Skip to content

L
linux
Commit 662d20b3 authored by Aleksa Savic's avatar Aleksa Savic Committed by Guenter Roeck
Browse files
Options

hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets 

Add support for reading and writing temperature sensor offsets
on the Aquacomputer D5 Next, Farbwerk 360, Octo and Quadro,
for which the needed offsets are known. Implemented by
Leonard Anderweit [1].

[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/22

Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: default avatarAleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20221024151039.7222-1-savicaleksa83@gmail.comSigned-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
parent 6d270868
Hide whitespace changes
Inline Side-by-side
Showing with 75 additions and 14 deletions
Documentation/hwmon/aquacomputer_d5next.rst
View file @ 662d20b3
......@@ -62,6 +62,7 @@ Sysfs entries
================ ==============================================================
temp[1-20]_input Physical/virtual temperature sensors (in millidegrees Celsius)
temp[1-4]_offset Temperature sensor correction offset (in millidegrees Celsius)
fan[1-8]_input Pump/fan speed (in RPM) / Flow speed (in dL/h)
power[1-8]_input Pump/fan power (in micro Watts)
in[0-7]_input Pump/fan voltage (in milli Volts)
......
drivers/hwmon/aquacomputer_d5next.c
View file @ 662d20b3
......@@ -80,6 +80,7 @@ static u8 secondary_ctrl_report[] = {
#define D5NEXT_5V_VOLTAGE 0x39
#define D5NEXT_12V_VOLTAGE 0x37
#define D5NEXT_CTRL_REPORT_SIZE 0x329
#define D5NEXT_TEMP_CTRL_OFFSET 0x2D
static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
......@@ -94,6 +95,8 @@ static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
#define FARBWERK360_SENSOR_START 0x32
#define FARBWERK360_NUM_VIRTUAL_SENSORS 16
#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a
#define FARBWERK360_CTRL_REPORT_SIZE 0x682
#define FARBWERK360_TEMP_CTRL_OFFSET 0x8
/* Register offsets for the Octo fan controller */
#define OCTO_POWER_CYCLES 0x18
......@@ -103,6 +106,7 @@ static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
#define OCTO_NUM_VIRTUAL_SENSORS 16
#define OCTO_VIRTUAL_SENSORS_START 0x45
#define OCTO_CTRL_REPORT_SIZE 0x65F
#define OCTO_TEMP_CTRL_OFFSET 0xA
static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
/* Fan speed registers in Octo control report (from 0-100%) */
......@@ -117,6 +121,7 @@ static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0
#define QUADRO_VIRTUAL_SENSORS_START 0x3c
#define QUADRO_CTRL_REPORT_SIZE 0x3c1
#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
#define QUADRO_TEMP_CTRL_OFFSET 0xA
static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
/* Fan speed registers in Quadro control report (from 0-100%) */
......@@ -282,6 +287,7 @@ struct aqc_data {
int temp_sensor_start_offset;
int num_virtual_temp_sensors;
int virtual_temp_sensor_start_offset;
u16 temp_ctrl_offset;
u16 power_cycle_count_offset;
u8 flow_sensor_offset;
......@@ -365,8 +371,8 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
return ret;
}
/* Refreshes the control buffer and returns value at offset */
static int aqc_get_ctrl_val(struct aqc_data *priv, int offset)
/* Refreshes the control buffer and stores value at offset in val */
static int aqc_get_ctrl_val(struct aqc_data *priv, int offset, long *val)
{
int ret;
......@@ -376,7 +382,7 @@ static int aqc_get_ctrl_val(struct aqc_data *priv, int offset)
if (ret < 0)
goto unlock_and_return;
ret = get_unaligned_be16(priv->buffer + offset);
*val = (s16)get_unaligned_be16(priv->buffer + offset);
unlock_and_return:
mutex_unlock(&priv->mutex);
......@@ -393,7 +399,7 @@ static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val)
if (ret < 0)
goto unlock_and_return;
put_unaligned_be16((u16)val, priv->buffer + offset);
put_unaligned_be16((s16)val, priv->buffer + offset);
ret = aqc_send_ctrl_data(priv);
......@@ -408,8 +414,28 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
switch (type) {
case hwmon_temp:
if (channel < priv->num_temp_sensors) {
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
case hwmon_temp_offset:
if (priv->temp_ctrl_offset != 0)
return 0644;
break;
default:
break;
}
}
if (channel < priv->num_temp_sensors + priv->num_virtual_temp_sensors)
return 0444;
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
default:
break;
}
break;
case hwmon_pwm:
if (priv->fan_ctrl_offsets && channel < priv->num_fans) {
......@@ -492,10 +518,25 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
switch (type) {
case hwmon_temp:
if (priv->temp_input[channel] == -ENODATA)
return -ENODATA;
switch (attr) {
case hwmon_temp_input:
if (priv->temp_input[channel] == -ENODATA)
return -ENODATA;
*val = priv->temp_input[channel];
break;
case hwmon_temp_offset:
ret =
aqc_get_ctrl_val(priv, priv->temp_ctrl_offset +
channel * AQC_TEMP_SENSOR_SIZE, val);
if (ret < 0)
return ret;
*val = priv->temp_input[channel];
*val *= 10;
break;
default:
break;
}
break;
case hwmon_fan:
*val = priv->speed_input[channel];
......@@ -505,7 +546,7 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
break;
case hwmon_pwm:
if (priv->fan_ctrl_offsets) {
ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel]);
ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel], val);
if (ret < 0)
return ret;
......@@ -563,6 +604,21 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
struct aqc_data *priv = dev_get_drvdata(dev);
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_offset:
/* Limit temp offset to +/- 15K as in the official software */
val = clamp_val(val, -15000, 15000) / 10;
ret =
aqc_set_ctrl_val(priv, priv->temp_ctrl_offset +
channel * AQC_TEMP_SENSOR_SIZE, val);
if (ret < 0)
return ret;
break;
default:
return -EOPNOTSUPP;
}
break;
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
......@@ -597,10 +653,10 @@ static const struct hwmon_ops aqc_hwmon_ops = {
static const struct hwmon_channel_info *aqc_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
......@@ -853,6 +909,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->virtual_temp_sensor_start_offset = D5NEXT_VIRTUAL_SENSORS_START;
priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = D5NEXT_TEMP_CTRL_OFFSET;
priv->temp_label = label_d5next_temp;
priv->virtual_temp_label = label_virtual_temp_sensors;
......@@ -877,7 +934,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START;
priv->num_virtual_temp_sensors = FARBWERK360_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = FARBWERK360_VIRTUAL_SENSORS_START;
priv->buffer_size = FARBWERK360_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = FARBWERK360_TEMP_CTRL_OFFSET;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
break;
......@@ -893,6 +951,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
......@@ -914,6 +973,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
priv->temp_ctrl_offset = QUADRO_TEMP_CTRL_OFFSET;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7