Commit 6afe1a1f authored by Pavel Machek's avatar Pavel Machek Committed by Len Brown

PM: Remove legacy PM

AFAICT pm_send_all is a nop when noone uses pm_register...

Hmm.. can we just force CONFIG_PM_LEGACY=n, and see what happens?

Or maybe this is better idea? It may break build somewhere, but it
should be easy to fix... (it builds here, i386 and x86-64).
Signed-off-by: default avatarPavel Machek <pavel@suse.cz>
Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent a985aabe
......@@ -163,14 +163,11 @@ static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
if ((mode != 1) && (mode != 5))
return -EINVAL;
retval = pm_send_all(PM_SUSPEND, (void *)3);
if (retval == 0) {
if (mode == 5)
retval = pm_do_bus_sleep();
else
retval = pm_do_suspend();
pm_send_all(PM_RESUME, (void *)0);
}
return retval;
......@@ -183,9 +180,6 @@ static int try_set_cmode(int new_cmode)
if (!(clock_cmodes_permitted & (1<<new_cmode)))
return -EINVAL;
/* tell all the drivers we're suspending */
pm_send_all(PM_SUSPEND, (void *)3);
/* now change cmode */
local_irq_disable();
frv_dma_pause_all();
......@@ -201,8 +195,6 @@ static int try_set_cmode(int new_cmode)
frv_dma_resume_all();
local_irq_enable();
/* tell all the drivers we're resuming */
pm_send_all(PM_RESUME, (void *)0);
return 0;
}
......
......@@ -258,7 +258,6 @@ int au_sleep(void)
static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0;
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
......@@ -278,33 +277,21 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
#endif
retval = pm_send_all(PM_SUSPEND, (void *) 2);
if (retval)
return retval;
au_sleep();
retval = pm_send_all(PM_RESUME, (void *) 0);
}
return retval;
return 0;
}
static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
void __user *buffer, size_t * len, loff_t *ppos)
{
int retval = 0;
if (!write) {
*len = 0;
} else {
retval = pm_send_all(PM_SUSPEND, (void *) 2);
if (retval)
return retval;
suspend_mode = 1;
retval = pm_send_all(PM_RESUME, (void *) 0);
}
return retval;
return 0;
}
......
......@@ -1189,19 +1189,6 @@ static int suspend(int vetoable)
int err;
struct apm_user *as;
if (pm_send_all(PM_SUSPEND, (void *)3)) {
/* Vetoed */
if (vetoable) {
if (apm_info.connection_version > 0x100)
set_system_power_state(APM_STATE_REJECT);
err = -EBUSY;
ignore_sys_suspend = 0;
printk(KERN_WARNING "apm: suspend was vetoed.\n");
goto out;
}
printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
}
device_suspend(PMSG_SUSPEND);
local_irq_disable();
device_power_down(PMSG_SUSPEND);
......@@ -1224,7 +1211,6 @@ static int suspend(int vetoable)
device_power_up();
local_irq_enable();
device_resume();
pm_send_all(PM_RESUME, (void *)0);
queue_event(APM_NORMAL_RESUME, NULL);
out:
spin_lock(&user_list_lock);
......@@ -1337,7 +1323,6 @@ static void check_events(void)
if ((event != APM_NORMAL_RESUME)
|| (ignore_normal_resume == 0)) {
device_resume();
pm_send_all(PM_RESUME, (void *)0);
queue_event(event, NULL);
}
ignore_normal_resume = 0;
......
......@@ -19,16 +19,6 @@ config PM
will issue the hlt instruction if nothing is to be done, thereby
sending the processor to sleep and saving power.
config PM_LEGACY
bool "Legacy Power Management API (DEPRECATED)"
depends on PM
default n
---help---
Support for pm_register() and friends. This old API is obsoleted
by the driver model.
If unsure, say N.
config PM_DEBUG
bool "Power Management Debug Support"
depends on PM
......
......@@ -4,7 +4,6 @@ EXTRA_CFLAGS += -DDEBUG
endif
obj-y := main.o
obj-$(CONFIG_PM_LEGACY) += pm.o
obj-$(CONFIG_PM_SLEEP) += process.o console.o
obj-$(CONFIG_HIBERNATION) += swsusp.o disk.o snapshot.o swap.o user.o
......
/*
* pm.c - Power management interface
*
* Copyright (C) 2000 Andrew Henroid
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/pm_legacy.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
/*
* Locking notes:
* pm_devs_lock can be a semaphore providing pm ops are not called
* from an interrupt handler (already a bad idea so no change here). Each
* change must be protected so that an unlink of an entry doesn't clash
* with a pm send - which is permitted to sleep in the current architecture
*
* Module unloads clashing with pm events now work out safely, the module
* unload path will block until the event has been sent. It may well block
* until a resume but that will be fine.
*/
static DEFINE_MUTEX(pm_devs_lock);
static LIST_HEAD(pm_devs);
/**
* pm_register - register a device with power management
* @type: device type
* @id: device ID
* @callback: callback function
*
* Add a device to the list of devices that wish to be notified about
* power management events. A &pm_dev structure is returned on success,
* on failure the return is %NULL.
*
* The callback function will be called in process context and
* it may sleep.
*/
struct pm_dev *pm_register(pm_dev_t type,
unsigned long id,
pm_callback callback)
{
struct pm_dev *dev = kzalloc(sizeof(struct pm_dev), GFP_KERNEL);
if (dev) {
dev->type = type;
dev->id = id;
dev->callback = callback;
mutex_lock(&pm_devs_lock);
list_add(&dev->entry, &pm_devs);
mutex_unlock(&pm_devs_lock);
}
return dev;
}
/**
* pm_send - send request to a single device
* @dev: device to send to
* @rqst: power management request
* @data: data for the callback
*
* Issue a power management request to a given device. The
* %PM_SUSPEND and %PM_RESUME events are handled specially. The
* data field must hold the intended next state. No call is made
* if the state matches.
*
* BUGS: what stops two power management requests occurring in parallel
* and conflicting.
*
* WARNING: Calling pm_send directly is not generally recommended, in
* particular there is no locking against the pm_dev going away. The
* caller must maintain all needed locking or have 'inside knowledge'
* on the safety. Also remember that this function is not locked against
* pm_unregister. This means that you must handle SMP races on callback
* execution and unload yourself.
*/
static int pm_send(struct pm_dev *dev, pm_request_t rqst, void *data)
{
int status = 0;
unsigned long prev_state, next_state;
if (in_interrupt())
BUG();
switch (rqst) {
case PM_SUSPEND:
case PM_RESUME:
prev_state = dev->state;
next_state = (unsigned long) data;
if (prev_state != next_state) {
if (dev->callback)
status = (*dev->callback)(dev, rqst, data);
if (!status) {
dev->state = next_state;
dev->prev_state = prev_state;
}
}
else {
dev->prev_state = prev_state;
}
break;
default:
if (dev->callback)
status = (*dev->callback)(dev, rqst, data);
break;
}
return status;
}
/*
* Undo incomplete request
*/
static void pm_undo_all(struct pm_dev *last)
{
struct list_head *entry = last->entry.prev;
while (entry != &pm_devs) {
struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
if (dev->state != dev->prev_state) {
/* previous state was zero (running) resume or
* previous state was non-zero (suspended) suspend
*/
pm_request_t undo = (dev->prev_state
? PM_SUSPEND:PM_RESUME);
pm_send(dev, undo, (void*) dev->prev_state);
}
entry = entry->prev;
}
}
/**
* pm_send_all - send request to all managed devices
* @rqst: power management request
* @data: data for the callback
*
* Issue a power management request to a all devices. The
* %PM_SUSPEND events are handled specially. Any device is
* permitted to fail a suspend by returning a non zero (error)
* value from its callback function. If any device vetoes a
* suspend request then all other devices that have suspended
* during the processing of this request are restored to their
* previous state.
*
* WARNING: This function takes the pm_devs_lock. The lock is not dropped until
* the callbacks have completed. This prevents races against pm locking
* functions, races against module unload pm_unregister code. It does
* mean however that you must not issue pm_ functions within the callback
* or you will deadlock and users will hate you.
*
* Zero is returned on success. If a suspend fails then the status
* from the device that vetoes the suspend is returned.
*
* BUGS: what stops two power management requests occurring in parallel
* and conflicting.
*/
int pm_send_all(pm_request_t rqst, void *data)
{
struct list_head *entry;
mutex_lock(&pm_devs_lock);
entry = pm_devs.next;
while (entry != &pm_devs) {
struct pm_dev *dev = list_entry(entry, struct pm_dev, entry);
if (dev->callback) {
int status = pm_send(dev, rqst, data);
if (status) {
/* return devices to previous state on
* failed suspend request
*/
if (rqst == PM_SUSPEND)
pm_undo_all(dev);
mutex_unlock(&pm_devs_lock);
return status;
}
}
entry = entry->next;
}
mutex_unlock(&pm_devs_lock);
return 0;
}
EXPORT_SYMBOL(pm_register);
EXPORT_SYMBOL(pm_send_all);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment