smartpqi: initial commit of Microsemi smartpqi driver

This initial commit contains Microsemi's smartpqi module.

[mkp: Minor tweaks to apply to 4.9/scsi-queue]
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

MAINTAINERS

@@ -7819,6 +7819,17 @@ W:	http://www.melexis.com
 S:	Supported
 F:	drivers/iio/temperature/mlx90614.c
 
+MICROSEMI SMART ARRAY SMARTPQI DRIVER (smartpqi)
+M:	Don Brace <don.brace@microsemi.com>
+L:	esc.storagedev@microsemi.com
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+F:	drivers/scsi/smartpqi/smartpqi*.[ch]
+F:	drivers/scsi/smartpqi/Kconfig
+F:	drivers/scsi/smartpqi/Makefile
+F:	include/linux/cciss*.h
+F:	include/uapi/linux/cciss*.h
+
 MN88472 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org

drivers/scsi/Kconfig

@@ -540,6 +540,7 @@ config SCSI_ARCMSR
 source "drivers/scsi/esas2r/Kconfig"
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt3sas/Kconfig"
+source "drivers/scsi/smartpqi/Kconfig"
 source "drivers/scsi/ufs/Kconfig"
 
 config SCSI_HPTIOP

drivers/scsi/Makefile

@@ -94,6 +94,7 @@ obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_T128)		+= t128.o
 obj-$(CONFIG_SCSI_DMX3191D)	+= dmx3191d.o
 obj-$(CONFIG_SCSI_HPSA)		+= hpsa.o
+obj-$(CONFIG_SCSI_SMARTPQI)	+= smartpqi/
 obj-$(CONFIG_SCSI_DTC3280)	+= dtc.o
 obj-$(CONFIG_SCSI_SYM53C8XX_2)	+= sym53c8xx_2/
 obj-$(CONFIG_SCSI_ZALON)	+= zalon7xx.o

drivers/scsi/smartpqi/Kconfig

+#
+# Kernel configuration file for the SMARTPQI
+#
+# Copyright (c) 2016 Microsemi Corporation
+# Copyright (c) 2016 PMC-Sierra, Inc.
+#  (mailto:esc.storagedev@microsemi.com)
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 2
+# of the License.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# NO WARRANTY
+# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+# solely responsible for determining the appropriateness of using and
+# distributing the Program and assumes all risks associated with its
+# exercise of rights under this Agreement, including but not limited to
+# the risks and costs of program errors, damage to or loss of data,
+# programs or equipment, and unavailability or interruption of operations.
+
+# DISCLAIMER OF LIABILITY
+# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+config SCSI_SMARTPQI
+	tristate "Microsemi PQI Driver"
+	default n
+	depends on PCI && SCSI && !S390
+	select SCSI_SAS_ATTRS
+	select RAID_ATTRS
+	---help---
+	This driver supports Microsemi PQI controllers.
+
+	<http://www.microsemi.com>
+
+	To compile this driver as a module, choose M here: the
+	module will be called smartpqi

drivers/scsi/smartpqi/Makefile

+ccflags-y += -I.
+obj-m		+= smartpqi.o
+smartpqi-objs := smartpqi_init.o smartpqi_sis.o smartpqi_sas_transport.o

drivers/scsi/smartpqi/smartpqi.h

+/*
+ *    driver for Microsemi PQI-based storage controllers
+ *    Copyright (c) 2016 Microsemi Corporation
+ *    Copyright (c) 2016 PMC-Sierra, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
+ *
+ */
+
+#if !defined(_SMARTPQI_H)
+#define _SMARTPQI_H
+
+#pragma pack(1)
+
+#define PQI_DEVICE_SIGNATURE	"PQI DREG"
+
+/* This structure is defined by the PQI specification. */
+struct pqi_device_registers {
+	__le64	signature;
+	u8	function_and_status_code;
+	u8	reserved[7];
+	u8	max_admin_iq_elements;
+	u8	max_admin_oq_elements;
+	u8	admin_iq_element_length;	/* in 16-byte units */
+	u8	admin_oq_element_length;	/* in 16-byte units */
+	__le16	max_reset_timeout;		/* in 100-millisecond units */
+	u8	reserved1[2];
+	__le32	legacy_intx_status;
+	__le32	legacy_intx_mask_set;
+	__le32	legacy_intx_mask_clear;
+	u8	reserved2[28];
+	__le32	device_status;
+	u8	reserved3[4];
+	__le64	admin_iq_pi_offset;
+	__le64	admin_oq_ci_offset;
+	__le64	admin_iq_element_array_addr;
+	__le64	admin_oq_element_array_addr;
+	__le64	admin_iq_ci_addr;
+	__le64	admin_oq_pi_addr;
+	u8	admin_iq_num_elements;
+	u8	admin_oq_num_elements;
+	__le16	admin_queue_int_msg_num;
+	u8	reserved4[4];
+	__le32	device_error;
+	u8	reserved5[4];
+	__le64	error_details;
+	__le32	device_reset;
+	__le32	power_action;
+	u8	reserved6[104];
+};
+
+/*
+ * controller registers
+ *
+ * These are defined by the PMC implementation.
+ *
+ * Some registers (those named sis_*) are only used when in
+ * legacy SIS mode before we transition the controller into
+ * PQI mode.  There are a number of other SIS mode registers,
+ * but we don't use them, so only the SIS registers that we
+ * care about are defined here.  The offsets mentioned in the
+ * comments are the offsets from the PCIe BAR 0.
+ */
+struct pqi_ctrl_registers {
+	u8	reserved[0x20];
+	__le32	sis_host_to_ctrl_doorbell;		/* 20h */
+	u8	reserved1[0x34 - (0x20 + sizeof(__le32))];
+	__le32	sis_interrupt_mask;			/* 34h */
+	u8	reserved2[0x9c - (0x34 + sizeof(__le32))];
+	__le32	sis_ctrl_to_host_doorbell;		/* 9Ch */
+	u8	reserved3[0xa0 - (0x9c + sizeof(__le32))];
+	__le32	sis_ctrl_to_host_doorbell_clear;	/* A0h */
+	u8	reserved4[0xbc - (0xa0 + sizeof(__le32))];
+	__le32	sis_firmware_status;			/* BCh */
+	u8	reserved5[0x1000 - (0xbc + sizeof(__le32))];
+	__le32	sis_mailbox[8];				/* 1000h */
+	u8	reserved6[0x4000 - (0x1000 + (sizeof(__le32) * 8))];
+	/*
+	 * The PQI spec states that the PQI registers should be at
+	 * offset 0 from the PCIe BAR 0.  However, we can't map
+	 * them at offset 0 because that would break compatibility
+	 * with the SIS registers.  So we map them at offset 4000h.
+	 */
+	struct pqi_device_registers pqi_registers;	/* 4000h */
+};
+
+#define PQI_DEVICE_REGISTERS_OFFSET	0x4000
+
+enum pqi_io_path {
+	RAID_PATH = 0,
+	AIO_PATH = 1
+};
+
+struct pqi_sg_descriptor {
+	__le64	address;
+	__le32	length;
+	__le32	flags;
+};
+
+/* manifest constants for the flags field of pqi_sg_descriptor */
+#define CISS_SG_LAST	0x40000000
+#define CISS_SG_CHAIN	0x80000000
+
+struct pqi_iu_header {
+	u8	iu_type;
+	u8	reserved;
+	__le16	iu_length;	/* in bytes - does not include the length */
+				/* of this header */
+	__le16	response_queue_id;	/* specifies the OQ where the */
+					/*   response IU is to be delivered */
+	u8	work_area[2];	/* reserved for driver use */
+};
+
+/*
+ * According to the PQI spec, the IU header is only the first 4 bytes of our
+ * pqi_iu_header structure.
+ */
+#define PQI_REQUEST_HEADER_LENGTH	4
+
+struct pqi_general_admin_request {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	u8	function_code;
+	union {
+		struct {
+			u8	reserved[33];
+			__le32	buffer_length;
+			struct pqi_sg_descriptor sg_descriptor;
+		} report_device_capability;
+
+		struct {
+			u8	reserved;
+			__le16	queue_id;
+			u8	reserved1[2];
+			__le64	element_array_addr;
+			__le64	ci_addr;
+			__le16	num_elements;
+			__le16	element_length;
+			u8	queue_protocol;
+			u8	reserved2[23];
+			__le32	vendor_specific;
+		} create_operational_iq;
+
+		struct {
+			u8	reserved;
+			__le16	queue_id;
+			u8	reserved1[2];
+			__le64	element_array_addr;
+			__le64	pi_addr;
+			__le16	num_elements;
+			__le16	element_length;
+			u8	queue_protocol;
+			u8	reserved2[3];
+			__le16	int_msg_num;
+			__le16	coalescing_count;
+			__le32	min_coalescing_time;
+			__le32	max_coalescing_time;
+			u8	reserved3[8];
+			__le32	vendor_specific;
+		} create_operational_oq;
+
+		struct {
+			u8	reserved;
+			__le16	queue_id;
+			u8	reserved1[50];
+		} delete_operational_queue;
+
+		struct {
+			u8	reserved;
+			__le16	queue_id;
+			u8	reserved1[46];
+			__le32	vendor_specific;
+		} change_operational_iq_properties;
+
+	} data;
+};
+
+struct pqi_general_admin_response {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	u8	function_code;
+	u8	status;
+	union {
+		struct {
+			u8	status_descriptor[4];
+			__le64	iq_pi_offset;
+			u8	reserved[40];
+		} create_operational_iq;
+
+		struct {
+			u8	status_descriptor[4];
+			__le64	oq_ci_offset;
+			u8	reserved[40];
+		} create_operational_oq;
+	} data;
+};
+
+struct pqi_iu_layer_descriptor {
+	u8	inbound_spanning_supported : 1;
+	u8	reserved : 7;
+	u8	reserved1[5];
+	__le16	max_inbound_iu_length;
+	u8	outbound_spanning_supported : 1;
+	u8	reserved2 : 7;
+	u8	reserved3[5];
+	__le16	max_outbound_iu_length;
+};
+
+struct pqi_device_capability {
+	__le16	data_length;
+	u8	reserved[6];
+	u8	iq_arbitration_priority_support_bitmask;
+	u8	maximum_aw_a;
+	u8	maximum_aw_b;
+	u8	maximum_aw_c;
+	u8	max_arbitration_burst : 3;
+	u8	reserved1 : 4;
+	u8	iqa : 1;
+	u8	reserved2[2];
+	u8	iq_freeze : 1;
+	u8	reserved3 : 7;
+	__le16	max_inbound_queues;
+	__le16	max_elements_per_iq;
+	u8	reserved4[4];
+	__le16	max_iq_element_length;
+	__le16	min_iq_element_length;
+	u8	reserved5[2];
+	__le16	max_outbound_queues;
+	__le16	max_elements_per_oq;
+	__le16	intr_coalescing_time_granularity;
+	__le16	max_oq_element_length;
+	__le16	min_oq_element_length;
+	u8	reserved6[24];
+	struct pqi_iu_layer_descriptor iu_layer_descriptors[32];
+};
+
+#define PQI_MAX_EMBEDDED_SG_DESCRIPTORS		4
+
+struct pqi_raid_path_request {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	__le16	nexus_id;
+	__le32	buffer_length;
+	u8	lun_number[8];
+	__le16	protocol_specific;
+	u8	data_direction : 2;
+	u8	partial : 1;
+	u8	reserved1 : 4;
+	u8	fence : 1;
+	__le16	error_index;
+	u8	reserved2;
+	u8	task_attribute : 3;
+	u8	command_priority : 4;
+	u8	reserved3 : 1;
+	u8	reserved4 : 2;
+	u8	additional_cdb_bytes_usage : 3;
+	u8	reserved5 : 3;
+	u8	cdb[32];
+	struct pqi_sg_descriptor
+		sg_descriptors[PQI_MAX_EMBEDDED_SG_DESCRIPTORS];
+};
+
+struct pqi_aio_path_request {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	u8	reserved1[2];
+	__le32	nexus_id;
+	__le32	buffer_length;
+	u8	data_direction : 2;
+	u8	partial : 1;
+	u8	memory_type : 1;
+	u8	fence : 1;
+	u8	encryption_enable : 1;
+	u8	reserved2 : 2;
+	u8	task_attribute : 3;
+	u8	command_priority : 4;
+	u8	reserved3 : 1;
+	__le16	data_encryption_key_index;
+	__le32	encrypt_tweak_lower;
+	__le32	encrypt_tweak_upper;
+	u8	cdb[16];
+	__le16	error_index;
+	u8	num_sg_descriptors;
+	u8	cdb_length;
+	u8	lun_number[8];
+	u8	reserved4[4];
+	struct pqi_sg_descriptor
+		sg_descriptors[PQI_MAX_EMBEDDED_SG_DESCRIPTORS];
+};
+
+struct pqi_io_response {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	__le16	error_index;
+	u8	reserved2[4];
+};
+
+struct pqi_general_management_request {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	union {
+		struct {
+			u8	reserved[2];
+			__le32	buffer_length;
+			struct pqi_sg_descriptor sg_descriptors[3];
+		} report_event_configuration;
+
+		struct {
+			__le16	global_event_oq_id;
+			__le32	buffer_length;
+			struct pqi_sg_descriptor sg_descriptors[3];
+		} set_event_configuration;
+	} data;
+};
+
+struct pqi_event_descriptor {
+	u8	event_type;
+	u8	reserved;
+	__le16	oq_id;
+};
+
+struct pqi_event_config {
+	u8	reserved[2];
+	u8	num_event_descriptors;
+	u8	reserved1;
+	struct pqi_event_descriptor descriptors[1];
+};
+
+#define PQI_MAX_EVENT_DESCRIPTORS	255
+
+struct pqi_event_response {
+	struct pqi_iu_header header;
+	u8	event_type;
+	u8	reserved2 : 7;
+	u8	request_acknowlege : 1;
+	__le16	event_id;
+	__le32	additional_event_id;
+	u8	data[16];
+};
+
+struct pqi_event_acknowledge_request {
+	struct pqi_iu_header header;
+	u8	event_type;
+	u8	reserved2;
+	__le16	event_id;
+	__le32	additional_event_id;
+};
+
+struct pqi_task_management_request {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	__le16	nexus_id;
+	u8	reserved[4];
+	u8	lun_number[8];
+	__le16	protocol_specific;
+	__le16	outbound_queue_id_to_manage;
+	__le16	request_id_to_manage;
+	u8	task_management_function;
+	u8	reserved2 : 7;
+	u8	fence : 1;
+};
+
+#define SOP_TASK_MANAGEMENT_LUN_RESET	0x8
+#define PQI_ABORT_TIMEOUT_MSECS		(20 * 1000)
+
+struct pqi_task_management_response {
+	struct pqi_iu_header header;
+	__le16	request_id;
+	__le16	nexus_id;
+	u8	additional_response_info[3];
+	u8	response_code;
+};
+
+struct pqi_aio_error_info {
+	u8	status;
+	u8	service_response;
+	u8	data_present;
+	u8	reserved;
+	__le32	residual_count;
+	__le16	data_length;
+	__le16	reserved1;
+	u8	data[256];
+};
+
+struct pqi_raid_error_info {
+	u8	data_in_result;
+	u8	data_out_result;
+	u8	reserved[3];
+	u8	status;
+	__le16	status_qualifier;
+	__le16	sense_data_length;
+	__le16	response_data_length;
+	__le32	data_in_transferred;
+	__le32	data_out_transferred;
+	u8	data[256];
+};
+
+#define PQI_REQUEST_IU_TASK_MANAGEMENT			0x13
+#define PQI_REQUEST_IU_RAID_PATH_IO			0x14
+#define PQI_REQUEST_IU_AIO_PATH_IO			0x15
+#define PQI_REQUEST_IU_GENERAL_ADMIN			0x60
+#define PQI_REQUEST_IU_REPORT_VENDOR_EVENT_CONFIG	0x72
+#define PQI_REQUEST_IU_SET_VENDOR_EVENT_CONFIG		0x73
+#define PQI_REQUEST_IU_ACKNOWLEDGE_VENDOR_EVENT		0xf6
+
+#define PQI_RESPONSE_IU_GENERAL_MANAGEMENT		0x81
+#define PQI_RESPONSE_IU_TASK_MANAGEMENT			0x93
+#define PQI_RESPONSE_IU_GENERAL_ADMIN			0xe0
+#define PQI_RESPONSE_IU_RAID_PATH_IO_SUCCESS		0xf0
+#define PQI_RESPONSE_IU_AIO_PATH_IO_SUCCESS		0xf1
+#define PQI_RESPONSE_IU_RAID_PATH_IO_ERROR		0xf2
+#define PQI_RESPONSE_IU_AIO_PATH_IO_ERROR		0xf3
+#define PQI_RESPONSE_IU_AIO_PATH_DISABLED		0xf4
+#define PQI_RESPONSE_IU_VENDOR_EVENT			0xf5
+
+#define PQI_GENERAL_ADMIN_FUNCTION_REPORT_DEVICE_CAPABILITY	0x0
+#define PQI_GENERAL_ADMIN_FUNCTION_CREATE_IQ			0x10
+#define PQI_GENERAL_ADMIN_FUNCTION_CREATE_OQ			0x11
+#define PQI_GENERAL_ADMIN_FUNCTION_DELETE_IQ			0x12
+#define PQI_GENERAL_ADMIN_FUNCTION_DELETE_OQ			0x13
+#define PQI_GENERAL_ADMIN_FUNCTION_CHANGE_IQ_PROPERTY		0x14
+
+#define PQI_GENERAL_ADMIN_STATUS_SUCCESS	0x0
+
+#define PQI_IQ_PROPERTY_IS_AIO_QUEUE	0x1
+
+#define PQI_GENERAL_ADMIN_IU_LENGTH		0x3c
+#define PQI_PROTOCOL_SOP			0x0
+
+#define PQI_DATA_IN_OUT_GOOD					0x0
+#define PQI_DATA_IN_OUT_UNDERFLOW				0x1
+#define PQI_DATA_IN_OUT_BUFFER_ERROR				0x40
+#define PQI_DATA_IN_OUT_BUFFER_OVERFLOW				0x41
+#define PQI_DATA_IN_OUT_BUFFER_OVERFLOW_DESCRIPTOR_AREA		0x42
+#define PQI_DATA_IN_OUT_BUFFER_OVERFLOW_BRIDGE			0x43
+#define PQI_DATA_IN_OUT_PCIE_FABRIC_ERROR			0x60
+#define PQI_DATA_IN_OUT_PCIE_COMPLETION_TIMEOUT			0x61
+#define PQI_DATA_IN_OUT_PCIE_COMPLETER_ABORT_RECEIVED		0x62
+#define PQI_DATA_IN_OUT_PCIE_UNSUPPORTED_REQUEST_RECEIVED	0x63
+#define PQI_DATA_IN_OUT_PCIE_ECRC_CHECK_FAILED			0x64
+#define PQI_DATA_IN_OUT_PCIE_UNSUPPORTED_REQUEST		0x65
+#define PQI_DATA_IN_OUT_PCIE_ACS_VIOLATION			0x66
+#define PQI_DATA_IN_OUT_PCIE_TLP_PREFIX_BLOCKED			0x67
+#define PQI_DATA_IN_OUT_PCIE_POISONED_MEMORY_READ		0x6F
+#define PQI_DATA_IN_OUT_ERROR					0xf0
+#define PQI_DATA_IN_OUT_PROTOCOL_ERROR				0xf1
+#define PQI_DATA_IN_OUT_HARDWARE_ERROR				0xf2
+#define PQI_DATA_IN_OUT_UNSOLICITED_ABORT			0xf3
+#define PQI_DATA_IN_OUT_ABORTED					0xf4
+#define PQI_DATA_IN_OUT_TIMEOUT					0xf5
+
+#define CISS_CMD_STATUS_SUCCESS			0x0
+#define CISS_CMD_STATUS_TARGET_STATUS		0x1
+#define CISS_CMD_STATUS_DATA_UNDERRUN		0x2
+#define CISS_CMD_STATUS_DATA_OVERRUN		0x3
+#define CISS_CMD_STATUS_INVALID			0x4
+#define CISS_CMD_STATUS_PROTOCOL_ERROR		0x5
+#define CISS_CMD_STATUS_HARDWARE_ERROR		0x6
+#define CISS_CMD_STATUS_CONNECTION_LOST		0x7
+#define CISS_CMD_STATUS_ABORTED			0x8
+#define CISS_CMD_STATUS_ABORT_FAILED		0x9
+#define CISS_CMD_STATUS_UNSOLICITED_ABORT	0xa
+#define CISS_CMD_STATUS_TIMEOUT			0xb
+#define CISS_CMD_STATUS_UNABORTABLE		0xc
+#define CISS_CMD_STATUS_TMF			0xd
+#define CISS_CMD_STATUS_AIO_DISABLED		0xe
+
+#define PQI_NUM_EVENT_QUEUE_ELEMENTS	32
+#define PQI_EVENT_OQ_ELEMENT_LENGTH	sizeof(struct pqi_event_response)
+
+#define PQI_EVENT_TYPE_HOTPLUG			0x1
+#define PQI_EVENT_TYPE_HARDWARE			0x2
+#define PQI_EVENT_TYPE_PHYSICAL_DEVICE		0x4
+#define PQI_EVENT_TYPE_LOGICAL_DEVICE		0x5
+#define PQI_EVENT_TYPE_AIO_STATE_CHANGE		0xfd
+#define PQI_EVENT_TYPE_AIO_CONFIG_CHANGE	0xfe
+#define PQI_EVENT_TYPE_HEARTBEAT		0xff
+
+#pragma pack()
+
+#define PQI_ERROR_BUFFER_ELEMENT_LENGTH		\
+	sizeof(struct pqi_raid_error_info)
+
+/* these values are based on our implementation */
+#define PQI_ADMIN_IQ_NUM_ELEMENTS		8
+#define PQI_ADMIN_OQ_NUM_ELEMENTS		20
+#define PQI_ADMIN_IQ_ELEMENT_LENGTH		64
+#define PQI_ADMIN_OQ_ELEMENT_LENGTH		64
+
+#define PQI_OPERATIONAL_IQ_ELEMENT_LENGTH	128
+#define PQI_OPERATIONAL_OQ_ELEMENT_LENGTH	16
+
+#define PQI_MIN_MSIX_VECTORS		1
+#define PQI_MAX_MSIX_VECTORS		64
+
+/* these values are defined by the PQI spec */
+#define PQI_MAX_NUM_ELEMENTS_ADMIN_QUEUE	255
+#define PQI_MAX_NUM_ELEMENTS_OPERATIONAL_QUEUE	65535
+#define PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT	64
+#define PQI_QUEUE_ELEMENT_LENGTH_ALIGNMENT	16
+#define PQI_ADMIN_INDEX_ALIGNMENT		64
+#define PQI_OPERATIONAL_INDEX_ALIGNMENT		4
+
+#define PQI_MIN_OPERATIONAL_QUEUE_ID		1
+#define PQI_MAX_OPERATIONAL_QUEUE_ID		65535
+
+#define PQI_AIO_SERV_RESPONSE_COMPLETE		0
+#define PQI_AIO_SERV_RESPONSE_FAILURE		1
+#define PQI_AIO_SERV_RESPONSE_TMF_COMPLETE	2
+#define PQI_AIO_SERV_RESPONSE_TMF_SUCCEEDED	3
+#define PQI_AIO_SERV_RESPONSE_TMF_REJECTED	4
+#define PQI_AIO_SERV_RESPONSE_TMF_INCORRECT_LUN	5
+
+#define PQI_AIO_STATUS_IO_ERROR			0x1
+#define PQI_AIO_STATUS_IO_ABORTED		0x2
+#define PQI_AIO_STATUS_NO_PATH_TO_DEVICE	0x3
+#define PQI_AIO_STATUS_INVALID_DEVICE		0x4
+#define PQI_AIO_STATUS_AIO_PATH_DISABLED	0xe
+#define PQI_AIO_STATUS_UNDERRUN			0x51
+#define PQI_AIO_STATUS_OVERRUN			0x75
+
+typedef u32 pqi_index_t;
+
+/* SOP data direction flags */
+#define SOP_NO_DIRECTION_FLAG	0
+#define SOP_WRITE_FLAG		1	/* host writes data to Data-Out */
+					/* buffer */
+#define SOP_READ_FLAG		2	/* host receives data from Data-In */
+					/* buffer */
+#define SOP_BIDIRECTIONAL	3	/* data is transferred from the */
+					/* Data-Out buffer and data is */
+					/* transferred to the Data-In buffer */
+
+#define SOP_TASK_ATTRIBUTE_SIMPLE		0
+#define SOP_TASK_ATTRIBUTE_HEAD_OF_QUEUE	1
+#define SOP_TASK_ATTRIBUTE_ORDERED		2
+#define SOP_TASK_ATTRIBUTE_ACA			4
+
+#define SOP_TASK_MANAGEMENT_FUNCTION_COMPLETE	0x0
+#define SOP_TASK_MANAGEMENT_FUNCTION_REJECTED	0x4
+#define SOP_TASK_MANAGEMENT_FUNCTION_FAILED	0x5
+#define SOP_TASK_MANAGEMENT_FUNCTION_SUCCEEDED	0x8
+
+/* additional CDB bytes usage field codes */
+#define SOP_ADDITIONAL_CDB_BYTES_0	0	/* 16-byte CDB */
+#define SOP_ADDITIONAL_CDB_BYTES_4	1	/* 20-byte CDB */
+#define SOP_ADDITIONAL_CDB_BYTES_8	2	/* 24-byte CDB */
+#define SOP_ADDITIONAL_CDB_BYTES_12	3	/* 28-byte CDB */
+#define SOP_ADDITIONAL_CDB_BYTES_16	4	/* 32-byte CDB */
+
+/*
+ * The purpose of this structure is to obtain proper alignment of objects in
+ * an admin queue pair.
+ */
+struct pqi_admin_queues_aligned {
+	__aligned(PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT)
+		u8	iq_element_array[PQI_ADMIN_IQ_ELEMENT_LENGTH]
+					[PQI_ADMIN_IQ_NUM_ELEMENTS];
+	__aligned(PQI_QUEUE_ELEMENT_ARRAY_ALIGNMENT)
+		u8	oq_element_array[PQI_ADMIN_OQ_ELEMENT_LENGTH]
+					[PQI_ADMIN_OQ_NUM_ELEMENTS];
+	__aligned(PQI_ADMIN_INDEX_ALIGNMENT) pqi_index_t iq_ci;
+	__aligned(PQI_ADMIN_INDEX_ALIGNMENT) pqi_index_t oq_pi;
+};
+
+struct pqi_admin_queues {
+	void		*iq_element_array;
+	void		*oq_element_array;
+	volatile pqi_index_t *iq_ci;
+	volatile pqi_index_t *oq_pi;
+	dma_addr_t	iq_element_array_bus_addr;
+	dma_addr_t	oq_element_array_bus_addr;
+	dma_addr_t	iq_ci_bus_addr;
+	dma_addr_t	oq_pi_bus_addr;
+	__le32 __iomem	*iq_pi;
+	pqi_index_t	iq_pi_copy;
+	__le32 __iomem	*oq_ci;
+	pqi_index_t	oq_ci_copy;
+	struct task_struct *task;
+	u16		int_msg_num;
+};
+
+struct pqi_queue_group {
+	struct pqi_ctrl_info *ctrl_info;	/* backpointer */
+	u16		iq_id[2];
+	u16		oq_id;
+	u16		int_msg_num;
+	void		*iq_element_array[2];
+	void		*oq_element_array;
+	dma_addr_t	iq_element_array_bus_addr[2];
+	dma_addr_t	oq_element_array_bus_addr;
+	__le32 __iomem	*iq_pi[2];
+	pqi_index_t	iq_pi_copy[2];
+	volatile pqi_index_t *iq_ci[2];
+	volatile pqi_index_t *oq_pi;
+	dma_addr_t	iq_ci_bus_addr[2];
+	dma_addr_t	oq_pi_bus_addr;
+	__le32 __iomem	*oq_ci;
+	pqi_index_t	oq_ci_copy;
+	spinlock_t	submit_lock[2];	/* protect submission queue */
+	struct list_head request_list[2];
+};
+
+struct pqi_event_queue {
+	u16		oq_id;
+	u16		int_msg_num;
+	void		*oq_element_array;
+	volatile pqi_index_t *oq_pi;
+	dma_addr_t	oq_element_array_bus_addr;
+	dma_addr_t	oq_pi_bus_addr;
+	__le32 __iomem	*oq_ci;
+	pqi_index_t	oq_ci_copy;
+};
+
+#define PQI_DEFAULT_QUEUE_GROUP		0
+#define PQI_MAX_QUEUE_GROUPS		PQI_MAX_MSIX_VECTORS
+
+struct pqi_encryption_info {
+	u16	data_encryption_key_index;
+	u32	encrypt_tweak_lower;
+	u32	encrypt_tweak_upper;
+};
+
+#define PQI_MAX_OUTSTANDING_REQUESTS	((u32)~0)
+#define PQI_MAX_TRANSFER_SIZE		(4 * 1024U * 1024U)
+
+#define RAID_MAP_MAX_ENTRIES		1024
+
+#define PQI_RESERVED_IO_SLOTS_LUN_RESET			1
+#define PQI_RESERVED_IO_SLOTS_EVENT_ACK			1
+#define PQI_RESERVED_IO_SLOTS_SYNCHRONOUS_REQUESTS	3
+#define PQI_RESERVED_IO_SLOTS				\
+	(PQI_RESERVED_IO_SLOTS_LUN_RESET + PQI_RESERVED_IO_SLOTS_EVENT_ACK + \
+	PQI_RESERVED_IO_SLOTS_SYNCHRONOUS_REQUESTS)
+
+#define PQI_PHYSICAL_DEVICE_BUS		0
+#define PQI_RAID_VOLUME_BUS		1
+#define PQI_HBA_BUS			2
+#define PQI_MAX_BUS			PQI_HBA_BUS
+
+#pragma pack(1)
+
+struct report_lun_header {
+	__be32	list_length;
+	u8	extended_response;
+	u8	reserved[3];
+};
+
+struct report_log_lun_extended_entry {
+	u8	lunid[8];
+	u8	volume_id[16];
+};
+
+struct report_log_lun_extended {
+	struct report_lun_header header;
+	struct report_log_lun_extended_entry lun_entries[1];
+};
+
+struct report_phys_lun_extended_entry {
+	u8	lunid[8];
+	__be64	wwid;
+	u8	device_type;
+	u8	device_flags;
+	u8	lun_count;	/* number of LUNs in a multi-LUN device */
+	u8	redundant_paths;
+	u32	aio_handle;
+};
+
+/* for device_flags field of struct report_phys_lun_extended_entry */
+#define REPORT_PHYS_LUN_DEV_FLAG_NON_DISK	0x1
+#define REPORT_PHYS_LUN_DEV_FLAG_AIO_ENABLED	0x8
+
+struct report_phys_lun_extended {
+	struct report_lun_header header;
+	struct report_phys_lun_extended_entry lun_entries[1];
+};
+
+struct raid_map_disk_data {
+	u32	aio_handle;
+	u8	xor_mult[2];
+	u8	reserved[2];
+};
+
+/* constants for flags field of RAID map */
+#define RAID_MAP_ENCRYPTION_ENABLED	0x1
+
+struct raid_map {
+	__le32	structure_size;		/* size of entire structure in bytes */
+	__le32	volume_blk_size;	/* bytes / block in the volume */
+	__le64	volume_blk_cnt;		/* logical blocks on the volume */
+	u8	phys_blk_shift;		/* shift factor to convert between */
+					/* units of logical blocks and */
+					/* physical disk blocks */
+	u8	parity_rotation_shift;	/* shift factor to convert between */
+					/* units of logical stripes and */
+					/* physical stripes */
+	__le16	strip_size;		/* blocks used on each disk / stripe */
+	__le64	disk_starting_blk;	/* first disk block used in volume */
+	__le64	disk_blk_cnt;		/* disk blocks used by volume / disk */
+	__le16	data_disks_per_row;	/* data disk entries / row in the map */
+	__le16	metadata_disks_per_row;	/* mirror/parity disk entries / row */
+					/* in the map */
+	__le16	row_cnt;		/* rows in each layout map */
+	__le16	layout_map_count;	/* layout maps (1 map per */
+					/* mirror parity group) */
+	__le16	flags;
+	__le16	data_encryption_key_index;
+	u8	reserved[16];
+	struct raid_map_disk_data disk_data[RAID_MAP_MAX_ENTRIES];
+};
+
+#pragma pack()
+
+#define RAID_CTLR_LUNID		"\0\0\0\0\0\0\0\0"
+
+struct pqi_scsi_dev {
+	int	devtype;		/* as reported by INQUIRY commmand */
+	u8	device_type;		/* as reported by */
+					/* BMIC_IDENTIFY_PHYSICAL_DEVICE */
+					/* only valid for devtype = TYPE_DISK */
+	int	bus;
+	int	target;
+	int	lun;
+	u8	scsi3addr[8];
+	__be64	wwid;
+	u8	volume_id[16];
+	u8	is_physical_device : 1;
+	u8	target_lun_valid : 1;
+	u8	expose_device : 1;
+	u8	no_uld_attach : 1;
+	u8	aio_enabled : 1;	/* only valid for physical disks */
+	u8	device_gone : 1;
+	u8	new_device : 1;
+	u8	keep_device : 1;
+	u8	volume_offline : 1;
+	u8	vendor[8];		/* bytes 8-15 of inquiry data */
+	u8	model[16];		/* bytes 16-31 of inquiry data */
+	u64	sas_address;
+	u8	raid_level;
+	u16	queue_depth;		/* max. queue_depth for this device */
+	u16	advertised_queue_depth;
+	u32	aio_handle;
+	u8	volume_status;
+	u8	active_path_index;
+	u8	path_map;
+	u8	bay;
+	u8	box[8];
+	u16	phys_connector[8];
+	int	offload_configured;	/* I/O accel RAID offload configured */
+	int	offload_enabled;	/* I/O accel RAID offload enabled */
+	int	offload_enabled_pending;
+	int	offload_to_mirror;	/* Send next I/O accelerator RAID */
+					/* offload request to mirror drive. */
+	struct raid_map *raid_map;	/* I/O accelerator RAID map */
+
+	struct pqi_sas_port *sas_port;
+	struct scsi_device *sdev;
+	bool	reset_in_progress;
+
+	struct list_head scsi_device_list_entry;
+	struct list_head new_device_list_entry;
+	struct list_head add_list_entry;
+	struct list_head delete_list_entry;
+};
+
+/* VPD inquiry pages */
+#define SCSI_VPD_SUPPORTED_PAGES	0x0	/* standard page */
+#define SCSI_VPD_DEVICE_ID		0x83	/* standard page */
+#define CISS_VPD_LV_DEVICE_GEOMETRY	0xc1	/* vendor-specific page */
+#define CISS_VPD_LV_OFFLOAD_STATUS	0xc2	/* vendor-specific page */
+#define CISS_VPD_LV_STATUS		0xc3	/* vendor-specific page */
+
+#define VPD_PAGE	(1 << 8)
+
+#pragma pack(1)
+
+/* structure for CISS_VPD_LV_STATUS */
+struct ciss_vpd_logical_volume_status {
+	u8	peripheral_info;
+	u8	page_code;
+	u8	reserved;
+	u8	page_length;
+	u8	volume_status;
+	u8	reserved2[3];
+	__be32	flags;
+};
+
+#pragma pack()
+
+/* constants for volume_status field of ciss_vpd_logical_volume_status */
+#define CISS_LV_OK					0
+#define CISS_LV_FAILED					1
+#define CISS_LV_NOT_CONFIGURED				2
+#define CISS_LV_DEGRADED				3
+#define CISS_LV_READY_FOR_RECOVERY			4
+#define CISS_LV_UNDERGOING_RECOVERY			5
+#define CISS_LV_WRONG_PHYSICAL_DRIVE_REPLACED		6
+#define CISS_LV_PHYSICAL_DRIVE_CONNECTION_PROBLEM	7
+#define CISS_LV_HARDWARE_OVERHEATING			8
+#define CISS_LV_HARDWARE_HAS_OVERHEATED			9
+#define CISS_LV_UNDERGOING_EXPANSION			10
+#define CISS_LV_NOT_AVAILABLE				11
+#define CISS_LV_QUEUED_FOR_EXPANSION			12
+#define CISS_LV_DISABLED_SCSI_ID_CONFLICT		13
+#define CISS_LV_EJECTED					14
+#define CISS_LV_UNDERGOING_ERASE			15
+/* state 16 not used */
+#define CISS_LV_READY_FOR_PREDICTIVE_SPARE_REBUILD	17
+#define CISS_LV_UNDERGOING_RPI				18
+#define CISS_LV_PENDING_RPI				19
+#define CISS_LV_ENCRYPTED_NO_KEY			20
+/* state 21 not used */
+#define CISS_LV_UNDERGOING_ENCRYPTION			22
+#define CISS_LV_UNDERGOING_ENCRYPTION_REKEYING		23
+#define CISS_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER	24
+#define CISS_LV_PENDING_ENCRYPTION			25
+#define CISS_LV_PENDING_ENCRYPTION_REKEYING		26
+#define CISS_LV_NOT_SUPPORTED				27
+#define CISS_LV_STATUS_UNAVAILABLE			255
+
+/* constants for flags field of ciss_vpd_logical_volume_status */
+#define CISS_LV_FLAGS_NO_HOST_IO	0x1	/* volume not available for */
+						/* host I/O */
+
+/* for SAS hosts and SAS expanders */
+struct pqi_sas_node {
+	struct device *parent_dev;
+	struct list_head port_list_head;
+};
+
+struct pqi_sas_port {
+	struct list_head port_list_entry;
+	u64	sas_address;
+	struct sas_port *port;
+	int	next_phy_index;
+	struct list_head phy_list_head;
+	struct pqi_sas_node *parent_node;
+	struct sas_rphy *rphy;
+};
+
+struct pqi_sas_phy {
+	struct list_head phy_list_entry;
+	struct sas_phy *phy;
+	struct pqi_sas_port *parent_port;
+	bool	added_to_port;
+};
+
+struct pqi_io_request {
+	atomic_t	refcount;
+	u16		index;
+	void (*io_complete_callback)(struct pqi_io_request *io_request,
+		void *context);
+	void		*context;
+	int		status;
+	struct scsi_cmnd *scmd;
+	void		*error_info;
+	struct pqi_sg_descriptor *sg_chain_buffer;
+	dma_addr_t	sg_chain_buffer_dma_handle;
+	void		*iu;
+	struct list_head request_list_entry;
+};
+
+/* for indexing into the pending_events[] field of struct pqi_ctrl_info */
+#define PQI_EVENT_HEARTBEAT		0
+#define PQI_EVENT_HOTPLUG		1
+#define PQI_EVENT_HARDWARE		2
+#define PQI_EVENT_PHYSICAL_DEVICE	3
+#define PQI_EVENT_LOGICAL_DEVICE	4
+#define PQI_EVENT_AIO_STATE_CHANGE	5
+#define PQI_EVENT_AIO_CONFIG_CHANGE	6
+#define PQI_NUM_SUPPORTED_EVENTS	7
+
+struct pqi_event {
+	bool	pending;
+	u8	event_type;
+	__le16	event_id;
+	__le32	additional_event_id;
+};
+
+struct pqi_ctrl_info {
+	unsigned int	ctrl_id;
+	struct pci_dev	*pci_dev;
+	char		firmware_version[11];
+	void __iomem	*iomem_base;
+	struct pqi_ctrl_registers __iomem *registers;
+	struct pqi_device_registers __iomem *pqi_registers;
+	u32		max_sg_entries;
+	u32		config_table_offset;
+	u32		config_table_length;
+	u16		max_inbound_queues;
+	u16		max_elements_per_iq;
+	u16		max_iq_element_length;
+	u16		max_outbound_queues;
+	u16		max_elements_per_oq;
+	u16		max_oq_element_length;
+	u32		max_transfer_size;
+	u32		max_outstanding_requests;
+	u32		max_io_slots;
+	unsigned int	scsi_ml_can_queue;
+	unsigned short	sg_tablesize;
+	unsigned int	max_sectors;
+	u32		error_buffer_length;
+	void		*error_buffer;
+	dma_addr_t	error_buffer_dma_handle;
+	size_t		sg_chain_buffer_length;
+	unsigned int	num_queue_groups;
+	unsigned int	num_active_queue_groups;
+	u16		num_elements_per_iq;
+	u16		num_elements_per_oq;
+	u16		max_inbound_iu_length_per_firmware;
+	u16		max_inbound_iu_length;
+	unsigned int	max_sg_per_iu;
+	void		*admin_queue_memory_base;
+	u32		admin_queue_memory_length;
+	dma_addr_t	admin_queue_memory_base_dma_handle;
+	void		*queue_memory_base;
+	u32		queue_memory_length;
+	dma_addr_t	queue_memory_base_dma_handle;
+	struct pqi_admin_queues admin_queues;
+	struct pqi_queue_group queue_groups[PQI_MAX_QUEUE_GROUPS];
+	struct pqi_event_queue event_queue;
+	int		max_msix_vectors;
+	int		num_msix_vectors_enabled;
+	int		num_msix_vectors_initialized;
+	u32		msix_vectors[PQI_MAX_MSIX_VECTORS];
+	void		*intr_data[PQI_MAX_MSIX_VECTORS];
+	int		event_irq;
+	struct Scsi_Host *scsi_host;
+
+	struct mutex	scan_mutex;
+	u8		inbound_spanning_supported : 1;
+	u8		outbound_spanning_supported : 1;
+	u8		pqi_mode_enabled : 1;
+	u8		controller_online : 1;
+	u8		heartbeat_timer_started : 1;
+
+	struct list_head scsi_device_list;
+	spinlock_t	scsi_device_list_lock;
+
+	struct delayed_work rescan_work;
+	struct delayed_work update_time_work;
+
+	struct pqi_sas_node *sas_host;
+	u64		sas_address;
+
+	struct pqi_io_request *io_request_pool;
+	u16		next_io_request_slot;
+
+	struct pqi_event pending_events[PQI_NUM_SUPPORTED_EVENTS];
+	struct work_struct event_work;
+
+	atomic_t	num_interrupts;
+	int		previous_num_interrupts;
+	unsigned int	num_heartbeats_requested;
+	struct timer_list heartbeat_timer;
+
+	struct semaphore sync_request_sem;
+	struct semaphore lun_reset_sem;
+};
+
+/*
+ * assume worst case: SATA queue depth of 31 minus 4 internal firmware commands
+ */
+#define PQI_PHYSICAL_DISK_DEFAULT_MAX_QUEUE_DEPTH	27
+
+/* 0 = no limit */
+#define PQI_LOGICAL_DRIVE_DEFAULT_MAX_QUEUE_DEPTH	0
+
+/* CISS commands */
+#define CISS_READ		0xc0
+#define CISS_REPORT_LOG		0xc2	/* Report Logical LUNs */
+#define CISS_REPORT_PHYS	0xc3	/* Report Physical LUNs */
+#define CISS_GET_RAID_MAP	0xc8
+
+/* constants for CISS_REPORT_LOG/CISS_REPORT_PHYS commands */
+#define CISS_REPORT_LOG_EXTENDED		0x1
+#define CISS_REPORT_PHYS_EXTENDED		0x2
+
+/* BMIC commands */
+#define BMIC_IDENTIFY_CONTROLLER		0x11
+#define BMIC_IDENTIFY_PHYSICAL_DEVICE		0x15
+#define BMIC_READ				0x26
+#define BMIC_WRITE				0x27
+#define BMIC_SENSE_CONTROLLER_PARAMETERS	0x64
+#define BMIC_SENSE_SUBSYSTEM_INFORMATION	0x66
+#define BMIC_WRITE_HOST_WELLNESS		0xa5
+#define BMIC_CACHE_FLUSH			0xc2
+
+#define SA_CACHE_FLUSH				0x01
+
+#define MASKED_DEVICE(lunid)			((lunid)[3] & 0xc0)
+#define CISS_GET_BUS(lunid)			((lunid)[7] & 0x3f)
+#define CISS_GET_LEVEL_2_TARGET(lunid)		((lunid)[6])
+#define CISS_GET_DRIVE_NUMBER(lunid)		\
+	(((CISS_GET_BUS((lunid)) - 1) << 8) +	\
+	CISS_GET_LEVEL_2_TARGET((lunid)))
+
+#define NO_TIMEOUT		((unsigned long) -1)
+
+#pragma pack(1)
+
+struct bmic_identify_controller {
+	u8	configured_logical_drive_count;
+	__le32	configuration_signature;
+	u8	firmware_version[4];
+	u8	reserved[145];
+	__le16	extended_logical_unit_count;
+	u8	reserved1[34];
+	__le16	firmware_build_number;
+	u8	reserved2[100];
+	u8	controller_mode;
+	u8	reserved3[32];
+};
+
+struct bmic_identify_physical_device {
+	u8	scsi_bus;		/* SCSI Bus number on controller */
+	u8	scsi_id;		/* SCSI ID on this bus */
+	__le16	block_size;		/* sector size in bytes */
+	__le32	total_blocks;		/* number for sectors on drive */
+	__le32	reserved_blocks;	/* controller reserved (RIS) */
+	u8	model[40];		/* Physical Drive Model */
+	u8	serial_number[40];	/* Drive Serial Number */
+	u8	firmware_revision[8];	/* drive firmware revision */
+	u8	scsi_inquiry_bits;	/* inquiry byte 7 bits */
+	u8	compaq_drive_stamp;	/* 0 means drive not stamped */
+	u8	last_failure_reason;
+	u8	flags;
+	u8	more_flags;
+	u8	scsi_lun;		/* SCSI LUN for phys drive */
+	u8	yet_more_flags;
+	u8	even_more_flags;
+	__le32	spi_speed_rules;
+	u8	phys_connector[2];	/* connector number on controller */
+	u8	phys_box_on_bus;	/* phys enclosure this drive resides */
+	u8	phys_bay_in_box;	/* phys drv bay this drive resides */
+	__le32	rpm;			/* drive rotational speed in RPM */
+	u8	device_type;		/* type of drive */
+	u8	sata_version;		/* only valid when device_type = */
+					/* BMIC_DEVICE_TYPE_SATA */
+	__le64	big_total_block_count;
+	__le64	ris_starting_lba;
+	__le32	ris_size;
+	u8	wwid[20];
+	u8	controller_phy_map[32];
+	__le16	phy_count;
+	u8	phy_connected_dev_type[256];
+	u8	phy_to_drive_bay_num[256];
+	__le16	phy_to_attached_dev_index[256];
+	u8	box_index;
+	u8	reserved;
+	__le16	extra_physical_drive_flags;
+	u8	negotiated_link_rate[256];
+	u8	phy_to_phy_map[256];
+	u8	redundant_path_present_map;
+	u8	redundant_path_failure_map;
+	u8	active_path_number;
+	__le16	alternate_paths_phys_connector[8];
+	u8	alternate_paths_phys_box_on_port[8];
+	u8	multi_lun_device_lun_count;
+	u8	minimum_good_fw_revision[8];
+	u8	unique_inquiry_bytes[20];
+	u8	current_temperature_degreesC;
+	u8	temperature_threshold_degreesC;
+	u8	max_temperature_degreesC;
+	u8	logical_blocks_per_phys_block_exp;
+	__le16	current_queue_depth_limit;
+	u8	switch_name[10];
+	__le16	switch_port;
+	u8	alternate_paths_switch_name[40];
+	u8	alternate_paths_switch_port[8];
+	__le16	power_on_hours;
+	__le16	percent_endurance_used;
+	u8	drive_authentication;
+	u8	smart_carrier_authentication;
+	u8	smart_carrier_app_fw_version;
+	u8	smart_carrier_bootloader_fw_version;
+	u8	encryption_key_name[64];
+	__le32	misc_drive_flags;
+	__le16	dek_index;
+	u8	padding[112];
+};
+
+#pragma pack()
+
+int pqi_add_sas_host(struct Scsi_Host *shost, struct pqi_ctrl_info *ctrl_info);
+void pqi_delete_sas_host(struct pqi_ctrl_info *ctrl_info);
+int pqi_add_sas_device(struct pqi_sas_node *pqi_sas_node,
+	struct pqi_scsi_dev *device);
+void pqi_remove_sas_device(struct pqi_scsi_dev *device);
+struct pqi_scsi_dev *pqi_find_device_by_sas_rphy(
+	struct pqi_ctrl_info *ctrl_info, struct sas_rphy *rphy);
+
+extern struct sas_function_template pqi_sas_transport_functions;
+
+#if !defined(readq)
+#define readq readq
+static inline u64 readq(const volatile void __iomem *addr)
+{
+	u32 lower32;
+	u32 upper32;
+
+	lower32 = readl(addr);
+	upper32 = readl(addr + 4);
+
+	return ((u64)upper32 << 32) | lower32;
+}
+#endif
+
+#if !defined(writeq)
+#define writeq writeq
+static inline void writeq(u64 value, volatile void __iomem *addr)
+{
+	u32 lower32;
+	u32 upper32;
+
+	lower32 = lower_32_bits(value);
+	upper32 = upper_32_bits(value);
+
+	writel(lower32, addr);
+	writel(upper32, addr + 4);
+}
+#endif
+
+#endif /* _SMARTPQI_H */

drivers/scsi/smartpqi/smartpqi_sas_transport.c

+/*
+ *    driver for Microsemi PQI-based storage controllers
+ *    Copyright (c) 2016 Microsemi Corporation
+ *    Copyright (c) 2016 PMC-Sierra, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
+ *
+ */
+
+#include <linux/kernel.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_transport_sas.h>
+#include "smartpqi.h"
+
+static struct pqi_sas_phy *pqi_alloc_sas_phy(struct pqi_sas_port *pqi_sas_port)
+{
+	struct pqi_sas_phy *pqi_sas_phy;
+	struct sas_phy *phy;
+
+	pqi_sas_phy = kzalloc(sizeof(*pqi_sas_phy), GFP_KERNEL);
+	if (!pqi_sas_phy)
+		return NULL;
+
+	phy = sas_phy_alloc(pqi_sas_port->parent_node->parent_dev,
+		pqi_sas_port->next_phy_index);
+	if (!phy) {
+		kfree(pqi_sas_phy);
+		return NULL;
+	}
+
+	pqi_sas_port->next_phy_index++;
+	pqi_sas_phy->phy = phy;
+	pqi_sas_phy->parent_port = pqi_sas_port;
+
+	return pqi_sas_phy;
+}
+
+static void pqi_free_sas_phy(struct pqi_sas_phy *pqi_sas_phy)
+{
+	struct sas_phy *phy = pqi_sas_phy->phy;
+
+	sas_port_delete_phy(pqi_sas_phy->parent_port->port, phy);
+	sas_phy_free(phy);
+	if (pqi_sas_phy->added_to_port)
+		list_del(&pqi_sas_phy->phy_list_entry);
+	kfree(pqi_sas_phy);
+}
+
+static int pqi_sas_port_add_phy(struct pqi_sas_phy *pqi_sas_phy)
+{
+	int rc;
+	struct pqi_sas_port *pqi_sas_port;
+	struct sas_phy *phy;
+	struct sas_identify *identify;
+
+	pqi_sas_port = pqi_sas_phy->parent_port;
+	phy = pqi_sas_phy->phy;
+
+	identify = &phy->identify;
+	memset(identify, 0, sizeof(*identify));
+	identify->sas_address = pqi_sas_port->sas_address;
+	identify->device_type = SAS_END_DEVICE;
+	identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+	identify->target_port_protocols = SAS_PROTOCOL_STP;
+	phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+	phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+	phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+	phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
+	phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+	rc = sas_phy_add(pqi_sas_phy->phy);
+	if (rc)
+		return rc;
+
+	sas_port_add_phy(pqi_sas_port->port, pqi_sas_phy->phy);
+	list_add_tail(&pqi_sas_phy->phy_list_entry,
+		&pqi_sas_port->phy_list_head);
+	pqi_sas_phy->added_to_port = true;
+
+	return 0;
+}
+
+static int pqi_sas_port_add_rphy(struct pqi_sas_port *pqi_sas_port,
+	struct sas_rphy *rphy)
+{
+	struct sas_identify *identify;
+
+	identify = &rphy->identify;
+	identify->sas_address = pqi_sas_port->sas_address;
+	identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+	identify->target_port_protocols = SAS_PROTOCOL_STP;
+
+	return sas_rphy_add(rphy);
+}
+
+static struct pqi_sas_port *pqi_alloc_sas_port(
+	struct pqi_sas_node *pqi_sas_node, u64 sas_address)
+{
+	int rc;
+	struct pqi_sas_port *pqi_sas_port;
+	struct sas_port *port;
+
+	pqi_sas_port = kzalloc(sizeof(*pqi_sas_port), GFP_KERNEL);
+	if (!pqi_sas_port)
+		return NULL;
+
+	INIT_LIST_HEAD(&pqi_sas_port->phy_list_head);
+	pqi_sas_port->parent_node = pqi_sas_node;
+
+	port = sas_port_alloc_num(pqi_sas_node->parent_dev);
+	if (!port)
+		goto free_pqi_port;
+
+	rc = sas_port_add(port);
+	if (rc)
+		goto free_sas_port;
+
+	pqi_sas_port->port = port;
+	pqi_sas_port->sas_address = sas_address;
+	list_add_tail(&pqi_sas_port->port_list_entry,
+		&pqi_sas_node->port_list_head);
+
+	return pqi_sas_port;
+
+free_sas_port:
+	sas_port_free(port);
+free_pqi_port:
+	kfree(pqi_sas_port);
+
+	return NULL;
+}
+
+static void pqi_free_sas_port(struct pqi_sas_port *pqi_sas_port)
+{
+	struct pqi_sas_phy *pqi_sas_phy;
+	struct pqi_sas_phy *next;
+
+	list_for_each_entry_safe(pqi_sas_phy, next,
+			&pqi_sas_port->phy_list_head, phy_list_entry)
+		pqi_free_sas_phy(pqi_sas_phy);
+
+	sas_port_delete(pqi_sas_port->port);
+	list_del(&pqi_sas_port->port_list_entry);
+	kfree(pqi_sas_port);
+}
+
+static struct pqi_sas_node *pqi_alloc_sas_node(struct device *parent_dev)
+{
+	struct pqi_sas_node *pqi_sas_node;
+
+	pqi_sas_node = kzalloc(sizeof(*pqi_sas_node), GFP_KERNEL);
+	if (pqi_sas_node) {
+		pqi_sas_node->parent_dev = parent_dev;
+		INIT_LIST_HEAD(&pqi_sas_node->port_list_head);
+	}
+
+	return pqi_sas_node;
+}
+
+static void pqi_free_sas_node(struct pqi_sas_node *pqi_sas_node)
+{
+	struct pqi_sas_port *pqi_sas_port;
+	struct pqi_sas_port *next;
+
+	if (!pqi_sas_node)
+		return;
+
+	list_for_each_entry_safe(pqi_sas_port, next,
+			&pqi_sas_node->port_list_head, port_list_entry)
+		pqi_free_sas_port(pqi_sas_port);
+
+	kfree(pqi_sas_node);
+}
+
+struct pqi_scsi_dev *pqi_find_device_by_sas_rphy(
+	struct pqi_ctrl_info *ctrl_info, struct sas_rphy *rphy)
+{
+	struct pqi_scsi_dev *device;
+
+	list_for_each_entry(device, &ctrl_info->scsi_device_list,
+		scsi_device_list_entry) {
+		if (!device->sas_port)
+			continue;
+		if (device->sas_port->rphy == rphy)
+			return device;
+	}
+
+	return NULL;
+}
+
+int pqi_add_sas_host(struct Scsi_Host *shost, struct pqi_ctrl_info *ctrl_info)
+{
+	int rc;
+	struct device *parent_dev;
+	struct pqi_sas_node *pqi_sas_node;
+	struct pqi_sas_port *pqi_sas_port;
+	struct pqi_sas_phy *pqi_sas_phy;
+
+	parent_dev = &shost->shost_gendev;
+
+	pqi_sas_node = pqi_alloc_sas_node(parent_dev);
+	if (!pqi_sas_node)
+		return -ENOMEM;
+
+	pqi_sas_port = pqi_alloc_sas_port(pqi_sas_node, ctrl_info->sas_address);
+	if (!pqi_sas_port) {
+		rc = -ENODEV;
+		goto free_sas_node;
+	}
+
+	pqi_sas_phy = pqi_alloc_sas_phy(pqi_sas_port);
+	if (!pqi_sas_phy) {
+		rc = -ENODEV;
+		goto free_sas_port;
+	}
+
+	rc = pqi_sas_port_add_phy(pqi_sas_phy);
+	if (rc)
+		goto free_sas_phy;
+
+	ctrl_info->sas_host = pqi_sas_node;
+
+	return 0;
+
+free_sas_phy:
+	pqi_free_sas_phy(pqi_sas_phy);
+free_sas_port:
+	pqi_free_sas_port(pqi_sas_port);
+free_sas_node:
+	pqi_free_sas_node(pqi_sas_node);
+
+	return rc;
+}
+
+void pqi_delete_sas_host(struct pqi_ctrl_info *ctrl_info)
+{
+	pqi_free_sas_node(ctrl_info->sas_host);
+}
+
+int pqi_add_sas_device(struct pqi_sas_node *pqi_sas_node,
+	struct pqi_scsi_dev *device)
+{
+	int rc;
+	struct pqi_sas_port *pqi_sas_port;
+	struct sas_rphy *rphy;
+
+	pqi_sas_port = pqi_alloc_sas_port(pqi_sas_node, device->sas_address);
+	if (!pqi_sas_port)
+		return -ENOMEM;
+
+	rphy = sas_end_device_alloc(pqi_sas_port->port);
+	if (!rphy) {
+		rc = -ENODEV;
+		goto free_sas_port;
+	}
+
+	pqi_sas_port->rphy = rphy;
+	device->sas_port = pqi_sas_port;
+
+	rc = pqi_sas_port_add_rphy(pqi_sas_port, rphy);
+	if (rc)
+		goto free_sas_port;
+
+	return 0;
+
+free_sas_port:
+	pqi_free_sas_port(pqi_sas_port);
+	device->sas_port = NULL;
+
+	return rc;
+}
+
+void pqi_remove_sas_device(struct pqi_scsi_dev *device)
+{
+	if (device->sas_port) {
+		pqi_free_sas_port(device->sas_port);
+		device->sas_port = NULL;
+	}
+}
+
+static int pqi_sas_get_linkerrors(struct sas_phy *phy)
+{
+	return 0;
+}
+
+static int pqi_sas_get_enclosure_identifier(struct sas_rphy *rphy,
+	u64 *identifier)
+{
+	return 0;
+}
+
+static int pqi_sas_get_bay_identifier(struct sas_rphy *rphy)
+{
+	return -ENXIO;
+}
+
+static int pqi_sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+	return 0;
+}
+
+static int pqi_sas_phy_enable(struct sas_phy *phy, int enable)
+{
+	return 0;
+}
+
+static int pqi_sas_phy_setup(struct sas_phy *phy)
+{
+	return 0;
+}
+
+static void pqi_sas_phy_release(struct sas_phy *phy)
+{
+}
+
+static int pqi_sas_phy_speed(struct sas_phy *phy,
+	struct sas_phy_linkrates *rates)
+{
+	return -EINVAL;
+}
+
+/* SMP = Serial Management Protocol */
+
+static int pqi_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+	struct request *req)
+{
+	return -EINVAL;
+}
+
+struct sas_function_template pqi_sas_transport_functions = {
+	.get_linkerrors = pqi_sas_get_linkerrors,
+	.get_enclosure_identifier = pqi_sas_get_enclosure_identifier,
+	.get_bay_identifier = pqi_sas_get_bay_identifier,
+	.phy_reset = pqi_sas_phy_reset,
+	.phy_enable = pqi_sas_phy_enable,
+	.phy_setup = pqi_sas_phy_setup,
+	.phy_release = pqi_sas_phy_release,
+	.set_phy_speed = pqi_sas_phy_speed,
+	.smp_handler = pqi_sas_smp_handler,
+};

drivers/scsi/smartpqi/smartpqi_sis.c

+/*
+ *    driver for Microsemi PQI-based storage controllers
+ *    Copyright (c) 2016 Microsemi Corporation
+ *    Copyright (c) 2016 PMC-Sierra, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <scsi/scsi_device.h>
+#include <asm/unaligned.h>
+#include "smartpqi.h"
+#include "smartpqi_sis.h"
+
+/* legacy SIS interface commands */
+#define SIS_CMD_GET_ADAPTER_PROPERTIES		0x19
+#define SIS_CMD_INIT_BASE_STRUCT_ADDRESS	0x1b
+#define SIS_CMD_GET_PQI_CAPABILITIES		0x3000
+
+/* for submission of legacy SIS commands */
+#define SIS_REENABLE_SIS_MODE			0x1
+#define SIS_ENABLE_MSIX				0x40
+#define SIS_SOFT_RESET				0x100
+#define SIS_CMD_READY				0x200
+#define SIS_CMD_COMPLETE			0x1000
+#define SIS_CLEAR_CTRL_TO_HOST_DOORBELL		0x1000
+#define SIS_CMD_STATUS_SUCCESS			0x1
+#define SIS_CMD_COMPLETE_TIMEOUT_SECS		30
+#define SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS	10
+
+/* used with SIS_CMD_GET_ADAPTER_PROPERTIES command */
+#define SIS_EXTENDED_PROPERTIES_SUPPORTED	0x800000
+#define SIS_SMARTARRAY_FEATURES_SUPPORTED	0x2
+#define SIS_PQI_MODE_SUPPORTED			0x4
+#define SIS_REQUIRED_EXTENDED_PROPERTIES	\
+	(SIS_SMARTARRAY_FEATURES_SUPPORTED | SIS_PQI_MODE_SUPPORTED)
+
+/* used with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
+#define SIS_BASE_STRUCT_REVISION		9
+#define SIS_BASE_STRUCT_ALIGNMENT		16
+
+#define SIS_CTRL_KERNEL_UP			0x80
+#define SIS_CTRL_KERNEL_PANIC			0x100
+#define SIS_CTRL_READY_TIMEOUT_SECS		30
+#define SIS_CTRL_READY_POLL_INTERVAL_MSECS	10
+
+#pragma pack(1)
+
+/* for use with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
+struct sis_base_struct {
+	__le32	revision;		/* revision of this structure */
+	__le32	flags;			/* reserved */
+	__le32	error_buffer_paddr_low;	/* lower 32 bits of physical memory */
+					/* buffer for PQI error response */
+					/* data */
+	__le32	error_buffer_paddr_high;	/* upper 32 bits of physical */
+						/* memory buffer for PQI */
+						/* error response data */
+	__le32	error_buffer_element_length;	/* length of each PQI error */
+						/* response buffer element */
+						/*   in bytes */
+	__le32	error_buffer_num_elements;	/* total number of PQI error */
+						/* response buffers available */
+};
+
+#pragma pack()
+
+int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info)
+{
+	unsigned long timeout;
+	u32 status;
+
+	timeout = (SIS_CTRL_READY_TIMEOUT_SECS * HZ) + jiffies;
+
+	while (1) {
+		status = readl(&ctrl_info->registers->sis_firmware_status);
+		if (status != ~0) {
+			if (status & SIS_CTRL_KERNEL_PANIC) {
+				dev_err(&ctrl_info->pci_dev->dev,
+					"controller is offline: status code 0x%x\n",
+					readl(
+					&ctrl_info->registers->sis_mailbox[7]));
+				return -ENODEV;
+			}
+			if (status & SIS_CTRL_KERNEL_UP)
+				break;
+		}
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+		msleep(SIS_CTRL_READY_POLL_INTERVAL_MSECS);
+	}
+
+	return 0;
+}
+
+bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info)
+{
+	bool running;
+	u32 status;
+
+	status = readl(&ctrl_info->registers->sis_firmware_status);
+
+	if (status & SIS_CTRL_KERNEL_PANIC)
+		running = false;
+	else
+		running = true;
+
+	if (!running)
+		dev_err(&ctrl_info->pci_dev->dev,
+			"controller is offline: status code 0x%x\n",
+			readl(&ctrl_info->registers->sis_mailbox[7]));
+
+	return running;
+}
+
+/* used for passing command parameters/results when issuing SIS commands */
+struct sis_sync_cmd_params {
+	u32	mailbox[6];	/* mailboxes 0-5 */
+};
+
+static int sis_send_sync_cmd(struct pqi_ctrl_info *ctrl_info,
+	u32 cmd, struct sis_sync_cmd_params *params)
+{
+	struct pqi_ctrl_registers __iomem *registers;
+	unsigned int i;
+	unsigned long timeout;
+	u32 doorbell;
+	u32 cmd_status;
+
+	registers = ctrl_info->registers;
+
+	/* Write the command to mailbox 0. */
+	writel(cmd, &registers->sis_mailbox[0]);
+
+	/*
+	 * Write the command parameters to mailboxes 1-4 (mailbox 5 is not used
+	 * when sending a command to the controller).
+	 */
+	for (i = 1; i <= 4; i++)
+		writel(params->mailbox[i], &registers->sis_mailbox[i]);
+
+	/* Clear the command doorbell. */
+	writel(SIS_CLEAR_CTRL_TO_HOST_DOORBELL,
+		&registers->sis_ctrl_to_host_doorbell_clear);
+
+	/* Disable doorbell interrupts by masking all interrupts. */
+	writel(~0, &registers->sis_interrupt_mask);
+
+	/*
+	 * Force the completion of the interrupt mask register write before
+	 * submitting the command.
+	 */
+	readl(&registers->sis_interrupt_mask);
+
+	/* Submit the command to the controller. */
+	writel(SIS_CMD_READY, &registers->sis_host_to_ctrl_doorbell);
+
+	/*
+	 * Poll for command completion.  Note that the call to msleep() is at
+	 * the top of the loop in order to give the controller time to start
+	 * processing the command before we start polling.
+	 */
+	timeout = (SIS_CMD_COMPLETE_TIMEOUT_SECS * HZ) + jiffies;
+	while (1) {
+		msleep(SIS_CMD_COMPLETE_POLL_INTERVAL_MSECS);
+		doorbell = readl(&registers->sis_ctrl_to_host_doorbell);
+		if (doorbell & SIS_CMD_COMPLETE)
+			break;
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+	}
+
+	/* Read the command status from mailbox 0. */
+	cmd_status = readl(&registers->sis_mailbox[0]);
+	if (cmd_status != SIS_CMD_STATUS_SUCCESS) {
+		dev_err(&ctrl_info->pci_dev->dev,
+			"SIS command failed for command 0x%x: status = 0x%x\n",
+			cmd, cmd_status);
+		return -EINVAL;
+	}
+
+	/*
+	 * The command completed successfully, so save the command status and
+	 * read the values returned in mailboxes 1-5.
+	 */
+	params->mailbox[0] = cmd_status;
+	for (i = 1; i < ARRAY_SIZE(params->mailbox); i++)
+		params->mailbox[i] = readl(&registers->sis_mailbox[i]);
+
+	return 0;
+}
+
+/*
+ * This function verifies that we are talking to a controller that speaks PQI.
+ */
+
+int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info)
+{
+	int rc;
+	u32 properties;
+	u32 extended_properties;
+	struct sis_sync_cmd_params params;
+
+	memset(&params, 0, sizeof(params));
+
+	rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_ADAPTER_PROPERTIES,
+		&params);
+	if (rc)
+		return rc;
+
+	properties = params.mailbox[1];
+
+	if (!(properties & SIS_EXTENDED_PROPERTIES_SUPPORTED))
+		return -ENODEV;
+
+	extended_properties = params.mailbox[4];
+
+	if ((extended_properties & SIS_REQUIRED_EXTENDED_PROPERTIES) !=
+		SIS_REQUIRED_EXTENDED_PROPERTIES)
+		return -ENODEV;
+
+	return 0;
+}
+
+int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info)
+{
+	int rc;
+	struct sis_sync_cmd_params params;
+
+	memset(&params, 0, sizeof(params));
+
+	rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_GET_PQI_CAPABILITIES,
+		&params);
+	if (rc)
+		return rc;
+
+	ctrl_info->max_sg_entries = params.mailbox[1];
+	ctrl_info->max_transfer_size = params.mailbox[2];
+	ctrl_info->max_outstanding_requests = params.mailbox[3];
+	ctrl_info->config_table_offset = params.mailbox[4];
+	ctrl_info->config_table_length = params.mailbox[5];
+
+	return 0;
+}
+
+int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info)
+{
+	int rc;
+	void *base_struct_unaligned;
+	struct sis_base_struct *base_struct;
+	struct sis_sync_cmd_params params;
+	unsigned long error_buffer_paddr;
+	dma_addr_t bus_address;
+
+	base_struct_unaligned = kzalloc(sizeof(*base_struct)
+		+ SIS_BASE_STRUCT_ALIGNMENT - 1, GFP_KERNEL);
+	if (!base_struct_unaligned)
+		return -ENOMEM;
+
+	base_struct = PTR_ALIGN(base_struct_unaligned,
+		SIS_BASE_STRUCT_ALIGNMENT);
+	error_buffer_paddr = (unsigned long)ctrl_info->error_buffer_dma_handle;
+
+	put_unaligned_le32(SIS_BASE_STRUCT_REVISION, &base_struct->revision);
+	put_unaligned_le32(lower_32_bits(error_buffer_paddr),
+		&base_struct->error_buffer_paddr_low);
+	put_unaligned_le32(upper_32_bits(error_buffer_paddr),
+		&base_struct->error_buffer_paddr_high);
+	put_unaligned_le32(PQI_ERROR_BUFFER_ELEMENT_LENGTH,
+		&base_struct->error_buffer_element_length);
+	put_unaligned_le32(ctrl_info->max_io_slots,
+		&base_struct->error_buffer_num_elements);
+
+	bus_address = pci_map_single(ctrl_info->pci_dev, base_struct,
+		sizeof(*base_struct), PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(ctrl_info->pci_dev, bus_address)) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	memset(&params, 0, sizeof(params));
+	params.mailbox[1] = lower_32_bits((u64)bus_address);
+	params.mailbox[2] = upper_32_bits((u64)bus_address);
+	params.mailbox[3] = sizeof(*base_struct);
+
+	rc = sis_send_sync_cmd(ctrl_info, SIS_CMD_INIT_BASE_STRUCT_ADDRESS,
+		&params);
+
+	pci_unmap_single(ctrl_info->pci_dev, bus_address, sizeof(*base_struct),
+		PCI_DMA_TODEVICE);
+
+out:
+	kfree(base_struct_unaligned);
+
+	return rc;
+}
+
+/* Enable MSI-X interrupts on the controller. */
+
+void sis_enable_msix(struct pqi_ctrl_info *ctrl_info)
+{
+	u32 doorbell_register;
+
+	doorbell_register =
+		readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+	doorbell_register |= SIS_ENABLE_MSIX;
+
+	writel(doorbell_register,
+		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+}
+
+/* Disable MSI-X interrupts on the controller. */
+
+void sis_disable_msix(struct pqi_ctrl_info *ctrl_info)
+{
+	u32 doorbell_register;
+
+	doorbell_register =
+		readl(&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+	doorbell_register &= ~SIS_ENABLE_MSIX;
+
+	writel(doorbell_register,
+		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+}
+
+void sis_soft_reset(struct pqi_ctrl_info *ctrl_info)
+{
+	writel(SIS_SOFT_RESET,
+		&ctrl_info->registers->sis_host_to_ctrl_doorbell);
+}
+
+#define SIS_MODE_READY_TIMEOUT_SECS	30
+
+int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info)
+{
+	int rc;
+	unsigned long timeout;
+	struct pqi_ctrl_registers __iomem *registers;
+	u32 doorbell;
+
+	registers = ctrl_info->registers;
+
+	writel(SIS_REENABLE_SIS_MODE,
+		&registers->sis_host_to_ctrl_doorbell);
+
+	rc = 0;
+	timeout = (SIS_MODE_READY_TIMEOUT_SECS * HZ) + jiffies;
+
+	while (1) {
+		doorbell = readl(&registers->sis_ctrl_to_host_doorbell);
+		if ((doorbell & SIS_REENABLE_SIS_MODE) == 0)
+			break;
+		if (time_after(jiffies, timeout)) {
+			rc = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	if (rc)
+		dev_err(&ctrl_info->pci_dev->dev,
+			"re-enabling SIS mode failed\n");
+
+	return rc;
+}
+
+static void __attribute__((unused)) verify_structures(void)
+{
+	BUILD_BUG_ON(offsetof(struct sis_base_struct,
+		revision) != 0x0);
+	BUILD_BUG_ON(offsetof(struct sis_base_struct,
+		flags) != 0x4);
+	BUILD_BUG_ON(offsetof(struct sis_base_struct,
+		error_buffer_paddr_low) != 0x8);
+	BUILD_BUG_ON(offsetof(struct sis_base_struct,
+		error_buffer_paddr_high) != 0xc);
+	BUILD_BUG_ON(offsetof(struct sis_base_struct,
+		error_buffer_element_length) != 0x10);
+	BUILD_BUG_ON(offsetof(struct sis_base_struct,
+		error_buffer_num_elements) != 0x14);
+	BUILD_BUG_ON(sizeof(struct sis_base_struct) != 0x18);
+}

drivers/scsi/smartpqi/smartpqi_sis.h

+/*
+ *    driver for Microsemi PQI-based storage controllers
+ *    Copyright (c) 2016 Microsemi Corporation
+ *    Copyright (c) 2016 PMC-Sierra, Inc.
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; version 2 of the License.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *    NON INFRINGEMENT.  See the GNU General Public License for more details.
+ *
+ *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
+ *
+ */
+
+#if !defined(_SMARTPQI_SIS_H)
+#define _SMARTPQI_SIS_H
+
+int sis_wait_for_ctrl_ready(struct pqi_ctrl_info *ctrl_info);
+bool sis_is_firmware_running(struct pqi_ctrl_info *ctrl_info);
+int sis_get_ctrl_properties(struct pqi_ctrl_info *ctrl_info);
+int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info);
+int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info);
+void sis_enable_msix(struct pqi_ctrl_info *ctrl_info);
+void sis_disable_msix(struct pqi_ctrl_info *ctrl_info);
+void sis_soft_reset(struct pqi_ctrl_info *ctrl_info);
+int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);
+
+#endif	/* _SMARTPQI_SIS_H */