Merge tag 'blackfin-for-linus' of...

Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao:
 "Blackfin gpio changes, add adi pinctrl driver, and bug fixes"

* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  blackfin: fix build warning for unused variable
  smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receive
  pm: use GFP_ATOMIC when pm core call this function
  blackfin: serial: Add serial port_fer and port_mux early platform resources.
  blackfin: pinctrl-adi2: code cleanup after using pinctrl-adi2
  blackfin: adi gpio driver and pinctrl driver support
  bf609: update default config for spi
  Blackfin: bfin_gpio: Use proper mask for comparing pfunc

arch/blackfin/configs/BF609-EZKIT_defconfig

@@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_BLACKFIN_TWI=y
 CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 CONFIG_SPI=y
-CONFIG_SPI_BFIN6XX=y
+CONFIG_SPI_BFIN_V3=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set

arch/blackfin/include/asm/irq.h

@@ -23,8 +23,7 @@
 /*
  * pm save bfin pint registers
  */
-struct bfin_pm_pint_save {
-	u32 mask_set;
+struct adi_pm_pint_save {
 	u32 assign;
 	u32 edge_set;
 	u32 invert_set;

arch/blackfin/include/asm/irq_handler.h

@@ -12,11 +12,11 @@
 #include <mach/irq.h>
 
 /* init functions only */
-extern int __init init_arch_irq(void);
+extern int init_arch_irq(void);
 extern void init_exception_vectors(void);
-extern void __init program_IAR(void);
+extern void program_IAR(void);
 #ifdef init_mach_irq
-extern void __init init_mach_irq(void);
+extern void init_mach_irq(void);
 #else
 # define init_mach_irq()
 #endif

arch/blackfin/kernel/bfin_gpio.c

@@ -11,11 +11,8 @@
 #include <linux/err.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/portmux.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
-#include <asm/irq_handler.h>
 
 #if ANOMALY_05000311 || ANOMALY_05000323
 enum {
@@ -58,19 +55,6 @@ static struct gpio_port_t * const gpio_array[] = {
 	(struct gpio_port_t *) FIO0_FLAG_D,
 	(struct gpio_port_t *) FIO1_FLAG_D,
 	(struct gpio_port_t *) FIO2_FLAG_D,
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) 
-	(struct gpio_port_t *)PORTA_FER,
-	(struct gpio_port_t *)PORTB_FER,
-	(struct gpio_port_t *)PORTC_FER,
-	(struct gpio_port_t *)PORTD_FER,
-	(struct gpio_port_t *)PORTE_FER,
-	(struct gpio_port_t *)PORTF_FER,
-	(struct gpio_port_t *)PORTG_FER,
-# if defined(CONFIG_BF54x)
-	(struct gpio_port_t *)PORTH_FER,
-	(struct gpio_port_t *)PORTI_FER,
-	(struct gpio_port_t *)PORTJ_FER,
-# endif
 #else
 # error no gpio arrays defined
 #endif
@@ -169,12 +153,6 @@ DECLARE_RESERVED_MAP(gpio_irq, GPIO_BANK_NUM);
 
 inline int check_gpio(unsigned gpio)
 {
-#if defined(CONFIG_BF54x)
-	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
-	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
-	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15)
-		return -EINVAL;
-#endif
 	if (gpio >= MAX_BLACKFIN_GPIOS)
 		return -EINVAL;
 	return 0;
@@ -212,12 +190,6 @@ static void port_setup(unsigned gpio, unsigned short usage)
 	else
 		*port_fer[gpio_bank(gpio)] |= gpio_bit(gpio);
 	SSYNC();
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	if (usage == GPIO_USAGE)
-		gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
-	else
-		gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
-	SSYNC();
 #endif
 }
 
@@ -255,7 +227,7 @@ static int portmux_group_check(unsigned short per)
 	u16 ident = P_IDENT(per);
 	u16 function = P_FUNCT2MUX(per);
 	s8 offset = port_mux[ident];
-	u16 m, pmux, pfunc;
+	u16 m, pmux, pfunc, mask;
 
 	if (offset < 0)
 		return 0;
@@ -270,10 +242,12 @@ static int portmux_group_check(unsigned short per)
 			continue;
 
 		if (offset == 1)
-			pfunc = (pmux >> offset) & 3;
+			mask = 3;
 		else
-			pfunc = (pmux >> offset) & 1;
-		if (pfunc != function) {
+			mask = 1;
+
+		pfunc = (pmux >> offset) & mask;
+		if (pfunc != (function & mask)) {
 			pr_err("pin group conflict! request pin %d func %d conflict with pin %d func %d\n",
 				ident, function, m, pfunc);
 			return -EINVAL;
@@ -288,43 +262,21 @@ static void portmux_setup(unsigned short per)
 	u16 ident = P_IDENT(per);
 	u16 function = P_FUNCT2MUX(per);
 	s8 offset = port_mux[ident];
-	u16 pmux;
+	u16 pmux, mask;
 
 	if (offset == -1)
 		return;
 
 	pmux = bfin_read_PORT_MUX();
-	if (offset != 1)
-		pmux &= ~(1 << offset);
+	if (offset == 1)
+		mask = 3;
 	else
-		pmux &= ~(3 << 1);
-	pmux |= (function << offset);
-	bfin_write_PORT_MUX(pmux);
-}
-#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-inline void portmux_setup(unsigned short per)
-{
-	u16 ident = P_IDENT(per);
-	u16 function = P_FUNCT2MUX(per);
-	u32 pmux;
+		mask = 1;
 
-	pmux = gpio_array[gpio_bank(ident)]->port_mux;
+	pmux &= ~(mask << offset);
+	pmux |= ((function & mask) << offset);
 
-	pmux &= ~(0x3 << (2 * gpio_sub_n(ident)));
-	pmux |= (function & 0x3) << (2 * gpio_sub_n(ident));
-
-	gpio_array[gpio_bank(ident)]->port_mux = pmux;
-}
-
-inline u16 get_portmux(unsigned short per)
-{
-	u16 ident = P_IDENT(per);
-	u32 pmux = gpio_array[gpio_bank(ident)]->port_mux;
-	return (pmux >> (2 * gpio_sub_n(ident)) & 0x3);
-}
-static int portmux_group_check(unsigned short per)
-{
-	return 0;
+	bfin_write_PORT_MUX(pmux);
 }
 #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
 static int portmux_group_check(unsigned short per)
@@ -379,7 +331,6 @@ static int portmux_group_check(unsigned short per)
 }
 #endif
 
-#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x))
 /***********************************************************
 *
 * FUNCTIONS: Blackfin General Purpose Ports Access Functions
@@ -572,7 +523,7 @@ static const unsigned int sic_iwr_irqs[] = {
 *************************************************************
 * MODIFICATION HISTORY :
 **************************************************************/
-int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
+int bfin_gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 {
 	unsigned long flags;
 
@@ -591,7 +542,7 @@ int gpio_pm_wakeup_ctrl(unsigned gpio, unsigned ctrl)
 	return 0;
 }
 
-int bfin_pm_standby_ctrl(unsigned ctrl)
+int bfin_gpio_pm_standby_ctrl(unsigned ctrl)
 {
 	u16 bank, mask, i;
 
@@ -682,53 +633,6 @@ void bfin_gpio_pm_hibernate_restore(void)
 
 
 #endif
-#else /* CONFIG_BF54x || CONFIG_BF60x */
-#ifdef CONFIG_PM
-
-int bfin_pm_standby_ctrl(unsigned ctrl)
-{
-	return 0;
-}
-
-void bfin_gpio_pm_hibernate_suspend(void)
-{
-	int i, bank;
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		bank = gpio_bank(i);
-
-		gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer;
-		gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux;
-		gpio_bank_saved[bank].data = gpio_array[bank]->data;
-		gpio_bank_saved[bank].inen = gpio_array[bank]->inen;
-		gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set;
-	}
-}
-
-void bfin_gpio_pm_hibernate_restore(void)
-{
-	int i, bank;
-
-	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
-		bank = gpio_bank(i);
-
-		gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux;
-		gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer;
-		gpio_array[bank]->inen = gpio_bank_saved[bank].inen;
-		gpio_array[bank]->data_set = gpio_bank_saved[bank].data
-						& gpio_bank_saved[bank].dir;
-		gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir;
-	}
-}
-#endif
-
-unsigned short get_gpio_dir(unsigned gpio)
-{
-	return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)));
-}
-EXPORT_SYMBOL(get_gpio_dir);
-
-#endif /* CONFIG_BF54x || CONFIG_BF60x */
 
 /***********************************************************
 *
@@ -785,11 +689,7 @@ int peripheral_request(unsigned short per, const char *label)
 		 * be requested and used by several drivers
 		 */
 
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-		if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) {
-#else
 		if (!(per & P_MAYSHARE)) {
-#endif
 			/*
 			 * Allow that the identical pin function can
 			 * be requested from the same driver twice
@@ -938,12 +838,9 @@ int bfin_gpio_request(unsigned gpio, const char *label)
 	if (unlikely(is_reserved(gpio_irq, gpio, 1))) {
 		printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!"
 		       " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio);
-	}
-#if !(defined(CONFIG_BF54x) || defined(CONFIG_BF60x))
-	else {	/* Reset POLAR setting when acquiring a gpio for the first time */
+	} else {	/* Reset POLAR setting when acquiring a gpio for the first time */
 		set_gpio_polar(gpio, 0);
 	}
-#endif
 
 	reserve(gpio, gpio);
 	set_label(gpio, label);
@@ -1112,11 +1009,7 @@ void bfin_gpio_irq_free(unsigned gpio)
 
 static inline void __bfin_gpio_direction_input(unsigned gpio)
 {
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio);
-#else
 	gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio);
-#endif
 	gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio);
 }
 
@@ -1140,17 +1033,7 @@ EXPORT_SYMBOL(bfin_gpio_direction_input);
 
 void bfin_gpio_irq_prepare(unsigned gpio)
 {
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	unsigned long flags;
-#endif
-
 	port_setup(gpio, GPIO_USAGE);
-
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	flags = hard_local_irq_save();
-	__bfin_gpio_direction_input(gpio);
-	hard_local_irq_restore(flags);
-#endif
 }
 
 void bfin_gpio_set_value(unsigned gpio, int arg)
@@ -1175,11 +1058,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value)
 
 	gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio);
 	gpio_set_value(gpio, value);
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio);
-#else
 	gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio);
-#endif
 
 	AWA_DUMMY_READ(dir);
 	hard_local_irq_restore(flags);
@@ -1190,9 +1069,6 @@ EXPORT_SYMBOL(bfin_gpio_direction_output);
 
 int bfin_gpio_get_value(unsigned gpio)
 {
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x)
-	return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)));
-#else
 	unsigned long flags;
 
 	if (unlikely(get_gpio_edge(gpio))) {
@@ -1205,7 +1081,6 @@ int bfin_gpio_get_value(unsigned gpio)
 		return ret;
 	} else
 		return get_gpio_data(gpio);
-#endif
 }
 EXPORT_SYMBOL(bfin_gpio_get_value);
 

arch/blackfin/mach-bf548/Kconfig

@@ -377,40 +377,6 @@ config IRQ_PINT3
 
 endmenu
 
-comment "Pin Interrupt to Port Assignment"
-menu "Assignment"
-
-config PINTx_REASSIGN
-	bool "Reprogram PINT Assignment"
-	default y
-	help
-	  The interrupt assignment registers controls the pin-to-interrupt
-	  assignment in a byte-wide manner. Each option allows you to select
-	  a set of pins (High/Low Byte) of an specific Port being mapped
-	  to one of the four PIN Interrupts IRQ_PINTx.
-
-	  You shouldn't change any of these unless you know exactly what you're doing.
-	  Please consult the Blackfin BF54x Processor Hardware Reference Manual.
-
-config PINT0_ASSIGN
-	hex "PINT0_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT1_ASSIGN
-	hex "PINT1_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x01010000
-config PINT2_ASSIGN
-	hex "PINT2_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x07000101
-config PINT3_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x02020303
-
-endmenu
-
 endmenu
 
 endif

arch/blackfin/mach-bf548/include/mach/gpio.h

@@ -194,14 +194,6 @@ struct gpio_port_t {
 	unsigned int port_mux;
 };
 
-struct gpio_port_s {
-	unsigned short fer;
-	unsigned short data;
-	unsigned short dir;
-	unsigned short inen;
-	unsigned int mux;
-};
-
 #endif
 
 #include <mach-common/ports-a.h>

arch/blackfin/mach-bf548/include/mach/irq.h

@@ -433,7 +433,7 @@
 #include <linux/types.h>
 
 /*
- * bfin pint registers layout
+ * gpio pint registers layout
  */
 struct bfin_pint_regs {
 	u32 mask_set;

arch/blackfin/mach-bf609/Kconfig

@@ -9,48 +9,6 @@ source "arch/blackfin/mach-bf609/boards/Kconfig"
 
 menu "BF609 Specific Configuration"
 
-comment "Pin Interrupt to Port Assignment"
-menu "Assignment"
-
-config PINTx_REASSIGN
-	bool "Reprogram PINT Assignment"
-	default y
-	help
-	  The interrupt assignment registers controls the pin-to-interrupt
-	  assignment in a byte-wide manner. Each option allows you to select
-	  a set of pins (High/Low Byte) of an specific Port being mapped
-	  to one of the four PIN Interrupts IRQ_PINTx.
-
-	  You shouldn't change any of these unless you know exactly what you're doing.
-	  Please consult the Blackfin BF60x Processor Hardware Reference Manual.
-
-config PINT0_ASSIGN
-	hex "PINT0_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT1_ASSIGN
-	hex "PINT1_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT2_ASSIGN
-	hex "PINT2_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT3_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT4_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-config PINT5_ASSIGN
-	hex "PINT3_ASSIGN"
-	depends on PINTx_REASSIGN
-	default 0x00000101
-
-endmenu
-
 config SEC_IRQ_PRIORITY_LEVELS
 	int "SEC interrupt priority levels"
 	default 7

arch/blackfin/mach-bf609/include/mach/gpio.h

@@ -152,14 +152,6 @@ struct gpio_port_t {
 	unsigned long revid;
 };
 
-struct gpio_port_s {
-	unsigned short fer;
-	unsigned short data;
-	unsigned short dir;
-	unsigned short inen;
-	unsigned int mux;
-};
-
 #endif
 
 #include <mach-common/ports-a.h>

arch/blackfin/mach-bf609/include/mach/irq.h

@@ -298,7 +298,7 @@
 extern u8 sec_int_priority[];
 
 /*
- * bfin pint registers layout
+ * gpio pint registers layout
  */
 struct bfin_pint_regs {
 	u32 mask_set;

arch/blackfin/mach-bf609/include/mach/portmux.h

@@ -19,6 +19,7 @@
 #define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
 #define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
 #define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_MII0_PTPPPS	(P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0))
 
 #define P_RMII0 {\
 	P_MII0_ETxD0, \
@@ -30,6 +31,7 @@
 	P_MII0_TxCLK, \
 	P_MII0_PHYINT, \
 	P_MII0_CRS, \
+	P_MII0_PTPPPS, \
 	P_MII0_MDC, \
 	P_MII0_MDIO, 0}
 
@@ -44,6 +46,7 @@
 #define P_MII1_CRS	(P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
 #define P_MII1_ERxER	(P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
 #define P_MII1_TxCLK	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_MII1_PTPPPS	(P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
 
 #define P_RMII1 {\
 	P_MII1_ETxD0, \
@@ -55,6 +58,7 @@
 	P_MII1_TxCLK, \
 	P_MII1_PHYINT, \
 	P_MII1_CRS, \
+	P_MII1_PTPPPS, \
 	P_MII1_MDC, \
 	P_MII1_MDIO, 0}
 

arch/blackfin/mach-common/pm.c

@@ -27,7 +27,7 @@ struct bfin_cpu_pm_fns *bfin_cpu_pm;
 
 void bfin_pm_suspend_standby_enter(void)
 {
-#ifndef CONFIG_BF60x
+#if !BFIN_GPIO_PINT
 	bfin_pm_standby_setup();
 #endif
 
@@ -41,7 +41,7 @@ void bfin_pm_suspend_standby_enter(void)
 # endif
 #endif
 
-#ifndef CONFIG_BF60x
+#if !BFIN_GPIO_PINT
 	bfin_pm_standby_restore();
 #endif
 
@@ -128,6 +128,7 @@ static void flushinv_all_dcache(void)
 					if ((status & 0x3) != 0x3)
 						continue;
 
+
 					/* construct the address using the tag */
 					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
 
@@ -140,11 +141,14 @@ static void flushinv_all_dcache(void)
 
 int bfin_pm_suspend_mem_enter(void)
 {
-	int wakeup, ret;
+	int ret;
+#ifndef CONFIG_BF60x
+	int wakeup;
+#endif
 
 	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
 					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
-					  GFP_KERNEL);
+					  GFP_ATOMIC);
 
 	if (memptr == NULL) {
 		panic("bf53x_suspend_l1_mem malloc failed");
@@ -170,10 +174,8 @@ int bfin_pm_suspend_mem_enter(void)
 		return ret;
 	}
 
+#ifdef CONFIG_GPIO_ADI
 	bfin_gpio_pm_hibernate_suspend();
-
-#if BFIN_GPIO_PINT
-	bfin_pint_suspend();
 #endif
 
 #if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)
@@ -194,11 +196,9 @@ int bfin_pm_suspend_mem_enter(void)
 	_enable_icplb();
 	_enable_dcplb();
 
-#if BFIN_GPIO_PINT
-	bfin_pint_resume();
-#endif
-
+#ifdef CONFIG_GPIO_ADI
 	bfin_gpio_pm_hibernate_restore();
+#endif
 	blackfin_dma_resume();
 
 	kfree(memptr);

arch/blackfin/mach-common/smp.c

@@ -146,6 +146,7 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 
 	platform_clear_ipi(cpu, IRQ_SUPPLE_1);
 
+	smp_rmb();
 	bfin_ipi_data = &__get_cpu_var(bfin_ipi);
 	while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) {
 		msg = 0;
@@ -161,18 +162,20 @@ static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
 			case BFIN_IPI_CALL_FUNC:
 				generic_smp_call_function_interrupt();
 				break;
-
 			case BFIN_IPI_CALL_FUNC_SINGLE:
 				generic_smp_call_function_single_interrupt();
 				break;
-
 			case BFIN_IPI_CPU_STOP:
 				ipi_cpu_stop(cpu);
 				break;
+			default:
+				goto out;
 			}
 			atomic_dec(&bfin_ipi_data->count);
 		} while (msg < BITS_PER_LONG);
+
 	}
+out:
 	return IRQ_HANDLED;
 }
 
@@ -198,10 +201,11 @@ void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
 		bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
 		atomic_set_mask((1 << msg), &bfin_ipi_data->bits);
 		atomic_inc(&bfin_ipi_data->count);
-		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
 	}
-
 	local_irq_restore(flags);
+	smp_wmb();
+	for_each_cpu(cpu, cpumask)
+		platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
 }
 
 void arch_send_call_function_single_ipi(int cpu)