Commit 66acaf3f authored by Shawn Guo's avatar Shawn Guo

ARM: mxs: saif0 is the clock provider to sgtl5000

These systems all use saif0 as the mclock provider to codec sgtl5000.
Reflect that in device tree source, so that sgtl5000 can find the clock
by calling clk_get().
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 3b79cd15
...@@ -147,7 +147,7 @@ sgtl5000: codec@0a { ...@@ -147,7 +147,7 @@ sgtl5000: codec@0a {
reg = <0x0a>; reg = <0x0a>;
VDDA-supply = <&reg_3p3v>; VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>;
clocks = <&saif0>;
}; };
pcf8563: rtc@51 { pcf8563: rtc@51 {
......
...@@ -195,7 +195,7 @@ sgtl5000: codec@0a { ...@@ -195,7 +195,7 @@ sgtl5000: codec@0a {
reg = <0x0a>; reg = <0x0a>;
VDDA-supply = <&reg_3p3v>; VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>;
clocks = <&saif0>;
}; };
at24@51 { at24@51 {
......
...@@ -184,7 +184,7 @@ sgtl5000: codec@0a { ...@@ -184,7 +184,7 @@ sgtl5000: codec@0a {
reg = <0x0a>; reg = <0x0a>;
VDDA-supply = <&reg_3p3v>; VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>; VDDIO-supply = <&reg_3p3v>;
clocks = <&saif0>;
}; };
eeprom: eeprom@51 { eeprom: eeprom@51 {
......
...@@ -837,6 +837,7 @@ saif0: saif@80042000 { ...@@ -837,6 +837,7 @@ saif0: saif@80042000 {
compatible = "fsl,imx28-saif"; compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>; reg = <0x80042000 0x2000>;
interrupts = <59 80>; interrupts = <59 80>;
#clock-cells = <0>;
clocks = <&clks 53>; clocks = <&clks 53>;
dmas = <&dma_apbx 4>; dmas = <&dma_apbx 4>;
dma-names = "rx-tx"; dma-names = "rx-tx";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment