Skip to content

L
linux
Commit 67680f87 authored by Ondrej Jirman's avatar Ondrej Jirman Committed by Sam Ravnborg
Browse files
Options

drm/panel: st7703: Add support for Xingbangda XBD599 

Xingbangda XBD599 is a 5.99" 720x1440 MIPI-DSI LCD panel used in
PinePhone. Add support for it.
Signed-off-by: default avatarIcenowy Zheng <icenowy@aosc.io>
Signed-off-by: default avatarOndrej Jirman <megous@megous.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Tested-by: default avatarGuido Günther <agx@sigxcpu.org>
Reviewed-by: default avatarGuido Günther <agx@sigxcpu.org>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-10-megous@megous.com
parent e609fb1e
Hide whitespace changes
Inline Side-by-side
Showing with 197 additions and 2 deletions
drivers/gpu/drm/panel/panel-sitronix-st7703.c
View file @ 67680f87
...@@ -39,10 +39,11 @@ ...@@ -39,10 +39,11 @@
#define ST7703_CMD_SETEXTC 0xB9 #define ST7703_CMD_SETEXTC 0xB9
#define ST7703_CMD_SETMIPI 0xBA #define ST7703_CMD_SETMIPI 0xBA
#define ST7703_CMD_SETVDC 0xBC #define ST7703_CMD_SETVDC 0xBC
#define ST7703_CMD_UNKNOWN0 0xBF #define ST7703_CMD_UNKNOWN_BF 0xBF
#define ST7703_CMD_SETSCR 0xC0 #define ST7703_CMD_SETSCR 0xC0
#define ST7703_CMD_SETPOWER 0xC1 #define ST7703_CMD_SETPOWER 0xC1
#define ST7703_CMD_SETPANEL 0xCC #define ST7703_CMD_SETPANEL 0xCC
#define ST7703_CMD_UNKNOWN_C6 0xC6
#define ST7703_CMD_SETGAMMA 0xE0 #define ST7703_CMD_SETGAMMA 0xE0
#define ST7703_CMD_SETEQ 0xE3 #define ST7703_CMD_SETEQ 0xE3
#define ST7703_CMD_SETGIP1 0xE9 #define ST7703_CMD_SETGIP1 0xE9
...@@ -109,7 +110,7 @@ static int jh057n_init_sequence(struct st7703 *ctx) ...@@ -109,7 +110,7 @@ static int jh057n_init_sequence(struct st7703 *ctx)
msleep(20); msleep(20);
dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F); dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00); dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1, dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12, 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38, 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
...@@ -162,6 +163,199 @@ struct st7703_panel_desc jh057n00900_panel_desc = { ...@@ -162,6 +163,199 @@ struct st7703_panel_desc jh057n00900_panel_desc = {
.init_sequence = jh057n_init_sequence, .init_sequence = jh057n_init_sequence,
}; };
#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
static const u8 d[] = { seq }; \
int ret; \
ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
if (ret < 0) \
return ret; \
} while (0)
static int xbd599_init_sequence(struct st7703 *ctx)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
/*
* Init sequence was supplied by the panel vendor.
*/
/* Magic sequence to unlock user commands below. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xF1, 0x12, 0x83);
dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI,
0x33, /* VC_main = 0, Lane_Number = 3 (4 lanes) */
0x81, /* DSI_LDO_SEL = 1.7V, RTERM = 90 Ohm */
0x05, /* IHSRX = x6 (Low High Speed driving ability) */
0xF9, /* TX_CLK_SEL = fDSICLK/16 */
0x0E, /* HFP_OSC (min. HFP number in DSI mode) */
0x0E, /* HBP_OSC (min. HBP number in DSI mode) */
/* The rest is undocumented in ST7703 datasheet */
0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x44, 0x25, 0x00, 0x91, 0x0a, 0x00, 0x00, 0x02,
0x4F, 0x11, 0x00, 0x00, 0x37);
dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT,
0x25, /* PCCS = 2, ECP_DC_DIV = 1/4 HSYNC */
0x22, /* DT = 15ms XDK_ECP = x2 */
0x20, /* PFM_DC_DIV = /1 */
0x03 /* ECP_SYNC_EN = 1, VGX_SYNC_EN = 1 */);
/* RGB I/F porch timing */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF,
0x10, /* VBP_RGB_GEN */
0x10, /* VFP_RGB_GEN */
0x05, /* DE_BP_RGB_GEN */
0x05, /* DE_FP_RGB_GEN */
/* The rest is undocumented in ST7703 datasheet */
0x03, 0xFF,
0x00, 0x00,
0x00, 0x00);
/* Source driving settings. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR,
0x73, /* N_POPON */
0x73, /* N_NOPON */
0x50, /* I_POPON */
0x50, /* I_NOPON */
0x00, /* SCR[31,24] */
0xC0, /* SCR[23,16] */
0x08, /* SCR[15,8] */
0x70, /* SCR[7,0] */
0x00 /* Undocumented */);
/* NVDDD_SEL = -1.8V, VDDD_SEL = out of range (possibly 1.9V?) */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
/*
* SS_PANEL = 1 (reverse scan), GS_PANEL = 0 (normal scan)
* REV_PANEL = 1 (normally black panel), BGR_PANEL = 1 (BGR)
*/
dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
/* Zig-Zag Type C column inversion. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
/* Set display resolution. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP,
0xF0, /* NL = 240 */
0x12, /* RES_V_LSB = 0, BLK_CON = VSSD,
* RESO_SEL = 720RGB
*/
0xF0 /* WHITE_GND_EN = 1 (GND),
* WHITE_FRAME_SEL = 7 frames,
* ISC = 0 frames
*/);
dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ,
0x00, /* PNOEQ */
0x00, /* NNOEQ */
0x0B, /* PEQGND */
0x0B, /* NEQGND */
0x10, /* PEQVCI */
0x10, /* NEQVCI */
0x00, /* PEQVCI1 */
0x00, /* NEQVCI1 */
0x00, /* reserved */
0x00, /* reserved */
0xFF, /* reserved */
0x00, /* reserved */
0xC0, /* ESD_DET_DATA_WHITE = 1, ESD_WHITE_EN = 1 */
0x10 /* SLPIN_OPTION = 1 (no need vsync after sleep-in)
* VEDIO_NO_CHECK_EN = 0
* ESD_WHITE_GND_EN = 0
* ESD_DET_TIME_SEL = 0 frames
*/);
/* Undocumented command. */
dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_C6, 0x01, 0x00, 0xFF, 0xFF, 0x00);
dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER,
0x74, /* VBTHS, VBTLS: VGH = 17V, VBL = -11V */
0x00, /* FBOFF_VGH = 0, FBOFF_VGL = 0 */
0x32, /* VRP */
0x32, /* VRN */
0x77, /* reserved */
0xF1, /* APS = 1 (small),
* VGL_DET_EN = 1, VGH_DET_EN = 1,
* VGL_TURBO = 1, VGH_TURBO = 1
*/
0xFF, /* VGH1_L_DIV, VGL1_L_DIV (1.5MHz) */
0xFF, /* VGH1_R_DIV, VGL1_R_DIV (1.5MHz) */
0xCC, /* VGH2_L_DIV, VGL2_L_DIV (2.6MHz) */
0xCC, /* VGH2_R_DIV, VGL2_R_DIV (2.6MHz) */
0x77, /* VGH3_L_DIV, VGL3_L_DIV (4.5MHz) */
0x77 /* VGH3_R_DIV, VGL3_R_DIV (4.5MHz) */);
/* Reference voltage. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP,
0x07, /* VREF_SEL = 4.2V */
0x07 /* NVREF_SEL = 4.2V */);
msleep(20);
dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM,
0x2C, /* VCOMDC_F = -0.67V */
0x2C /* VCOMDC_B = -0.67V */);
/* Undocumented command. */
dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
/* This command is to set forward GIP timing. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1,
0x82, 0x10, 0x06, 0x05, 0xA2, 0x0A, 0xA5, 0x12,
0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
/* This command is to set backward GIP timing. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2,
0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x0A,
0xA5, 0x00, 0x00, 0x00, 0x00);
/* Adjust the gamma characteristics of the panel. */
dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA,
0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41, 0x35,
0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12, 0x12,
0x18, 0x00, 0x09, 0x0D, 0x23, 0x27, 0x3C, 0x41,
0x35, 0x07, 0x0D, 0x0E, 0x12, 0x13, 0x10, 0x12,
0x12, 0x18);
return 0;
}
static const struct drm_display_mode xbd599_mode = {
.hdisplay = 720,
.hsync_start = 720 + 40,
.hsync_end = 720 + 40 + 40,
.htotal = 720 + 40 + 40 + 40,
.vdisplay = 1440,
.vsync_start = 1440 + 18,
.vsync_end = 1440 + 18 + 10,
.vtotal = 1440 + 18 + 10 + 17,
.clock = 69000,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
.width_mm = 68,
.height_mm = 136,
};
static const struct st7703_panel_desc xbd599_desc = {
.mode = &xbd599_mode,
.lanes = 4,
.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
.format = MIPI_DSI_FMT_RGB888,
.init_sequence = xbd599_init_sequence,
};
static int st7703_enable(struct drm_panel *panel) static int st7703_enable(struct drm_panel *panel)
{ {
struct st7703 *ctx = panel_to_st7703(panel); struct st7703 *ctx = panel_to_st7703(panel);
...@@ -427,6 +621,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi) ...@@ -427,6 +621,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
static const struct of_device_id st7703_of_match[] = { static const struct of_device_id st7703_of_match[] = {
{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc }, { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
{ /* sentinel */ } { /* sentinel */ }
}; };
MODULE_DEVICE_TABLE(of, st7703_of_match); MODULE_DEVICE_TABLE(of, st7703_of_match);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7