Commit 69bfbec4 authored by Greg Rose's avatar Greg Rose Committed by Jeff Kirsher

ixgbevf: Enable jumbo frame support for X540 VF

The X540 controller allows jumbo frame setup on a per VF basis.  Enable
use of jumbo frames when the VF device belongs to the X540 controller.
Signed-off-by: default avatarGreg Rose <gregory.v.rose@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent e9f98072
......@@ -65,6 +65,8 @@ typedef u32 ixgbe_link_speed;
#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
#define IXGBE_RXDCTL_RLPML_EN 0x00008000
/* DCA Control */
#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
......
......@@ -51,7 +51,7 @@ char ixgbevf_driver_name[] = "ixgbevf";
static const char ixgbevf_driver_string[] =
"Intel(R) 82599 Virtual Function";
#define DRV_VERSION "1.0.19-k0"
#define DRV_VERSION "1.1.0-k0"
const char ixgbevf_driver_version[] = DRV_VERSION;
static char ixgbevf_copyright[] =
"Copyright (c) 2009 - 2010 Intel Corporation.";
......@@ -1665,6 +1665,11 @@ static int ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
j = adapter->rx_ring[i].reg_idx;
rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j));
rxdctl |= IXGBE_RXDCTL_ENABLE;
if (hw->mac.type == ixgbe_mac_X540_vf) {
rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK;
rxdctl |= ((netdev->mtu + ETH_HLEN + ETH_FCS_LEN) |
IXGBE_RXDCTL_RLPML_EN);
}
IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(j), rxdctl);
ixgbevf_rx_desc_queue_enable(adapter, i);
}
......@@ -3217,10 +3222,16 @@ static int ixgbevf_set_mac(struct net_device *netdev, void *p)
static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
{
struct ixgbevf_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
int max_possible_frame = MAXIMUM_ETHERNET_VLAN_SIZE;
u32 msg[2];
if (adapter->hw.mac.type == ixgbe_mac_X540_vf)
max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
/* MTU < 68 is an error and causes problems on some kernels */
if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE))
if ((new_mtu < 68) || (max_frame > max_possible_frame))
return -EINVAL;
hw_dbg(&adapter->hw, "changing MTU from %d to %d\n",
......@@ -3228,6 +3239,10 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
/* must set new MTU before calling down or up */
netdev->mtu = new_mtu;
msg[0] = IXGBE_VF_SET_LPE;
msg[1] = max_frame;
hw->mbx.ops.write_posted(hw, msg, 2);
if (netif_running(netdev))
ixgbevf_reinit_locked(adapter);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment