Commit 6c310681 authored by Vineet Gupta's avatar Vineet Gupta

ARC: cacheflush: No need to retain DC_CTRL from __before_dc_op()

That is because __after_dc_op() already reads it for status check, so it
is better anyways to use that "newer" value.

Also reduces the clutter in callers for passing from/to these routines.
Signed-off-by: default avatarVineet Gupta <vgupta@synopsys.com>
parent 8ea2ddff
......@@ -207,32 +207,33 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
* Machine specific helpers for Entire D-Cache or Per Line ops
*/
static inline unsigned int __before_dc_op(const int op)
static inline void __before_dc_op(const int op)
{
unsigned int reg = reg;
if (op == OP_FLUSH_N_INV) {
/* Dcache provides 2 cmd: FLUSH or INV
* INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
* flush-n-inv is achieved by INV cmd but with IM=1
* So toggle INV sub-mode depending on op request and default
*/
reg = read_aux_reg(ARC_REG_DC_CTRL);
write_aux_reg(ARC_REG_DC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH)
;
const unsigned int ctl = ARC_REG_DC_CTRL;
write_aux_reg(ctl, read_aux_reg(ctl) | DC_CTRL_INV_MODE_FLUSH);
}
return reg;
}
static inline void __after_dc_op(const int op, unsigned int reg)
static inline void __after_dc_op(const int op)
{
if (op & OP_FLUSH) /* flush / flush-n-inv both wait */
while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS);
if (op & OP_FLUSH) {
const unsigned int ctl = ARC_REG_DC_CTRL;
unsigned int reg;
/* Switch back to default Invalidate mode */
if (op == OP_FLUSH_N_INV)
write_aux_reg(ARC_REG_DC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH);
/* flush / flush-n-inv both wait */
while ((reg = read_aux_reg(ctl)) & DC_CTRL_FLUSH_STATUS)
;
/* Switch back to default Invalidate mode */
if (op == OP_FLUSH_N_INV)
write_aux_reg(ctl, reg & ~DC_CTRL_INV_MODE_FLUSH);
}
}
/*
......@@ -243,10 +244,9 @@ static inline void __after_dc_op(const int op, unsigned int reg)
*/
static inline void __dc_entire_op(const int op)
{
unsigned int ctrl_reg;
int aux;
ctrl_reg = __before_dc_op(op);
__before_dc_op(op);
if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */
aux = ARC_REG_DC_IVDC;
......@@ -255,7 +255,7 @@ static inline void __dc_entire_op(const int op)
write_aux_reg(aux, 0x1);
__after_dc_op(op, ctrl_reg);
__after_dc_op(op);
}
/* For kernel mappings cache operation: index is same as paddr */
......@@ -268,15 +268,14 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int op)
{
unsigned long flags;
unsigned int ctrl_reg;
local_irq_save(flags);
ctrl_reg = __before_dc_op(op);
__before_dc_op(op);
__cache_line_loop(paddr, vaddr, sz, op);
__after_dc_op(op, ctrl_reg);
__after_dc_op(op);
local_irq_restore(flags);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment