ARM: Remove PicoXcell platform support

PicoXcell has had nothing but treewide cleanups for at least the last 8
years and no signs of activity. The most recent activity is a yocto vendor
kernel based on v3.0 in 2015.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20201210200315.2965567-3-robh@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

MAINTAINERS

@@ -13984,15 +13984,6 @@ L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/hid/hid-picolcd*
 
-PICOXCELL SUPPORT
-M:	Jamie Iles <jamie@jamieiles.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
-T:	git git://github.com/jamieiles/linux-2.6-ji.git
-F:	arch/arm/boot/dts/picoxcell*
-F:	arch/arm/mach-picoxcell/
-F:	drivers/crypto/picoxcell*
-
 PIDFD API
 M:	Christian Brauner <christian@brauner.io>
 L:	linux-kernel@vger.kernel.org

arch/arm/Kconfig

@@ -671,8 +671,6 @@ source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/mach-oxnas/Kconfig"
 
-source "arch/arm/mach-picoxcell/Kconfig"
-
 source "arch/arm/mach-prima2/Kconfig"
 
 source "arch/arm/mach-pxa/Kconfig"

arch/arm/Kconfig.debug

@@ -770,14 +770,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_OMAP2PLUS_UART
 
-	config DEBUG_PICOXCELL_UART
-		depends on ARCH_PICOXCELL
-		bool "Use PicoXcell UART for low-level debug"
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on PicoXcell based platforms.
-
 	config DEBUG_PXA_UART1
 		depends on ARCH_PXA
 		bool "Use PXA UART1 for low-level debug"
@@ -1717,7 +1709,6 @@ config DEBUG_UART_PHYS
 	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
-	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
 	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
@@ -1850,7 +1841,6 @@ config DEBUG_UART_VIRT
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
-	default 0xfe230000 if DEBUG_PICOXCELL_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
 	default 0xfe800000 if ARCH_IOP32X
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
@@ -1905,8 +1895,7 @@ config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || \
-		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
 		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
 		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
 		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \

arch/arm/Makefile

@@ -199,7 +199,6 @@ machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_RDA)		+= rda

arch/arm/mach-picoxcell/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-config ARCH_PICOXCELL
-	bool "Picochip PicoXcell"
-	depends on ARCH_MULTI_V6
-	select ARM_VIC
-	select DW_APB_TIMER_OF
-	select GPIOLIB
-	select HAVE_TCM
-	select NO_IOPORT_MAP

arch/arm/mach-picoxcell/Makefile

-# SPDX-License-Identifier: GPL-2.0-only
-obj-y	:= common.o

arch/arm/mach-picoxcell/common.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * All enquiries to support@picochip.com
- */
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/reboot.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#define PHYS_TO_IO(x)			(((x) & 0x00ffffff) | 0xfe000000)
-#define PICOXCELL_PERIPH_BASE		0x80000000
-#define PICOXCELL_PERIPH_LENGTH		SZ_4M
-
-#define WDT_CTRL_REG_EN_MASK		(1 << 0)
-#define WDT_CTRL_REG_OFFS		(0x00)
-#define WDT_TIMEOUT_REG_OFFS		(0x04)
-static void __iomem *wdt_regs;
-
-/*
- * The machine restart method can be called from an atomic context so we won't
- * be able to ioremap the regs then.
- */
-static void picoxcell_setup_restart(void)
-{
-	struct device_node *np = of_find_compatible_node(NULL, NULL,
-							 "snps,dw-apb-wdg");
-	if (WARN(!np, "unable to setup watchdog restart"))
-		return;
-
-	wdt_regs = of_iomap(np, 0);
-	WARN(!wdt_regs, "failed to remap watchdog regs");
-}
-
-static struct map_desc io_map __initdata = {
-	.virtual	= PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
-	.pfn		= __phys_to_pfn(PICOXCELL_PERIPH_BASE),
-	.length		= PICOXCELL_PERIPH_LENGTH,
-	.type		= MT_DEVICE,
-};
-
-static void __init picoxcell_map_io(void)
-{
-	iotable_init(&io_map, 1);
-}
-
-static void __init picoxcell_init_machine(void)
-{
-	picoxcell_setup_restart();
-}
-
-static const char *picoxcell_dt_match[] = {
-	"picochip,pc3x2",
-	"picochip,pc3x3",
-	NULL
-};
-
-static void picoxcell_wdt_restart(enum reboot_mode mode, const char *cmd)
-{
-	/*
-	 * Configure the watchdog to reset with the shortest possible timeout
-	 * and give it chance to do the reset.
-	 */
-	if (wdt_regs) {
-		writel_relaxed(WDT_CTRL_REG_EN_MASK, wdt_regs + WDT_CTRL_REG_OFFS);
-		writel_relaxed(0, wdt_regs + WDT_TIMEOUT_REG_OFFS);
-		/* No sleeping, possibly atomic. */
-		mdelay(500);
-	}
-}
-
-DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
-	.map_io		= picoxcell_map_io,
-	.init_machine	= picoxcell_init_machine,
-	.dt_compat	= picoxcell_dt_match,
-	.restart	= picoxcell_wdt_restart,
-MACHINE_END