drm/panel: Add Samsung S6D7AA0 panel controller driver

Initial driver for S6D7AA0-controlled panels. Currently, the following
panels are supported:

 - S6D7AA0-LSL080AL02 (Samsung Galaxy Tab 3 8.0)
 - S6D7AA0-LSL080AL03 (Samsung Galaxy Tab A 8.0 2015)
 - S6D7AA0-LTL101AT01 (Samsung Galaxy Tab A 9.7 2015)

It should be possible to extend this driver to work with other panels
using this IC.

Tested-by: Nikita Travkin <nikita@trvn.ru> #ltl101at01
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-3-aweber.kernel@gmail.com

drivers/gpu/drm/panel/Kconfig

@@ -553,6 +553,13 @@ config DRM_PANEL_SAMSUNG_S6D27A1
 	  This panel can be found in Samsung Galaxy Ace 2
 	  GT-I8160 mobile phone.
 
+config DRM_PANEL_SAMSUNG_S6D7AA0
+	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6E3HA2
 	tristate "Samsung S6E3HA2 DSI video mode panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -54,6 +54,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_DB7430) += panel-samsung-db7430.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D27A1) += panel-samsung-s6d27a1.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0) += panel-samsung-s6d7aa0.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o