Commit 6586c5d7 authored by Marc Kleine-Budde's avatar Marc Kleine-Budde

can: Kconfig: convert 'depends on CAN_DEV' into 'if CAN_DEV...endif' block

This patch adds an 'if CAN_DEV...endif' Block around the CAN driver
symbols in drivers/net/can/Kconfig. So the 'depends on CAN' dependencies
can be removed.
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 77136836
......@@ -36,9 +36,10 @@ config CAN_DEV
support. This is the standard library for CAN drivers.
If unsure, say Y.
if CAN_DEV
config CAN_CALC_BITTIMING
bool "CAN bit-timing calculation"
depends on CAN_DEV
default y
---help---
If enabled, CAN bit-timing parameters will be calculated for the
......@@ -52,13 +53,13 @@ config CAN_CALC_BITTIMING
config CAN_AT91
tristate "Atmel AT91 onchip CAN controller"
depends on CAN_DEV && (ARCH_AT91SAM9263 || ARCH_AT91SAM9X5)
depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9X5
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263
and AT91SAM9X5 processors.
config CAN_TI_HECC
depends on CAN_DEV && ARCH_OMAP3
depends on ARCH_OMAP3
tristate "TI High End CAN Controller"
---help---
Driver for TI HECC (High End CAN Controller) module found on many
......@@ -66,12 +67,12 @@ config CAN_TI_HECC
config CAN_MCP251X
tristate "Microchip MCP251x SPI CAN controllers"
depends on CAN_DEV && SPI && HAS_DMA
depends on SPI && HAS_DMA
---help---
Driver for the Microchip MCP251x SPI CAN controllers.
config CAN_BFIN
depends on CAN_DEV && (BF534 || BF536 || BF537 || BF538 || BF539 || BF54x)
depends on BF534 || BF536 || BF537 || BF538 || BF539 || BF54x
tristate "Analog Devices Blackfin on-chip CAN"
---help---
Driver for the Analog Devices Blackfin on-chip CAN controllers
......@@ -81,7 +82,7 @@ config CAN_BFIN
config CAN_JANZ_ICAN3
tristate "Janz VMOD-ICAN3 Intelligent CAN controller"
depends on CAN_DEV && MFD_JANZ_CMODIO
depends on MFD_JANZ_CMODIO
---help---
Driver for Janz VMOD-ICAN3 Intelligent CAN controller module, which
connects to a MODULbus carrier board.
......@@ -94,13 +95,13 @@ config HAVE_CAN_FLEXCAN
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
depends on CAN_DEV && HAVE_CAN_FLEXCAN
depends on HAVE_CAN_FLEXCAN
---help---
Say Y here if you want to support for Freescale FlexCAN.
config PCH_CAN
tristate "Intel EG20T PCH CAN controller"
depends on CAN_DEV && PCI
depends on PCI
---help---
This driver is for PCH CAN of Topcliff (Intel EG20T PCH) which
is an IOH for x86 embedded processor (Intel Atom E6xx series).
......@@ -108,7 +109,7 @@ config PCH_CAN
config CAN_GRCAN
tristate "Aeroflex Gaisler GRCAN and GRHCAN CAN devices"
depends on CAN_DEV && OF
depends on OF
---help---
Say Y here if you want to use Aeroflex Gaisler GRCAN or GRHCAN.
Note that the driver supports little endian, even though little
......@@ -127,6 +128,8 @@ source "drivers/net/can/usb/Kconfig"
source "drivers/net/can/softing/Kconfig"
endif
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
---help---
......
menuconfig CAN_C_CAN
tristate "Bosch C_CAN/D_CAN devices"
depends on CAN_DEV && HAS_IOMEM
depends on HAS_IOMEM
if CAN_C_CAN
......
menuconfig CAN_CC770
tristate "Bosch CC770 and Intel AN82527 devices"
depends on CAN_DEV && HAS_IOMEM
depends on HAS_IOMEM
if CAN_CC770
......
config CAN_MSCAN
depends on CAN_DEV && (PPC || M68K)
depends on PPC || M68K
tristate "Support for Freescale MSCAN based chips"
---help---
The Motorola Scalable Controller Area Network (MSCAN) definition
......
menuconfig CAN_SJA1000
tristate "Philips/NXP SJA1000 devices"
depends on CAN_DEV && HAS_IOMEM
depends on HAS_IOMEM
if CAN_SJA1000
......
config CAN_SOFTING
tristate "Softing Gmbh CAN generic support"
depends on CAN_DEV && HAS_IOMEM
depends on HAS_IOMEM
---help---
Support for CAN cards from Softing Gmbh & some cards
from Vector Gmbh.
......
menu "CAN USB interfaces"
depends on USB && CAN_DEV
depends on USB
config CAN_EMS_USB
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment