Skip to content

L
linux
Commit 6b1e989e authored by Bjorn Helgaas's avatar Bjorn Helgaas
Browse files
Options

PCI: imx6: Move PHY management functions together 

Collect imx6_pcie_init_phy(), imx7d_pcie_wait_for_phy_pll_lock(), and
imx6_setup_phy_mpll() earlier with other PHY-related code.  No functional
change intended.

Link: https://lore.kernel.org/r/1657783869-19194-3-git-send-email-hongxing.zhu@nxp.comSigned-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarLucas Stach <l.stach@pengutronix.de>
Acked-by: default avatarRichard Zhu <hongxing.zhu@nxp.com>
parent 79f14b6f
Hide whitespace changes
Inline Side-by-side
Showing with 128 additions and 128 deletions
drivers/pci/controller/dwc/pci-imx6.c
View file @ 6b1e989e
......@@ -296,6 +296,134 @@ static int pcie_phy_write(struct imx6_pcie *imx6_pcie, int addr, u16 data)
return 0;
}
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
case IMX8MM:
/*
* The PHY initialization had been done in the PHY
* driver, break here directly.
*/
break;
case IMX8MQ:
/*
* TODO: Currently this code assumes external
* oscillator is being used
*/
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_REF_USE_PAD,
IMX8MQ_GPR_PCIE_REF_USE_PAD);
/*
* Regarding the datasheet, the PCIE_VPH is suggested
* to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
* VREG_BYPASS should be cleared to zero.
*/
if (imx6_pcie->vph &&
regulator_get_voltage(imx6_pcie->vph) > 3000000)
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_VREG_BYPASS,
0);
break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
break;
case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
IMX6SX_GPR12_PCIE_RX_EQ_2);
fallthrough;
default:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
/* configure constant input signal to the pcie ctrl and phy */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN1,
imx6_pcie->tx_deemph_gen1 << 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
imx6_pcie->tx_deemph_gen2_3p5db << 6);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
imx6_pcie->tx_deemph_gen2_6db << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_FULL,
imx6_pcie->tx_swing_full << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_LOW,
imx6_pcie->tx_swing_low << 25);
break;
}
imx6_pcie_configure_type(imx6_pcie);
}
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
{
u32 val;
struct device *dev = imx6_pcie->pci->dev;
if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
IOMUXC_GPR22, val,
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
PHY_PLL_LOCK_WAIT_TIMEOUT))
dev_err(dev, "PCIe PLL lock timeout\n");
}
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
{
unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
int mult, div;
u16 val;
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
return 0;
switch (phy_rate) {
case 125000000:
/*
* The default settings of the MPLL are for a 125MHz input
* clock, so no need to reconfigure anything in that case.
*/
return 0;
case 100000000:
mult = 25;
div = 0;
break;
case 200000000:
mult = 25;
div = 1;
break;
default:
dev_err(imx6_pcie->pci->dev,
"Unsupported PHY reference clock rate %lu\n", phy_rate);
return -EINVAL;
}
pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
val |= PCIE_PHY_ATEOVRD_EN;
pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
return 0;
}
static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie)
{
u16 tmp;
......@@ -500,19 +628,6 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
return ret;
}
static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
{
u32 val;
struct device *dev = imx6_pcie->pci->dev;
if (regmap_read_poll_timeout(imx6_pcie->iomuxc_gpr,
IOMUXC_GPR22, val,
val & IMX7D_GPR22_PCIE_PHY_PLL_LOCKED,
PHY_PLL_LOCK_WAIT_USLEEP_MAX,
PHY_PLL_LOCK_WAIT_TIMEOUT))
dev_err(dev, "PCIe PLL lock timeout\n");
}
static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
......@@ -635,121 +750,6 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
}
}
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
case IMX8MM:
/*
* The PHY initialization had been done in the PHY
* driver, break here directly.
*/
break;
case IMX8MQ:
/*
* TODO: Currently this code assumes external
* oscillator is being used
*/
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_REF_USE_PAD,
IMX8MQ_GPR_PCIE_REF_USE_PAD);
/*
* Regarding the datasheet, the PCIE_VPH is suggested
* to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
* VREG_BYPASS should be cleared to zero.
*/
if (imx6_pcie->vph &&
regulator_get_voltage(imx6_pcie->vph) > 3000000)
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_VREG_BYPASS,
0);
break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
break;
case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6SX_GPR12_PCIE_RX_EQ_MASK,
IMX6SX_GPR12_PCIE_RX_EQ_2);
fallthrough;
default:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
/* configure constant input signal to the pcie ctrl and phy */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN1,
imx6_pcie->tx_deemph_gen1 << 0);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
imx6_pcie->tx_deemph_gen2_3p5db << 6);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
imx6_pcie->tx_deemph_gen2_6db << 12);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_FULL,
imx6_pcie->tx_swing_full << 18);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
IMX6Q_GPR8_TX_SWING_LOW,
imx6_pcie->tx_swing_low << 25);
break;
}
imx6_pcie_configure_type(imx6_pcie);
}
static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie)
{
unsigned long phy_rate = clk_get_rate(imx6_pcie->pcie_phy);
int mult, div;
u16 val;
if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY))
return 0;
switch (phy_rate) {
case 125000000:
/*
* The default settings of the MPLL are for a 125MHz input
* clock, so no need to reconfigure anything in that case.
*/
return 0;
case 100000000:
mult = 25;
div = 0;
break;
case 200000000:
mult = 25;
div = 1;
break;
default:
dev_err(imx6_pcie->pci->dev,
"Unsupported PHY reference clock rate %lu\n", phy_rate);
return -EINVAL;
}
pcie_phy_read(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, &val);
val &= ~(PCIE_PHY_MPLL_MULTIPLIER_MASK <<
PCIE_PHY_MPLL_MULTIPLIER_SHIFT);
val |= mult << PCIE_PHY_MPLL_MULTIPLIER_SHIFT;
val |= PCIE_PHY_MPLL_MULTIPLIER_OVRD;
pcie_phy_write(imx6_pcie, PCIE_PHY_MPLL_OVRD_IN_LO, val);
pcie_phy_read(imx6_pcie, PCIE_PHY_ATEOVRD, &val);
val &= ~(PCIE_PHY_ATEOVRD_REF_CLKDIV_MASK <<
PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT);
val |= div << PCIE_PHY_ATEOVRD_REF_CLKDIV_SHIFT;
val |= PCIE_PHY_ATEOVRD_EN;
pcie_phy_write(imx6_pcie, PCIE_PHY_ATEOVRD, val);
return 0;
}
static int imx6_pcie_wait_for_speed_change(struct imx6_pcie *imx6_pcie)
{
struct dw_pcie *pci = imx6_pcie->pci;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7