net: hns3: fix reset timeout when enable full VF

The timeout of the cmdq reset command has been increased to
resolve the reset timeout issue in the full VF scenario.
The timeout of other cmdq commands remains unchanged.

Fixes: 8d307f8e ("net: hns3: create new set of unified hclge_comm_cmd_send APIs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.c

@@ -331,9 +331,25 @@ static int hclge_comm_cmd_csq_done(struct hclge_comm_hw *hw)
 	return head == hw->cmq.csq.next_to_use;
 }
 
-static void hclge_comm_wait_for_resp(struct hclge_comm_hw *hw,
+static u32 hclge_get_cmdq_tx_timeout(u16 opcode, u32 tx_timeout)
+{
+	static const struct hclge_cmdq_tx_timeout_map cmdq_tx_timeout_map[] = {
+		{HCLGE_OPC_CFG_RST_TRIGGER, HCLGE_COMM_CMDQ_TX_TIMEOUT_500MS},
+	};
+	u32 i;
+
+	for (i = 0; i < ARRAY_SIZE(cmdq_tx_timeout_map); i++)
+		if (cmdq_tx_timeout_map[i].opcode == opcode)
+			return cmdq_tx_timeout_map[i].tx_timeout;
+
+	return tx_timeout;
+}
+
+static void hclge_comm_wait_for_resp(struct hclge_comm_hw *hw, u16 opcode,
 				     bool *is_completed)
 {
+	u32 cmdq_tx_timeout = hclge_get_cmdq_tx_timeout(opcode,
+							hw->cmq.tx_timeout);
 	u32 timeout = 0;
 
 	do {
@@ -343,7 +359,7 @@ static void hclge_comm_wait_for_resp(struct hclge_comm_hw *hw,
 		}
 		udelay(1);
 		timeout++;
-	} while (timeout < hw->cmq.tx_timeout);
+	} while (timeout < cmdq_tx_timeout);
 }
 
 static int hclge_comm_cmd_convert_err_code(u16 desc_ret)
@@ -407,7 +423,8 @@ static int hclge_comm_cmd_check_result(struct hclge_comm_hw *hw,
 	 * if multi descriptors to be sent, use the first one to check
 	 */
 	if (HCLGE_COMM_SEND_SYNC(le16_to_cpu(desc->flag)))
-		hclge_comm_wait_for_resp(hw, &is_completed);
+		hclge_comm_wait_for_resp(hw, le16_to_cpu(desc->opcode),
+					 &is_completed);
 
 	if (!is_completed)
 		ret = -EBADE;
@@ -529,7 +546,7 @@ int hclge_comm_cmd_queue_init(struct pci_dev *pdev, struct hclge_comm_hw *hw)
 	cmdq->crq.desc_num = HCLGE_COMM_NIC_CMQ_DESC_NUM;
 
 	/* Setup Tx write back timeout */
-	cmdq->tx_timeout = HCLGE_COMM_CMDQ_TX_TIMEOUT;
+	cmdq->tx_timeout = HCLGE_COMM_CMDQ_TX_TIMEOUT_DEFAULT;
 
 	/* Setup queue rings */
 	ret = hclge_comm_alloc_cmd_queue(hw, HCLGE_COMM_TYPE_CSQ);

drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_cmd.h

@@ -54,7 +54,8 @@
 #define HCLGE_COMM_NIC_SW_RST_RDY		BIT(HCLGE_COMM_NIC_SW_RST_RDY_B)
 #define HCLGE_COMM_NIC_CMQ_DESC_NUM_S		3
 #define HCLGE_COMM_NIC_CMQ_DESC_NUM		1024
-#define HCLGE_COMM_CMDQ_TX_TIMEOUT		30000
+#define HCLGE_COMM_CMDQ_TX_TIMEOUT_DEFAULT	30000
+#define HCLGE_COMM_CMDQ_TX_TIMEOUT_500MS	500000
 
 enum hclge_opcode_type {
 	/* Generic commands */
@@ -360,6 +361,11 @@ struct hclge_comm_caps_bit_map {
 	u16 local_bit;
 };
 
+struct hclge_cmdq_tx_timeout_map {
+	u32 opcode;
+	u32 tx_timeout;
+};
+
 struct hclge_comm_firmware_compat_cmd {
 	__le32 compat;
 	u8 rsv[20];