crypto/nx: Initialize 842 high and normal RxFIFO control registers

NX increments readOffset by FIFO size in receive FIFO control register
when CRB is read. But the index in RxFIFO has to match with the
corresponding entry in FIFO maintained by VAS in kernel. Otherwise NX
may be processing incorrect CRBs and can cause CRB timeout.

VAS FIFO offset is 0 when the receive window is opened during
initialization. When the module is reloaded or in kexec boot, readOffset
in FIFO control register may not match with VAS entry. This patch adds
nx_coproc_init OPAL call to reset readOffset and queued entries in FIFO
control register for both high and normal FIFOs.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
[mpe: Fixup uninitialized variable warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/include/asm/opal-api.h

@@ -209,7 +209,8 @@
 #define OPAL_SENSOR_GROUP_ENABLE		163
 #define OPAL_PCI_GET_PBCQ_TUNNEL_BAR		164
 #define OPAL_PCI_SET_PBCQ_TUNNEL_BAR		165
-#define OPAL_LAST				165
+#define	OPAL_NX_COPROC_INIT			167
+#define OPAL_LAST				167
 
 #define QUIESCE_HOLD			1 /* Spin all calls at entry */
 #define QUIESCE_REJECT			2 /* Fail all calls with OPAL_BUSY */

arch/powerpc/include/asm/opal.h

@@ -293,6 +293,7 @@ int opal_get_power_shift_ratio(u32 handle, int token, u32 *psr);
 int opal_set_power_shift_ratio(u32 handle, int token, u32 psr);
 int opal_sensor_group_clear(u32 group_hndl, int token);
 int opal_sensor_group_enable(u32 group_hndl, int token, bool enable);
+int opal_nx_coproc_init(uint32_t chip_id, uint32_t ct);
 
 s64 opal_signal_system_reset(s32 cpu);
 s64 opal_quiesce(u64 shutdown_type, s32 cpu);

arch/powerpc/platforms/powernv/opal-wrappers.S

@@ -330,3 +330,4 @@ OPAL_CALL(opal_pci_get_pbcq_tunnel_bar,		OPAL_PCI_GET_PBCQ_TUNNEL_BAR);
 OPAL_CALL(opal_pci_set_pbcq_tunnel_bar,		OPAL_PCI_SET_PBCQ_TUNNEL_BAR);
 OPAL_CALL(opal_sensor_read_u64,			OPAL_SENSOR_READ_U64);
 OPAL_CALL(opal_sensor_group_enable,		OPAL_SENSOR_GROUP_ENABLE);
+OPAL_CALL(opal_nx_coproc_init,			OPAL_NX_COPROC_INIT);

arch/powerpc/platforms/powernv/opal.c

@@ -1090,3 +1090,5 @@ EXPORT_SYMBOL_GPL(opal_write_oppanel_async);
 EXPORT_SYMBOL_GPL(opal_int_set_mfrr);
 EXPORT_SYMBOL_GPL(opal_int_eoi);
 EXPORT_SYMBOL_GPL(opal_error_code);
+/* Export the below symbol for NX compression */
+EXPORT_SYMBOL(opal_nx_coproc_init);

drivers/crypto/nx/nx-842-powernv.c

@@ -24,6 +24,8 @@
 #include <asm/icswx.h>
 #include <asm/vas.h>
 #include <asm/reg.h>
+#include <asm/opal-api.h>
+#include <asm/opal.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Dan Streetman <ddstreet@ieee.org>");
@@ -753,7 +755,7 @@ static int nx842_open_percpu_txwins(void)
 }
 
 static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
-					int vasid)
+					int vasid, int *ct)
 {
 	struct vas_window *rxwin = NULL;
 	struct vas_rx_win_attr rxattr;
@@ -837,6 +839,15 @@ static int __init vas_cfg_coproc_info(struct device_node *dn, int chip_id,
 	coproc->vas.id = vasid;
 	nx842_add_coprocs_list(coproc, chip_id);
 
+	/*
+	 * (lpid, pid, tid) combination has to be unique for each
+	 * coprocessor instance in the system. So to make it
+	 * unique, skiboot uses coprocessor type such as 842 or
+	 * GZIP for pid and provides this value to kernel in pid
+	 * device-tree property.
+	 */
+	*ct = pid;
+
 	return 0;
 
 err_out:
@@ -850,6 +861,7 @@ static int __init nx842_powernv_probe_vas(struct device_node *pn)
 	struct device_node *dn;
 	int chip_id, vasid, ret = 0;
 	int nx_fifo_found = 0;
+	int uninitialized_var(ct);
 
 	chip_id = of_get_ibm_chip_id(pn);
 	if (chip_id < 0) {
@@ -865,7 +877,7 @@ static int __init nx842_powernv_probe_vas(struct device_node *pn)
 
 	for_each_child_of_node(pn, dn) {
 		if (of_device_is_compatible(dn, "ibm,p9-nx-842")) {
-			ret = vas_cfg_coproc_info(dn, chip_id, vasid);
+			ret = vas_cfg_coproc_info(dn, chip_id, vasid, &ct);
 			if (ret) {
 				of_node_put(dn);
 				return ret;
@@ -876,8 +888,21 @@ static int __init nx842_powernv_probe_vas(struct device_node *pn)
 
 	if (!nx_fifo_found) {
 		pr_err("NX842 FIFO nodes are missing\n");
-		ret = -EINVAL;
+		return -EINVAL;
+	}
+
+	/*
+	 * Initialize NX instance for both high and normal priority FIFOs.
+	 */
+	if (opal_check_token(OPAL_NX_COPROC_INIT)) {
+		ret = opal_nx_coproc_init(chip_id, ct);
+		if (ret) {
+			pr_err("Failed to initialize NX for chip(%d): %d\n",
+				chip_id, ret);
+			ret = opal_error_code(ret);
 		}
+	} else
+		pr_warn("Firmware doesn't support NX initialization\n");
 
 	return ret;
 }