Commit 6614a6dc authored by Francois Romieu's avatar Francois Romieu Committed by Jeff Garzik

[PATCH] sis190: make 10Mbps the default when handling the StationControl register

This patch does three things:
- widen the access to the StationControl register (note the SIS_W16
  versus SIS_W32 change);
- default to 10Mbps half duplex when the LPA can not be evaluated
  (reg31->ctl is identical for both). It can be argued that it makes
  sense as the lowest common denominator when everything else failed.
  Btw it works better than the current code. :o)
- remove some enums: they do not document anymore.
Signed-off-by: default avatarFrancois Romieu <romieu@fr.zoreil.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 900eb9d6
......@@ -179,14 +179,6 @@ enum sis190_register_content {
TxInterFrameGapShift = 24,
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
/* StationControl */
_1000bpsF = 0x1c00,
_1000bpsH = 0x0c00,
_100bpsF = 0x1800,
_100bpsH = 0x0800,
_10bpsF = 0x1400,
_10bpsH = 0x0400,
LinkStatus = 0x02, // unused
FullDup = 0x01, // unused
......@@ -886,11 +878,6 @@ static void sis190_hw_start(struct net_device *dev)
SIS_W32(IntrStatus, 0xffffffff);
SIS_W32(IntrMask, 0x0);
/*
* Default is 100Mbps.
* A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09
*/
SIS_W16(StationControl, 0x1901);
SIS_W32(GMIIControl, 0x0);
SIS_W32(TxMacControl, 0x60);
SIS_W16(RxMacControl, 0x02);
......@@ -937,28 +924,22 @@ static void sis190_phy_task(void * data)
/* Rejoice ! */
struct {
int val;
u32 ctl;
const char *msg;
u16 ctl;
} reg31[] = {
{ LPA_1000XFULL | LPA_SLCT,
"1000 Mbps Full Duplex",
0x01 | _1000bpsF },
{ LPA_1000XHALF | LPA_SLCT,
"1000 Mbps Half Duplex",
0x01 | _1000bpsH },
{ LPA_100FULL,
"100 Mbps Full Duplex",
0x01 | _100bpsF },
{ LPA_100HALF,
"100 Mbps Half Duplex",
0x01 | _100bpsH },
{ LPA_10FULL,
"10 Mbps Full Duplex",
0x01 | _10bpsF },
{ LPA_10HALF,
"10 Mbps Half Duplex",
0x01 | _10bpsH },
{ 0, "unknown", 0x0000 }
{ LPA_1000XFULL | LPA_SLCT, 0x07000c00 | 0x00001000,
"1000 Mbps Full Duplex" },
{ LPA_1000XHALF | LPA_SLCT, 0x07000c00,
"1000 Mbps Half Duplex" },
{ LPA_100FULL, 0x04000800 | 0x00001000,
"100 Mbps Full Duplex" },
{ LPA_100HALF, 0x04000800,
"100 Mbps Half Duplex" },
{ LPA_10FULL, 0x04000400 | 0x00001000,
"10 Mbps Full Duplex" },
{ LPA_10HALF, 0x04000400,
"10 Mbps Half Duplex" },
{ 0, 0x04000400, "unknown" }
}, *p;
u16 adv;
......@@ -972,12 +953,15 @@ static void sis190_phy_task(void * data)
val &= adv;
for (p = reg31; p->ctl; p++) {
for (p = reg31; p->val; p++) {
if ((val & p->val) == p->val)
break;
}
if (p->ctl)
SIS_W16(StationControl, p->ctl);
p->ctl |= SIS_R32(StationControl) & ~0x0f001c00;
SIS_W32(StationControl, p->ctl);
net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
p->msg);
netif_carrier_on(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment