Commit 6ba46c7d authored by Gary R Hook's avatar Gary R Hook Committed by Herbert Xu

crypto: ccp - Fix base RSA function for version 5 CCPs

Version 5 devices have requirements for buffer lengths, as well as
parameter format (e.g. bits vs. bytes). Fix the base CCP driver
code to meet requirements all supported versions.
Signed-off-by: default avatarGary R Hook <gary.hook@amd.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 68cc652f
......@@ -469,7 +469,7 @@ static int ccp5_perform_rsa(struct ccp_op *op)
CCP5_CMD_PROT(&desc) = 0;
function.raw = 0;
CCP_RSA_SIZE(&function) = op->u.rsa.mod_size >> 3;
CCP_RSA_SIZE(&function) = (op->u.rsa.mod_size + 7) >> 3;
CCP5_CMD_FUNCTION(&desc) = function.raw;
CCP5_CMD_LEN(&desc) = op->u.rsa.input_len;
......@@ -484,10 +484,10 @@ static int ccp5_perform_rsa(struct ccp_op *op)
CCP5_CMD_DST_HI(&desc) = ccp_addr_hi(&op->dst.u.dma);
CCP5_CMD_DST_MEM(&desc) = CCP_MEMTYPE_SYSTEM;
/* Exponent is in LSB memory */
CCP5_CMD_KEY_LO(&desc) = op->sb_key * LSB_ITEM_SIZE;
CCP5_CMD_KEY_HI(&desc) = 0;
CCP5_CMD_KEY_MEM(&desc) = CCP_MEMTYPE_SB;
/* Key (Exponent) is in external memory */
CCP5_CMD_KEY_LO(&desc) = ccp_addr_lo(&op->exp.u.dma);
CCP5_CMD_KEY_HI(&desc) = ccp_addr_hi(&op->exp.u.dma);
CCP5_CMD_KEY_MEM(&desc) = CCP_MEMTYPE_SYSTEM;
return ccp5_do_cmd(&desc, op->cmd_q);
}
......
......@@ -1731,8 +1731,7 @@ static int ccp_run_sha_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
{
struct ccp_rsa_engine *rsa = &cmd->u.rsa;
struct ccp_dm_workarea exp, src;
struct ccp_data dst;
struct ccp_dm_workarea exp, src, dst;
struct ccp_op op;
unsigned int sb_count, i_len, o_len;
int ret;
......@@ -1743,30 +1742,40 @@ static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
if (!rsa->exp || !rsa->mod || !rsa->src || !rsa->dst)
return -EINVAL;
memset(&op, 0, sizeof(op));
op.cmd_q = cmd_q;
op.jobid = CCP_NEW_JOBID(cmd_q->ccp);
/* The RSA modulus must precede the message being acted upon, so
* it must be copied to a DMA area where the message and the
* modulus can be concatenated. Therefore the input buffer
* length required is twice the output buffer length (which
* must be a multiple of 256-bits).
* must be a multiple of 256-bits). Compute o_len, i_len in bytes.
* Buffer sizes must be a multiple of 32 bytes; rounding up may be
* required.
*/
o_len = ((rsa->key_size + 255) / 256) * 32;
o_len = 32 * ((rsa->key_size + 255) / 256);
i_len = o_len * 2;
if (cmd_q->ccp->vdata->version < CCP_VERSION(5, 0)) {
/* sb_count is the number of storage block slots required
* for the modulus.
*/
sb_count = o_len / CCP_SB_BYTES;
memset(&op, 0, sizeof(op));
op.cmd_q = cmd_q;
op.jobid = CCP_NEW_JOBID(cmd_q->ccp);
op.sb_key = cmd_q->ccp->vdata->perform->sballoc(cmd_q, sb_count);
op.sb_key = cmd_q->ccp->vdata->perform->sballoc(cmd_q,
sb_count);
if (!op.sb_key)
return -EIO;
} else {
/* A version 5 device allows a modulus size that will not fit
* in the LSB, so the command will transfer it from memory.
* Set the sb key to the default, even though it's not used.
*/
op.sb_key = cmd_q->sb_key;
}
/* The RSA exponent may span multiple (32-byte) SB entries and must
* be in little endian format. Reverse copy each 32-byte chunk
* of the exponent (En chunk to E0 chunk, E(n-1) chunk to E1 chunk)
* and each byte within that chunk and do not perform any byte swap
* operations on the passthru operation.
/* The RSA exponent must be in little endian format. Reverse its
* byte order.
*/
ret = ccp_init_dm_workarea(&exp, cmd_q, o_len, DMA_TO_DEVICE);
if (ret)
......@@ -1775,12 +1784,23 @@ static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
ret = ccp_reverse_set_dm_area(&exp, 0, rsa->exp, 0, rsa->exp_len);
if (ret)
goto e_exp;
if (cmd_q->ccp->vdata->version < CCP_VERSION(5, 0)) {
/* Copy the exponent to the local storage block, using
* as many 32-byte blocks as were allocated above. It's
* already little endian, so no further change is required.
*/
ret = ccp_copy_to_sb(cmd_q, &exp, op.jobid, op.sb_key,
CCP_PASSTHRU_BYTESWAP_NOOP);
if (ret) {
cmd->engine_error = cmd_q->cmd_error;
goto e_exp;
}
} else {
/* The exponent can be retrieved from memory via DMA. */
op.exp.u.dma.address = exp.dma.address;
op.exp.u.dma.offset = 0;
}
/* Concatenate the modulus and the message. Both the modulus and
* the operands must be in little endian format. Since the input
......@@ -1798,8 +1818,7 @@ static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
goto e_src;
/* Prepare the output area for the operation */
ret = ccp_init_data(&dst, cmd_q, rsa->dst, rsa->mod_len,
o_len, DMA_FROM_DEVICE);
ret = ccp_init_dm_workarea(&dst, cmd_q, o_len, DMA_FROM_DEVICE);
if (ret)
goto e_src;
......@@ -1807,7 +1826,7 @@ static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
op.src.u.dma.address = src.dma.address;
op.src.u.dma.offset = 0;
op.src.u.dma.length = i_len;
op.dst.u.dma.address = dst.dm_wa.dma.address;
op.dst.u.dma.address = dst.dma.address;
op.dst.u.dma.offset = 0;
op.dst.u.dma.length = o_len;
......@@ -1820,10 +1839,10 @@ static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
goto e_dst;
}
ccp_reverse_get_dm_area(&dst.dm_wa, 0, rsa->dst, 0, rsa->mod_len);
ccp_reverse_get_dm_area(&dst, 0, rsa->dst, 0, rsa->mod_len);
e_dst:
ccp_free_data(&dst, cmd_q);
ccp_dm_free(&dst);
e_src:
ccp_dm_free(&src);
......@@ -1832,6 +1851,7 @@ static int ccp_run_rsa_cmd(struct ccp_cmd_queue *cmd_q, struct ccp_cmd *cmd)
ccp_dm_free(&exp);
e_sb:
if (cmd_q->ccp->vdata->version < CCP_VERSION(5, 0))
cmd_q->ccp->vdata->perform->sbfree(cmd_q, op.sb_key, sb_count);
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment