net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs

Add a sysctl raw_l3mdev_accept to control raw socket lookup in a manner
similar to use of tcp_l3mdev_accept for stream and of udp_l3mdev_accept
for datagram sockets. Have this default to enabled for reasons of
backwards compatibility. This is so as to specify the output device
with cmsg and IP_PKTINFO, but using a socket not bound to the
corresponding VRF. This allows e.g. older ping implementations to be
run with specifying the device but without executing it in the VRF.
If the option is disabled, packets received in a VRF context are only
handled by a raw socket bound to the VRF, and correspondingly packets
in the default VRF are only handled by a socket not bound to any VRF.
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/ip-sysctl.txt

@@ -370,6 +370,7 @@ tcp_l3mdev_accept - BOOLEAN
 	derived from the listen socket to be bound to the L3 domain in
 	which the packets originated. Only valid when the kernel was
 	compiled with CONFIG_NET_L3_MASTER_DEV.
+        Default: 0 (disabled)
 
 tcp_low_latency - BOOLEAN
 	This is a legacy option, it has no effect anymore.
@@ -773,6 +774,7 @@ udp_l3mdev_accept - BOOLEAN
 	being received regardless of the L3 domain in which they
 	originated. Only valid when the kernel was compiled with
 	CONFIG_NET_L3_MASTER_DEV.
+        Default: 0 (disabled)
 
 udp_mem - vector of 3 INTEGERs: min, pressure, max
 	Number of pages allowed for queueing by all UDP sockets.
@@ -799,6 +801,16 @@ udp_wmem_min - INTEGER
 	total pages of UDP sockets exceed udp_mem pressure. The unit is byte.
 	Default: 4K
 
+RAW variables:
+
+raw_l3mdev_accept - BOOLEAN
+	Enabling this option allows a "global" bound socket to work
+	across L3 master domains (e.g., VRFs) with packets capable of
+	being received regardless of the L3 domain in which they
+	originated. Only valid when the kernel was compiled with
+	CONFIG_NET_L3_MASTER_DEV.
+	Default: 1 (enabled)
+
 CIPSOv4 Variables:
 
 cipso_cache_enable - BOOLEAN

Documentation/networking/vrf.txt

@@ -111,9 +111,22 @@ the same port if they bind to an l3mdev.
 TCP & UDP services running in the default VRF context (ie., not bound
 to any VRF device) can work across all VRF domains by enabling the
 tcp_l3mdev_accept and udp_l3mdev_accept sysctl options:
+
     sysctl -w net.ipv4.tcp_l3mdev_accept=1
     sysctl -w net.ipv4.udp_l3mdev_accept=1
 
+These options are disabled by default so that a socket in a VRF is only
+selected for packets in that VRF. There is a similar option for RAW
+sockets, which is enabled by default for reasons of backwards compatibility.
+This is so as to specify the output device with cmsg and IP_PKTINFO, but
+using a socket not bound to the corresponding VRF. This allows e.g. older ping
+implementations to be run with specifying the device but without executing it
+in the VRF. This option can be disabled so that packets received in a VRF
+context are only handled by a raw socket bound to the VRF, and packets in the
+default VRF are only handled by a socket not bound to any VRF:
+
+    sysctl -w net.ipv4.raw_l3mdev_accept=0
+
 netfilter rules on the VRF device can be used to limit access to services
 running in the default VRF context as well.
 

include/net/netns/ipv4.h

@@ -103,6 +103,9 @@ struct netns_ipv4 {
 	/* Shall we try to damage output packets if routing dev changes? */
 	int sysctl_ip_dynaddr;
 	int sysctl_ip_early_demux;
+#ifdef CONFIG_NET_L3_MASTER_DEV
+	int sysctl_raw_l3mdev_accept;
+#endif
 	int sysctl_tcp_early_demux;
 	int sysctl_udp_early_demux;
 

include/net/raw.h

@@ -61,6 +61,7 @@ void raw_seq_stop(struct seq_file *seq, void *v);
 
 int raw_hash_sk(struct sock *sk);
 void raw_unhash_sk(struct sock *sk);
+void raw_init(void);
 
 struct raw_sock {
 	/* inet_sock has to be the first member */

net/ipv4/af_inet.c

@@ -1964,6 +1964,8 @@ static int __init inet_init(void)
 	/* Add UDP-Lite (RFC 3828) */
 	udplite4_register();
 
+	raw_init();
+
 	ping_init();
 
 	/*

net/ipv4/raw.c

@@ -805,7 +805,7 @@ static int raw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
 	return copied;
 }
 
-static int raw_init(struct sock *sk)
+static int raw_sk_init(struct sock *sk)
 {
 	struct raw_sock *rp = raw_sk(sk);
 
@@ -970,7 +970,7 @@ struct proto raw_prot = {
 	.connect	   = ip4_datagram_connect,
 	.disconnect	   = __udp_disconnect,
 	.ioctl		   = raw_ioctl,
-	.init		   = raw_init,
+	.init		   = raw_sk_init,
 	.setsockopt	   = raw_setsockopt,
 	.getsockopt	   = raw_getsockopt,
 	.sendmsg	   = raw_sendmsg,
@@ -1133,4 +1133,28 @@ void __init raw_proc_exit(void)
 {
 	unregister_pernet_subsys(&raw_net_ops);
 }
+
+static void raw_sysctl_init_net(struct net *net)
+{
+#ifdef CONFIG_NET_L3_MASTER_DEV
+	net->ipv4.sysctl_raw_l3mdev_accept = 1;
+#endif
+}
+
+static int __net_init raw_sysctl_init(struct net *net)
+{
+	raw_sysctl_init_net(net);
+	return 0;
+}
+
+static struct pernet_operations __net_initdata raw_sysctl_ops = {
+	.init	= raw_sysctl_init,
+};
+
+void __init raw_init(void)
+{
+	raw_sysctl_init_net(&init_net);
+	if (register_pernet_subsys(&raw_sysctl_ops))
+		panic("RAW: failed to init sysctl parameters.\n");
+}
 #endif /* CONFIG_PROC_FS */

net/ipv4/sysctl_net_ipv4.c

@@ -602,6 +602,17 @@ static struct ctl_table ipv4_net_table[] = {
 		.mode		= 0644,
 		.proc_handler	= ipv4_ping_group_range,
 	},
+#ifdef CONFIG_NET_L3_MASTER_DEV
+	{
+		.procname	= "raw_l3mdev_accept",
+		.data		= &init_net.ipv4.sysctl_raw_l3mdev_accept,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
+#endif
 	{
 		.procname	= "tcp_ecn",
 		.data		= &init_net.ipv4.sysctl_tcp_ecn,