Commit 6a36690a authored by Mark Brown's avatar Mark Brown

ASoC: SOF: ipc4: upport multiple configs for BE DAIs

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

Backend DAIs may support multiple audio formats. Modify pipeline setup to select
a suitable configuration based on topology and frontend DAI runtime configuration.

The prime use case is BT offload support where we need the abality to select
different configuration on the BE side.
parents 47df94fa 37ec7ab4
......@@ -362,15 +362,68 @@ static void ipc4_ssp_dai_config_pcm_params_match(struct snd_sof_dev *sdev, const
}
}
/*
* Fixup DAI link parameters for sampling rate based on
* DAI copier configuration.
*/
static int sof_ipc4_pcm_dai_link_fixup_rate(struct snd_sof_dev *sdev,
struct snd_pcm_hw_params *params,
struct sof_ipc4_copier *ipc4_copier)
{
struct sof_ipc4_pin_format *pin_fmts = ipc4_copier->available_fmt.input_pin_fmts;
struct snd_interval *rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
int num_input_formats = ipc4_copier->available_fmt.num_input_formats;
unsigned int fe_rate = params_rate(params);
bool fe_be_rate_match = false;
bool single_be_rate = true;
unsigned int be_rate;
int i;
/*
* Copier does not change sampling rate, so we
* need to only consider the input pin information.
*/
for (i = 0; i < num_input_formats; i++) {
unsigned int val = pin_fmts[i].audio_fmt.sampling_frequency;
if (i == 0)
be_rate = val;
else if (val != be_rate)
single_be_rate = false;
if (val == fe_rate) {
fe_be_rate_match = true;
break;
}
}
/*
* If rate is different than FE rate, topology must
* contain an SRC. But we do require topology to
* define a single rate in the DAI copier config in
* this case (FE rate may be variable).
*/
if (!fe_be_rate_match) {
if (!single_be_rate) {
dev_err(sdev->dev, "Unable to select sampling rate for DAI link\n");
return -EINVAL;
}
rate->min = be_rate;
rate->max = rate->min;
}
return 0;
}
static int sof_ipc4_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd,
struct snd_pcm_hw_params *params)
{
struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, SOF_AUDIO_PCM_DRV_NAME);
struct snd_sof_dai *dai = snd_sof_find_dai(component, rtd->dai_link->name);
struct snd_interval *rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
struct snd_sof_dev *sdev = snd_soc_component_get_drvdata(component);
struct sof_ipc4_copier *ipc4_copier;
int ret;
if (!dai) {
dev_err(component->dev, "%s: No DAI found with name %s\n", __func__,
......@@ -385,12 +438,9 @@ static int sof_ipc4_pcm_dai_link_fixup(struct snd_soc_pcm_runtime *rtd,
return -EINVAL;
}
/* always set BE format to 32-bits for both playback and capture */
snd_mask_none(fmt);
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S32_LE);
rate->min = ipc4_copier->available_fmt.input_pin_fmts->audio_fmt.sampling_frequency;
rate->max = rate->min;
ret = sof_ipc4_pcm_dai_link_fixup_rate(sdev, params, ipc4_copier);
if (ret)
return ret;
switch (ipc4_copier->dai_type) {
case SOF_DAI_INTEL_SSP:
......
......@@ -1070,6 +1070,69 @@ static int snd_sof_get_nhlt_endpoint_data(struct snd_sof_dev *sdev, struct snd_s
}
#endif
static int ipc4_set_fmt_mask(struct snd_mask *fmt, unsigned int bit_depth)
{
switch (bit_depth) {
case 16:
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE);
break;
case 24:
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
break;
case 32:
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S32_LE);
break;
default:
return -EINVAL;
}
return 0;
}
static int ipc4_copier_set_capture_fmt(struct snd_sof_dev *sdev,
struct snd_pcm_hw_params *pipeline_params,
struct snd_pcm_hw_params *fe_params,
struct sof_ipc4_available_audio_format *available_fmt)
{
struct sof_ipc4_audio_format *audio_fmt;
unsigned int sample_valid_bits;
bool multiple_formats = false;
bool fe_format_match = false;
struct snd_mask *fmt;
int i;
for (i = 0; i < available_fmt->num_output_formats; i++) {
unsigned int val;
audio_fmt = &available_fmt->output_pin_fmts[i].audio_fmt;
val = SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(audio_fmt->fmt_cfg);
if (i == 0)
sample_valid_bits = val;
else if (sample_valid_bits != val)
multiple_formats = true;
if (snd_pcm_format_width(params_format(fe_params)) == val)
fe_format_match = true;
}
fmt = hw_param_mask(pipeline_params, SNDRV_PCM_HW_PARAM_FORMAT);
snd_mask_none(fmt);
if (multiple_formats) {
if (fe_format_match) {
/* multiple formats defined and one matches FE */
snd_mask_set_format(fmt, params_format(fe_params));
return 0;
}
dev_err(sdev->dev, "Multiple audio formats for single dai_out not supported\n");
return -EINVAL;
}
return ipc4_set_fmt_mask(fmt, sample_valid_bits);
}
static int
sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
struct snd_pcm_hw_params *fe_params,
......@@ -1153,13 +1216,10 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
format_list_to_search = available_fmt->output_pin_fmts;
format_list_count = available_fmt->num_output_formats;
/*
* modify the input params for the dai copier as it only supports
* 32-bit always
*/
fmt = hw_param_mask(pipeline_params, SNDRV_PCM_HW_PARAM_FORMAT);
snd_mask_none(fmt);
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S32_LE);
ret = ipc4_copier_set_capture_fmt(sdev, pipeline_params, fe_params,
available_fmt);
if (ret < 0)
return ret;
} else {
format_list_to_search = available_fmt->input_pin_fmts;
format_list_count = available_fmt->num_input_formats;
......@@ -1304,21 +1364,9 @@ sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
out_sample_valid_bits =
SOF_IPC4_AUDIO_FORMAT_CFG_V_BIT_DEPTH(copier_data->out_format.fmt_cfg);
snd_mask_none(fmt);
switch (out_sample_valid_bits) {
case 16:
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE);
break;
case 24:
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
break;
case 32:
snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S32_LE);
break;
default:
dev_err(sdev->dev, "invalid sample frame format %d\n",
params_format(pipeline_params));
return -EINVAL;
}
ret = ipc4_set_fmt_mask(fmt, out_sample_valid_bits);
if (ret)
return ret;
/*
* Set the gateway dma_buffer_size to 2ms buffer size to meet the FW expectation. In the
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment