +168,12 @@ enum bcsr_whoami_boards {
#define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */
/* DB/PB1200 */
/* DB/PB1200/1300 */
#define BCSR_RESETS_ETH 0x0001
#define BCSR_RESETS_CAMERA 0x0002
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
#define BCSR_RESETS_TV 0x0010 /* DB1200 */
#define BCSR_RESETS_TV 0x0010 /* DB1200/1300 */
/* Not resets but in the same register */
#define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */
#define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */
......@@ -174,13 +182,22 @@ enum bcsr_whoami_boards {
#define BCSR_RESETS_SPISEL 0x4000
#define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */
#define BCSR_RESETS_VDDQSHDN 0x0200 /* DB1300 */
#define BCSR_RESETS_OTPPGM 0x0400 /* DB1300 */
#define BCSR_RESETS_OTPSCLK 0x0800 /* DB1300 */
#define BCSR_RESETS_OTPWRPROT 0x1000 /* DB1300 */
#define BCSR_RESETS_OTPCSB 0x2000 /* DB1300 */
#define BCSR_RESETS_OTGPWR 0x4000 /* DB1300 */
#define BCSR_RESETS_USBHPWR 0x8000 /* DB1300 */
#define BCSR_BOARD_LCDVEE 0x0001
#define BCSR_BOARD_LCDVDD 0x0002
#define BCSR_BOARD_LCDBL 0x0004
#define BCSR_BOARD_CAMSNAP 0x0010
#define BCSR_BOARD_CAMPWR 0x0020
#define BCSR_BOARD_SD0PWR 0x0040
#define BCSR_BOARD_CAMCS 0x0010 /* DB1300 */
#define BCSR_BOARD_HDMI_DE 0x0040 /* DB1300 */
#define BCSR_SWITCHES_DIP 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
......@@ -214,7 +231,10 @@ enum bcsr_whoami_boards {
#define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */
#define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */
#define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */
#define BCSR_SYSTEM_DEBUGCSMASK 0x003F /* DB1300 */
#define BCSR_SYSTEM_UDMAMODE 0x0100 /* DB1300 */
#define BCSR_SYSTEM_WAKEONIRQ 0x0200 /* DB1300 */
#define BCSR_SYSTEM_VDDI1300 0x3C00 /* DB1300 */
......
/*
* NetLogic DB1300 board constants
*/
#ifndef _DB1300_H_
#define _DB1300_H_
/* FPGA (external mux) interrupt sources */
#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1)
#define DB1300_IDE_INT (DB1300_FIRST_INT + 0)
#define DB1300_ETH_INT (DB1300_FIRST_INT + 1)
#define DB1300_CF_INT (DB1300_FIRST_INT + 2)
#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4)
#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5)
#define DB1300_DC_INT (DB1300_FIRST_INT + 6)
#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7)
#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8)
#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9)
#define DB1300_AC97_INT (DB1300_FIRST_INT + 10)
#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11)
#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12)
#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13)
#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14)
#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
#define DB1300_LAST_INT (DB1300_FIRST_INT + 15)
/* SMSC9210 CS */
#define DB1300_ETH_PHYS_ADDR 0x19000000
#define DB1300_ETH_PHYS_END 0x197fffff
/* ATA CS */
#define DB1300_IDE_PHYS_ADDR 0x18800000
#define DB1300_IDE_REG_SHIFT 5
#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT)
/* NAND CS */
#define DB1300_NAND_PHYS_ADDR 0x20000000
#define DB1300_NAND_PHYS_END 0x20000fff
#endif /* _DB1300_H_ */
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 by Ralf Baechle
*/
#ifndef __ASM_MACH_GENERIC_IRQ_H
#define __ASM_MACH_GENERIC_IRQ_H
#ifdef NR_IRQS
#undef NR_IRQS
#endif
#ifndef MIPS_CPU_IRQ_BASE
#define MIPS_CPU_IRQ_BASE 0
#endif
/* 8 (MIPS) + 128 (au1300) + 16 (cpld) */
#define NR_IRQS 152
#endif /* __ASM_MACH_GENERIC_IRQ_H */
......@@ -161,8 +161,8 @@ config PCMCIA_ALCHEMY_DEVBOARD
select 64BIT_PHYS_ADDR
help
Enable this driver of you want PCMCIA support on your Alchemy
Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
NOT suitable for the PB1000!
Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
board. NOT suitable for the PB1000!
This driver is also available as a module called db1xxx_ss.ko
......
......@@ -7,7 +7,7 @@
/* This is a fairly generic PCMCIA socket driver suitable for the
* following Alchemy Development boards:
* Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
* Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200, Db1300
*
* The Db1000 is used as a reference: Per-socket card-, carddetect- and
* statuschange IRQs connected to SoC GPIOs, control and status register
......@@ -18,6 +18,7 @@
* - Pb1100/Pb1500: single socket only; voltage key bits VS are
* at STATUS[5:4] (instead of STATUS[1:0]).
* - Au1200-based: additional card-eject irqs, irqs not gpios!
* - Db1300: Db1200-like, no pwr ctrl, single socket (#1).
*/
#include <linux/delay.h>
......@@ -59,11 +60,17 @@ struct db1x_pcmcia_sock {
#define BOARD_TYPE_DEFAULT 0 /* most boards */
#define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */
#define BOARD_TYPE_PB1100 2 /* VS bits slightly different */
#define BOARD_TYPE_DB1300 3 /* no power control */
int board_type;
};
#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
static int db1300_card_inserted(struct db1x_pcmcia_sock *sock)
{
return bcsr_read(BCSR_SIGSTAT) & (1 << 8);
}
/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
{
......@@ -84,6 +91,8 @@ static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
switch (sock->board_type) {
case BOARD_TYPE_DB1200:
return db1200_card_inserted(sock);
case BOARD_TYPE_DB1300:
return db1300_card_inserted(sock);
default:
return db1000_card_inserted(sock);
}
......@@ -160,7 +169,8 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
* ejection handler have been registered and the currently
* active one disabled.
*/
if (sock->board_type == BOARD_TYPE_DB1200) {
if ((sock->board_type == BOARD_TYPE_DB1200) ||
(sock->board_type == BOARD_TYPE_DB1300)) {
ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_insert", sock);
if (ret)
......@@ -174,7 +184,7 @@ static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
}
/* enable the currently silent one */
if (db1200_card_inserted(sock))
if (db1x_card_inserted(sock))
enable_irq(sock->eject_irq);
else
enable_irq(sock->insert_irq);
......@@ -270,6 +280,7 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
}
/* create new voltage code */
if (sock->board_type != BOARD_TYPE_DB1300)
cr_set |= ((v << 2) | p) << (sock->nr * 8);
changed = state->flags ^ sock->old_flags;
......@@ -343,6 +354,10 @@ static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
/* if Vcc is not zero, we have applied power to a card */
status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
/* DB1300: power always on, but don't tell when no card present */
if ((sock->board_type == BOARD_TYPE_DB1300) && (status & SS_DETECT))
status = SS_POWERON | SS_3VCARD | SS_DETECT;
/* reset de-asserted? then we're ready */
status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
......@@ -419,6 +434,9 @@ static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
sock->board_type = BOARD_TYPE_DB1200;
break;
case BCSR_WHOAMI_DB1300:
sock->board_type = BOARD_TYPE_DB1300;
break;
default:
printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
ret = -ENODEV;
......
......@@ -639,6 +639,42 @@ static struct panel_settings known_lcd_panels[] =
856, 856,
480, 480,
},
[9] = {
.name = "DB1300_800x480",
.monspecs = {
.modedb = NULL,
.modedb_len = 0,
.hfmin = 30000,
.hfmax = 70000,
.vfmin = 60,
.vfmax = 60,
.dclkmin = 6000000,
.dclkmax = 28000000,
.input = FB_DISP_RGB,
},
.mode_screen = LCD_SCREEN_SX_N(800) |
LCD_SCREEN_SY_N(480),
.mode_horztiming = LCD_HORZTIMING_HPW_N(5) |
LCD_HORZTIMING_HND1_N(16) |
LCD_HORZTIMING_HND2_N(8),
.mode_verttiming = LCD_VERTTIMING_VPW_N(4) |
LCD_VERTTIMING_VND1_N(8) |
LCD_VERTTIMING_VND2_N(5),
.mode_clkcontrol = LCD_CLKCONTROL_PCD_N(1) |
LCD_CLKCONTROL_IV |
LCD_CLKCONTROL_IH,
.mode_pwmdiv = 0x00000000,
.mode_pwmhi = 0x00000000,
.mode_outmask = 0x00FFFFFF,
.mode_fifoctrl = 0x2f2f2f2f,
.mode_toyclksrc = 0x00000004, /* AUXPLL directly */
.mode_backlight = 0x00000000,
.mode_auxpll = (48/12) * 2,
.device_init = board_au1200fb_panel_init,
.device_shutdown = board_au1200fb_panel_shutdown,
800, 800,
480, 480,
},
};
#define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
......
......@@ -51,12 +51,14 @@ config SND_SOC_DB1000
of boards (DB1000/DB1500/DB1100).
config SND_SOC_DB1200
tristate "DB1200 AC97+I2S audio support"
tristate "DB1200/DB1300 Audio support"
depends on SND_SOC_AU1XPSC
select SND_SOC_AU1XPSC_AC97
select SND_SOC_AC97_CODEC
select SND_SOC_WM9712
select SND_SOC_AU1XPSC_I2S
select SND_SOC_WM8731
help
Select this option to enable audio (AC97 or I2S) on the
Alchemy/AMD/RMI DB1200 demoboard.
Select this option to enable audio (AC97 and I2S) on the
Alchemy/AMD/RMI/NetLogic Db1200 and Db1300 evaluation boards.
If you need Db1300 touchscreen support, you definitely want to say Y.
/*
* DB1200 ASoC audio fabric support code.
* DB1200/DB1300 ASoC audio fabric support code.
*
* (c) 2008-2011 Manuel Lauss <manuel.lauss@googlemail.com>
*
......@@ -28,6 +28,12 @@ static struct platform_device_id db1200_pids[] = {
}, {
.name = "db1200-i2s",
.driver_data = 1,
}, {
.name = "db1300-ac97",
.driver_data = 2,
}, {
.name = "db1300-i2s",
.driver_data = 3,
},
{},
};
......@@ -49,6 +55,21 @@ static struct snd_soc_card db1200_ac97_machine = {
.num_links = 1,
};
static struct snd_soc_dai_link db1300_ac97_dai = {
.name = "AC97",
.stream_name = "AC97 HiFi",
.codec_dai_name = "wm9712-hifi",
.cpu_dai_name = "au1xpsc_ac97.1",
.platform_name = "au1xpsc-pcm.1",
.codec_name = "wm9712-codec.1",
};
static struct snd_soc_card db1300_ac97_machine = {
.name = "DB1300_AC97",
.dai_link = &db1300_ac97_dai,
.num_links = 1,
};
/*------------------------- I2S PART ---------------------------*/
static int db1200_i2s_startup(struct snd_pcm_substream *substream)
......@@ -98,11 +119,29 @@ static struct snd_soc_card db1200_i2s_machine = {
.num_links = 1,
};
static struct snd_soc_dai_link db1300_i2s_dai = {
.name = "WM8731",
.stream_name = "WM8731 PCM",
.codec_dai_name = "wm8731-hifi",
.cpu_dai_name = "au1xpsc_i2s.2",
.platform_name = "au1xpsc-pcm.2",
.codec_name = "wm8731.0-001b",
.ops = &db1200_i2s_wm8731_ops,
};
static struct snd_soc_card db1300_i2s_machine = {
.name = "DB1300_I2S",
.dai_link = &db1300_i2s_dai,
.num_links = 1,
};
/*------------------------- COMMON PART ---------------------------*/
static struct snd_soc_card *db1200_cards[] __devinitdata = {
&db1200_ac97_machine,
&db1200_i2s_machine,
&db1300_ac97_machine,
&db1300_i2s_machine,
};
static int __devinit db1200_audio_probe(struct platform_device *pdev)
......@@ -147,5 +186,5 @@ module_init(db1200_audio_load);
module_exit(db1200_audio_unload);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("DB1200 ASoC audio support");
MODULE_DESCRIPTION("DB1200/DB1300 ASoC audio support");
MODULE_AUTHOR("Manuel Lauss");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment