Commit 668f4729 authored by Stanimir Varbanov's avatar Stanimir Varbanov Committed by Bjorn Helgaas

ARM: dts: ifc6410: enable PCIe DT node for this board

Enable PCIe DT node and fill PCIe DT node with regulator, pinctrl and reset
GPIO, to use the PCIe on the ifc6410 board.
Signed-off-by: default avatarStanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent bcc74b09
...@@ -47,6 +47,18 @@ mux { ...@@ -47,6 +47,18 @@ mux {
bias-disable; bias-disable;
}; };
}; };
pcie_pins: pcie_pinmux {
mux {
pins = "gpio27";
function = "gpio";
};
conf {
pins = "gpio27";
drive-strength = <12>;
bias-disable;
};
};
}; };
rpm@108000 { rpm@108000 {
...@@ -123,6 +135,10 @@ pm8921_l23: l23 { ...@@ -123,6 +135,10 @@ pm8921_l23: l23 {
pm8921_lvs1: lvs1 { pm8921_lvs1: lvs1 {
bias-pull-down; bias-pull-down;
}; };
lvs6 {
bias-pull-down;
};
}; };
}; };
...@@ -231,6 +247,16 @@ usb4: usb@12530000 { ...@@ -231,6 +247,16 @@ usb4: usb@12530000 {
status = "okay"; status = "okay";
}; };
pci@1b500000 {
status = "ok";
vdda-supply = <&pm8921_s3>;
vdda_phy-supply = <&pm8921_lvs6>;
vdda_refclk-supply = <&ext_3p3v>;
pinctrl-0 = <&pcie_pins>;
pinctrl-names = "default";
perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
};
qcom,ssbi@500000 { qcom,ssbi@500000 {
pmic@0 { pmic@0 {
gpio@150 { gpio@150 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment