IB/mthca: Fix MAD extended header format for MAD_IFC firmware command

Several fields in an incoming MAD extended info header were passed
into the MAD_IFC firmware command at incorrect offsets (mostly off by
4 bytes).  As the result, the HCA will fail to generate traps in which
this info is needed (e.g. traps which include the GRH of the incoming
packet), in violation of the IB spec.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/mthca/mthca_cmd.c

@@ -1820,11 +1820,11 @@ int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
 
 #define MAD_IFC_BOX_SIZE      0x400
 #define MAD_IFC_MY_QPN_OFFSET 0x100
-#define MAD_IFC_RQPN_OFFSET   0x104
-#define MAD_IFC_SL_OFFSET     0x108
-#define MAD_IFC_G_PATH_OFFSET 0x109
-#define MAD_IFC_RLID_OFFSET   0x10a
-#define MAD_IFC_PKEY_OFFSET   0x10e
+#define MAD_IFC_RQPN_OFFSET   0x108
+#define MAD_IFC_SL_OFFSET     0x10c
+#define MAD_IFC_G_PATH_OFFSET 0x10d
+#define MAD_IFC_RLID_OFFSET   0x10e
+#define MAD_IFC_PKEY_OFFSET   0x112
 #define MAD_IFC_GRH_OFFSET    0x140
 
 	inmailbox = mthca_alloc_mailbox(dev, GFP_KERNEL);
@@ -1862,7 +1862,7 @@ int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
 
 		val = in_wc->dlid_path_bits |
 			(in_wc->wc_flags & IB_WC_GRH ? 0x80 : 0);
-		MTHCA_PUT(inbox, val,               MAD_IFC_GRH_OFFSET);
+		MTHCA_PUT(inbox, val,               MAD_IFC_G_PATH_OFFSET);
 
 		MTHCA_PUT(inbox, in_wc->slid,       MAD_IFC_RLID_OFFSET);
 		MTHCA_PUT(inbox, in_wc->pkey_index, MAD_IFC_PKEY_OFFSET);
@@ -1870,7 +1870,7 @@ int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
 		if (in_grh)
 			memcpy(inbox + MAD_IFC_GRH_OFFSET, in_grh, 40);
 
-		op_modifier |= 0x10;
+		op_modifier |= 0x4;
 
 		in_modifier |= in_wc->slid << 16;
 	}