Commit 6c75582a authored by Marcus Cooper's avatar Marcus Cooper Committed by Chen-Yu Tsai

ARM: dts: sun8i: h3: Enable USB OTG on the Beelink X2

This STB has a type A socket which acts as OTG.
Signed-off-by: default avatarMarcus Cooper <codekipper@gmail.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
parent 77c6511a
...@@ -100,6 +100,10 @@ spdif_out: spdif-out { ...@@ -100,6 +100,10 @@ spdif_out: spdif-out {
}; };
}; };
&ehci0 {
status = "okay";
};
&ehci1 { &ehci1 {
status = "okay"; status = "okay";
}; };
...@@ -147,10 +151,19 @@ &mmc2 { ...@@ -147,10 +151,19 @@ &mmc2 {
status = "okay"; status = "okay";
}; };
&ohci0 {
status = "okay";
};
&ohci1 { &ohci1 {
status = "okay"; status = "okay";
}; };
&reg_usb0_vbus {
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
status = "okay";
};
&spdif { &spdif {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pins_a>; pinctrl-0 = <&spdif_tx_pins_a>;
...@@ -163,7 +176,14 @@ &uart0 { ...@@ -163,7 +176,14 @@ &uart0 {
status = "okay"; status = "okay";
}; };
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy { &usbphy {
/* USB VBUS is on as long as VCC-IO is on */ /* USB VBUS is always on except for the OTG port */
status = "okay"; status = "okay";
usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
usb0_vbus-supply = <&reg_usb0_vbus>;
}; };
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment