Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (21 commits)
  MAINTAINERS: add an entry for Edac Sandy Bridge driver
  edac: tag sb_edac as EXPERIMENTAL, as it requires more testing
  EDAC: Fix incorrect edac mode reporting in sb_edac
  edac: sb_edac: Add it to the building system
  edac: Add an experimental new driver to support Sandy Bridge CPU's
  i7300_edac: Fix error cleanup logic
  i7core_edac: Initialize memory name with cpu, channel, bank
  i7core_edac: Fix compilation on 32 bits arch
  i7core_edac: scrubbing fixups
  EDAC: Correct Kconfig dependencies
  i7core_edac: return -ENODEV if no MC is found
  i7core_edac: use edac's own way to print errors
  MAINTAINERS: remove dropped edac_mce.* from the file
  i7core_edac: Drop the edac_mce facility
  x86, MCE: Use notifier chain only for MCE decoding
  EDAC i7core: Use mce socketid for better compatibility
  i7core_edac: Don't enable memory scrubbing for Xeon 35xx
  i7core_edac: Add scrubbing support
  edac: Move edac main structs to include/linux/edac.h
  i7core_edac: Fix oops when trying to inject errors
  ...

MAINTAINERS

@@ -2467,8 +2467,6 @@ L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i7core_edac.c
-F:	drivers/edac/edac_mce.c
-F:	include/linux/edac_mce.h
 
 EDAC-I82975X
 M:	Ranganathan Desikan <ravi@jetztechnologies.com>
@@ -2492,6 +2490,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
 
+EDAC-SBRIDGE
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/sb_edac.c
+
 EDIROL UA-101/UA-1000 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

arch/x86/kernel/cpu/mcheck/mce.c

@@ -36,7 +36,6 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/debugfs.h>
-#include <linux/edac_mce.h>
 #include <linux/irq_work.h>
 
 #include <asm/processor.h>
@@ -144,23 +143,20 @@ static struct mce_log mcelog = {
 void mce_log(struct mce *mce)
 {
 	unsigned next, entry;
+	int ret = 0;
 
 	/* Emit the trace record: */
 	trace_mce_record(mce);
 
+	ret = atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, mce);
+	if (ret == NOTIFY_STOP)
+		return;
+
 	mce->finished = 0;
 	wmb();
 	for (;;) {
 		entry = rcu_dereference_check_mce(mcelog.next);
 		for (;;) {
-			/*
-			 * If edac_mce is enabled, it will check the error type
-			 * and will process it, if it is a known error.
-			 * Otherwise, the error will be sent through mcelog
-			 * interface
-			 */
-			if (edac_mce_parse(mce))
-				return;
 
 			/*
 			 * When the buffer fills up discard new entries.
@@ -556,10 +552,8 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		 * Don't get the IP here because it's unlikely to
 		 * have anything to do with the actual error location.
 		 */
-		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
+		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce)
 			mce_log(&m);
-			atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
-		}
 
 		/*
 		 * Clear state for this bank.

drivers/edac/Kconfig

@@ -41,7 +41,7 @@ config EDAC_DEBUG
 
 config EDAC_DECODE_MCE
 	tristate "Decode MCEs in human-readable form (only on AMD for now)"
-	depends on CPU_SUP_AMD && X86_MCE
+	depends on CPU_SUP_AMD && X86_MCE_AMD
 	default y
 	---help---
 	  Enable this option if you want to decode Machine Check Exceptions
@@ -71,9 +71,6 @@ config EDAC_MM_EDAC
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
-config EDAC_MCE
-	bool
-
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h"
 	depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
@@ -173,8 +170,7 @@ config EDAC_I5400
 
 config EDAC_I7CORE
 	tristate "Intel i7 Core (Nehalem) processors"
-	depends on EDAC_MM_EDAC && PCI && X86
-	select EDAC_MCE
+	depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
 	help
 	  Support for error detection and correction the Intel
 	  i7 Core (Nehalem) Integrated Memory Controller that exists on
@@ -216,6 +212,14 @@ config EDAC_I7300
 	  Support for error detection and correction the Intel
 	  Clarksboro MCH (Intel 7300 chipset).
 
+config EDAC_SBRIDGE
+	tristate "Intel Sandy-Bridge Integrated MC"
+	depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL
+	depends on EXPERIMENTAL
+	help
+	  Support for error detection and correction the Intel
+	  Sandy Bridge Integrated Memory Controller.
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)

drivers/edac/Makefile

@@ -8,7 +8,6 @@
 
 obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
-obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
 edac_core-y	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
 edac_core-y	+= edac_module.o edac_device_sysfs.o
@@ -29,6 +28,7 @@ obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
 obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
 obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
+obj-$(CONFIG_EDAC_SBRIDGE)		+= sb_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o
 obj-$(CONFIG_EDAC_I82443BXGX)		+= i82443bxgx_edac.o

drivers/edac/edac_core.h

@@ -34,11 +34,10 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
+#include <linux/edac.h>
 
-#define EDAC_MC_LABEL_LEN	31
 #define EDAC_DEVICE_NAME_LEN	31
 #define EDAC_ATTRIB_VALUE_LEN	15
-#define MC_PROC_NAME_MAX_LEN	7
 
 #if PAGE_SHIFT < 20
 #define PAGES_TO_MiB(pages)	((pages) >> (20 - PAGE_SHIFT))
@@ -101,353 +100,6 @@ extern int edac_debug_level;
 
 #define edac_dev_name(dev) (dev)->dev_name
 
-/* memory devices */
-enum dev_type {
-	DEV_UNKNOWN = 0,
-	DEV_X1,
-	DEV_X2,
-	DEV_X4,
-	DEV_X8,
-	DEV_X16,
-	DEV_X32,		/* Do these parts exist? */
-	DEV_X64			/* Do these parts exist? */
-};
-
-#define DEV_FLAG_UNKNOWN	BIT(DEV_UNKNOWN)
-#define DEV_FLAG_X1		BIT(DEV_X1)
-#define DEV_FLAG_X2		BIT(DEV_X2)
-#define DEV_FLAG_X4		BIT(DEV_X4)
-#define DEV_FLAG_X8		BIT(DEV_X8)
-#define DEV_FLAG_X16		BIT(DEV_X16)
-#define DEV_FLAG_X32		BIT(DEV_X32)
-#define DEV_FLAG_X64		BIT(DEV_X64)
-
-/* memory types */
-enum mem_type {
-	MEM_EMPTY = 0,		/* Empty csrow */
-	MEM_RESERVED,		/* Reserved csrow type */
-	MEM_UNKNOWN,		/* Unknown csrow type */
-	MEM_FPM,		/* Fast page mode */
-	MEM_EDO,		/* Extended data out */
-	MEM_BEDO,		/* Burst Extended data out */
-	MEM_SDR,		/* Single data rate SDRAM */
-	MEM_RDR,		/* Registered single data rate SDRAM */
-	MEM_DDR,		/* Double data rate SDRAM */
-	MEM_RDDR,		/* Registered Double data rate SDRAM */
-	MEM_RMBS,		/* Rambus DRAM */
-	MEM_DDR2,		/* DDR2 RAM */
-	MEM_FB_DDR2,		/* fully buffered DDR2 */
-	MEM_RDDR2,		/* Registered DDR2 RAM */
-	MEM_XDR,		/* Rambus XDR */
-	MEM_DDR3,		/* DDR3 RAM */
-	MEM_RDDR3,		/* Registered DDR3 RAM */
-};
-
-#define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
-#define MEM_FLAG_RESERVED	BIT(MEM_RESERVED)
-#define MEM_FLAG_UNKNOWN	BIT(MEM_UNKNOWN)
-#define MEM_FLAG_FPM		BIT(MEM_FPM)
-#define MEM_FLAG_EDO		BIT(MEM_EDO)
-#define MEM_FLAG_BEDO		BIT(MEM_BEDO)
-#define MEM_FLAG_SDR		BIT(MEM_SDR)
-#define MEM_FLAG_RDR		BIT(MEM_RDR)
-#define MEM_FLAG_DDR		BIT(MEM_DDR)
-#define MEM_FLAG_RDDR		BIT(MEM_RDDR)
-#define MEM_FLAG_RMBS		BIT(MEM_RMBS)
-#define MEM_FLAG_DDR2           BIT(MEM_DDR2)
-#define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
-#define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
-#define MEM_FLAG_XDR            BIT(MEM_XDR)
-#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
-#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
-
-/* chipset Error Detection and Correction capabilities and mode */
-enum edac_type {
-	EDAC_UNKNOWN = 0,	/* Unknown if ECC is available */
-	EDAC_NONE,		/* Doesn't support ECC */
-	EDAC_RESERVED,		/* Reserved ECC type */
-	EDAC_PARITY,		/* Detects parity errors */
-	EDAC_EC,		/* Error Checking - no correction */
-	EDAC_SECDED,		/* Single bit error correction, Double detection */
-	EDAC_S2ECD2ED,		/* Chipkill x2 devices - do these exist? */
-	EDAC_S4ECD4ED,		/* Chipkill x4 devices */
-	EDAC_S8ECD8ED,		/* Chipkill x8 devices */
-	EDAC_S16ECD16ED,	/* Chipkill x16 devices */
-};
-
-#define EDAC_FLAG_UNKNOWN	BIT(EDAC_UNKNOWN)
-#define EDAC_FLAG_NONE		BIT(EDAC_NONE)
-#define EDAC_FLAG_PARITY	BIT(EDAC_PARITY)
-#define EDAC_FLAG_EC		BIT(EDAC_EC)
-#define EDAC_FLAG_SECDED	BIT(EDAC_SECDED)
-#define EDAC_FLAG_S2ECD2ED	BIT(EDAC_S2ECD2ED)
-#define EDAC_FLAG_S4ECD4ED	BIT(EDAC_S4ECD4ED)
-#define EDAC_FLAG_S8ECD8ED	BIT(EDAC_S8ECD8ED)
-#define EDAC_FLAG_S16ECD16ED	BIT(EDAC_S16ECD16ED)
-
-/* scrubbing capabilities */
-enum scrub_type {
-	SCRUB_UNKNOWN = 0,	/* Unknown if scrubber is available */
-	SCRUB_NONE,		/* No scrubber */
-	SCRUB_SW_PROG,		/* SW progressive (sequential) scrubbing */
-	SCRUB_SW_SRC,		/* Software scrub only errors */
-	SCRUB_SW_PROG_SRC,	/* Progressive software scrub from an error */
-	SCRUB_SW_TUNABLE,	/* Software scrub frequency is tunable */
-	SCRUB_HW_PROG,		/* HW progressive (sequential) scrubbing */
-	SCRUB_HW_SRC,		/* Hardware scrub only errors */
-	SCRUB_HW_PROG_SRC,	/* Progressive hardware scrub from an error */
-	SCRUB_HW_TUNABLE	/* Hardware scrub frequency is tunable */
-};
-
-#define SCRUB_FLAG_SW_PROG	BIT(SCRUB_SW_PROG)
-#define SCRUB_FLAG_SW_SRC	BIT(SCRUB_SW_SRC)
-#define SCRUB_FLAG_SW_PROG_SRC	BIT(SCRUB_SW_PROG_SRC)
-#define SCRUB_FLAG_SW_TUN	BIT(SCRUB_SW_SCRUB_TUNABLE)
-#define SCRUB_FLAG_HW_PROG	BIT(SCRUB_HW_PROG)
-#define SCRUB_FLAG_HW_SRC	BIT(SCRUB_HW_SRC)
-#define SCRUB_FLAG_HW_PROG_SRC	BIT(SCRUB_HW_PROG_SRC)
-#define SCRUB_FLAG_HW_TUN	BIT(SCRUB_HW_TUNABLE)
-
-/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
-
-/* EDAC internal operation states */
-#define	OP_ALLOC		0x100
-#define OP_RUNNING_POLL		0x201
-#define OP_RUNNING_INTERRUPT	0x202
-#define OP_RUNNING_POLL_INTR	0x203
-#define OP_OFFLINE		0x300
-
-/*
- * There are several things to be aware of that aren't at all obvious:
- *
- *
- * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
- *
- * These are some of the many terms that are thrown about that don't always
- * mean what people think they mean (Inconceivable!).  In the interest of
- * creating a common ground for discussion, terms and their definitions
- * will be established.
- *
- * Memory devices:	The individual chip on a memory stick.  These devices
- *			commonly output 4 and 8 bits each.  Grouping several
- *			of these in parallel provides 64 bits which is common
- *			for a memory stick.
- *
- * Memory Stick:	A printed circuit board that aggregates multiple
- *			memory devices in parallel.  This is the atomic
- *			memory component that is purchaseable by Joe consumer
- *			and loaded into a memory socket.
- *
- * Socket:		A physical connector on the motherboard that accepts
- *			a single memory stick.
- *
- * Channel:		Set of memory devices on a memory stick that must be
- *			grouped in parallel with one or more additional
- *			channels from other memory sticks.  This parallel
- *			grouping of the output from multiple channels are
- *			necessary for the smallest granularity of memory access.
- *			Some memory controllers are capable of single channel -
- *			which means that memory sticks can be loaded
- *			individually.  Other memory controllers are only
- *			capable of dual channel - which means that memory
- *			sticks must be loaded as pairs (see "socket set").
- *
- * Chip-select row:	All of the memory devices that are selected together.
- *			for a single, minimum grain of memory access.
- *			This selects all of the parallel memory devices across
- *			all of the parallel channels.  Common chip-select rows
- *			for single channel are 64 bits, for dual channel 128
- *			bits.
- *
- * Single-Ranked stick:	A Single-ranked stick has 1 chip-select row of memory.
- *			Motherboards commonly drive two chip-select pins to
- *			a memory stick. A single-ranked stick, will occupy
- *			only one of those rows. The other will be unused.
- *
- * Double-Ranked stick:	A double-ranked stick has two chip-select rows which
- *			access different sets of memory devices.  The two
- *			rows cannot be accessed concurrently.
- *
- * Double-sided stick:	DEPRECATED TERM, see Double-Ranked stick.
- *			A double-sided stick has two chip-select rows which
- *			access different sets of memory devices.  The two
- *			rows cannot be accessed concurrently.  "Double-sided"
- *			is irrespective of the memory devices being mounted
- *			on both sides of the memory stick.
- *
- * Socket set:		All of the memory sticks that are required for
- *			a single memory access or all of the memory sticks
- *			spanned by a chip-select row.  A single socket set
- *			has two chip-select rows and if double-sided sticks
- *			are used these will occupy those chip-select rows.
- *
- * Bank:		This term is avoided because it is unclear when
- *			needing to distinguish between chip-select rows and
- *			socket sets.
- *
- * Controller pages:
- *
- * Physical pages:
- *
- * Virtual pages:
- *
- *
- * STRUCTURE ORGANIZATION AND CHOICES
- *
- *
- *
- * PS - I enjoyed writing all that about as much as you enjoyed reading it.
- */
-
-struct channel_info {
-	int chan_idx;		/* channel index */
-	u32 ce_count;		/* Correctable Errors for this CHANNEL */
-	char label[EDAC_MC_LABEL_LEN + 1];	/* DIMM label on motherboard */
-	struct csrow_info *csrow;	/* the parent */
-};
-
-struct csrow_info {
-	unsigned long first_page;	/* first page number in dimm */
-	unsigned long last_page;	/* last page number in dimm */
-	unsigned long page_mask;	/* used for interleaving -
-					 * 0UL for non intlv
-					 */
-	u32 nr_pages;		/* number of pages in csrow */
-	u32 grain;		/* granularity of reported error in bytes */
-	int csrow_idx;		/* the chip-select row */
-	enum dev_type dtype;	/* memory device type */
-	u32 ue_count;		/* Uncorrectable Errors for this csrow */
-	u32 ce_count;		/* Correctable Errors for this csrow */
-	enum mem_type mtype;	/* memory csrow type */
-	enum edac_type edac_mode;	/* EDAC mode for this csrow */
-	struct mem_ctl_info *mci;	/* the parent */
-
-	struct kobject kobj;	/* sysfs kobject for this csrow */
-
-	/* channel information for this csrow */
-	u32 nr_channels;
-	struct channel_info *channels;
-};
-
-struct mcidev_sysfs_group {
-	const char *name;				/* group name */
-	const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
-};
-
-struct mcidev_sysfs_group_kobj {
-	struct list_head list;		/* list for all instances within a mc */
-
-	struct kobject kobj;		/* kobj for the group */
-
-	const struct mcidev_sysfs_group *grp;	/* group description table */
-	struct mem_ctl_info *mci;	/* the parent */
-};
-
-/* mcidev_sysfs_attribute structure
- *	used for driver sysfs attributes and in mem_ctl_info
- * 	sysfs top level entries
- */
-struct mcidev_sysfs_attribute {
-	/* It should use either attr or grp */
-	struct attribute attr;
-	const struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
-
-	/* Ops for show/store values at the attribute - not used on group */
-        ssize_t (*show)(struct mem_ctl_info *,char *);
-        ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
-};
-
-/* MEMORY controller information structure
- */
-struct mem_ctl_info {
-	struct list_head link;	/* for global list of mem_ctl_info structs */
-
-	struct module *owner;	/* Module owner of this control struct */
-
-	unsigned long mtype_cap;	/* memory types supported by mc */
-	unsigned long edac_ctl_cap;	/* Mem controller EDAC capabilities */
-	unsigned long edac_cap;	/* configuration capabilities - this is
-				 * closely related to edac_ctl_cap.  The
-				 * difference is that the controller may be
-				 * capable of s4ecd4ed which would be listed
-				 * in edac_ctl_cap, but if channels aren't
-				 * capable of s4ecd4ed then the edac_cap would
-				 * not have that capability.
-				 */
-	unsigned long scrub_cap;	/* chipset scrub capabilities */
-	enum scrub_type scrub_mode;	/* current scrub mode */
-
-	/* Translates sdram memory scrub rate given in bytes/sec to the
-	   internal representation and configures whatever else needs
-	   to be configured.
-	 */
-	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
-
-	/* Get the current sdram memory scrub rate from the internal
-	   representation and converts it to the closest matching
-	   bandwidth in bytes/sec.
-	 */
-	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
-
-
-	/* pointer to edac checking routine */
-	void (*edac_check) (struct mem_ctl_info * mci);
-
-	/*
-	 * Remaps memory pages: controller pages to physical pages.
-	 * For most MC's, this will be NULL.
-	 */
-	/* FIXME - why not send the phys page to begin with? */
-	unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
-					   unsigned long page);
-	int mc_idx;
-	int nr_csrows;
-	struct csrow_info *csrows;
-	/*
-	 * FIXME - what about controllers on other busses? - IDs must be
-	 * unique.  dev pointer should be sufficiently unique, but
-	 * BUS:SLOT.FUNC numbers may not be unique.
-	 */
-	struct device *dev;
-	const char *mod_name;
-	const char *mod_ver;
-	const char *ctl_name;
-	const char *dev_name;
-	char proc_name[MC_PROC_NAME_MAX_LEN + 1];
-	void *pvt_info;
-	u32 ue_noinfo_count;	/* Uncorrectable Errors w/o info */
-	u32 ce_noinfo_count;	/* Correctable Errors w/o info */
-	u32 ue_count;		/* Total Uncorrectable Errors for this MC */
-	u32 ce_count;		/* Total Correctable Errors for this MC */
-	unsigned long start_time;	/* mci load start time (in jiffies) */
-
-	struct completion complete;
-
-	/* edac sysfs device control */
-	struct kobject edac_mci_kobj;
-
-	/* list for all grp instances within a mc */
-	struct list_head grp_kobj_list;
-
-	/* Additional top controller level attributes, but specified
-	 * by the low level driver.
-	 *
-	 * Set by the low level driver to provide attributes at the
-	 * controller level, same level as 'ue_count' and 'ce_count' above.
-	 * An array of structures, NULL terminated
-	 *
-	 * If attributes are desired, then set to array of attributes
-	 * If no attributes are desired, leave NULL
-	 */
-	const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
-
-	/* work struct for this MC */
-	struct delayed_work work;
-
-	/* the internal state of this controller instance */
-	int op_state;
-};
-
 /*
  * The following are the structures to provide for a generic
  * or abstract 'edac_device'. This set of structures and the

drivers/edac/edac_mce.c

-/* Provides edac interface to mcelog events
- *
- * This file may be distributed under the terms of the
- * GNU General Public License version 2.
- *
- * Copyright (c) 2009 by:
- *	 Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Red Hat Inc. http://www.redhat.com
- */
-
-#include <linux/module.h>
-#include <linux/edac_mce.h>
-#include <asm/mce.h>
-
-int edac_mce_enabled;
-EXPORT_SYMBOL_GPL(edac_mce_enabled);
-
-
-/*
- * Extension interface
- */
-
-static LIST_HEAD(edac_mce_list);
-static DEFINE_MUTEX(edac_mce_lock);
-
-int edac_mce_register(struct edac_mce *edac_mce)
-{
-	mutex_lock(&edac_mce_lock);
-	list_add_tail(&edac_mce->list, &edac_mce_list);
-	mutex_unlock(&edac_mce_lock);
-	return 0;
-}
-EXPORT_SYMBOL(edac_mce_register);
-
-void edac_mce_unregister(struct edac_mce *edac_mce)
-{
-	mutex_lock(&edac_mce_lock);
-	list_del(&edac_mce->list);
-	mutex_unlock(&edac_mce_lock);
-}
-EXPORT_SYMBOL(edac_mce_unregister);
-
-int edac_mce_parse(struct mce *mce)
-{
-	struct edac_mce *edac_mce;
-
-	list_for_each_entry(edac_mce, &edac_mce_list, list) {
-		if (edac_mce->check_error(edac_mce->priv, mce))
-			return 1;
-	}
-
-	/* Nobody queued the error */
-	return 0;
-}
-EXPORT_SYMBOL_GPL(edac_mce_parse);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
-MODULE_DESCRIPTION("EDAC Driver for mcelog captured errors");

drivers/edac/i7300_edac.c

@@ -372,7 +372,7 @@ static const char *get_err_from_table(const char *table[], int size, int pos)
 static void i7300_process_error_global(struct mem_ctl_info *mci)
 {
 	struct i7300_pvt *pvt;
-	u32 errnum, value;
+	u32 errnum, error_reg;
 	unsigned long errors;
 	const char *specific;
 	bool is_fatal;
@@ -381,9 +381,9 @@ static void i7300_process_error_global(struct mem_ctl_info *mci)
 
 	/* read in the 1st FATAL error register */
 	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
-			      FERR_GLOBAL_HI, &value);
-	if (unlikely(value)) {
-		errors = value;
+			      FERR_GLOBAL_HI, &error_reg);
+	if (unlikely(error_reg)) {
+		errors = error_reg;
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_global_hi_name));
 		specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum);
@@ -391,15 +391,15 @@ static void i7300_process_error_global(struct mem_ctl_info *mci)
 
 		/* Clear the error bit */
 		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
-				       FERR_GLOBAL_HI, value);
+				       FERR_GLOBAL_HI, error_reg);
 
 		goto error_global;
 	}
 
 	pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
-			      FERR_GLOBAL_LO, &value);
-	if (unlikely(value)) {
-		errors = value;
+			      FERR_GLOBAL_LO, &error_reg);
+	if (unlikely(error_reg)) {
+		errors = error_reg;
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_global_lo_name));
 		specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum);
@@ -407,7 +407,7 @@ static void i7300_process_error_global(struct mem_ctl_info *mci)
 
 		/* Clear the error bit */
 		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
-				       FERR_GLOBAL_LO, value);
+				       FERR_GLOBAL_LO, error_reg);
 
 		goto error_global;
 	}
@@ -427,7 +427,7 @@ static void i7300_process_error_global(struct mem_ctl_info *mci)
 static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 {
 	struct i7300_pvt *pvt;
-	u32 errnum, value;
+	u32 errnum, value, error_reg;
 	u16 val16;
 	unsigned branch, channel, bank, rank, cas, ras;
 	u32 syndrome;
@@ -440,14 +440,14 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 
 	/* read in the 1st FATAL error register */
 	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
-			      FERR_FAT_FBD, &value);
-	if (unlikely(value & FERR_FAT_FBD_ERR_MASK)) {
-		errors = value & FERR_FAT_FBD_ERR_MASK ;
+			      FERR_FAT_FBD, &error_reg);
+	if (unlikely(error_reg & FERR_FAT_FBD_ERR_MASK)) {
+		errors = error_reg & FERR_FAT_FBD_ERR_MASK ;
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_fat_fbd_name));
 		specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum);
+		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
 
-		branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
 		pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
 				     NRECMEMA, &val16);
 		bank = NRECMEMA_BANK(val16);
@@ -455,11 +455,14 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 				NRECMEMB, &value);
-
 		is_wr = NRECMEMB_IS_WR(value);
 		cas = NRECMEMB_CAS(value);
 		ras = NRECMEMB_RAS(value);
 
+		/* Clean the error register */
+		pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				FERR_FAT_FBD, error_reg);
+
 		snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
 			"FATAL (Branch=%d DRAM-Bank=%d %s "
 			"RAS=%d CAS=%d Err=0x%lx (%s))",
@@ -476,21 +479,17 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 
 	/* read in the 1st NON-FATAL error register */
 	pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
-			      FERR_NF_FBD, &value);
-	if (unlikely(value & FERR_NF_FBD_ERR_MASK)) {
-		errors = value & FERR_NF_FBD_ERR_MASK;
+			      FERR_NF_FBD, &error_reg);
+	if (unlikely(error_reg & FERR_NF_FBD_ERR_MASK)) {
+		errors = error_reg & FERR_NF_FBD_ERR_MASK;
 		errnum = find_first_bit(&errors,
 					ARRAY_SIZE(ferr_nf_fbd_name));
 		specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum);
-
-		/* Clear the error bit */
-		pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs,
-				       FERR_GLOBAL_LO, value);
+		branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0;
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 			REDMEMA, &syndrome);
 
-		branch = (GET_FBD_FAT_IDX(value) == 2) ? 1 : 0;
 		pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map,
 				     RECMEMA, &val16);
 		bank = RECMEMA_BANK(val16);
@@ -498,18 +497,20 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci)
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 				RECMEMB, &value);
-
 		is_wr = RECMEMB_IS_WR(value);
 		cas = RECMEMB_CAS(value);
 		ras = RECMEMB_RAS(value);
 
 		pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
 				     REDMEMB, &value);
-
 		channel = (branch << 1);
 		if (IS_SECOND_CH(value))
 			channel++;
 
+		/* Clear the error bit */
+		pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map,
+				FERR_NF_FBD, error_reg);
+
 		/* Form out message */
 		snprintf(pvt->tmp_prt_buffer, PAGE_SIZE,
 			"Corrected error (Branch=%d, Channel %d), "

drivers/edac/i7core_edac.c

@@ -31,11 +31,13 @@
 #include <linux/pci_ids.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/edac.h>
 #include <linux/mmzone.h>
-#include <linux/edac_mce.h>
 #include <linux/smp.h>
+#include <asm/mce.h>
 #include <asm/processor.h>
+#include <asm/div64.h>
 
 #include "edac_core.h"
 
@@ -78,6 +80,8 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
 	/* OFFSETS for Device 0 Function 0 */
 
 #define MC_CFG_CONTROL	0x90
+  #define MC_CFG_UNLOCK		0x02
+  #define MC_CFG_LOCK		0x00
 
 	/* OFFSETS for Device 3 Function 0 */
 
@@ -98,6 +102,15 @@ MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices");
   #define DIMM0_COR_ERR(r)			((r) & 0x7fff)
 
 /* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
+#define MC_SSRCONTROL		0x48
+  #define SSR_MODE_DISABLE	0x00
+  #define SSR_MODE_ENABLE	0x01
+  #define SSR_MODE_MASK		0x03
+
+#define MC_SCRUB_CONTROL	0x4c
+  #define STARTSCRUB		(1 << 24)
+  #define SCRUBINTERVAL_MASK    0xffffff
+
 #define MC_COR_ECC_CNT_0	0x80
 #define MC_COR_ECC_CNT_1	0x84
 #define MC_COR_ECC_CNT_2	0x88
@@ -253,10 +266,7 @@ struct i7core_pvt {
 	unsigned long	rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
 	int		rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
 
-	unsigned int	is_registered;
-
-	/* mcelog glue */
-	struct edac_mce		edac_mce;
+	bool		is_registered, enable_scrub;
 
 	/* Fifo double buffers */
 	struct mce		mce_entry[MCE_LOG_LEN];
@@ -268,6 +278,9 @@ struct i7core_pvt {
 	/* Count indicator to show errors not got */
 	unsigned		mce_overrun;
 
+	/* DCLK Frequency used for computing scrub rate */
+	int			dclk_freq;
+
 	/* Struct to control EDAC polling */
 	struct edac_pci_ctl_info *i7core_pci;
 };
@@ -281,7 +294,6 @@ static const struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
 		/* Memory controller */
 	{ PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR)     },
 	{ PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD)  },
-
 			/* Exists only for RDIMM */
 	{ PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1  },
 	{ PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
@@ -303,6 +315,16 @@ static const struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
 	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
 	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
 	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC)   },
+
+		/* Generic Non-core registers */
+	/*
+	 * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
+	 * On Xeon 55xx, however, it has a different id (8086:2c40). So,
+	 * the probing code needs to test for the other address in case of
+	 * failure of this one
+	 */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE)  },
+
 };
 
 static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
@@ -319,6 +341,12 @@ static const struct pci_id_descr pci_dev_descr_lynnfield[] = {
 	{ PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
 	{ PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
 	{ PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC)   },
+
+	/*
+	 * This is the PCI device has an alternate address on some
+	 * processors like Core i7 860
+	 */
+	{ PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE)     },
 };
 
 static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
@@ -346,6 +374,10 @@ static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
 	{ PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
 	{ PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
 	{ PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2)   },
+
+		/* Generic Non-core registers */
+	{ PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2)  },
+
 };
 
 #define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
@@ -714,6 +746,10 @@ static int get_dimm_config(const struct mem_ctl_info *mci)
 
 			csr->edac_mode = mode;
 			csr->mtype = mtype;
+			snprintf(csr->channels[0].label,
+					sizeof(csr->channels[0].label),
+					"CPU#%uChannel#%u_DIMM#%u",
+					pvt->i7core_dev->socket, i, j);
 
 			csrow++;
 		}
@@ -731,7 +767,7 @@ static int get_dimm_config(const struct mem_ctl_info *mci)
 			debugf1("\t\t%#x\t%#x\t%#x\n",
 				(value[j] >> 27) & 0x1,
 				(value[j] >> 24) & 0x7,
-				(value[j] && ((1 << 24) - 1)));
+				(value[j] & ((1 << 24) - 1)));
 	}
 
 	return 0;
@@ -1324,6 +1360,20 @@ static int i7core_get_onedevice(struct pci_dev **prev,
 	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			      dev_descr->dev_id, *prev);
 
+	/*
+	 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
+	 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
+	 * to probe for the alternate address in case of failure
+	 */
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
+
+	if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
+				      *prev);
+
 	if (!pdev) {
 		if (*prev) {
 			*prev = pdev;
@@ -1444,8 +1494,10 @@ static int mci_bind_devs(struct mem_ctl_info *mci,
 	struct i7core_pvt *pvt = mci->pvt_info;
 	struct pci_dev *pdev;
 	int i, func, slot;
+	char *family;
 
-	pvt->is_registered = 0;
+	pvt->is_registered = false;
+	pvt->enable_scrub  = false;
 	for (i = 0; i < i7core_dev->n_devs; i++) {
 		pdev = i7core_dev->pdev[i];
 		if (!pdev)
@@ -1461,9 +1513,37 @@ static int mci_bind_devs(struct mem_ctl_info *mci,
 			if (unlikely(func > MAX_CHAN_FUNC))
 				goto error;
 			pvt->pci_ch[slot - 4][func] = pdev;
-		} else if (!slot && !func)
+		} else if (!slot && !func) {
 			pvt->pci_noncore = pdev;
-		else
+
+			/* Detect the processor family */
+			switch (pdev->device) {
+			case PCI_DEVICE_ID_INTEL_I7_NONCORE:
+				family = "Xeon 35xx/ i7core";
+				pvt->enable_scrub = false;
+				break;
+			case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT:
+				family = "i7-800/i5-700";
+				pvt->enable_scrub = false;
+				break;
+			case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE:
+				family = "Xeon 34xx";
+				pvt->enable_scrub = false;
+				break;
+			case PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT:
+				family = "Xeon 55xx";
+				pvt->enable_scrub = true;
+				break;
+			case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2:
+				family = "Xeon 56xx / i7-900";
+				pvt->enable_scrub = true;
+				break;
+			default:
+				family = "unknown";
+				pvt->enable_scrub = false;
+			}
+			debugf0("Detected a processor type %s\n", family);
+		} else
 			goto error;
 
 		debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
@@ -1472,7 +1552,7 @@ static int mci_bind_devs(struct mem_ctl_info *mci,
 
 		if (PCI_SLOT(pdev->devfn) == 3 &&
 			PCI_FUNC(pdev->devfn) == 2)
-			pvt->is_registered = 1;
+			pvt->is_registered = true;
 	}
 
 	return 0;
@@ -1826,33 +1906,43 @@ static void i7core_check_error(struct mem_ctl_info *mci)
  * WARNING: As this routine should be called at NMI time, extra care should
  * be taken to avoid deadlocks, and to be as fast as possible.
  */
-static int i7core_mce_check_error(void *priv, struct mce *mce)
+static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val,
+				  void *data)
 {
-	struct mem_ctl_info *mci = priv;
-	struct i7core_pvt *pvt = mci->pvt_info;
+	struct mce *mce = (struct mce *)data;
+	struct i7core_dev *i7_dev;
+	struct mem_ctl_info *mci;
+	struct i7core_pvt *pvt;
+
+	i7_dev = get_i7core_dev(mce->socketid);
+	if (!i7_dev)
+		return NOTIFY_BAD;
+
+	mci = i7_dev->mci;
+	pvt = mci->pvt_info;
 
 	/*
 	 * Just let mcelog handle it if the error is
 	 * outside the memory controller
 	 */
 	if (((mce->status & 0xffff) >> 7) != 1)
-		return 0;
+		return NOTIFY_DONE;
 
 	/* Bank 8 registers are the only ones that we know how to handle */
 	if (mce->bank != 8)
-		return 0;
+		return NOTIFY_DONE;
 
 #ifdef CONFIG_SMP
 	/* Only handle if it is the right mc controller */
-	if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
-		return 0;
+	if (mce->socketid != pvt->i7core_dev->socket)
+		return NOTIFY_DONE;
 #endif
 
 	smp_rmb();
 	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
 		smp_wmb();
 		pvt->mce_overrun++;
-		return 0;
+		return NOTIFY_DONE;
 	}
 
 	/* Copy memory error at the ringbuffer */
@@ -1865,7 +1955,240 @@ static int i7core_mce_check_error(void *priv, struct mce *mce)
 		i7core_check_error(mci);
 
 	/* Advise mcelog that the errors were handled */
-	return 1;
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block i7_mce_dec = {
+	.notifier_call	= i7core_mce_check_error,
+};
+
+struct memdev_dmi_entry {
+	u8 type;
+	u8 length;
+	u16 handle;
+	u16 phys_mem_array_handle;
+	u16 mem_err_info_handle;
+	u16 total_width;
+	u16 data_width;
+	u16 size;
+	u8 form;
+	u8 device_set;
+	u8 device_locator;
+	u8 bank_locator;
+	u8 memory_type;
+	u16 type_detail;
+	u16 speed;
+	u8 manufacturer;
+	u8 serial_number;
+	u8 asset_tag;
+	u8 part_number;
+	u8 attributes;
+	u32 extended_size;
+	u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+
+/*
+ * Decode the DRAM Clock Frequency, be paranoid, make sure that all
+ * memory devices show the same speed, and if they don't then consider
+ * all speeds to be invalid.
+ */
+static void decode_dclk(const struct dmi_header *dh, void *_dclk_freq)
+{
+	int *dclk_freq = _dclk_freq;
+	u16 dmi_mem_clk_speed;
+
+	if (*dclk_freq == -1)
+		return;
+
+	if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+		struct memdev_dmi_entry *memdev_dmi_entry =
+			(struct memdev_dmi_entry *)dh;
+		unsigned long conf_mem_clk_speed_offset =
+			(unsigned long)&memdev_dmi_entry->conf_mem_clk_speed -
+			(unsigned long)&memdev_dmi_entry->type;
+		unsigned long speed_offset =
+			(unsigned long)&memdev_dmi_entry->speed -
+			(unsigned long)&memdev_dmi_entry->type;
+
+		/* Check that a DIMM is present */
+		if (memdev_dmi_entry->size == 0)
+			return;
+
+		/*
+		 * Pick the configured speed if it's available, otherwise
+		 * pick the DIMM speed, or we don't have a speed.
+		 */
+		if (memdev_dmi_entry->length > conf_mem_clk_speed_offset) {
+			dmi_mem_clk_speed =
+				memdev_dmi_entry->conf_mem_clk_speed;
+		} else if (memdev_dmi_entry->length > speed_offset) {
+			dmi_mem_clk_speed = memdev_dmi_entry->speed;
+		} else {
+			*dclk_freq = -1;
+			return;
+		}
+
+		if (*dclk_freq == 0) {
+			/* First pass, speed was 0 */
+			if (dmi_mem_clk_speed > 0) {
+				/* Set speed if a valid speed is read */
+				*dclk_freq = dmi_mem_clk_speed;
+			} else {
+				/* Otherwise we don't have a valid speed */
+				*dclk_freq = -1;
+			}
+		} else if (*dclk_freq > 0 &&
+			   *dclk_freq != dmi_mem_clk_speed) {
+			/*
+			 * If we have a speed, check that all DIMMS are the same
+			 * speed, otherwise set the speed as invalid.
+			 */
+			*dclk_freq = -1;
+		}
+	}
+}
+
+/*
+ * The default DCLK frequency is used as a fallback if we
+ * fail to find anything reliable in the DMI. The value
+ * is taken straight from the datasheet.
+ */
+#define DEFAULT_DCLK_FREQ 800
+
+static int get_dclk_freq(void)
+{
+	int dclk_freq = 0;
+
+	dmi_walk(decode_dclk, (void *)&dclk_freq);
+
+	if (dclk_freq < 1)
+		return DEFAULT_DCLK_FREQ;
+
+	return dclk_freq;
+}
+
+/*
+ * set_sdram_scrub_rate		This routine sets byte/sec bandwidth scrub rate
+ *				to hardware according to SCRUBINTERVAL formula
+ *				found in datasheet.
+ */
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	u32 dw_scrub;
+	u32 dw_ssr;
+
+	/* Get data from the MC register, function 2 */
+	pdev = pvt->pci_mcr[2];
+	if (!pdev)
+		return -ENODEV;
+
+	pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub);
+
+	if (new_bw == 0) {
+		/* Prepare to disable petrol scrub */
+		dw_scrub &= ~STARTSCRUB;
+		/* Stop the patrol scrub engine */
+		write_and_test(pdev, MC_SCRUB_CONTROL,
+			       dw_scrub & ~SCRUBINTERVAL_MASK);
+
+		/* Get current status of scrub rate and set bit to disable */
+		pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+		dw_ssr &= ~SSR_MODE_MASK;
+		dw_ssr |= SSR_MODE_DISABLE;
+	} else {
+		const int cache_line_size = 64;
+		const u32 freq_dclk_mhz = pvt->dclk_freq;
+		unsigned long long scrub_interval;
+		/*
+		 * Translate the desired scrub rate to a register value and
+		 * program the corresponding register value.
+		 */
+		scrub_interval = (unsigned long long)freq_dclk_mhz *
+			cache_line_size * 1000000;
+		do_div(scrub_interval, new_bw);
+
+		if (!scrub_interval || scrub_interval > SCRUBINTERVAL_MASK)
+			return -EINVAL;
+
+		dw_scrub = SCRUBINTERVAL_MASK & scrub_interval;
+
+		/* Start the patrol scrub engine */
+		pci_write_config_dword(pdev, MC_SCRUB_CONTROL,
+				       STARTSCRUB | dw_scrub);
+
+		/* Get current status of scrub rate and set bit to enable */
+		pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr);
+		dw_ssr &= ~SSR_MODE_MASK;
+		dw_ssr |= SSR_MODE_ENABLE;
+	}
+	/* Disable or enable scrubbing */
+	pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr);
+
+	return new_bw;
+}
+
+/*
+ * get_sdram_scrub_rate		This routine convert current scrub rate value
+ *				into byte/sec bandwidth accourding to
+ *				SCRUBINTERVAL formula found in datasheet.
+ */
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	const u32 cache_line_size = 64;
+	const u32 freq_dclk_mhz = pvt->dclk_freq;
+	unsigned long long scrub_rate;
+	u32 scrubval;
+
+	/* Get data from the MC register, function 2 */
+	pdev = pvt->pci_mcr[2];
+	if (!pdev)
+		return -ENODEV;
+
+	/* Get current scrub control data */
+	pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval);
+
+	/* Mask highest 8-bits to 0 */
+	scrubval &=  SCRUBINTERVAL_MASK;
+	if (!scrubval)
+		return 0;
+
+	/* Calculate scrub rate value into byte/sec bandwidth */
+	scrub_rate =  (unsigned long long)freq_dclk_mhz *
+		1000000 * cache_line_size;
+	do_div(scrub_rate, scrubval);
+	return (int)scrub_rate;
+}
+
+static void enable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 pci_lock;
+
+	/* Unlock writes to pci registers */
+	pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+	pci_lock &= ~0x3;
+	pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+			       pci_lock | MC_CFG_UNLOCK);
+
+	mci->set_sdram_scrub_rate = set_sdram_scrub_rate;
+	mci->get_sdram_scrub_rate = get_sdram_scrub_rate;
+}
+
+static void disable_sdram_scrub_setting(struct mem_ctl_info *mci)
+{
+	struct i7core_pvt *pvt = mci->pvt_info;
+	u32 pci_lock;
+
+	/* Lock writes to pci registers */
+	pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock);
+	pci_lock &= ~0x3;
+	pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL,
+			       pci_lock | MC_CFG_LOCK);
 }
 
 static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
@@ -1874,7 +2197,8 @@ static void i7core_pci_ctl_create(struct i7core_pvt *pvt)
 						&pvt->i7core_dev->pdev[0]->dev,
 						EDAC_MOD_STR);
 	if (unlikely(!pvt->i7core_pci))
-		pr_warn("Unable to setup PCI error report via EDAC\n");
+		i7core_printk(KERN_WARNING,
+			      "Unable to setup PCI error report via EDAC\n");
 }
 
 static void i7core_pci_ctl_release(struct i7core_pvt *pvt)
@@ -1906,8 +2230,11 @@ static void i7core_unregister_mci(struct i7core_dev *i7core_dev)
 	debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
 		__func__, mci, &i7core_dev->pdev[0]->dev);
 
-	/* Disable MCE NMI handler */
-	edac_mce_unregister(&pvt->edac_mce);
+	/* Disable scrubrate setting */
+	if (pvt->enable_scrub)
+		disable_sdram_scrub_setting(mci);
+
+	atomic_notifier_chain_unregister(&x86_mce_decoder_chain, &i7_mce_dec);
 
 	/* Disable EDAC polling */
 	i7core_pci_ctl_release(pvt);
@@ -1979,6 +2306,10 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev)
 	/* Set the function pointer to an actual operation function */
 	mci->edac_check = i7core_check_error;
 
+	/* Enable scrubrate setting */
+	if (pvt->enable_scrub)
+		enable_sdram_scrub_setting(mci);
+
 	/* add this new MC control structure to EDAC's list of MCs */
 	if (unlikely(edac_mc_add_mc(mci))) {
 		debugf0("MC: " __FILE__
@@ -2002,21 +2333,13 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev)
 	/* allocating generic PCI control info */
 	i7core_pci_ctl_create(pvt);
 
-	/* Registers on edac_mce in order to receive memory errors */
-	pvt->edac_mce.priv = mci;
-	pvt->edac_mce.check_error = i7core_mce_check_error;
-	rc = edac_mce_register(&pvt->edac_mce);
-	if (unlikely(rc < 0)) {
-		debugf0("MC: " __FILE__
-			": %s(): failed edac_mce_register()\n", __func__);
-		goto fail1;
-	}
+	/* DCLK for scrub rate setting */
+	pvt->dclk_freq = get_dclk_freq();
+
+	atomic_notifier_chain_register(&x86_mce_decoder_chain, &i7_mce_dec);
 
 	return 0;
 
-fail1:
-	i7core_pci_ctl_release(pvt);
-	edac_mc_del_mc(mci->dev);
 fail0:
 	kfree(mci->ctl_name);
 	edac_mc_free(mci);
@@ -2035,7 +2358,7 @@ static int i7core_register_mci(struct i7core_dev *i7core_dev)
 static int __devinit i7core_probe(struct pci_dev *pdev,
 				  const struct pci_device_id *id)
 {
-	int rc;
+	int rc, count = 0;
 	struct i7core_dev *i7core_dev;
 
 	/* get the pci devices we want to reserve for our use */
@@ -2055,12 +2378,28 @@ static int __devinit i7core_probe(struct pci_dev *pdev,
 		goto fail0;
 
 	list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
+		count++;
 		rc = i7core_register_mci(i7core_dev);
 		if (unlikely(rc < 0))
 			goto fail1;
 	}
 
-	i7core_printk(KERN_INFO, "Driver loaded.\n");
+	/*
+	 * Nehalem-EX uses a different memory controller. However, as the
+	 * memory controller is not visible on some Nehalem/Nehalem-EP, we
+	 * need to indirectly probe via a X58 PCI device. The same devices
+	 * are found on (some) Nehalem-EX. So, on those machines, the
+	 * probe routine needs to return -ENODEV, as the actual Memory
+	 * Controller registers won't be detected.
+	 */
+	if (!count) {
+		rc = -ENODEV;
+		goto fail1;
+	}
+
+	i7core_printk(KERN_INFO,
+		      "Driver loaded, %d memory controller(s) found.\n",
+		      count);
 
 	mutex_unlock(&i7core_edac_lock);
 	return 0;

drivers/edac/sb_edac.c

+/* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module
+ *
+ * This driver supports the memory controllers found on the Intel
+ * processor family Sandy Bridge.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2011 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_core.h"
+
+/* Static vars */
+static LIST_HEAD(sbridge_edac_list);
+static DEFINE_MUTEX(sbridge_edac_lock);
+static int probed;
+
+/*
+ * Alter this version for the module when modifications are made
+ */
+#define SBRIDGE_REVISION    " Ver: 1.0.0 "
+#define EDAC_MOD_STR      "sbridge_edac"
+
+/*
+ * Debug macros
+ */
+#define sbridge_printk(level, fmt, arg...)			\
+	edac_printk(level, "sbridge", fmt, ##arg)
+
+#define sbridge_mc_printk(mci, level, fmt, arg...)		\
+	edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg)
+
+/*
+ * Get a bit field at register value <v>, from bit <lo> to bit <hi>
+ */
+#define GET_BITFIELD(v, lo, hi)	\
+	(((v) & ((1ULL << ((hi) - (lo) + 1)) - 1) << (lo)) >> (lo))
+
+/*
+ * sbridge Memory Controller Registers
+ */
+
+/*
+ * FIXME: For now, let's order by device function, as it makes
+ * easier for driver's development proccess. This table should be
+ * moved to pci_id.h when submitted upstream
+ */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0	0x3cf4	/* 12.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1	0x3cf6	/* 12.7 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_BR		0x3cf5	/* 13.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0	0x3ca0	/* 14.0 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA	0x3ca8	/* 15.0 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS	0x3c71	/* 15.1 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0	0x3caa	/* 15.2 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1	0x3cab	/* 15.3 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2	0x3cac	/* 15.4 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3	0x3cad	/* 15.5 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO	0x3cb8	/* 17.0 */
+
+	/*
+	 * Currently, unused, but will be needed in the future
+	 * implementations, as they hold the error counters
+	 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR0	0x3c72	/* 16.2 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR1	0x3c73	/* 16.3 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR2	0x3c76	/* 16.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_ERR3	0x3c77	/* 16.7 */
+
+/* Devices 12 Function 6, Offsets 0x80 to 0xcc */
+static const u32 dram_rule[] = {
+	0x80, 0x88, 0x90, 0x98, 0xa0,
+	0xa8, 0xb0, 0xb8, 0xc0, 0xc8,
+};
+#define MAX_SAD		ARRAY_SIZE(dram_rule)
+
+#define SAD_LIMIT(reg)		((GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff)
+#define DRAM_ATTR(reg)		GET_BITFIELD(reg, 2,  3)
+#define INTERLEAVE_MODE(reg)	GET_BITFIELD(reg, 1,  1)
+#define DRAM_RULE_ENABLE(reg)	GET_BITFIELD(reg, 0,  0)
+
+static char *get_dram_attr(u32 reg)
+{
+	switch(DRAM_ATTR(reg)) {
+		case 0:
+			return "DRAM";
+		case 1:
+			return "MMCFG";
+		case 2:
+			return "NXM";
+		default:
+			return "unknown";
+	}
+}
+
+static const u32 interleave_list[] = {
+	0x84, 0x8c, 0x94, 0x9c, 0xa4,
+	0xac, 0xb4, 0xbc, 0xc4, 0xcc,
+};
+#define MAX_INTERLEAVE	ARRAY_SIZE(interleave_list)
+
+#define SAD_PKG0(reg)		GET_BITFIELD(reg, 0, 2)
+#define SAD_PKG1(reg)		GET_BITFIELD(reg, 3, 5)
+#define SAD_PKG2(reg)		GET_BITFIELD(reg, 8, 10)
+#define SAD_PKG3(reg)		GET_BITFIELD(reg, 11, 13)
+#define SAD_PKG4(reg)		GET_BITFIELD(reg, 16, 18)
+#define SAD_PKG5(reg)		GET_BITFIELD(reg, 19, 21)
+#define SAD_PKG6(reg)		GET_BITFIELD(reg, 24, 26)
+#define SAD_PKG7(reg)		GET_BITFIELD(reg, 27, 29)
+
+static inline int sad_pkg(u32 reg, int interleave)
+{
+	switch (interleave) {
+	case 0:
+		return SAD_PKG0(reg);
+	case 1:
+		return SAD_PKG1(reg);
+	case 2:
+		return SAD_PKG2(reg);
+	case 3:
+		return SAD_PKG3(reg);
+	case 4:
+		return SAD_PKG4(reg);
+	case 5:
+		return SAD_PKG5(reg);
+	case 6:
+		return SAD_PKG6(reg);
+	case 7:
+		return SAD_PKG7(reg);
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Devices 12 Function 7 */
+
+#define TOLM		0x80
+#define	TOHM		0x84
+
+#define GET_TOLM(reg)		((GET_BITFIELD(reg, 0,  3) << 28) | 0x3ffffff)
+#define GET_TOHM(reg)		((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff)
+
+/* Device 13 Function 6 */
+
+#define SAD_TARGET	0xf0
+
+#define SOURCE_ID(reg)		GET_BITFIELD(reg, 9, 11)
+
+#define SAD_CONTROL	0xf4
+
+#define NODE_ID(reg)		GET_BITFIELD(reg, 0, 2)
+
+/* Device 14 function 0 */
+
+static const u32 tad_dram_rule[] = {
+	0x40, 0x44, 0x48, 0x4c,
+	0x50, 0x54, 0x58, 0x5c,
+	0x60, 0x64, 0x68, 0x6c,
+};
+#define MAX_TAD	ARRAY_SIZE(tad_dram_rule)
+
+#define TAD_LIMIT(reg)		((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff)
+#define TAD_SOCK(reg)		GET_BITFIELD(reg, 10, 11)
+#define TAD_CH(reg)		GET_BITFIELD(reg,  8,  9)
+#define TAD_TGT3(reg)		GET_BITFIELD(reg,  6,  7)
+#define TAD_TGT2(reg)		GET_BITFIELD(reg,  4,  5)
+#define TAD_TGT1(reg)		GET_BITFIELD(reg,  2,  3)
+#define TAD_TGT0(reg)		GET_BITFIELD(reg,  0,  1)
+
+/* Device 15, function 0 */
+
+#define MCMTR			0x7c
+
+#define IS_ECC_ENABLED(mcmtr)		GET_BITFIELD(mcmtr, 2, 2)
+#define IS_LOCKSTEP_ENABLED(mcmtr)	GET_BITFIELD(mcmtr, 1, 1)
+#define IS_CLOSE_PG(mcmtr)		GET_BITFIELD(mcmtr, 0, 0)
+
+/* Device 15, function 1 */
+
+#define RASENABLES		0xac
+#define IS_MIRROR_ENABLED(reg)		GET_BITFIELD(reg, 0, 0)
+
+/* Device 15, functions 2-5 */
+
+static const int mtr_regs[] = {
+	0x80, 0x84, 0x88,
+};
+
+#define RANK_DISABLE(mtr)		GET_BITFIELD(mtr, 16, 19)
+#define IS_DIMM_PRESENT(mtr)		GET_BITFIELD(mtr, 14, 14)
+#define RANK_CNT_BITS(mtr)		GET_BITFIELD(mtr, 12, 13)
+#define RANK_WIDTH_BITS(mtr)		GET_BITFIELD(mtr, 2, 4)
+#define COL_WIDTH_BITS(mtr)		GET_BITFIELD(mtr, 0, 1)
+
+static const u32 tad_ch_nilv_offset[] = {
+	0x90, 0x94, 0x98, 0x9c,
+	0xa0, 0xa4, 0xa8, 0xac,
+	0xb0, 0xb4, 0xb8, 0xbc,
+};
+#define CHN_IDX_OFFSET(reg)		GET_BITFIELD(reg, 28, 29)
+#define TAD_OFFSET(reg)			(GET_BITFIELD(reg,  6, 25) << 26)
+
+static const u32 rir_way_limit[] = {
+	0x108, 0x10c, 0x110, 0x114, 0x118,
+};
+#define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit)
+
+#define IS_RIR_VALID(reg)	GET_BITFIELD(reg, 31, 31)
+#define RIR_WAY(reg)		GET_BITFIELD(reg, 28, 29)
+#define RIR_LIMIT(reg)		((GET_BITFIELD(reg,  1, 10) << 29)| 0x1fffffff)
+
+#define MAX_RIR_WAY	8
+
+static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = {
+	{ 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c },
+	{ 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c },
+	{ 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c },
+	{ 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c },
+	{ 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
+};
+
+#define RIR_RNK_TGT(reg)		GET_BITFIELD(reg, 16, 19)
+#define RIR_OFFSET(reg)		GET_BITFIELD(reg,  2, 14)
+
+/* Device 16, functions 2-7 */
+
+/*
+ * FIXME: Implement the error count reads directly
+ */
+
+static const u32 correrrcnt[] = {
+	0x104, 0x108, 0x10c, 0x110,
+};
+
+#define RANK_ODD_OV(reg)		GET_BITFIELD(reg, 31, 31)
+#define RANK_ODD_ERR_CNT(reg)		GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_OV(reg)		GET_BITFIELD(reg, 15, 15)
+#define RANK_EVEN_ERR_CNT(reg)		GET_BITFIELD(reg,  0, 14)
+
+static const u32 correrrthrsld[] = {
+	0x11c, 0x120, 0x124, 0x128,
+};
+
+#define RANK_ODD_ERR_THRSLD(reg)	GET_BITFIELD(reg, 16, 30)
+#define RANK_EVEN_ERR_THRSLD(reg)	GET_BITFIELD(reg,  0, 14)
+
+
+/* Device 17, function 0 */
+
+#define RANK_CFG_A		0x0328
+
+#define IS_RDIMM_ENABLED(reg)		GET_BITFIELD(reg, 11, 11)
+
+/*
+ * sbridge structs
+ */
+
+#define NUM_CHANNELS	4
+#define MAX_DIMMS	3		/* Max DIMMS per channel */
+
+struct sbridge_info {
+	u32	mcmtr;
+};
+
+struct sbridge_channel {
+	u32		ranks;
+	u32		dimms;
+};
+
+struct pci_id_descr {
+	int			dev;
+	int			func;
+	int 			dev_id;
+	int			optional;
+};
+
+struct pci_id_table {
+	const struct pci_id_descr	*descr;
+	int				n_devs;
+};
+
+struct sbridge_dev {
+	struct list_head	list;
+	u8			bus, mc;
+	u8			node_id, source_id;
+	struct pci_dev		**pdev;
+	int			n_devs;
+	struct mem_ctl_info	*mci;
+};
+
+struct sbridge_pvt {
+	struct pci_dev		*pci_ta, *pci_ddrio, *pci_ras;
+	struct pci_dev		*pci_sad0, *pci_sad1, *pci_ha0;
+	struct pci_dev		*pci_br;
+	struct pci_dev		*pci_tad[NUM_CHANNELS];
+
+	struct sbridge_dev	*sbridge_dev;
+
+	struct sbridge_info	info;
+	struct sbridge_channel	channel[NUM_CHANNELS];
+
+	int 			csrow_map[NUM_CHANNELS][MAX_DIMMS];
+
+	/* Memory type detection */
+	bool			is_mirrored, is_lockstep, is_close_pg;
+
+	/* Fifo double buffers */
+	struct mce		mce_entry[MCE_LOG_LEN];
+	struct mce		mce_outentry[MCE_LOG_LEN];
+
+	/* Fifo in/out counters */
+	unsigned		mce_in, mce_out;
+
+	/* Count indicator to show errors not got */
+	unsigned		mce_overrun;
+
+	/* Memory description */
+	u64			tolm, tohm;
+};
+
+#define PCI_DESCR(device, function, device_id)	\
+	.dev = (device),			\
+	.func = (function),			\
+	.dev_id = (device_id)
+
+static const struct pci_id_descr pci_dev_descr_sbridge[] = {
+		/* Processor Home Agent */
+	{ PCI_DESCR(14, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0)		},
+
+		/* Memory controller */
+	{ PCI_DESCR(15, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA)		},
+	{ PCI_DESCR(15, 1, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS)		},
+	{ PCI_DESCR(15, 2, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0)	},
+	{ PCI_DESCR(15, 3, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1)	},
+	{ PCI_DESCR(15, 4, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2)	},
+	{ PCI_DESCR(15, 5, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3)	},
+	{ PCI_DESCR(17, 0, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO)	},
+
+		/* System Address Decoder */
+	{ PCI_DESCR(12, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0)		},
+	{ PCI_DESCR(12, 7, PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1)		},
+
+		/* Broadcast Registers */
+	{ PCI_DESCR(13, 6, PCI_DEVICE_ID_INTEL_SBRIDGE_BR)		},
+};
+
+#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
+static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
+	PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge),
+	{0,}			/* 0 terminated list. */
+};
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ */
+static const struct pci_device_id sbridge_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA)},
+	{0,}			/* 0 terminated list. */
+};
+
+
+/****************************************************************************
+			Anciliary status routines
+ ****************************************************************************/
+
+static inline int numrank(u32 mtr)
+{
+	int ranks = (1 << RANK_CNT_BITS(mtr));
+
+	if (ranks > 4) {
+		debugf0("Invalid number of ranks: %d (max = 4) raw value = %x (%04x)",
+			ranks, (unsigned int)RANK_CNT_BITS(mtr), mtr);
+		return -EINVAL;
+	}
+
+	return ranks;
+}
+
+static inline int numrow(u32 mtr)
+{
+	int rows = (RANK_WIDTH_BITS(mtr) + 12);
+
+	if (rows < 13 || rows > 18) {
+		debugf0("Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)",
+			rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr);
+		return -EINVAL;
+	}
+
+	return 1 << rows;
+}
+
+static inline int numcol(u32 mtr)
+{
+	int cols = (COL_WIDTH_BITS(mtr) + 10);
+
+	if (cols > 12) {
+		debugf0("Invalid number of cols: %d (max = 4) raw value = %x (%04x)",
+			cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr);
+		return -EINVAL;
+	}
+
+	return 1 << cols;
+}
+
+static struct sbridge_dev *get_sbridge_dev(u8 bus)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+		if (sbridge_dev->bus == bus)
+			return sbridge_dev;
+	}
+
+	return NULL;
+}
+
+static struct sbridge_dev *alloc_sbridge_dev(u8 bus,
+					   const struct pci_id_table *table)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL);
+	if (!sbridge_dev)
+		return NULL;
+
+	sbridge_dev->pdev = kzalloc(sizeof(*sbridge_dev->pdev) * table->n_devs,
+				   GFP_KERNEL);
+	if (!sbridge_dev->pdev) {
+		kfree(sbridge_dev);
+		return NULL;
+	}
+
+	sbridge_dev->bus = bus;
+	sbridge_dev->n_devs = table->n_devs;
+	list_add_tail(&sbridge_dev->list, &sbridge_edac_list);
+
+	return sbridge_dev;
+}
+
+static void free_sbridge_dev(struct sbridge_dev *sbridge_dev)
+{
+	list_del(&sbridge_dev->list);
+	kfree(sbridge_dev->pdev);
+	kfree(sbridge_dev);
+}
+
+/****************************************************************************
+			Memory check routines
+ ****************************************************************************/
+static struct pci_dev *get_pdev_slot_func(u8 bus, unsigned slot,
+					  unsigned func)
+{
+	struct sbridge_dev *sbridge_dev = get_sbridge_dev(bus);
+	int i;
+
+	if (!sbridge_dev)
+		return NULL;
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		if (!sbridge_dev->pdev[i])
+			continue;
+
+		if (PCI_SLOT(sbridge_dev->pdev[i]->devfn) == slot &&
+		    PCI_FUNC(sbridge_dev->pdev[i]->devfn) == func) {
+			debugf1("Associated %02x.%02x.%d with %p\n",
+				bus, slot, func, sbridge_dev->pdev[i]);
+			return sbridge_dev->pdev[i];
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * sbridge_get_active_channels() - gets the number of channels and csrows
+ * bus:		Device bus
+ * @channels:	Number of channels that will be returned
+ * @csrows:	Number of csrows found
+ *
+ * Since EDAC core needs to know in advance the number of available channels
+ * and csrows, in order to allocate memory for csrows/channels, it is needed
+ * to run two similar steps. At the first step, implemented on this function,
+ * it checks the number of csrows/channels present at one socket, identified
+ * by the associated PCI bus.
+ * this is used in order to properly allocate the size of mci components.
+ * Note: one csrow is one dimm.
+ */
+static int sbridge_get_active_channels(const u8 bus, unsigned *channels,
+				      unsigned *csrows)
+{
+	struct pci_dev *pdev = NULL;
+	int i, j;
+	u32 mcmtr;
+
+	*channels = 0;
+	*csrows = 0;
+
+	pdev = get_pdev_slot_func(bus, 15, 0);
+	if (!pdev) {
+		sbridge_printk(KERN_ERR, "Couldn't find PCI device "
+					"%2x.%02d.%d!!!\n",
+					bus, 15, 0);
+		return -ENODEV;
+	}
+
+	pci_read_config_dword(pdev, MCMTR, &mcmtr);
+	if (!IS_ECC_ENABLED(mcmtr)) {
+		sbridge_printk(KERN_ERR, "ECC is disabled. Aborting\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		u32 mtr;
+
+		/* Device 15 functions 2 - 5  */
+		pdev = get_pdev_slot_func(bus, 15, 2 + i);
+		if (!pdev) {
+			sbridge_printk(KERN_ERR, "Couldn't find PCI device "
+						 "%2x.%02d.%d!!!\n",
+						 bus, 15, 2 + i);
+			return -ENODEV;
+		}
+		(*channels)++;
+
+		for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+			pci_read_config_dword(pdev, mtr_regs[j], &mtr);
+			debugf1("Bus#%02x channel #%d  MTR%d = %x\n", bus, i, j, mtr);
+			if (IS_DIMM_PRESENT(mtr))
+				(*csrows)++;
+		}
+	}
+
+	debugf0("Number of active channels: %d, number of active dimms: %d\n",
+		*channels, *csrows);
+
+	return 0;
+}
+
+static int get_dimm_config(const struct mem_ctl_info *mci)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct csrow_info *csr;
+	int i, j, banks, ranks, rows, cols, size, npages;
+	int csrow = 0;
+	unsigned long last_page = 0;
+	u32 reg;
+	enum edac_type mode;
+	enum mem_type mtype;
+
+	pci_read_config_dword(pvt->pci_br, SAD_TARGET, &reg);
+	pvt->sbridge_dev->source_id = SOURCE_ID(reg);
+
+	pci_read_config_dword(pvt->pci_br, SAD_CONTROL, &reg);
+	pvt->sbridge_dev->node_id = NODE_ID(reg);
+	debugf0("mc#%d: Node ID: %d, source ID: %d\n",
+		pvt->sbridge_dev->mc,
+		pvt->sbridge_dev->node_id,
+		pvt->sbridge_dev->source_id);
+
+	pci_read_config_dword(pvt->pci_ras, RASENABLES, &reg);
+	if (IS_MIRROR_ENABLED(reg)) {
+		debugf0("Memory mirror is enabled\n");
+		pvt->is_mirrored = true;
+	} else {
+		debugf0("Memory mirror is disabled\n");
+		pvt->is_mirrored = false;
+	}
+
+	pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr);
+	if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) {
+		debugf0("Lockstep is enabled\n");
+		mode = EDAC_S8ECD8ED;
+		pvt->is_lockstep = true;
+	} else {
+		debugf0("Lockstep is disabled\n");
+		mode = EDAC_S4ECD4ED;
+		pvt->is_lockstep = false;
+	}
+	if (IS_CLOSE_PG(pvt->info.mcmtr)) {
+		debugf0("address map is on closed page mode\n");
+		pvt->is_close_pg = true;
+	} else {
+		debugf0("address map is on open page mode\n");
+		pvt->is_close_pg = false;
+	}
+
+	pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, &reg);
+	if (IS_RDIMM_ENABLED(reg)) {
+		/* FIXME: Can also be LRDIMM */
+		debugf0("Memory is registered\n");
+		mtype = MEM_RDDR3;
+	} else {
+		debugf0("Memory is unregistered\n");
+		mtype = MEM_DDR3;
+	}
+
+	/* On all supported DDR3 DIMM types, there are 8 banks available */
+	banks = 8;
+
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		u32 mtr;
+
+		for (j = 0; j < ARRAY_SIZE(mtr_regs); j++) {
+			pci_read_config_dword(pvt->pci_tad[i],
+					      mtr_regs[j], &mtr);
+			debugf4("Channel #%d  MTR%d = %x\n", i, j, mtr);
+			if (IS_DIMM_PRESENT(mtr)) {
+				pvt->channel[i].dimms++;
+
+				ranks = numrank(mtr);
+				rows = numrow(mtr);
+				cols = numcol(mtr);
+
+				/* DDR3 has 8 I/O banks */
+				size = (rows * cols * banks * ranks) >> (20 - 3);
+				npages = MiB_TO_PAGES(size);
+
+				debugf0("mc#%d: channel %d, dimm %d, %d Mb (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n",
+					pvt->sbridge_dev->mc, i, j,
+					size, npages,
+					banks, ranks, rows, cols);
+				csr = &mci->csrows[csrow];
+
+				csr->first_page = last_page;
+				csr->last_page = last_page + npages - 1;
+				csr->page_mask = 0UL;	/* Unused */
+				csr->nr_pages = npages;
+				csr->grain = 32;
+				csr->csrow_idx = csrow;
+				csr->dtype = (banks == 8) ? DEV_X8 : DEV_X4;
+				csr->ce_count = 0;
+				csr->ue_count = 0;
+				csr->mtype = mtype;
+				csr->edac_mode = mode;
+				csr->nr_channels = 1;
+				csr->channels[0].chan_idx = i;
+				csr->channels[0].ce_count = 0;
+				pvt->csrow_map[i][j] = csrow;
+				snprintf(csr->channels[0].label,
+					 sizeof(csr->channels[0].label),
+					 "CPU_SrcID#%u_Channel#%u_DIMM#%u",
+					 pvt->sbridge_dev->source_id, i, j);
+				last_page += npages;
+				csrow++;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void get_memory_layout(const struct mem_ctl_info *mci)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	int i, j, k, n_sads, n_tads, sad_interl;
+	u32 reg;
+	u64 limit, prv = 0;
+	u64 tmp_mb;
+	u32 rir_way;
+
+	/*
+	 * Step 1) Get TOLM/TOHM ranges
+	 */
+
+	/* Address range is 32:28 */
+	pci_read_config_dword(pvt->pci_sad1, TOLM,
+			      &reg);
+	pvt->tolm = GET_TOLM(reg);
+	tmp_mb = (1 + pvt->tolm) >> 20;
+
+	debugf0("TOLM: %Lu.%03Lu GB (0x%016Lx)\n",
+		tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tolm);
+
+	/* Address range is already 45:25 */
+	pci_read_config_dword(pvt->pci_sad1, TOHM,
+			      &reg);
+	pvt->tohm = GET_TOHM(reg);
+	tmp_mb = (1 + pvt->tohm) >> 20;
+
+	debugf0("TOHM: %Lu.%03Lu GB (0x%016Lx)",
+		tmp_mb / 1000, tmp_mb % 1000, (u64)pvt->tohm);
+
+	/*
+	 * Step 2) Get SAD range and SAD Interleave list
+	 * TAD registers contain the interleave wayness. However, it
+	 * seems simpler to just discover it indirectly, with the
+	 * algorithm bellow.
+	 */
+	prv = 0;
+	for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
+		/* SAD_LIMIT Address range is 45:26 */
+		pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
+				      &reg);
+		limit = SAD_LIMIT(reg);
+
+		if (!DRAM_RULE_ENABLE(reg))
+			continue;
+
+		if (limit <= prv)
+			break;
+
+		tmp_mb = (limit + 1) >> 20;
+		debugf0("SAD#%d %s up to %Lu.%03Lu GB (0x%016Lx) %s reg=0x%08x\n",
+			n_sads,
+			get_dram_attr(reg),
+			tmp_mb / 1000, tmp_mb % 1000,
+			((u64)tmp_mb) << 20L,
+			INTERLEAVE_MODE(reg) ? "Interleave: 8:6" : "Interleave: [8:6]XOR[18:16]",
+			reg);
+		prv = limit;
+
+		pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
+				      &reg);
+		sad_interl = sad_pkg(reg, 0);
+		for (j = 0; j < 8; j++) {
+			if (j > 0 && sad_interl == sad_pkg(reg, j))
+				break;
+
+			debugf0("SAD#%d, interleave #%d: %d\n",
+			n_sads, j, sad_pkg(reg, j));
+		}
+	}
+
+	/*
+	 * Step 3) Get TAD range
+	 */
+	prv = 0;
+	for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+		pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
+				      &reg);
+		limit = TAD_LIMIT(reg);
+		if (limit <= prv)
+			break;
+		tmp_mb = (limit + 1) >> 20;
+
+		debugf0("TAD#%d: up to %Lu.%03Lu GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n",
+			n_tads, tmp_mb / 1000, tmp_mb % 1000,
+			((u64)tmp_mb) << 20L,
+			(u32)TAD_SOCK(reg),
+			(u32)TAD_CH(reg),
+			(u32)TAD_TGT0(reg),
+			(u32)TAD_TGT1(reg),
+			(u32)TAD_TGT2(reg),
+			(u32)TAD_TGT3(reg),
+			reg);
+		prv = tmp_mb;
+	}
+
+	/*
+	 * Step 4) Get TAD offsets, per each channel
+	 */
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (!pvt->channel[i].dimms)
+			continue;
+		for (j = 0; j < n_tads; j++) {
+			pci_read_config_dword(pvt->pci_tad[i],
+					      tad_ch_nilv_offset[j],
+					      &reg);
+			tmp_mb = TAD_OFFSET(reg) >> 20;
+			debugf0("TAD CH#%d, offset #%d: %Lu.%03Lu GB (0x%016Lx), reg=0x%08x\n",
+				i, j,
+				tmp_mb / 1000, tmp_mb % 1000,
+				((u64)tmp_mb) << 20L,
+				reg);
+		}
+	}
+
+	/*
+	 * Step 6) Get RIR Wayness/Limit, per each channel
+	 */
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (!pvt->channel[i].dimms)
+			continue;
+		for (j = 0; j < MAX_RIR_RANGES; j++) {
+			pci_read_config_dword(pvt->pci_tad[i],
+					      rir_way_limit[j],
+					      &reg);
+
+			if (!IS_RIR_VALID(reg))
+				continue;
+
+			tmp_mb = RIR_LIMIT(reg) >> 20;
+			rir_way = 1 << RIR_WAY(reg);
+			debugf0("CH#%d RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d, reg=0x%08x\n",
+				i, j,
+				tmp_mb / 1000, tmp_mb % 1000,
+				((u64)tmp_mb) << 20L,
+				rir_way,
+				reg);
+
+			for (k = 0; k < rir_way; k++) {
+				pci_read_config_dword(pvt->pci_tad[i],
+						      rir_offset[j][k],
+						      &reg);
+				tmp_mb = RIR_OFFSET(reg) << 6;
+
+				debugf0("CH#%d RIR#%d INTL#%d, offset %Lu.%03Lu GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
+					i, j, k,
+					tmp_mb / 1000, tmp_mb % 1000,
+					((u64)tmp_mb) << 20L,
+					(u32)RIR_RNK_TGT(reg),
+					reg);
+			}
+		}
+	}
+}
+
+struct mem_ctl_info *get_mci_for_node_id(u8 node_id)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+		if (sbridge_dev->node_id == node_id)
+			return sbridge_dev->mci;
+	}
+	return NULL;
+}
+
+static int get_memory_error_data(struct mem_ctl_info *mci,
+				 u64 addr,
+				 u8 *socket,
+				 long *channel_mask,
+				 u8 *rank,
+				 char *area_type)
+{
+	struct mem_ctl_info	*new_mci;
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	char			msg[256];
+	int 			n_rir, n_sads, n_tads, sad_way, sck_xch;
+	int			sad_interl, idx, base_ch;
+	int			interleave_mode;
+	unsigned		sad_interleave[MAX_INTERLEAVE];
+	u32			reg;
+	u8			ch_way,sck_way;
+	u32			tad_offset;
+	u32			rir_way;
+	u64			ch_addr, offset, limit, prv = 0;
+
+
+	/*
+	 * Step 0) Check if the address is at special memory ranges
+	 * The check bellow is probably enough to fill all cases where
+	 * the error is not inside a memory, except for the legacy
+	 * range (e. g. VGA addresses). It is unlikely, however, that the
+	 * memory controller would generate an error on that range.
+	 */
+	if ((addr > (u64) pvt->tolm) && (addr < (1L << 32))) {
+		sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr);
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	if (addr >= (u64)pvt->tohm) {
+		sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr);
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+
+	/*
+	 * Step 1) Get socket
+	 */
+	for (n_sads = 0; n_sads < MAX_SAD; n_sads++) {
+		pci_read_config_dword(pvt->pci_sad0, dram_rule[n_sads],
+				      &reg);
+
+		if (!DRAM_RULE_ENABLE(reg))
+			continue;
+
+		limit = SAD_LIMIT(reg);
+		if (limit <= prv) {
+			sprintf(msg, "Can't discover the memory socket");
+			edac_mc_handle_ce_no_info(mci, msg);
+			return -EINVAL;
+		}
+		if  (addr <= limit)
+			break;
+		prv = limit;
+	}
+	if (n_sads == MAX_SAD) {
+		sprintf(msg, "Can't discover the memory socket");
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	area_type = get_dram_attr(reg);
+	interleave_mode = INTERLEAVE_MODE(reg);
+
+	pci_read_config_dword(pvt->pci_sad0, interleave_list[n_sads],
+			      &reg);
+	sad_interl = sad_pkg(reg, 0);
+	for (sad_way = 0; sad_way < 8; sad_way++) {
+		if (sad_way > 0 && sad_interl == sad_pkg(reg, sad_way))
+			break;
+		sad_interleave[sad_way] = sad_pkg(reg, sad_way);
+		debugf0("SAD interleave #%d: %d\n",
+			sad_way, sad_interleave[sad_way]);
+	}
+	debugf0("mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n",
+		pvt->sbridge_dev->mc,
+		n_sads,
+		addr,
+		limit,
+		sad_way + 7,
+		INTERLEAVE_MODE(reg) ? "" : "XOR[18:16]");
+	if (interleave_mode)
+		idx = ((addr >> 6) ^ (addr >> 16)) & 7;
+	else
+		idx = (addr >> 6) & 7;
+	switch (sad_way) {
+	case 1:
+		idx = 0;
+		break;
+	case 2:
+		idx = idx & 1;
+		break;
+	case 4:
+		idx = idx & 3;
+		break;
+	case 8:
+		break;
+	default:
+		sprintf(msg, "Can't discover socket interleave");
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	*socket = sad_interleave[idx];
+	debugf0("SAD interleave index: %d (wayness %d) = CPU socket %d\n",
+		idx, sad_way, *socket);
+
+	/*
+	 * Move to the proper node structure, in order to access the
+	 * right PCI registers
+	 */
+	new_mci = get_mci_for_node_id(*socket);
+	if (!new_mci) {
+		sprintf(msg, "Struct for socket #%u wasn't initialized",
+			*socket);
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	mci = new_mci;
+	pvt = mci->pvt_info;
+
+	/*
+	 * Step 2) Get memory channel
+	 */
+	prv = 0;
+	for (n_tads = 0; n_tads < MAX_TAD; n_tads++) {
+		pci_read_config_dword(pvt->pci_ha0, tad_dram_rule[n_tads],
+				      &reg);
+		limit = TAD_LIMIT(reg);
+		if (limit <= prv) {
+			sprintf(msg, "Can't discover the memory channel");
+			edac_mc_handle_ce_no_info(mci, msg);
+			return -EINVAL;
+		}
+		if  (addr <= limit)
+			break;
+		prv = limit;
+	}
+	ch_way = TAD_CH(reg) + 1;
+	sck_way = TAD_SOCK(reg) + 1;
+	/*
+	 * FIXME: Is it right to always use channel 0 for offsets?
+	 */
+	pci_read_config_dword(pvt->pci_tad[0],
+				tad_ch_nilv_offset[n_tads],
+				&tad_offset);
+
+	if (ch_way == 3)
+		idx = addr >> 6;
+	else
+		idx = addr >> (6 + sck_way);
+	idx = idx % ch_way;
+
+	/*
+	 * FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ???
+	 */
+	switch (idx) {
+	case 0:
+		base_ch = TAD_TGT0(reg);
+		break;
+	case 1:
+		base_ch = TAD_TGT1(reg);
+		break;
+	case 2:
+		base_ch = TAD_TGT2(reg);
+		break;
+	case 3:
+		base_ch = TAD_TGT3(reg);
+		break;
+	default:
+		sprintf(msg, "Can't discover the TAD target");
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	*channel_mask = 1 << base_ch;
+
+	if (pvt->is_mirrored) {
+		*channel_mask |= 1 << ((base_ch + 2) % 4);
+		switch(ch_way) {
+		case 2:
+		case 4:
+			sck_xch = 1 << sck_way * (ch_way >> 1);
+			break;
+		default:
+			sprintf(msg, "Invalid mirror set. Can't decode addr");
+			edac_mc_handle_ce_no_info(mci, msg);
+			return -EINVAL;
+		}
+	} else
+		sck_xch = (1 << sck_way) * ch_way;
+
+	if (pvt->is_lockstep)
+		*channel_mask |= 1 << ((base_ch + 1) % 4);
+
+	offset = TAD_OFFSET(tad_offset);
+
+	debugf0("TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n",
+		n_tads,
+		addr,
+		limit,
+		(u32)TAD_SOCK(reg),
+		ch_way,
+		offset,
+		idx,
+		base_ch,
+		*channel_mask);
+
+	/* Calculate channel address */
+	/* Remove the TAD offset */
+
+	if (offset > addr) {
+		sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!",
+			offset, addr);
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	addr -= offset;
+	/* Store the low bits [0:6] of the addr */
+	ch_addr = addr & 0x7f;
+	/* Remove socket wayness and remove 6 bits */
+	addr >>= 6;
+	addr /= sck_xch;
+#if 0
+	/* Divide by channel way */
+	addr = addr / ch_way;
+#endif
+	/* Recover the last 6 bits */
+	ch_addr |= addr << 6;
+
+	/*
+	 * Step 3) Decode rank
+	 */
+	for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) {
+		pci_read_config_dword(pvt->pci_tad[base_ch],
+				      rir_way_limit[n_rir],
+				      &reg);
+
+		if (!IS_RIR_VALID(reg))
+			continue;
+
+		limit = RIR_LIMIT(reg);
+
+		debugf0("RIR#%d, limit: %Lu.%03Lu GB (0x%016Lx), way: %d\n",
+			n_rir,
+			(limit >> 20) / 1000, (limit >> 20) % 1000,
+			limit,
+			1 << RIR_WAY(reg));
+		if  (ch_addr <= limit)
+			break;
+	}
+	if (n_rir == MAX_RIR_RANGES) {
+		sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx",
+			ch_addr);
+		edac_mc_handle_ce_no_info(mci, msg);
+		return -EINVAL;
+	}
+	rir_way = RIR_WAY(reg);
+	if (pvt->is_close_pg)
+		idx = (ch_addr >> 6);
+	else
+		idx = (ch_addr >> 13);	/* FIXME: Datasheet says to shift by 15 */
+	idx %= 1 << rir_way;
+
+	pci_read_config_dword(pvt->pci_tad[base_ch],
+			      rir_offset[n_rir][idx],
+			      &reg);
+	*rank = RIR_RNK_TGT(reg);
+
+	debugf0("RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
+		n_rir,
+		ch_addr,
+		limit,
+		rir_way,
+		idx);
+
+	return 0;
+}
+
+/****************************************************************************
+	Device initialization routines: put/get, init/exit
+ ****************************************************************************/
+
+/*
+ *	sbridge_put_all_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void sbridge_put_devices(struct sbridge_dev *sbridge_dev)
+{
+	int i;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		struct pci_dev *pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+		debugf0("Removing dev %02x:%02x.%d\n",
+			pdev->bus->number,
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+		pci_dev_put(pdev);
+	}
+}
+
+static void sbridge_put_all_devices(void)
+{
+	struct sbridge_dev *sbridge_dev, *tmp;
+
+	list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) {
+		sbridge_put_devices(sbridge_dev);
+		free_sbridge_dev(sbridge_dev);
+	}
+}
+
+/*
+ *	sbridge_get_all_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+static int sbridge_get_onedevice(struct pci_dev **prev,
+				 u8 *num_mc,
+				 const struct pci_id_table *table,
+				 const unsigned devno)
+{
+	struct sbridge_dev *sbridge_dev;
+	const struct pci_id_descr *dev_descr = &table->descr[devno];
+
+	struct pci_dev *pdev = NULL;
+	u8 bus = 0;
+
+	sbridge_printk(KERN_INFO,
+		"Seeking for: dev %02x.%d PCI ID %04x:%04x\n",
+		dev_descr->dev, dev_descr->func,
+		PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			      dev_descr->dev_id, *prev);
+
+	if (!pdev) {
+		if (*prev) {
+			*prev = pdev;
+			return 0;
+		}
+
+		if (dev_descr->optional)
+			return 0;
+
+		if (devno == 0)
+			return -ENODEV;
+
+		sbridge_printk(KERN_INFO,
+			"Device not found: dev %02x.%d PCI ID %04x:%04x\n",
+			dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+		/* End of list, leave */
+		return -ENODEV;
+	}
+	bus = pdev->bus->number;
+
+	sbridge_dev = get_sbridge_dev(bus);
+	if (!sbridge_dev) {
+		sbridge_dev = alloc_sbridge_dev(bus, table);
+		if (!sbridge_dev) {
+			pci_dev_put(pdev);
+			return -ENOMEM;
+		}
+		(*num_mc)++;
+	}
+
+	if (sbridge_dev->pdev[devno]) {
+		sbridge_printk(KERN_ERR,
+			"Duplicated device for "
+			"dev %02x:%d.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		pci_dev_put(pdev);
+		return -ENODEV;
+	}
+
+	sbridge_dev->pdev[devno] = pdev;
+
+	/* Sanity check */
+	if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
+			PCI_FUNC(pdev->devfn) != dev_descr->func)) {
+		sbridge_printk(KERN_ERR,
+			"Device PCI ID %04x:%04x "
+			"has dev %02x:%d.%d instead of dev %02x:%02x.%d\n",
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
+			bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			bus, dev_descr->dev, dev_descr->func);
+		return -ENODEV;
+	}
+
+	/* Be sure that the device is enabled */
+	if (unlikely(pci_enable_device(pdev) < 0)) {
+		sbridge_printk(KERN_ERR,
+			"Couldn't enable "
+			"dev %02x:%d.%d PCI ID %04x:%04x\n",
+			bus, dev_descr->dev, dev_descr->func,
+			PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+		return -ENODEV;
+	}
+
+	debugf0("Detected dev %02x:%d.%d PCI ID %04x:%04x\n",
+		bus, dev_descr->dev,
+		dev_descr->func,
+		PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
+
+	/*
+	 * As stated on drivers/pci/search.c, the reference count for
+	 * @from is always decremented if it is not %NULL. So, as we need
+	 * to get all devices up to null, we need to do a get for the device
+	 */
+	pci_dev_get(pdev);
+
+	*prev = pdev;
+
+	return 0;
+}
+
+static int sbridge_get_all_devices(u8 *num_mc)
+{
+	int i, rc;
+	struct pci_dev *pdev = NULL;
+	const struct pci_id_table *table = pci_dev_descr_sbridge_table;
+
+	while (table && table->descr) {
+		for (i = 0; i < table->n_devs; i++) {
+			pdev = NULL;
+			do {
+				rc = sbridge_get_onedevice(&pdev, num_mc,
+							   table, i);
+				if (rc < 0) {
+					if (i == 0) {
+						i = table->n_devs;
+						break;
+					}
+					sbridge_put_all_devices();
+					return -ENODEV;
+				}
+			} while (pdev);
+		}
+		table++;
+	}
+
+	return 0;
+}
+
+static int mci_bind_devs(struct mem_ctl_info *mci,
+			 struct sbridge_dev *sbridge_dev)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	struct pci_dev *pdev;
+	int i, func, slot;
+
+	for (i = 0; i < sbridge_dev->n_devs; i++) {
+		pdev = sbridge_dev->pdev[i];
+		if (!pdev)
+			continue;
+		slot = PCI_SLOT(pdev->devfn);
+		func = PCI_FUNC(pdev->devfn);
+		switch (slot) {
+		case 12:
+			switch (func) {
+			case 6:
+				pvt->pci_sad0 = pdev;
+				break;
+			case 7:
+				pvt->pci_sad1 = pdev;
+				break;
+			default:
+				goto error;
+			}
+			break;
+		case 13:
+			switch (func) {
+			case 6:
+				pvt->pci_br = pdev;
+				break;
+			default:
+				goto error;
+			}
+			break;
+		case 14:
+			switch (func) {
+			case 0:
+				pvt->pci_ha0 = pdev;
+				break;
+			default:
+				goto error;
+			}
+			break;
+		case 15:
+			switch (func) {
+			case 0:
+				pvt->pci_ta = pdev;
+				break;
+			case 1:
+				pvt->pci_ras = pdev;
+				break;
+			case 2:
+			case 3:
+			case 4:
+			case 5:
+				pvt->pci_tad[func - 2] = pdev;
+				break;
+			default:
+				goto error;
+			}
+			break;
+		case 17:
+			switch (func) {
+			case 0:
+				pvt->pci_ddrio = pdev;
+				break;
+			default:
+				goto error;
+			}
+			break;
+		default:
+			goto error;
+		}
+
+		debugf0("Associated PCI %02x.%02d.%d with dev = %p\n",
+			sbridge_dev->bus,
+			PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
+			pdev);
+	}
+
+	/* Check if everything were registered */
+	if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha0 ||
+	    !pvt-> pci_tad || !pvt->pci_ras  || !pvt->pci_ta ||
+	    !pvt->pci_ddrio)
+		goto enodev;
+
+	for (i = 0; i < NUM_CHANNELS; i++) {
+		if (!pvt->pci_tad[i])
+			goto enodev;
+	}
+	return 0;
+
+enodev:
+	sbridge_printk(KERN_ERR, "Some needed devices are missing\n");
+	return -ENODEV;
+
+error:
+	sbridge_printk(KERN_ERR, "Device %d, function %d "
+		      "is out of the expected range\n",
+		      slot, func);
+	return -EINVAL;
+}
+
+/****************************************************************************
+			Error check routines
+ ****************************************************************************/
+
+/*
+ * While Sandy Bridge has error count registers, SMI BIOS read values from
+ * and resets the counters. So, they are not reliable for the OS to read
+ * from them. So, we have no option but to just trust on whatever MCE is
+ * telling us about the errors.
+ */
+static void sbridge_mce_output_error(struct mem_ctl_info *mci,
+				    const struct mce *m)
+{
+	struct mem_ctl_info *new_mci;
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	char *type, *optype, *msg, *recoverable_msg;
+	bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
+	bool overflow = GET_BITFIELD(m->status, 62, 62);
+	bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
+	bool recoverable = GET_BITFIELD(m->status, 56, 56);
+	u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
+	u32 mscod = GET_BITFIELD(m->status, 16, 31);
+	u32 errcode = GET_BITFIELD(m->status, 0, 15);
+	u32 channel = GET_BITFIELD(m->status, 0, 3);
+	u32 optypenum = GET_BITFIELD(m->status, 4, 6);
+	long channel_mask, first_channel;
+	u8  rank, socket;
+	int csrow, rc, dimm;
+	char *area_type = "Unknown";
+
+	if (ripv)
+		type = "NON_FATAL";
+	else
+		type = "FATAL";
+
+	/*
+	 * According with Table 15-9 of the Intel Archictecture spec vol 3A,
+	 * memory errors should fit in this mask:
+	 *	000f 0000 1mmm cccc (binary)
+	 * where:
+	 *	f = Correction Report Filtering Bit. If 1, subsequent errors
+	 *	    won't be shown
+	 *	mmm = error type
+	 *	cccc = channel
+	 * If the mask doesn't match, report an error to the parsing logic
+	 */
+	if (! ((errcode & 0xef80) == 0x80)) {
+		optype = "Can't parse: it is not a mem";
+	} else {
+		switch (optypenum) {
+		case 0:
+			optype = "generic undef request";
+			break;
+		case 1:
+			optype = "memory read";
+			break;
+		case 2:
+			optype = "memory write";
+			break;
+		case 3:
+			optype = "addr/cmd";
+			break;
+		case 4:
+			optype = "memory scrubbing";
+			break;
+		default:
+			optype = "reserved";
+			break;
+		}
+	}
+
+	rc = get_memory_error_data(mci, m->addr, &socket,
+				   &channel_mask, &rank, area_type);
+	if (rc < 0)
+		return;
+	new_mci = get_mci_for_node_id(socket);
+	if (!new_mci) {
+		edac_mc_handle_ce_no_info(mci, "Error: socket got corrupted!");
+		return;
+	}
+	mci = new_mci;
+	pvt = mci->pvt_info;
+
+	first_channel = find_first_bit(&channel_mask, NUM_CHANNELS);
+
+	if (rank < 4)
+		dimm = 0;
+	else if (rank < 8)
+		dimm = 1;
+	else
+		dimm = 2;
+
+	csrow = pvt->csrow_map[first_channel][dimm];
+
+	if (uncorrected_error && recoverable)
+		recoverable_msg = " recoverable";
+	else
+		recoverable_msg = "";
+
+	/*
+	 * FIXME: What should we do with "channel" information on mcelog?
+	 * Probably, we can just discard it, as the channel information
+	 * comes from the get_memory_error_data() address decoding
+	 */
+	msg = kasprintf(GFP_ATOMIC,
+			"%d %s error(s): %s on %s area %s%s: cpu=%d Err=%04x:%04x (ch=%d), "
+			"addr = 0x%08llx => socket=%d, Channel=%ld(mask=%ld), rank=%d\n",
+			core_err_cnt,
+			area_type,
+			optype,
+			type,
+			recoverable_msg,
+			overflow ? "OVERFLOW" : "",
+			m->cpu,
+			mscod, errcode,
+			channel,		/* 1111b means not specified */
+			(long long) m->addr,
+			socket,
+			first_channel,		/* This is the real channel on SB */
+			channel_mask,
+			rank);
+
+	debugf0("%s", msg);
+
+	/* Call the helper to output message */
+	if (uncorrected_error)
+		edac_mc_handle_fbd_ue(mci, csrow, 0, 0, msg);
+	else
+		edac_mc_handle_fbd_ce(mci, csrow, 0, msg);
+
+	kfree(msg);
+}
+
+/*
+ *	sbridge_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void sbridge_check_error(struct mem_ctl_info *mci)
+{
+	struct sbridge_pvt *pvt = mci->pvt_info;
+	int i;
+	unsigned count = 0;
+	struct mce *m;
+
+	/*
+	 * MCE first step: Copy all mce errors into a temporary buffer
+	 * We use a double buffering here, to reduce the risk of
+	 * loosing an error.
+	 */
+	smp_rmb();
+	count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
+		% MCE_LOG_LEN;
+	if (!count)
+		return;
+
+	m = pvt->mce_outentry;
+	if (pvt->mce_in + count > MCE_LOG_LEN) {
+		unsigned l = MCE_LOG_LEN - pvt->mce_in;
+
+		memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
+		smp_wmb();
+		pvt->mce_in = 0;
+		count -= l;
+		m += l;
+	}
+	memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
+	smp_wmb();
+	pvt->mce_in += count;
+
+	smp_rmb();
+	if (pvt->mce_overrun) {
+		sbridge_printk(KERN_ERR, "Lost %d memory errors\n",
+			      pvt->mce_overrun);
+		smp_wmb();
+		pvt->mce_overrun = 0;
+	}
+
+	/*
+	 * MCE second step: parse errors and display
+	 */
+	for (i = 0; i < count; i++)
+		sbridge_mce_output_error(mci, &pvt->mce_outentry[i]);
+}
+
+/*
+ * sbridge_mce_check_error	Replicates mcelog routine to get errors
+ *				This routine simply queues mcelog errors, and
+ *				return. The error itself should be handled later
+ *				by sbridge_check_error.
+ * WARNING: As this routine should be called at NMI time, extra care should
+ * be taken to avoid deadlocks, and to be as fast as possible.
+ */
+static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
+				   void *data)
+{
+	struct mce *mce = (struct mce *)data;
+	struct mem_ctl_info *mci;
+	struct sbridge_pvt *pvt;
+
+	mci = get_mci_for_node_id(mce->socketid);
+	if (!mci)
+		return NOTIFY_BAD;
+	pvt = mci->pvt_info;
+
+	/*
+	 * Just let mcelog handle it if the error is
+	 * outside the memory controller. A memory error
+	 * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0.
+	 * bit 12 has an special meaning.
+	 */
+	if ((mce->status & 0xefff) >> 7 != 1)
+		return NOTIFY_DONE;
+
+	printk("sbridge: HANDLING MCE MEMORY ERROR\n");
+
+	printk("CPU %d: Machine Check Exception: %Lx Bank %d: %016Lx\n",
+	       mce->extcpu, mce->mcgstatus, mce->bank, mce->status);
+	printk("TSC %llx ", mce->tsc);
+	printk("ADDR %llx ", mce->addr);
+	printk("MISC %llx ", mce->misc);
+
+	printk("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+		mce->cpuvendor, mce->cpuid, mce->time,
+		mce->socketid, mce->apicid);
+
+#ifdef CONFIG_SMP
+	/* Only handle if it is the right mc controller */
+	if (cpu_data(mce->cpu).phys_proc_id != pvt->sbridge_dev->mc)
+		return NOTIFY_DONE;
+#endif
+
+	smp_rmb();
+	if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
+		smp_wmb();
+		pvt->mce_overrun++;
+		return NOTIFY_DONE;
+	}
+
+	/* Copy memory error at the ringbuffer */
+	memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
+	smp_wmb();
+	pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
+
+	/* Handle fatal errors immediately */
+	if (mce->mcgstatus & 1)
+		sbridge_check_error(mci);
+
+	/* Advice mcelog that the error were handled */
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block sbridge_mce_dec = {
+	.notifier_call      = sbridge_mce_check_error,
+};
+
+/****************************************************************************
+			EDAC register/unregister logic
+ ****************************************************************************/
+
+static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev)
+{
+	struct mem_ctl_info *mci = sbridge_dev->mci;
+	struct sbridge_pvt *pvt;
+
+	if (unlikely(!mci || !mci->pvt_info)) {
+		debugf0("MC: " __FILE__ ": %s(): dev = %p\n",
+			__func__, &sbridge_dev->pdev[0]->dev);
+
+		sbridge_printk(KERN_ERR, "Couldn't find mci handler\n");
+		return;
+	}
+
+	pvt = mci->pvt_info;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+		__func__, mci, &sbridge_dev->pdev[0]->dev);
+
+	atomic_notifier_chain_unregister(&x86_mce_decoder_chain,
+					 &sbridge_mce_dec);
+
+	/* Remove MC sysfs nodes */
+	edac_mc_del_mc(mci->dev);
+
+	debugf1("%s: free mci struct\n", mci->ctl_name);
+	kfree(mci->ctl_name);
+	edac_mc_free(mci);
+	sbridge_dev->mci = NULL;
+}
+
+static int sbridge_register_mci(struct sbridge_dev *sbridge_dev)
+{
+	struct mem_ctl_info *mci;
+	struct sbridge_pvt *pvt;
+	int rc, channels, csrows;
+
+	/* Check the number of active and not disabled channels */
+	rc = sbridge_get_active_channels(sbridge_dev->bus, &channels, &csrows);
+	if (unlikely(rc < 0))
+		return rc;
+
+	/* allocate a new MC control structure */
+	mci = edac_mc_alloc(sizeof(*pvt), csrows, channels, sbridge_dev->mc);
+	if (unlikely(!mci))
+		return -ENOMEM;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
+		__func__, mci, &sbridge_dev->pdev[0]->dev);
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+
+	/* Associate sbridge_dev and mci for future usage */
+	pvt->sbridge_dev = sbridge_dev;
+	sbridge_dev->mci = mci;
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "sbridge_edac.c";
+	mci->mod_ver = SBRIDGE_REVISION;
+	mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge Socket#%d", mci->mc_idx);
+	mci->dev_name = pci_name(sbridge_dev->pdev[0]);
+	mci->ctl_page_to_phys = NULL;
+
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = sbridge_check_error;
+
+	/* Store pci devices at mci for faster access */
+	rc = mci_bind_devs(mci, sbridge_dev);
+	if (unlikely(rc < 0))
+		goto fail0;
+
+	/* Get dimm basic config and the memory layout */
+	get_dimm_config(mci);
+	get_memory_layout(mci);
+
+	/* record ptr to the generic device */
+	mci->dev = &sbridge_dev->pdev[0]->dev;
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (unlikely(edac_mc_add_mc(mci))) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mc_add_mc()\n", __func__);
+		rc = -EINVAL;
+		goto fail0;
+	}
+
+	atomic_notifier_chain_register(&x86_mce_decoder_chain,
+				       &sbridge_mce_dec);
+	return 0;
+
+fail0:
+	kfree(mci->ctl_name);
+	edac_mc_free(mci);
+	sbridge_dev->mci = NULL;
+	return rc;
+}
+
+/*
+ *	sbridge_probe	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+
+static int __devinit sbridge_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	int rc;
+	u8 mc, num_mc = 0;
+	struct sbridge_dev *sbridge_dev;
+
+	/* get the pci devices we want to reserve for our use */
+	mutex_lock(&sbridge_edac_lock);
+
+	/*
+	 * All memory controllers are allocated at the first pass.
+	 */
+	if (unlikely(probed >= 1)) {
+		mutex_unlock(&sbridge_edac_lock);
+		return -ENODEV;
+	}
+	probed++;
+
+	rc = sbridge_get_all_devices(&num_mc);
+	if (unlikely(rc < 0))
+		goto fail0;
+	mc = 0;
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) {
+		debugf0("Registering MC#%d (%d of %d)\n", mc, mc + 1, num_mc);
+		sbridge_dev->mc = mc++;
+		rc = sbridge_register_mci(sbridge_dev);
+		if (unlikely(rc < 0))
+			goto fail1;
+	}
+
+	sbridge_printk(KERN_INFO, "Driver loaded.\n");
+
+	mutex_unlock(&sbridge_edac_lock);
+	return 0;
+
+fail1:
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+		sbridge_unregister_mci(sbridge_dev);
+
+	sbridge_put_all_devices();
+fail0:
+	mutex_unlock(&sbridge_edac_lock);
+	return rc;
+}
+
+/*
+ *	sbridge_remove	destructor for one instance of device
+ *
+ */
+static void __devexit sbridge_remove(struct pci_dev *pdev)
+{
+	struct sbridge_dev *sbridge_dev;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+
+	/*
+	 * we have a trouble here: pdev value for removal will be wrong, since
+	 * it will point to the X58 register used to detect that the machine
+	 * is a Nehalem or upper design. However, due to the way several PCI
+	 * devices are grouped together to provide MC functionality, we need
+	 * to use a different method for releasing the devices
+	 */
+
+	mutex_lock(&sbridge_edac_lock);
+
+	if (unlikely(!probed)) {
+		mutex_unlock(&sbridge_edac_lock);
+		return;
+	}
+
+	list_for_each_entry(sbridge_dev, &sbridge_edac_list, list)
+		sbridge_unregister_mci(sbridge_dev);
+
+	/* Release PCI resources */
+	sbridge_put_all_devices();
+
+	probed--;
+
+	mutex_unlock(&sbridge_edac_lock);
+}
+
+MODULE_DEVICE_TABLE(pci, sbridge_pci_tbl);
+
+/*
+ *	sbridge_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver sbridge_driver = {
+	.name     = "sbridge_edac",
+	.probe    = sbridge_probe,
+	.remove   = __devexit_p(sbridge_remove),
+	.id_table = sbridge_pci_tbl,
+};
+
+/*
+ *	sbridge_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init sbridge_init(void)
+{
+	int pci_rc;
+
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&sbridge_driver);
+
+	if (pci_rc >= 0)
+		return 0;
+
+	sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
+		      pci_rc);
+
+	return pci_rc;
+}
+
+/*
+ *	sbridge_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit sbridge_exit(void)
+{
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+	pci_unregister_driver(&sbridge_driver);
+}
+
+module_init(sbridge_init);
+module_exit(sbridge_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge memory controllers - "
+		   SBRIDGE_REVISION);

include/linux/edac.h

@@ -42,4 +42,354 @@ static inline void opstate_init(void)
 	return;
 }
 
+#define EDAC_MC_LABEL_LEN	31
+#define MC_PROC_NAME_MAX_LEN	7
+
+/* memory devices */
+enum dev_type {
+	DEV_UNKNOWN = 0,
+	DEV_X1,
+	DEV_X2,
+	DEV_X4,
+	DEV_X8,
+	DEV_X16,
+	DEV_X32,		/* Do these parts exist? */
+	DEV_X64			/* Do these parts exist? */
+};
+
+#define DEV_FLAG_UNKNOWN	BIT(DEV_UNKNOWN)
+#define DEV_FLAG_X1		BIT(DEV_X1)
+#define DEV_FLAG_X2		BIT(DEV_X2)
+#define DEV_FLAG_X4		BIT(DEV_X4)
+#define DEV_FLAG_X8		BIT(DEV_X8)
+#define DEV_FLAG_X16		BIT(DEV_X16)
+#define DEV_FLAG_X32		BIT(DEV_X32)
+#define DEV_FLAG_X64		BIT(DEV_X64)
+
+/* memory types */
+enum mem_type {
+	MEM_EMPTY = 0,		/* Empty csrow */
+	MEM_RESERVED,		/* Reserved csrow type */
+	MEM_UNKNOWN,		/* Unknown csrow type */
+	MEM_FPM,		/* Fast page mode */
+	MEM_EDO,		/* Extended data out */
+	MEM_BEDO,		/* Burst Extended data out */
+	MEM_SDR,		/* Single data rate SDRAM */
+	MEM_RDR,		/* Registered single data rate SDRAM */
+	MEM_DDR,		/* Double data rate SDRAM */
+	MEM_RDDR,		/* Registered Double data rate SDRAM */
+	MEM_RMBS,		/* Rambus DRAM */
+	MEM_DDR2,		/* DDR2 RAM */
+	MEM_FB_DDR2,		/* fully buffered DDR2 */
+	MEM_RDDR2,		/* Registered DDR2 RAM */
+	MEM_XDR,		/* Rambus XDR */
+	MEM_DDR3,		/* DDR3 RAM */
+	MEM_RDDR3,		/* Registered DDR3 RAM */
+};
+
+#define MEM_FLAG_EMPTY		BIT(MEM_EMPTY)
+#define MEM_FLAG_RESERVED	BIT(MEM_RESERVED)
+#define MEM_FLAG_UNKNOWN	BIT(MEM_UNKNOWN)
+#define MEM_FLAG_FPM		BIT(MEM_FPM)
+#define MEM_FLAG_EDO		BIT(MEM_EDO)
+#define MEM_FLAG_BEDO		BIT(MEM_BEDO)
+#define MEM_FLAG_SDR		BIT(MEM_SDR)
+#define MEM_FLAG_RDR		BIT(MEM_RDR)
+#define MEM_FLAG_DDR		BIT(MEM_DDR)
+#define MEM_FLAG_RDDR		BIT(MEM_RDDR)
+#define MEM_FLAG_RMBS		BIT(MEM_RMBS)
+#define MEM_FLAG_DDR2           BIT(MEM_DDR2)
+#define MEM_FLAG_FB_DDR2        BIT(MEM_FB_DDR2)
+#define MEM_FLAG_RDDR2          BIT(MEM_RDDR2)
+#define MEM_FLAG_XDR            BIT(MEM_XDR)
+#define MEM_FLAG_DDR3		 BIT(MEM_DDR3)
+#define MEM_FLAG_RDDR3		 BIT(MEM_RDDR3)
+
+/* chipset Error Detection and Correction capabilities and mode */
+enum edac_type {
+	EDAC_UNKNOWN = 0,	/* Unknown if ECC is available */
+	EDAC_NONE,		/* Doesn't support ECC */
+	EDAC_RESERVED,		/* Reserved ECC type */
+	EDAC_PARITY,		/* Detects parity errors */
+	EDAC_EC,		/* Error Checking - no correction */
+	EDAC_SECDED,		/* Single bit error correction, Double detection */
+	EDAC_S2ECD2ED,		/* Chipkill x2 devices - do these exist? */
+	EDAC_S4ECD4ED,		/* Chipkill x4 devices */
+	EDAC_S8ECD8ED,		/* Chipkill x8 devices */
+	EDAC_S16ECD16ED,	/* Chipkill x16 devices */
+};
+
+#define EDAC_FLAG_UNKNOWN	BIT(EDAC_UNKNOWN)
+#define EDAC_FLAG_NONE		BIT(EDAC_NONE)
+#define EDAC_FLAG_PARITY	BIT(EDAC_PARITY)
+#define EDAC_FLAG_EC		BIT(EDAC_EC)
+#define EDAC_FLAG_SECDED	BIT(EDAC_SECDED)
+#define EDAC_FLAG_S2ECD2ED	BIT(EDAC_S2ECD2ED)
+#define EDAC_FLAG_S4ECD4ED	BIT(EDAC_S4ECD4ED)
+#define EDAC_FLAG_S8ECD8ED	BIT(EDAC_S8ECD8ED)
+#define EDAC_FLAG_S16ECD16ED	BIT(EDAC_S16ECD16ED)
+
+/* scrubbing capabilities */
+enum scrub_type {
+	SCRUB_UNKNOWN = 0,	/* Unknown if scrubber is available */
+	SCRUB_NONE,		/* No scrubber */
+	SCRUB_SW_PROG,		/* SW progressive (sequential) scrubbing */
+	SCRUB_SW_SRC,		/* Software scrub only errors */
+	SCRUB_SW_PROG_SRC,	/* Progressive software scrub from an error */
+	SCRUB_SW_TUNABLE,	/* Software scrub frequency is tunable */
+	SCRUB_HW_PROG,		/* HW progressive (sequential) scrubbing */
+	SCRUB_HW_SRC,		/* Hardware scrub only errors */
+	SCRUB_HW_PROG_SRC,	/* Progressive hardware scrub from an error */
+	SCRUB_HW_TUNABLE	/* Hardware scrub frequency is tunable */
+};
+
+#define SCRUB_FLAG_SW_PROG	BIT(SCRUB_SW_PROG)
+#define SCRUB_FLAG_SW_SRC	BIT(SCRUB_SW_SRC)
+#define SCRUB_FLAG_SW_PROG_SRC	BIT(SCRUB_SW_PROG_SRC)
+#define SCRUB_FLAG_SW_TUN	BIT(SCRUB_SW_SCRUB_TUNABLE)
+#define SCRUB_FLAG_HW_PROG	BIT(SCRUB_HW_PROG)
+#define SCRUB_FLAG_HW_SRC	BIT(SCRUB_HW_SRC)
+#define SCRUB_FLAG_HW_PROG_SRC	BIT(SCRUB_HW_PROG_SRC)
+#define SCRUB_FLAG_HW_TUN	BIT(SCRUB_HW_TUNABLE)
+
+/* FIXME - should have notify capabilities: NMI, LOG, PROC, etc */
+
+/* EDAC internal operation states */
+#define	OP_ALLOC		0x100
+#define OP_RUNNING_POLL		0x201
+#define OP_RUNNING_INTERRUPT	0x202
+#define OP_RUNNING_POLL_INTR	0x203
+#define OP_OFFLINE		0x300
+
+/*
+ * There are several things to be aware of that aren't at all obvious:
+ *
+ *
+ * SOCKETS, SOCKET SETS, BANKS, ROWS, CHIP-SELECT ROWS, CHANNELS, etc..
+ *
+ * These are some of the many terms that are thrown about that don't always
+ * mean what people think they mean (Inconceivable!).  In the interest of
+ * creating a common ground for discussion, terms and their definitions
+ * will be established.
+ *
+ * Memory devices:	The individual chip on a memory stick.  These devices
+ *			commonly output 4 and 8 bits each.  Grouping several
+ *			of these in parallel provides 64 bits which is common
+ *			for a memory stick.
+ *
+ * Memory Stick:	A printed circuit board that aggregates multiple
+ *			memory devices in parallel.  This is the atomic
+ *			memory component that is purchaseable by Joe consumer
+ *			and loaded into a memory socket.
+ *
+ * Socket:		A physical connector on the motherboard that accepts
+ *			a single memory stick.
+ *
+ * Channel:		Set of memory devices on a memory stick that must be
+ *			grouped in parallel with one or more additional
+ *			channels from other memory sticks.  This parallel
+ *			grouping of the output from multiple channels are
+ *			necessary for the smallest granularity of memory access.
+ *			Some memory controllers are capable of single channel -
+ *			which means that memory sticks can be loaded
+ *			individually.  Other memory controllers are only
+ *			capable of dual channel - which means that memory
+ *			sticks must be loaded as pairs (see "socket set").
+ *
+ * Chip-select row:	All of the memory devices that are selected together.
+ *			for a single, minimum grain of memory access.
+ *			This selects all of the parallel memory devices across
+ *			all of the parallel channels.  Common chip-select rows
+ *			for single channel are 64 bits, for dual channel 128
+ *			bits.
+ *
+ * Single-Ranked stick:	A Single-ranked stick has 1 chip-select row of memory.
+ *			Motherboards commonly drive two chip-select pins to
+ *			a memory stick. A single-ranked stick, will occupy
+ *			only one of those rows. The other will be unused.
+ *
+ * Double-Ranked stick:	A double-ranked stick has two chip-select rows which
+ *			access different sets of memory devices.  The two
+ *			rows cannot be accessed concurrently.
+ *
+ * Double-sided stick:	DEPRECATED TERM, see Double-Ranked stick.
+ *			A double-sided stick has two chip-select rows which
+ *			access different sets of memory devices.  The two
+ *			rows cannot be accessed concurrently.  "Double-sided"
+ *			is irrespective of the memory devices being mounted
+ *			on both sides of the memory stick.
+ *
+ * Socket set:		All of the memory sticks that are required for
+ *			a single memory access or all of the memory sticks
+ *			spanned by a chip-select row.  A single socket set
+ *			has two chip-select rows and if double-sided sticks
+ *			are used these will occupy those chip-select rows.
+ *
+ * Bank:		This term is avoided because it is unclear when
+ *			needing to distinguish between chip-select rows and
+ *			socket sets.
+ *
+ * Controller pages:
+ *
+ * Physical pages:
+ *
+ * Virtual pages:
+ *
+ *
+ * STRUCTURE ORGANIZATION AND CHOICES
+ *
+ *
+ *
+ * PS - I enjoyed writing all that about as much as you enjoyed reading it.
+ */
+
+struct channel_info {
+	int chan_idx;		/* channel index */
+	u32 ce_count;		/* Correctable Errors for this CHANNEL */
+	char label[EDAC_MC_LABEL_LEN + 1];	/* DIMM label on motherboard */
+	struct csrow_info *csrow;	/* the parent */
+};
+
+struct csrow_info {
+	unsigned long first_page;	/* first page number in dimm */
+	unsigned long last_page;	/* last page number in dimm */
+	unsigned long page_mask;	/* used for interleaving -
+					 * 0UL for non intlv
+					 */
+	u32 nr_pages;		/* number of pages in csrow */
+	u32 grain;		/* granularity of reported error in bytes */
+	int csrow_idx;		/* the chip-select row */
+	enum dev_type dtype;	/* memory device type */
+	u32 ue_count;		/* Uncorrectable Errors for this csrow */
+	u32 ce_count;		/* Correctable Errors for this csrow */
+	enum mem_type mtype;	/* memory csrow type */
+	enum edac_type edac_mode;	/* EDAC mode for this csrow */
+	struct mem_ctl_info *mci;	/* the parent */
+
+	struct kobject kobj;	/* sysfs kobject for this csrow */
+
+	/* channel information for this csrow */
+	u32 nr_channels;
+	struct channel_info *channels;
+};
+
+struct mcidev_sysfs_group {
+	const char *name;				/* group name */
+	const struct mcidev_sysfs_attribute *mcidev_attr; /* group attributes */
+};
+
+struct mcidev_sysfs_group_kobj {
+	struct list_head list;		/* list for all instances within a mc */
+
+	struct kobject kobj;		/* kobj for the group */
+
+	const struct mcidev_sysfs_group *grp;	/* group description table */
+	struct mem_ctl_info *mci;	/* the parent */
+};
+
+/* mcidev_sysfs_attribute structure
+ *	used for driver sysfs attributes and in mem_ctl_info
+ * 	sysfs top level entries
+ */
+struct mcidev_sysfs_attribute {
+	/* It should use either attr or grp */
+	struct attribute attr;
+	const struct mcidev_sysfs_group *grp;	/* Points to a group of attributes */
+
+	/* Ops for show/store values at the attribute - not used on group */
+        ssize_t (*show)(struct mem_ctl_info *,char *);
+        ssize_t (*store)(struct mem_ctl_info *, const char *,size_t);
+};
+
+/* MEMORY controller information structure
+ */
+struct mem_ctl_info {
+	struct list_head link;	/* for global list of mem_ctl_info structs */
+
+	struct module *owner;	/* Module owner of this control struct */
+
+	unsigned long mtype_cap;	/* memory types supported by mc */
+	unsigned long edac_ctl_cap;	/* Mem controller EDAC capabilities */
+	unsigned long edac_cap;	/* configuration capabilities - this is
+				 * closely related to edac_ctl_cap.  The
+				 * difference is that the controller may be
+				 * capable of s4ecd4ed which would be listed
+				 * in edac_ctl_cap, but if channels aren't
+				 * capable of s4ecd4ed then the edac_cap would
+				 * not have that capability.
+				 */
+	unsigned long scrub_cap;	/* chipset scrub capabilities */
+	enum scrub_type scrub_mode;	/* current scrub mode */
+
+	/* Translates sdram memory scrub rate given in bytes/sec to the
+	   internal representation and configures whatever else needs
+	   to be configured.
+	 */
+	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
+
+	/* Get the current sdram memory scrub rate from the internal
+	   representation and converts it to the closest matching
+	   bandwidth in bytes/sec.
+	 */
+	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
+
+
+	/* pointer to edac checking routine */
+	void (*edac_check) (struct mem_ctl_info * mci);
+
+	/*
+	 * Remaps memory pages: controller pages to physical pages.
+	 * For most MC's, this will be NULL.
+	 */
+	/* FIXME - why not send the phys page to begin with? */
+	unsigned long (*ctl_page_to_phys) (struct mem_ctl_info * mci,
+					   unsigned long page);
+	int mc_idx;
+	int nr_csrows;
+	struct csrow_info *csrows;
+	/*
+	 * FIXME - what about controllers on other busses? - IDs must be
+	 * unique.  dev pointer should be sufficiently unique, but
+	 * BUS:SLOT.FUNC numbers may not be unique.
+	 */
+	struct device *dev;
+	const char *mod_name;
+	const char *mod_ver;
+	const char *ctl_name;
+	const char *dev_name;
+	char proc_name[MC_PROC_NAME_MAX_LEN + 1];
+	void *pvt_info;
+	u32 ue_noinfo_count;	/* Uncorrectable Errors w/o info */
+	u32 ce_noinfo_count;	/* Correctable Errors w/o info */
+	u32 ue_count;		/* Total Uncorrectable Errors for this MC */
+	u32 ce_count;		/* Total Correctable Errors for this MC */
+	unsigned long start_time;	/* mci load start time (in jiffies) */
+
+	struct completion complete;
+
+	/* edac sysfs device control */
+	struct kobject edac_mci_kobj;
+
+	/* list for all grp instances within a mc */
+	struct list_head grp_kobj_list;
+
+	/* Additional top controller level attributes, but specified
+	 * by the low level driver.
+	 *
+	 * Set by the low level driver to provide attributes at the
+	 * controller level, same level as 'ue_count' and 'ce_count' above.
+	 * An array of structures, NULL terminated
+	 *
+	 * If attributes are desired, then set to array of attributes
+	 * If no attributes are desired, leave NULL
+	 */
+	const struct mcidev_sysfs_attribute *mc_driver_sysfs_attributes;
+
+	/* work struct for this MC */
+	struct delayed_work work;
+
+	/* the internal state of this controller instance */
+	int op_state;
+};
+
 #endif

include/linux/edac_mce.h

-/* Provides edac interface to mcelog events
- *
- * This file may be distributed under the terms of the
- * GNU General Public License version 2.
- *
- * Copyright (c) 2009 by:
- *	 Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * Red Hat Inc. http://www.redhat.com
- */
-
-#if defined(CONFIG_EDAC_MCE) || \
-			(defined(CONFIG_EDAC_MCE_MODULE) && defined(MODULE))
-
-#include <asm/mce.h>
-#include <linux/list.h>
-
-struct edac_mce {
-	struct list_head list;
-
-	void *priv;
-	int (*check_error)(void *priv, struct mce *mce);
-};
-
-int edac_mce_register(struct edac_mce *edac_mce);
-void edac_mce_unregister(struct edac_mce *edac_mce);
-int edac_mce_parse(struct mce *mce);
-
-#else
-#define edac_mce_parse(mce) (0)
-#endif