mfd: axp20x: AXP717: Fix missing IRQ status registers range

While we list the "IRQ status *and acknowledge*" registers as volatile
in the MFD description, they are missing from the writable range array,
so acknowledging any interrupts was met with an -EIO error.
This error propagates up, leading to the whole AXP717 driver failing to
probe, which is fatal to most systems using this PMIC, since most
peripherals refer one of the PMIC voltage rails.
This wasn't noticed on the initial submission, since the interrupt was
completely missing at this point, but the DTs now merged describe the
interrupt, creating the problem.

Add the five registers that hold those bits to the writable array.

This fixes the boot on the Anbernic systems using the AXP717 PMIC.

Fixes: b5bfc8ab ("mfd: axp20x: Add support for AXP717 PMIC")
Reported-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240613233104.17529-1-andre.przywara@arm.comSigned-off-by: Lee Jones <lee@kernel.org>

drivers/mfd/axp20x.c

@@ -210,6 +210,7 @@ static const struct regmap_access_table axp313a_volatile_table = {
 
 static const struct regmap_range axp717_writeable_ranges[] = {
 	regmap_reg_range(AXP717_IRQ0_EN, AXP717_IRQ4_EN),
+	regmap_reg_range(AXP717_IRQ0_STATE, AXP717_IRQ4_STATE),
 	regmap_reg_range(AXP717_DCDC_OUTPUT_CONTROL, AXP717_CPUSLDO_CONTROL),
 };