Merge bk://are.twiddle.net:8080/axp-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

COPYING

@@ -307,7 +307,7 @@ convey the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) 19yy  <name of author>
+    Copyright (C) <year>  <name of author>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -329,7 +329,7 @@ Also add information on how to contact you by electronic and paper mail.
 If the program is interactive, make it output a short notice like this
 when it starts in an interactive mode:
 
-    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision version 69, Copyright (C) year name of author
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

Documentation/DocBook/kernel-locking.tmpl

@@ -788,8 +788,18 @@
     </para>
 
     <para>
-      Note that the atomic operations are defined to act as both
-      read and write barriers on all platforms.
+      Note that the atomic operations do in general not act as memory
+      barriers. Instead you can insert a memory barrier before or
+      after <function>atomic_inc()</function> or
+      <function>atomic_dec()</function> by inserting
+      <function>smp_mb__before_atomic_inc()</function>,
+      <function>smp_mb__after_atomic_inc()</function>,
+      <function>smp_mb__before_atomic_dec()</function> or
+      <function>smp_mb__after_atomic_dec()</function>
+      respectively. The advantage of using those macros instead of
+      <function>smp_mb()</function> is, that they are cheaper on some
+      platforms.    
+      <!-- Sebastian Wilhelmi <seppi@seppi.de> 2002-03-04 -->
     </para>
    </sect1>
 

Documentation/filesystems/cramfs.txt

@@ -10,7 +10,7 @@ diskspace than traditional filesystems.
 
 You can't write to a cramfs filesystem (making it compressible and
 compact also makes it _very_ hard to update on-the-fly), so you have to
-create the disk image with the "mkcramfs" utility in scripts/cramfs.
+create the disk image with the "mkcramfs" utility.
 
 
 Usage Notes
@@ -19,9 +19,7 @@ Usage Notes
 File sizes are limited to less than 16MB.
 
 Maximum filesystem size is a little over 256MB.  (The last file on the
-filesystem is allowed to extend past 256MB.)  (Comments in mkcramfs.c
-suggest that ROM sizes may be limited to 64MB, though that's not a
-limitation in cramfs code.)
+filesystem is allowed to extend past 256MB.)
 
 Only the low 8 bits of gid are stored.  The current version of
 mkcramfs simply truncates to 8 bits, which is a potential security
@@ -48,18 +46,28 @@ mind the filesystem becoming unreadable to future kernels.
 
 
 For /usr/share/magic
-------------------
+--------------------
 
-0	long	0x28cd3d45	Linux cramfs
->4	long	x		size %d
->8	long	x		flags 0x%x
->12	long	x		future 0x%x
+0	ulelong	0x28cd3d45	Linux cramfs offset 0
+>4	ulelong	x		size %d
+>8	ulelong	x		flags 0x%x
+>12	ulelong	x		future 0x%x
 >16	string	>\0		signature "%.16s"
->32	long	x		fsid.crc 0x%x
->36	long	x		fsid.edition %d
->40	long	x		fsid.blocks %d
->44	long	x		fsid.files %d
+>32	ulelong	x		fsid.crc 0x%x
+>36	ulelong	x		fsid.edition %d
+>40	ulelong	x		fsid.blocks %d
+>44	ulelong	x		fsid.files %d
 >48	string	>\0		name "%.16s"
+512	ulelong	0x28cd3d45	Linux cramfs offset 512
+>516	ulelong	x		size %d
+>520	ulelong	x		flags 0x%x
+>524	ulelong	x		future 0x%x
+>528	string	>\0		signature "%.16s"
+>544	ulelong	x		fsid.crc 0x%x
+>548	ulelong	x		fsid.edition %d
+>552	ulelong	x		fsid.blocks %d
+>556	ulelong	x		fsid.files %d
+>560	string	>\0		name "%.16s"
 
 
 Hacker Notes

Documentation/networking/arcnet-hardware.txt

@@ -2256,7 +2256,7 @@ function, and the 8th switch is used to select "compatible" or "enhanced".
 When I got my two cards, one of them had this switch set to "enhanced". That
 card didn't work at all, it wasn't even recognized by the driver. The other
 card had this switch set to "compatible" and it behaved absolutely normally. I
-guess that the switch on one of the cards, must have been changed accidently
+guess that the switch on one of the cards, must have been changed accidentally
 when the card was taken out of its former host. The question remains
 unanswered, what is the purpose of the "enhanced" position?
 

Documentation/networking/bonding.txt

@@ -503,7 +503,7 @@ The main limitations are :
 Resources and links
 ===================
 
-Current developement on this driver is posted to:
+Current development on this driver is posted to:
  - http://www.sourceforge.net/projects/bonding/
 
 Donald Becker's Ethernet Drivers and diag programs may be found at :

Documentation/networking/driver.txt

+Documents about softnet driver issues in general can be found
+at:
+
+	http://www.firstfloor.org/~andi/softnet/
+
+Transmit path guidelines:
+
+1) The hard_start_xmit method must never return '1' under any
+   normal circumstances.  It is considered a hard error unless
+   there is no way your device can tell ahead of time when it's
+   transmit function will become busy.
+
+   Instead it must maintain the queue properly.  For example,
+   for a driver implementing scatter-gather this means:
+
+	static int drv_hard_start_xmit(struct sk_buff *skb,
+		   		       struct net_device *dev)
+	{
+		struct drv *dp = dev->priv;
+
+		lock_tx(dp);
+		...
+		/* This is a hard error log it. */
+		if (TX_BUFFS_AVAIL(dp) <= (skb_shinfo(skb)->nr_frags + 1)) {
+			netif_stop_queue(dev);
+			unlock_tx(dp);
+			printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
+			       dev->name);
+			return 1;
+		}
+
+		... queue packet to card ...
+		... update tx consumer index ...
+
+		if (TX_BUFFS_AVAIL(dp) <= (MAX_SKB_FRAGS + 1))
+			netif_stop_queue(dev);
+
+		...
+		unlock_tx(dp);
+		...
+	}
+
+   And then at the end of your TX reclaimation event handling:
+
+	if (netif_queue_stopped(dp->dev) &&
+            TX_BUFFS_AVAIL(dp) > (MAX_SKB_FRAGS + 1))
+		netif_wake_queue(dp->dev);
+
+   For a non-scatter-gather supporting card, the three tests simply become:
+
+		/* This is a hard error log it. */
+		if (TX_BUFFS_AVAIL(dp) <= 0)
+
+   and:
+
+		if (TX_BUFFS_AVAIL(dp) == 0)
+
+   and:
+
+	if (netif_queue_stopped(dp->dev) &&
+            TX_BUFFS_AVAIL(dp) > 0)
+		netif_wake_queue(dp->dev);
+
+2) Do not forget to update netdev->trans_start to jiffies after
+   each new tx packet is given to the hardware.
+
+3) Do not forget that once you return 0 from your hard_start_xmit
+   method, it is your driver's responsibility to free up the SKB
+   and in some finite amount of time.
+
+   For example, this means that it is not allowed for your TX
+   mitigation scheme to let TX packets "hang out" in the TX
+   ring unreclaimed forever if no new TX packets are sent.
+   This error can deadlock sockets waiting for send buffer room
+   to be freed up.
+
+   If you return 1 from the hard_start_xmit method, you must not keep
+   any reference to that SKB and you must not attempt to free it up.
+
+Probing guidelines:
+
+1) Any hardware layer address you obtain for your device should
+   be verified.  For example, for ethernet check it with
+   linux/etherdevice.h:is_valid_ether_addr()

Documentation/networking/generic-hdlc.txt

+Generic HDLC layer for Linux kernel 2.4/2.5
+Krzysztof Halasa <khc@pm.waw.pl>
+May, 2001
+
+
+Generic HDLC layer currently supports:
+- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP),
+- raw HDLC (IPv4 only),
+- Cisco HDLC,
+- PPP (uses syncppp.c),
+- X.25 (uses X.25 routines).
+
+There are hardware drivers for the following cards:
+- C101 by Moxa Technologies Co., Ltd.
+- RISCom/N2 by SDL Communications Inc.
+- and others, some not in the official kernel.
+
+Make sure the hdlc.o and the hardware driver are loaded. It should
+create a number of "hdlc" (hdlc0 etc) network devices, one for each
+WAN port. You'll need the "sethdlc" utility, get it from:
+	http://hq.pm.waw.pl/hdlc/
+
+Compile sethdlc.c utility:
+	gcc -O2 -Wall -o sethdlc sethdlc.c
+Make sure you're using a correct version of sethdlc for your kernel.
+
+Use sethdlc to set physical interface, clock rate, HDLC mode used,
+and add any required PVCs if using Frame Relay.
+Usually you want something like:
+
+	sethdlc hdlc0 clock int rate 128000
+	sethdlc hdlc0 cisco interval 10 timeout 25
+or
+	sethdlc hdlc0 rs232 clock ext
+	sethdlc fr lmi ansi
+	sethdlc create 99
+
+In Frame Relay mode, ifconfig master hdlc device up (without assigning
+any IP address to it) before using pvc devices.
+
+
+Setting interface:
+
+* v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port
+                                if the card has software-selectable interfaces
+  loopback - activate hardware loopback (for testing only)
+* clock ext - external clock (uses DTE RX and TX clock)
+* clock int - internal clock (provides clock signal on DCE clock output)
+* clock txint - TX internal, RX external (provides TX clock on DCE output)
+* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output)
+* rate - sets clock rate in bps (not required for external clock or
+                                 for txfromrx)
+
+Setting protocol:
+
+* hdlc - sets raw HDLC (IP-only) mode
+  nrz / nrzi / fm-mark / fm-space / manchester - sets transmission code
+  no-parity / crc16 / crc16-pr0 (CRC16 with preset zeros) / crc32-itu
+  crc16-itu (CRC16 with ITU-T polynomial) / crc16-itu-pr0 - sets parity
+
+* cisco - sets Cisco HDLC mode (IP, IPv6 and IPX supported)
+  interval - time in seconds between keepalive packets
+  timeout - time in seconds after last received keepalive packet before
+            we assume the link is down
+
+* ppp - sets synchronous PPP mode
+
+* x25 - sets X.25 mode
+
+* fr - Frame Relay mode
+  lmi ansi / ccitt / none - LMI (link management) type
+  dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
+  It has nothing to do with clocks!
+  t391 - link integrity verification polling timer (in seconds) - user
+  t392 - polling verification timer (in seconds) - network
+  n391 - full status polling counter - user
+  n392 - error threshold - both user and network
+  n393 - monitored events count - both user and network
+
+* create | delete n - FR only - adds / deletes PVC interface with DLCI #n.
+
+
+
+
+Board-specific issues
+---------------------
+
+n2.o and c101.o need parameters to work (note double quotes):
+
+	insmod n2 hw='"io,irq,ram,ports[:io,irq,...]"'
+example:
+	insmod n2 hw='"0x300,10,0xD0000,01"'
+
+or
+	insmod c101 hw='"irq,ram[:irq,...]"
+example:
+	insmod c101 hw='"9,0xdc000"'
+
+If built into the kernel, these drivers need kernel (command line) parameters:
+	n2=io,irq,ram,ports:...
+or
+	c101=irq,ram:...
+
+
+
+If you have a problem with N2 or C101 card, you can issue the "private"
+command to see port's packet descriptor rings:
+
+	sethdlc hdlc0 private
+
+The hardware driver have to be build with CONFIG_HDLC_DEBUG_RINGS.
+Attaching this info to bug reports would be helpful. Anyway, let me know
+if you have problems using this.
+
+For patches and other info look at http://hq.pm.waw.pl/hdlc/

Documentation/pci.txt

@@ -156,6 +156,11 @@ if it was in suspended state. Please note that this function can fail.
 which enables the bus master bit in PCI_COMMAND register and also fixes
 the latency timer value if it's set to something bogus by the BIOS.
 
+   If you want to use the PCI Memory-Write-Invalidate transaction,
+call pci_set_mwi().  This enables bit PCI_COMMAND bit for Mem-Wr-Inval
+and also ensures that the cache line size register is set correctly.
+Make sure to check the return value of pci_set_mwi(), not all architectures
+may support Memory-Write-Invalidate.
 
 4. How to access PCI config space
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -202,6 +207,8 @@ pci_resource_end()		Returns bus end address for a given PCI region
 pci_resource_len()		Returns the byte length of a PCI region
 pci_set_drvdata()		Set private driver data pointer for a pci_dev
 pci_get_drvdata()		Return private driver data pointer for a pci_dev
+pci_set_mwi()			Enable Memory-Write-Invalidate transactions.
+pci_clear_mwi()			Disable Memory-Write-Invalidate transactions.
 
 
 7. Miscellaneous hints

Documentation/power/pci.txt

@@ -63,7 +63,7 @@ Upon entering a suspend state, the PM layer iterates through all of its register
 callbacks. This currently takes place only during APM state transitions.
 
 Upon going to sleep, the PCI subsystem walks its device tree twice. Both times, it does
-a depth first walk of the device tree. The first walk saves  each of the device's state 
+a depth first walk of the device tree. The first walk saves each of the device's state 
 and checks for devices that will prevent the system from entering a global power state. 
 The next walk then places the devices in a low power state.
 
@@ -104,7 +104,7 @@ pci_restore_state
 -----------------
 
 Usage:
-	pci_restore_state(dev,buffer);
+	pci_restore_state(dev, buffer);
 
 Description:
 	Restore previously saved config space. (First 64 bytes only);
@@ -117,7 +117,7 @@ pci_set_power_state
 -------------------
 
 Usage:
-	pci_set_power_state(dev,state);
+	pci_set_power_state(dev, state);
 
 Description:
 	Transition device to low power state using PCI PM Capabilities registers.
@@ -132,7 +132,7 @@ pci_enable_wake
 ---------------
 
 Usage:
-	pci_enable_wake(dev,state,enable);
+	pci_enable_wake(dev, state, enable);
 
 Description:
 	Enable device to generate PME# during low power state using PCI PM 
@@ -155,7 +155,7 @@ These functions are intended for use by individual drivers, and are defined in
 struct pci_driver:
 
         int  (*save_state) (struct pci_dev *dev, u32 state);
-        int  (*suspend)(struct pci_dev *dev, u32 state);
+        int  (*suspend) (struct pci_dev *dev, u32 state);
         int  (*resume) (struct pci_dev *dev);
         int  (*enable_wake) (struct pci_dev *dev, u32 state, int enable);
 
@@ -178,7 +178,7 @@ is preserved when entering D1, but the screen is placed into a low power state
 
 The driver can also interpret this function as a notification that it may be entering
 a sleep state in the near future. If it knows that the device cannot enter the 
-requested state, either because of lack of support for it, or because the devices is 
+requested state, either because of lack of support for it, or because the device is 
 middle of some critical operation, then it should fail.
 
 This function should not be used to set any state in the device or the driver because

Documentation/sound/alsa/CMIPCI.txt

+              Brief Notes on C-Media 8738/8338 Driver
+              =======================================
+
+                   Takashi Iwai <tiwai@suse.de>
+
+
+Front/Rear Multi-channel Playback
+---------------------------------
+
+CM8x38 chip can use ADC as the second DAC so that two different stereo
+channels can be used for front/rear playbacks.  Since there are two
+DACs, both streams are handled independently unlike the 4/6ch multi-
+channel playbacks in the section below.
+
+As default, ALSA driver assigns the first PCM device (i.e. hw:0,0 for
+card#0) for front and 4/6ch playbacks, while the second PCM device
+(hw:0,1) is assigned to the second DAC for rear playback.
+
+There are slight difference between two DACs.
+
+- The first DAC supports U8 and S16LE formats, while the second DAC
+  supports only S16LE.
+- The second DAC supports only two channel stereo.
+
+Please note that the CM8x38 DAC doesn't support continuous playback
+rate but only fixed rates: 5512, 8000, 11025, 16000, 22050, 32000,
+44100 and 48000 Hz.
+
+The rear output can be heard only when "Four Channel Mode" switch is
+disabled.  Otherwise no signal will be routed to the rear speakers.
+As default it's turned on.
+
+*** WARNING ***
+When "Four Channel Mode" switch is off, the output from rear speakers
+will be FULL VOLUME regardless of Master and PCM volumes.
+This might damage your audio equipment.  Please disconnect speakers
+before your turn off this switch.
+*** WARNING ***
+
+[ Well.. I once got the output with correct volume (i.e. same with the
+  front one) and was so excited.  It was even with "Four Channel" bit
+  on and "double DAC" mode.  Actually I could hear separate 4 channels
+  from front and rear speakers!  But.. after reboot, all was gone.
+  It's a very pity that I didn't save the register dump at that
+  time..  Maybe there is an unknown register to achieve this... ]
+
+If your card has an extra output jack for the rear output, the rear
+playback should be routed there as default.  If not, there is a
+control switch in the driver "Line-In As Rear", which you can change
+via alsamixer or somewhat else.  When this switch is on, line-in jack
+is used as rear output.
+
+There are two more controls regarding to the rear output.
+The "Exchange DAC" switch is used to exchange front and rear playback
+routes, i.e. the 2nd DAC is output from front output.
+
+
+4/6 Multi-Channel Playback
+--------------------------
+
+The recent CM8738 chips support for the 4/6 multi-channel playback
+function.  This is useful especially for AC3 decoding.
+
+When the multi-channel is supported, the driver name has a suffix
+"-MC" such like "CMI8738-MC6".  You can check this name from
+/proc/asound/cards.
+
+When the 4/6-ch output is enabled, the front DAC accepts up to 6 (or
+4) channels.  This is different from the dual DACs described in the
+previous section.  While the dual DAC supports two different rates or
+formats, the 4/6-ch playback supports only the same condition for all
+channels.
+
+For using 4/6 channel playback, you need to specify the PCM channels
+as you like and set the format S16LE.  For example, for playback with
+4 channels,
+
+	snd_pcm_hw_params_set_access(pcm, hw, SND_PCM_ACCESS_RW_INTERLEAVED);
+	    // or mmap if you like
+	snd_pcm_hw_params_set_format(pcm, hw, SND_PCM_FORMAT_S16_LE);
+	snd_pcm_hw_params_set_channels(pcm, hw, 4);
+
+and use the interleaved 4 channel data.
+
+There is a control switch, "Line-In As Bass".  As you can imagine from
+its name, the line-in jack is used for the bass (5th and 6th channels)
+output.
+
+
+Digital I/O
+-----------
+
+The CM8x38 provides the excellent SPDIF capability with very chip
+price (yes, that's the reason I bought the card :)
+
+The SPDIF playback and capture are done via the third PCM device
+(hw:0,2).  Usually this is assigned to the PCM device "spdif".
+The available rates are 44100 and 48000 Hz.
+For playback with aplay, you can run like below:
+
+	% aplay -Dhw:0,2 foo.wav
+
+or
+
+	% aplay -Dspdif foo.wav
+
+So far, only S16LE format is supported.  Still no 24bit.  Sorry, not
+enough info for this.
+
+The playback and capture over SPDIF use normal DAC and ADC,
+respectively, so you cannot playback both analog and digital streams
+simultaneously.
+
+To enable SPDIF output, you need to turn on "IEC958 Output Switch"
+control via mixer or alsactl.  Then you'll see the red light on from
+the card so you know that's working obviously :)
+The SPDIF input is always enabled, so you can hear SPDIF input data
+from line-out with "IEC958 In Monitor" switch at any time (see
+below).
+
+You can play via SPDIF even with the first device (hw:0,0),
+but SPDIF is enabled only when the proper format (S16LE), sample rate
+(441100 or 48000) and channels (2) are used.  Otherwise it's turned
+off.  (Also don't forget to turn on "IEC958 Output Switch", too.)
+
+
+Additionally there are relevant control switches:
+
+"IEC958 Mix Analog" - Mix analog PCM playback and FM-OPL/3 streams and
+	output through SPDIF.  This switch appears only on old chip
+	models (CM8738 033 and 037).
+	Note: without this control you can output PCM to SPDIF.
+	This is "mixing" of streams, so e.g. it's not for AC3 output
+	(see the next section).
+
+"IEC958 In Select"  - Select SPDIF input, the internal CD-in (false)
+	and the external input (true).  This switch appears only on
+	the chip models 039 or later.
+
+"IEC958 Loop"       - SPDIF input data is loop back into SPDIF
+	output (aka bypass)
+
+"IEC958 Copyright"  - Set the copyright bit.
+
+"IEC958 5V"         - Select 0.5V (coax) or 5V (optical) interface.
+	On some cards this doesn't work and you need to change the
+	configuration with hardware dip-switch.
+
+"IEC958 In Monitor" - SPDIF input is routed to DAC.
+
+"IEC958 In Phase Inverse" - Set SPDIF input format as inverse.
+	[FIXME: this doesn't work on all chips..]
+
+"IEC958 In Valid"   - Set input validity flag detection.
+
+Note: When "PCM Playback Switch" is on, you'll hear the digital output
+stream through analog line-out.
+
+
+The AC3 (RAW DIGITAL) OUTPUT
+----------------------------
+
+The driver supports raw digital (typically AC3) i/o over SPDIF.  This
+can be toggled via IEC958 playback control, but usually you need to
+access it via alsa-lib.  See alsa-lib documents for more details.
+
+On the raw digital mode, the "PCM Playback Switch" is automatically
+turned off so that non-audio data is heard from the analog line-out.
+Similarly the following switches are off: "IEC958 Mix Analog" and
+"IEC958 Loop".  The switches are resumed after closing the SPDIF PCM
+device automatically to the previous state.
+
+
+ANALOG MIXER INTERFACE
+----------------------
+
+The mixer interface on CM8x38 is similar to SB16.
+There are Master, PCM, Synth, CD, Line, Mic and PC Speaker playback
+volumes.  Synth, CD, Line and Mic have playback and capture switches,
+too, as well as SB16.
+
+In addition to the standard SB mixer, CM8x38 provides more functions.
+- PCM playback switch
+- PCM capture switch (to capture the data sent to DAC)
+- Mic Boost switch
+- Mic capture volume
+- Aux playback volume/switch and capture switch
+- 3D control switch
+
+
+MIDI CONTROLLER
+---------------
+
+The MPU401-UART interface is enabled as default only for the first
+(CMIPCI) card.  You need to set module option "snd_midi_port" properly
+for the 2nd (CMIPCI) card.
+
+There is _no_ hardware wavetable function on this chip (except for
+OPL3 synth below).
+What's said as MIDI synth on Windows is a software synthesizer
+emulation.  On Linux use TiMidity or other softsynth program for
+playing MIDI music.
+
+
+FM OPL/3 Synth
+--------------
+
+The FM OPL/3 is also enabled as default only for the first card.
+Set "snd_fm_port" module option for more cards.
+
+The output quality of FM OPL/3 is, however, very weird.
+I don't know why..
+
+
+Joystick and Modem
+------------------
+
+The joystick and modem should be available by enabling the control
+switch "Joystick" and "Modem" respectively.  But I myself have never
+tested them yet.
+
+
+Debugging Information
+---------------------
+
+The registers are shown in /proc/asound/cardX/cmipci.  If you have any
+problem (especially unexpected behavior of mixer), please attach the
+output of this proc file together with the bug report.

Documentation/sound/OPL3-SA2 → Documentation/sound/oss/OPL3-SA2

@@ -65,7 +65,7 @@ Plug 'n Play
 ------------
 
 In previous kernels (2.2.x), some configuration was required to
-get the driver to talk to the card.  Being the new millenium and
+get the driver to talk to the card.  Being the new millennium and
 all, the 2.4.x kernels now support auto-configuration if ISA PnP
 support is configured in.  Theoretically, the driver even supports
 having more than one card in this case.

Documentation/sound/README.OSS → Documentation/sound/oss/README.OSS

@@ -542,7 +542,7 @@ Yamaha OPL3-SA1
 
 	SoftOSS keeps the samples loaded on the system's RAM so much RAM is
 	required. SoftOSS should never be used on machines with less than 16 MB
-	of RAM since this is potentially dangerous (you may accidently run out
+	of RAM since this is potentially dangerous (you may accidentally run out
 	of memory which probably crashes the machine). 
 
 	SoftOSS implements the wave table API originally designed for GUS. For

Documentation/usb/ov511.txt

@@ -182,9 +182,9 @@ MODULE PARAMETERS:
   DEFAULT: 1 (Always on)
   DESC: Controls whether the LED (the little light) on the front of the camera
 	is always off (0), always on (1), or only on when driver is open (2).
-	This is only supported with the OV511+ chipset, and even then only on
-	some cameras (ones that actually have the LED wired to the control pin,
-	and not just hardwired to be on all the time).
+	This is not supported with the OV511, and might only work with certain
+	cameras (ones that actually have the LED wired to the control pin, and
+	not just hard-wired to be on all the time).
 
   NAME: dump_bridge
   TYPE: integer (Boolean)

MAINTAINERS

@@ -1606,6 +1606,12 @@ L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
+USB EHCI DRIVER
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb-devel@lists.sourceforge.net
+S:	Maintained
+
 USB HID/HIDBP/INPUT DRIVERS
 P:	Vojtech Pavlik
 M:	vojtech@suse.cz
@@ -1739,6 +1745,12 @@ L:	linux-usb-devel@lists.sourceforge.net
 W:	http://usb.in.tum.de
 S:	Maintained
 	
+USB "USBNET" DRIVER
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb-devel@lists.sourceforge.net
+S:	Maintained
+
 VFAT FILESYSTEM:
 P:	Gordon Chaffee
 M:	chaffee@cs.berkeley.edu

Makefile

 VERSION = 2
 PATCHLEVEL = 5
 SUBLEVEL = 6
-EXTRAVERSION =-pre2
+EXTRAVERSION =-pre3
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 
@@ -162,6 +162,7 @@ DRIVERS-$(CONFIG_MTD) += drivers/mtd/mtdlink.o
 DRIVERS-$(CONFIG_PCMCIA) += drivers/pcmcia/pcmcia.o
 DRIVERS-$(CONFIG_NET_PCMCIA) += drivers/net/pcmcia/pcmcia_net.o
 DRIVERS-$(CONFIG_NET_WIRELESS) += drivers/net/wireless/wireless_net.o
+DRIVERS-$(CONFIG_NET_TULIP) += drivers/net/tulip/tulip_net.o
 DRIVERS-$(CONFIG_PCMCIA_CHRDEV) += drivers/char/pcmcia/pcmcia_char.o
 DRIVERS-$(CONFIG_DIO) += drivers/dio/dio.a
 DRIVERS-$(CONFIG_SBUS) += drivers/sbus/sbus_all.o

arch/alpha/defconfig

@@ -237,7 +237,6 @@ CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes
@@ -250,7 +249,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_IDEDMA_ONLYDISK is not set
 CONFIG_BLK_DEV_IDEDMA=y

arch/alpha/kernel/entry.S

@@ -495,7 +495,7 @@ alpha_switch_to:
 	ret	$31,($26),1
 .end alpha_switch_to
 
-#ifdef CONFIG_SMP
+#if CONFIG_SMP || CONFIG_PREEMPT
 .globl  ret_from_fork
 .align 3
 .ent ret_from_fork

arch/arm/config.in

@@ -682,7 +682,6 @@ comment 'Kernel hacking'
 bool 'Compile kernel without frame pointer' CONFIG_NO_FRAME_POINTER
 bool 'Verbose user fault messages' CONFIG_DEBUG_USER
 bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO
-dep_bool 'Disable pgtable cache' CONFIG_NO_PGT_CACHE $CONFIG_CPU_26
 
 bool 'Kernel debugging' CONFIG_DEBUG_KERNEL
 dep_bool '  Debug memory allocations' CONFIG_DEBUG_SLAB $CONFIG_DEBUG_KERNEL

arch/arm/def-configs/shannon

@@ -378,7 +378,6 @@ CONFIG_BLK_DEV_IDE=m
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes

arch/arm/kernel/armksyms.c

@@ -167,10 +167,6 @@ EXPORT_SYMBOL(__virt_to_bus);
 #endif
 #ifndef __bus_to_virt__is_a_macro
 EXPORT_SYMBOL(__bus_to_virt);
-#endif
-
-#ifndef CONFIG_NO_PGT_CACHE
-EXPORT_SYMBOL(quicklists);
 #endif
 
 	/* string / mem functions */

arch/arm/kernel/process.c

@@ -95,9 +95,6 @@ void cpu_idle(void)
 			idle();
 		leds_event(led_idle_end);
 		schedule();
-#ifndef CONFIG_NO_PGT_CACHE
-		check_pgt_cache();
-#endif
 	}
 }
 

arch/arm/mach-adifcc/mm.c

@@ -14,7 +14,7 @@
 
 static struct map_desc adifcc_io_desc[] __initdata = {
  /* on-board devices */
- { 0xff400000,   0x00400000,   0x00300000,   DOMAIN_IO, 1, 1, 0, 0},
+ { 0xff400000,   0x00400000,   0x00300000,   DOMAIN_IO, 0, 1, 0, 0},
  LAST_DESC
 };
 

arch/arm/mach-anakin/mm.c

@@ -20,7 +20,7 @@
 
 static struct map_desc anakin_io_desc[] __initdata = {
 	{ IO_BASE,    IO_START,    IO_SIZE,    DOMAIN_IO, 0, 1, 0, 0 },
-	{ FLASH_BASE, FLASH_START, FLASH_SIZE, DOMAIN_IO, 1, 1, 0, 0 },
+	{ FLASH_BASE, FLASH_START, FLASH_SIZE, DOMAIN_IO, 0, 1, 0, 0 },
 	{ VGA_BASE,   VGA_START,   VGA_SIZE,   DOMAIN_IO, 0, 1, 0, 0 },
 	LAST_DESC
 };

arch/arm/mach-arc/mm.c

@@ -78,15 +78,16 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	if (!new_pmd)
 		goto no_pmd;
 
-	new_pte = pte_alloc(mm, new_pmd, 0);
+	new_pte = pte_alloc_map(mm, new_pmd, 0);
 	if (!new_pte)
 		goto no_pte;
 
 	init_pgd = pgd_offset_k(0);
 	init_pmd = pmd_offset(init_pgd, 0);
-	init_pte = pte_offset(init_pmd, 0);
-
+	init_pte = pte_offset_map_nested(init_pmd, 0);
 	set_pte(new_pte, *init_pte);
+	pte_unmap_nested(init_pte);
+	pte_unmap(new_pte);
 
 	/*
 	 * most of the page table entries are zeroed

arch/arm/mach-clps711x/autcpu12.c

@@ -51,7 +51,7 @@ static struct map_desc autcpu12_io_desc[] __initdata = {
  /* virtual, physical, length, domain, r, w, c, b */
  /* memory-mapped extra io and CS8900A Ethernet chip */
  /* ethernet chip */
- 	{ AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, DOMAIN_IO, 1, 1, 0, 0 },
+ 	{ AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, DOMAIN_IO, 0, 1, 0, 0 },
 	
  	LAST_DESC
 };

arch/arm/mach-clps711x/edb7211-mm.c

@@ -56,12 +56,12 @@ static struct map_desc edb7211_io_desc[] __initdata = {
  /* virtual, physical, length, domain, r, w, c, b */
 
  /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, MB1, DOMAIN_IO, 1, 1, 0, 0 }, 
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, MB1, DOMAIN_IO, 1, 1, 0, 0 },
+ { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, MB1, DOMAIN_IO, 0, 1, 0, 0 }, 
+ { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, MB1, DOMAIN_IO, 0, 1, 0, 0 },
 
  /* flash banks */
- { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, MB1 * 8, DOMAIN_KERNEL, 1, 1, 0, 0 },
- { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, MB1 * 8, DOMAIN_KERNEL, 1, 1, 0, 0 },
+ { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, MB1 * 8, DOMAIN_KERNEL, 0, 1, 0, 0 },
+ { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, MB1 * 8, DOMAIN_KERNEL, 0, 1, 0, 0 },
 
  LAST_DESC
 };

arch/arm/mach-sa1100/adsbitsy.c

@@ -125,7 +125,7 @@ fixup_adsbitsy(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc adsbitsy_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf4000000, 0x18000000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA1111 */
+  { 0xf4000000, 0x18000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA1111 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/assabet.c

@@ -230,8 +230,8 @@ fixup_assabet(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc assabet_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf1000000, 0x12000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* Board Control Register */
-  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* MQ200 */
+  { 0xf1000000, 0x12000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
+  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */
   /*  f3000000 - neponset system registers */
   /*  f4000000 - neponset SA1111 registers */
   LAST_DESC

arch/arm/mach-sa1100/cerf.c

@@ -64,11 +64,11 @@ fixup_cerf(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc cerf_io_desc[] __initdata = {
   /* virtual	 physical    length	 domain     r  w  c  b */
-  { 0xf0000000, 0x08000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* Crystal Ethernet Chip */
+  { 0xf0000000, 0x08000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Crystal Ethernet Chip */
 #ifdef CONFIG_SA1100_CERF_CPLD
-  { 0xf1000000, 0x40000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* CPLD Chip */
-  { 0xf2000000, 0x10000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* CerfPDA Bluetooth */
-  { 0xf3000000, 0x18000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* CerfPDA Serial */
+  { 0xf1000000, 0x40000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD Chip */
+  { 0xf2000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* CerfPDA Bluetooth */
+  { 0xf3000000, 0x18000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* CerfPDA Serial */
 #endif
   LAST_DESC
 };

arch/arm/mach-sa1100/empeg.c

@@ -31,7 +31,7 @@ fixup_empeg(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc empeg_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { EMPEG_FLASHBASE, 0x00000000, 0x00200000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash */
+  { EMPEG_FLASHBASE, 0x00000000, 0x00200000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/flexanet.c

@@ -172,10 +172,10 @@ fixup_flexanet(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc flexanet_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf0000000, 0x10000000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* Board Control Register */
-  { 0xf1000000, 0x18000000, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Ethernet controller */
-  { 0xD0000000, 0x40000000, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Instrument boards */
-  { 0xD8000000, 0x48000000, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* External peripherals */
+  { 0xf0000000, 0x10000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
+  { 0xf1000000, 0x18000000, 0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Ethernet controller */
+  { 0xD0000000, 0x40000000, 0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Instrument boards */
+  { 0xD8000000, 0x48000000, 0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* External peripherals */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/freebird.c

@@ -66,8 +66,8 @@ fixup_freebird(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc freebird_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf0000000, 0x12000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* Board Control Register */
-  { 0xf2000000, 0x19000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0},
+  { 0xf0000000, 0x12000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
+  { 0xf2000000, 0x19000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0},
    LAST_DESC
 };
 

arch/arm/mach-sa1100/graphicsclient.c

@@ -32,67 +32,62 @@
  * Handlers for GraphicsClient's external IRQ logic
  */
 
-static void ADS_IRQ_demux( int irq, void *dev_id, struct pt_regs *regs )
+static void
+gc_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 {
-	int i;
+	unsigned int mask;
+
+	while ((mask = ADS_INT_ST1 | (ADS_INT_ST2 << 8))) {
+		/* clear the parent IRQ */
+		GEDR = GPIO_GPIO0;
 
-	while( (irq = ADS_INT_ST1 | (ADS_INT_ST2 << 8)) ){
-		for( i = 0; i < 16; i++ )
-			if( irq & (1<<i) )
-				do_IRQ( ADS_EXT_IRQ(i), regs );
+		irq = ADS_EXT_IRQ(0);
+		desc = irq_desc + irq;
+
+		do {
+			if (mask & 1)
+				desc->handle(irq, desc, regs);
+			mask >>= 1;
+			irq++;
+			desc++;
+		} while (mask);
 	}
 }
 
-static struct irqaction ADS_ext_irq = {
-	name:		"ADS_ext_IRQ",
-	handler:	ADS_IRQ_demux,
-	flags:		SA_INTERRUPT
-};
-
-static void ADS_mask_and_ack_irq0(unsigned int irq)
+static void gc_mask_irq1(unsigned int irq)
 {
 	int mask = (1 << (irq - ADS_EXT_IRQ(0)));
 	ADS_INT_EN1 &= ~mask;
 	ADS_INT_ST1 = mask;
 }
 
-static void ADS_mask_irq0(unsigned int irq)
-{
-	ADS_INT_ST1 = (1 << (irq - ADS_EXT_IRQ(0)));
-}
-
-static void ADS_unmask_irq0(unsigned int irq)
+static void gc_unmask_irq1(unsigned int irq)
 {
 	ADS_INT_EN1 |= (1 << (irq - ADS_EXT_IRQ(0)));
 }
 
-static struct irqchip ADS0_chip = {
-	ack:	ADS_mask_and_ack_irq0,
-	mask:	ADS_mask_irq0,
-	unmask:	ADS_unmask_irq0,
+static struct irqchip gc_irq1_chip = {
+	ack:	gc_mask_irq1,
+	mask:	gc_mask_irq1,
+	unmask:	gc_unmask_irq1,
 };
 
-static void ADS_mask_and_ack_irq1(unsigned int irq)
+static void gc_mask_irq2(unsigned int irq)
 {
 	int mask = (1 << (irq - ADS_EXT_IRQ(8)));
 	ADS_INT_EN2 &= ~mask;
 	ADS_INT_ST2 = mask;
 }
 
-static void ADS_mask_irq1(unsigned int irq)
-{
-	ADS_INT_ST2 = (1 << (irq - ADS_EXT_IRQ(8)));
-}
-
-static void ADS_unmask_irq1(unsigned int irq)
+static void gc_unmask_irq2(unsigned int irq)
 {
 	ADS_INT_EN2 |= (1 << (irq - ADS_EXT_IRQ(8)));
 }
 
-static struct irqchip ADS1_chip = {
-	ack:	ADS_mask_and_ack_irq1,
-	mask:	ADS_mask_irq1,
-	unmask:	ADS_unmask_irq1,
+static struct irqchip gc_irq2_chip = {
+	ack:	gc_mask_irq2,
+	mask:	gc_mask_irq2,
+	unmask:	gc_unmask_irq2,
 };
 
 static void __init graphicsclient_init_irq(void)
@@ -105,22 +100,23 @@ static void __init graphicsclient_init_irq(void)
 	/* disable all IRQs */
 	ADS_INT_EN1 = 0;
 	ADS_INT_EN2 = 0;
+
 	/* clear all IRQs */
 	ADS_INT_ST1 = 0xff;
 	ADS_INT_ST2 = 0xff;
 
 	for (irq = ADS_EXT_IRQ(0); irq <= ADS_EXT_IRQ(7); irq++) {
-		set_irq_chip(irq, &ADS0_chip);
+		set_irq_chip(irq, &gc_irq1_chip);
 		set_irq_handler(irq, do_level_IRQ);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	for (irq = ADS_EXT_IRQ(8); irq <= ADS_EXT_IRQ(15); irq++) {
-		set_irq_chip(irq, &ADS1_chip);
+		set_irq_chip(irq, &gc_irq2_chip);
 		set_irq_handler(irq, do_level_IRQ);
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
-	set_GPIO_IRQ_edge(GPIO_GPIO0, GPIO_FALLING_EDGE);
-	setup_arm_irq( IRQ_GPIO0, &ADS_ext_irq );
+	set_irq_type(IRQ_GPIO0, IRQT_FALLING);
+	set_irq_chained_handler(IRQ_GPIO0, gc_irq_handler);
 }
 
 
@@ -148,111 +144,6 @@ static struct map_desc graphicsclient_io_desc[] __initdata = {
   LAST_DESC
 };
 
-static struct gc_uart_ctrl_data_t gc_uart_ctrl_data[] = {
-  { GPIO_GC_UART0_CTS, 0, NULL,NULL },
-  { GPIO_GC_UART1_CTS, 0, NULL,NULL },
-  { GPIO_GC_UART2_CTS, 0, NULL,NULL }
-};
-
-#error Old code.  Someone needs to decide what to do with this
-#if 0 
-static void
-graphicsclient_cts_intr(int irq, void *dev_id, struct pt_regs *regs)
-{
-	struct gc_uart_ctrl_data_t * uart_data = (struct gc_uart_ctrl_data_t *)dev_id;
-	int cts = !(GPLR & uart_data->cts_gpio);
-
-	/* NOTE: I supose that we will no get any interrupt
-	   if the GPIO is not changed, so maybe
-	   the cts_prev_state can be removed ... */
-	if (cts != uart_data->cts_prev_state) {
-		uart_data->cts_prev_state = cts;
-
-		uart_handle_cts_change(uart_data->info, cts);
-	}
-}
-
-static int
-graphicsclient_register_cts_intr(int gpio, int irq,
-				 struct gc_uart_ctrl_data_t *uart_data)
-{
-	int ret = 0;
-
-	set_GPIO_IRQ_edge(gpio, GPIO_BOTH_EDGES);
-
-	ret = request_irq(irq, graphicsclient_cts_intr,
-			  0, "GC RS232 CTS", uart_data);
-	if (ret) {
-		printk(KERN_ERR "uart_open: failed to register CTS irq (%d)\n",
-		       ret);
-		free_irq(irq, uart_data);
-	}
-
-	return ret;
-}
-
-static int
-graphicsclient_uart_open(struct uart_port *port, struct uart_info *info)
-{
-	int ret = 0;
-
-	if (port->mapbase == _Ser1UTCR0) {
-		Ser1SDCR0 |= SDCR0_UART;
-		/* Set RTS Output */
-		GPSR  = GPIO_GC_UART0_RTS;
-
-		gc_uart_ctrl_data[0].cts_prev_state = 0;
-		gc_uart_ctrl_data[0].info = info;
-		gc_uart_ctrl_data[0].port = port;
-
-		/* register uart0 CTS irq */
-		ret = graphicsclient_register_cts_intr(GPIO_GC_UART0_CTS,
-							IRQ_GC_UART0_CTS,
-							&gc_uart_ctrl_data[0]);
-	} else if (port->mapbase == _Ser2UTCR0) {
-		Ser2UTCR4 = Ser2HSCR0 = 0;
-		/* Set RTS Output */
-		GPSR  = GPIO_GC_UART1_RTS;
-
-		gc_uart_ctrl_data[1].cts_prev_state = 0;
-		gc_uart_ctrl_data[1].info = info;
-		gc_uart_ctrl_data[1].port = port;
-
-		/* register uart1 CTS irq */
-		ret = graphicsclient_register_cts_intr(GPIO_GC_UART1_CTS,
-							IRQ_GC_UART1_CTS,
-							&gc_uart_ctrl_data[1]);
-	} else if (port->mapbase == _Ser3UTCR0) {
-		/* Set RTS Output */
-		GPSR =	GPIO_GC_UART2_RTS;
-
-		gc_uart_ctrl_data[2].cts_prev_state = 0;
-		gc_uart_ctrl_data[2].info = info;
-		gc_uart_ctrl_data[2].port = port;
-
-		/* register uart2 CTS irq */
-		ret = graphicsclient_register_cts_intr(GPIO_GC_UART2_CTS,
-							IRQ_GC_UART2_CTS,
-							&gc_uart_ctrl_data[2]);
-	}
-	return ret;
-}
-
-static int
-graphicsclient_uart_close(struct uart_port *port, struct uart_info *info)
-{
-	if (port->mapbase == _Ser1UTCR0) {
-		free_irq(IRQ_GC_UART0_CTS, &gc_uart_ctrl_data[0]);
-	} else if (port->mapbase == _Ser2UTCR0) {
-		free_irq(IRQ_GC_UART1_CTS, &gc_uart_ctrl_data[1]);
-	} else if (port->mapbase == _Ser3UTCR0) {
-		free_irq(IRQ_GC_UART2_CTS, &gc_uart_ctrl_data[2]);
-	}
-
-	return 0;
-}
-#endif
-
 static u_int graphicsclient_get_mctrl(struct uart_port *port)
 {
 	u_int result = TIOCM_CD | TIOCM_DSR;

arch/arm/mach-sa1100/graphicsmaster.c

@@ -93,68 +93,62 @@ __initcall(graphicsmaster_init);
  * Handlers for GraphicsMaster's external IRQ logic
  */
 
-static void ADS_IRQ_demux( int irq, void *dev_id, struct pt_regs *regs )
+static void
+gm_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 {
-	int i;
-
-	while( (irq = ADS_INT_ST1 | (ADS_INT_ST2 << 8)) ){
-		for( i = 0; i < 16; i++ )
-			if( irq & (1<<i) ) {
-				do_IRQ( ADS_EXT_IRQ(i), regs );
-			}
+	unsigned int mask;
+
+	while ((mask = ADS_INT_ST1 | (ADS_INT_ST2 << 8))) {
+		/* clear the parent IRQ */
+		GEDR = GPIO_GPIO0;
+
+		irq = ADS_EXT_IRQ(0);
+		desc = irq_desc + irq;
+
+		do {
+			if (mask & 1)
+				desc->handle(irq, desc, regs);
+			mask >>= 1;
+			irq++;
+			desc++;
+		} while (mask);
 	}
 }
 
-static struct irqaction ADS_ext_irq = {
-	name:		"ADS_ext_IRQ",
-	handler:	ADS_IRQ_demux,
-	flags:		SA_INTERRUPT
-};
-
-static void ADS_mask_and_ack_irq0(unsigned int irq)
+static void gm_mask_irq1(unsigned int irq)
 {
 	int mask = (1 << (irq - ADS_EXT_IRQ(0)));
 	ADS_INT_EN1 &= ~mask;
 	ADS_INT_ST1 = mask;
 }
 
-static void ADS_mask_irq0(unsigned int irq)
-{
-	ADS_INT_ST1 = (1 << (irq - ADS_EXT_IRQ(0)));
-}
-
-static void ADS_unmask_irq0(unsigned int irq)
+static void gm_unmask_irq1(unsigned int irq)
 {
 	ADS_INT_EN1 |= (1 << (irq - ADS_EXT_IRQ(0)));
 }
 
-static struct irqchip ADS0_chip = {
-	ack:	ADS_mask_and_ack_irq0,
-	mask:	ADS_mask_irq0,
-	unmask:	ADS_unmask_irq0,
+static struct irqchip gm_irq1_chip = {
+	ack:	gm_mask_irq1,
+	mask:	gm_mask_irq1,
+	unmask:	gm_unmask_irq1,
 };
 
-static void ADS_mask_and_ack_irq1(unsigned int irq)
+static void gm_mask_irq2(unsigned int irq)
 {
 	int mask = (1 << (irq - ADS_EXT_IRQ(8)));
 	ADS_INT_EN2 &= ~mask;
 	ADS_INT_ST2 = mask;
 }
 
-static void ADS_mask_irq1(unsigned int irq)
-{
-	ADS_INT_ST2 = (1 << (irq - ADS_EXT_IRQ(8)));
-}
-
-static void ADS_unmask_irq1(unsigned int irq)
+static void gm_unmask_irq2(unsigned int irq)
 {
 	ADS_INT_EN2 |= (1 << (irq - ADS_EXT_IRQ(8)));
 }
 
-static struct irqchip ADS1_chip = {
-	ack:	ADS_mask_irq1,
-	mask:	ADS_mask_irq1,
-	unmask:	ADS_mask_irq1,
+static struct irqchip gm_irq2_chip = {
+	ack:	gm_mask_irq2,
+	mask:	gm_mask_irq2,
+	unmask:	gm_unmask_irq2,
 };
 
 static void __init graphicsmaster_init_irq(void)
@@ -167,22 +161,23 @@ static void __init graphicsmaster_init_irq(void)
 	/* disable all IRQs */
 	ADS_INT_EN1 = 0;
 	ADS_INT_EN2 = 0;
+
 	/* clear all IRQs */
 	ADS_INT_ST1 = 0xff;
 	ADS_INT_ST2 = 0xff;
 
 	for (irq = ADS_EXT_IRQ(0); irq <= ADS_EXT_IRQ(7); irq++) {
-		set_irq_chip(irq, &ADS0_chip);
+		set_irq_chip(irq, &gm_irq1_chip);
 		set_irq_handler(irq, do_level_IRQ);
 		set_irq_flags(irq, IRQF_PROBE | IRQF_VALID);
 	}
 	for (irq = ADS_EXT_IRQ(8); irq <= ADS_EXT_IRQ(15); irq++) {
-		set_irq_chip(irq, &ADS1_chip);
+		set_irq_chip(irq, &gm_irq2_chip);
 		set_irq_handler(irq, do_level_IRQ);
 		set_irq_flags(irq, IRQF_PROBE | IRQF_VALID);
 	}
-	set_GPIO_IRQ_edge(GPIO_GPIO0, GPIO_FALLING_EDGE);
-	setup_arm_irq( IRQ_GPIO0, &ADS_ext_irq );
+	set_irq_type(IRQ_GPIO0, IRQT_FALLING);
+	set_irq_chained_handler(IRQ_GPIO0, gm_irq_handler);
 }
 
 
@@ -206,9 +201,9 @@ fixup_graphicsmaster(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc graphicsmaster_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf0000000, 0x10000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* CPLD */
-  { 0xf1000000, 0x40000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* CAN */
-  { 0xf4000000, 0x18000000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA-1111 */
+  { 0xf0000000, 0x10000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
+  { 0xf1000000, 0x40000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* CAN */
+  { 0xf4000000, 0x18000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA-1111 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/h3600.c

@@ -489,9 +489,9 @@ static struct sa1100_port_fns h3600_port_fns __initdata = {
 
 static struct map_desc h3600_io_desc[] __initdata = {
  /* virtual	       physical    length      domain	  r  w	c  b */
-  { H3600_EGPIO_VIRT,  0x49000000, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* EGPIO 0		 CS#5 */
-  { H3600_BANK_2_VIRT, 0x10000000, 0x02800000, DOMAIN_IO, 1, 1, 0, 0 }, /* static memory bank 2  CS#2 */
-  { H3600_BANK_4_VIRT, 0x40000000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* static memory bank 4  CS#4 */
+  { H3600_EGPIO_VIRT,  0x49000000, 0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* EGPIO 0		 CS#5 */
+  { H3600_BANK_2_VIRT, 0x10000000, 0x02800000, DOMAIN_IO, 0, 1, 0, 0 }, /* static memory bank 2  CS#2 */
+  { H3600_BANK_4_VIRT, 0x40000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* static memory bank 4  CS#4 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/huw_webpanel.c

@@ -77,7 +77,7 @@ fixup_huw_webpanel(struct machine_desc *desc, struct param_struct *params,
 **/
 static struct map_desc huw_webpanel_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf0000000, 0xc1fb8000, 0x00048000, DOMAIN_IO, 1, 1, 0, 0 }, /* Parameter */
+  { 0xf0000000, 0xc1fb8000, 0x00048000, DOMAIN_IO, 0, 1, 0, 0 }, /* Parameter */
   { 0xf1000000, 0x18000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Paules CS3, write only */
   LAST_DESC
 };

arch/arm/mach-sa1100/itsy.c

@@ -31,8 +31,8 @@ fixup_itsy(struct machine_desc *desc, struct param_struct *params,
    likely wrong. */
 static struct map_desc itsy_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash bank 0 */
-  { 0xf0000000, 0x49000000, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* EGPIO 0 */
+  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
+  { 0xf0000000, 0x49000000, 0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* EGPIO 0 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/jornada720.c

@@ -66,9 +66,9 @@ fixup_jornada720(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc jornada720_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf0000000, 0x48000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* Epson registers */
-  { 0xf1000000, 0x48200000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* Epson frame buffer */
-  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA-1111 */
+  { 0xf0000000, 0x48000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Epson registers */
+  { 0xf1000000, 0x48200000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Epson frame buffer */
+  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA-1111 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/lart.c

@@ -18,8 +18,8 @@
 
 static struct map_desc lart_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* main flash memory */
-  { 0xec000000, 0x08000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* main flash, alternative location */
+  { 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* main flash memory */
+  { 0xec000000, 0x08000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* main flash, alternative location */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/nanoengine.c

@@ -34,9 +34,9 @@ fixup_nanoengine(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc nanoengine_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash bank 0 */
-  { 0xf0000000, 0x10000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* System Registers */
-  { 0xf1000000, 0x18A00000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* Internal PCI Config Space */
+  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
+  { 0xf0000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* System Registers */
+  { 0xf1000000, 0x18A00000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Internal PCI Config Space */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/neponset.c

@@ -184,8 +184,8 @@ __initcall(neponset_init);
 
 static struct map_desc neponset_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf3000000, 0x10000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* System Registers */
-  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA-1111 */
+  { 0xf3000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* System Registers */
+  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA-1111 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/omnimeter.c

@@ -54,7 +54,7 @@ fixup_omnimeter(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc omnimeter_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xd2000000, 0x10000000, 0x02000000, DOMAIN_IO, 1, 1, 0, 0 }, /* TS */
+  { 0xd2000000, 0x10000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* TS */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/pangolin.c

@@ -30,7 +30,7 @@ fixup_pangolin(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc pangolin_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* MQ200 */
+  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/pfs168.c

@@ -103,20 +103,20 @@ fixup_pfs168(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc pfs168_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash bank 0 */
-  { 0xf0000000, 0x10000000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* 16C752 DUART port A (COM5) */
-  { 0xf0001000, 0x10800000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* 16C752 DUART port B (COM6) */
-  { 0xf0002000, 0x11000000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* COM1 RTS control (SYSC1RTS) */
-  { 0xf0003000, 0x11400000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* Status LED control (SYSLED) */
-  { 0xf0004000, 0x11800000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* DTMF code read (SYSDTMF) */
-  { 0xf0005000, 0x11c00000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* LCD configure, enable (SYSLCDDE) */
-  { 0xf0006000, 0x12000000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* COM1 DSR and motion sense (SYSC1DSR) */
-  { 0xf0007000, 0x12800000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* COM3 xmit enable (SYSC3TEN) */
-  { 0xf0008000, 0x13000000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* Control register A (SYSCTLA) */
-  { 0xf0009000, 0x13800000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* Control register B (SYSCTLB) */
-  { 0xf000a000, 0x18000000, 0x00001000, DOMAIN_IO, 1, 1, 0, 0 }, /* SMC91C96 */
-  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* MQ200 */
-  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA-1111 */
+  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
+  { 0xf0000000, 0x10000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* 16C752 DUART port A (COM5) */
+  { 0xf0001000, 0x10800000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* 16C752 DUART port B (COM6) */
+  { 0xf0002000, 0x11000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* COM1 RTS control (SYSC1RTS) */
+  { 0xf0003000, 0x11400000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* Status LED control (SYSLED) */
+  { 0xf0004000, 0x11800000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* DTMF code read (SYSDTMF) */
+  { 0xf0005000, 0x11c00000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* LCD configure, enable (SYSLCDDE) */
+  { 0xf0006000, 0x12000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* COM1 DSR and motion sense (SYSC1DSR) */
+  { 0xf0007000, 0x12800000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* COM3 xmit enable (SYSC3TEN) */
+  { 0xf0008000, 0x13000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* Control register A (SYSCTLA) */
+  { 0xf0009000, 0x13800000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* Control register B (SYSCTLB) */
+  { 0xf000a000, 0x18000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* SMC91C96 */
+  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */
+  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA-1111 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/pleb.c

@@ -35,8 +35,8 @@ fixup_pleb(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc pleb_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* main flash memory */
-  { 0xe8400000, 0x08000000, 0x00400000, DOMAIN_IO, 1, 1, 0, 0 }, /* main flash, alternative location */
+  { 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* main flash memory */
+  { 0xe8400000, 0x08000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* main flash, alternative location */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/simpad.c

@@ -58,7 +58,7 @@ fixup_simpad(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc simpad_io_desc[] __initdata = {
   /* virtual	physical    length	domain	   r  w  c  b */
-  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* MQ200 */  
+  { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */  
   { 0xf1000000, 0x18000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Paules CS3, write only */
   LAST_DESC
 };

arch/arm/mach-sa1100/stork.c

@@ -305,10 +305,10 @@ stork_kbd_unexpected_up(unsigned char code)
 
 struct map_desc stork_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash bank 0 */
-  { STORK_VM_BASE_CS1, STORK_VM_OFF_CS1, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* EGPIO 0 */
-  { 0xf1000000, 0x10000000, 0x02800000, DOMAIN_IO, 1, 1, 0, 0 }, /* static memory bank 2 */
-  { 0xf3800000, 0x40000000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* static memory bank 4 */
+  { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
+  { STORK_VM_BASE_CS1, STORK_VM_OFF_CS1, 0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* EGPIO 0 */
+  { 0xf1000000, 0x10000000, 0x02800000, DOMAIN_IO, 0, 1, 0, 0 }, /* static memory bank 2 */
+  { 0xf3800000, 0x40000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* static memory bank 4 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/system3.c

@@ -58,6 +58,7 @@
 
 #include "generic.h"
 #include "sa1111.h"
+#include <asm/hardware/sa1111.h>
 
 #define DEBUG 1
 
@@ -74,19 +75,17 @@
 /* init funcs */
 static void __init fixup_system3(struct machine_desc *desc,
 		struct param_struct *params, char **cmdline, struct meminfo *mi);
-static void __init get_system3_scr(void);
 static int __init system3_init(void);
 static void __init system3_init_irq(void);
 static void __init system3_map_io(void);
 
-static void system3_IRQ_demux( int irq, void *dev_id, struct pt_regs *regs );
-static int system3_get_mctrl(struct uart_port *port);
+static u_int system3_get_mctrl(struct uart_port *port);
 static void system3_set_mctrl(struct uart_port *port, u_int mctrl);
 static void system3_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
 static int sdram_notifier(struct notifier_block *nb, unsigned long event, void *data);
 
-static int system3_lcd_power(int on);
-static int system3_backlight_power(int on);
+static void system3_lcd_power(int on);
+static void system3_backlight_power(int on);
 
 extern void convert_to_tag_list(struct param_struct *params, int mem_init);
 
@@ -101,9 +100,9 @@ extern void convert_to_tag_list(struct param_struct *params, int mem_init);
 
 static struct map_desc system3_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x01000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash bank 0 */
-  { 0xf3000000, 0x10000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* System Registers */
-  { 0xf4000000, 0x40000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA-1111 */
+  { 0xe8000000, 0x00000000,		0x01000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
+  { 0xf3000000, PT_CPLD_BASE,	0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* System Registers */
+  { 0xf4000000, PT_SA1111_BASE,	0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA-1111 */
   LAST_DESC
 };
 
@@ -113,12 +112,6 @@ static struct sa1100_port_fns system3_port_fns __initdata = {
 	pm:		system3_uart_pm,
 };
 
-static struct irqaction system3_irq = {
-	name:		"PT Digital Board SA1111 IRQ",
-	handler:	system3_IRQ_demux,
-	flags:		SA_INTERRUPT
-};
-
 static struct notifier_block system3_clkchg_block = {
 	notifier_call:	sdram_notifier,
 };
@@ -145,56 +138,82 @@ static void __init system3_map_io(void)
 /*********************************************************************
  * Install IRQ handler
  */
-static void system3_IRQ_demux( int irq, void *dev_id, struct pt_regs *regs )
+static void
+system3_irq_handler(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
 {
 	u_char irr;
 
-	for(;;){
-		//irr = PTCPLD_REG_IRQSR & (PT_IRQ_LAN | PT_IRQ_USAR | PT_IRQ_SA1111);
-		irr = PT_IRQSR & (PT_IRQ_LAN | PT_IRQ_SA1111);
+	//DPRINTK( "irq=%d, desc=%p, regs=%p\n", irq, desc, regs );
 
-		irr ^= (PT_IRQ_LAN);
-		if (!irr) break;
+	while (1) {
+		struct irqdesc *d;
 
-		if( irr & PT_IRQ_LAN )
-			do_IRQ(IRQ_SYSTEM3_SMC9196, regs);
+		/*
+		 * Acknowledge the parent IRQ.
+		 */
+		desc->chip->ack(irq);
 
-#if 0
-		/* Highspeed Serial Bus not yet used */
-		if( irr & PT_IRQ_USAR )
-			do_IRQ(PT_USAR_IRQ, regs);
-#endif
+		/*
+		 * Read the interrupt reason register.  Let's have all
+		 * active IRQ bits high.  Note: there is a typo in the
+		 * Neponset user's guide for the SA1111 IRR level.
+		 */
+		//irr = PT_IRQSR & (PT_IRR_LAN | PT_IRR_SA1111);
+		irr = PT_IRQSR & (PT_IRR_SA1111);
 
-		if( irr & PT_IRQ_SA1111 )
-			sa1111_IRQ_demux(irq, dev_id, regs);
-	}
-}
+		/* SMC IRQ is low-active, so "switch" bit over */
+		//irr ^= (PT_IRR_LAN);
 
+		//DPRINTK( "irr=0x%02x\n", irr );
 
-static void __init system3_init_irq(void)
-{
-	int irq;
+		if ((irr & (PT_IRR_LAN | PT_IRR_SA1111)) == 0)
+			break;
 
-	DPRINTK( "%s\n", "START" );
+		/*
+		 * Since there is no individual mask, we have to
+		 * mask the parent IRQ.  This is safe, since we'll
+		 * recheck the register for any pending IRQs.
+		 */
+		if (irr & (PT_IRR_LAN)) {
+			desc->chip->mask(irq);
+
+			if (irr & PT_IRR_LAN) {
+				//DPRINTK( "SMC9196, irq=%d\n", IRQ_SYSTEM3_SMC9196 );
+				d = irq_desc + IRQ_SYSTEM3_SMC9196;
+				d->handle(IRQ_SYSTEM3_SMC9196, d, regs);
+			}
+
+#if 0 /* no SSP yet on system 4 */
+			if (irr & IRR_USAR) {
+				d = irq_desc + IRQ_NEPONSET_USAR;
+				d->handle(IRQ_NEPONSET_USAR, d, regs);
+			}
+#endif
 
-	/* SA1111 IRQ not routed to a GPIO. */
-	sa1111_init_irq(-1);
+			desc->chip->unmask(irq);
+		}
 
-	/* setup extra IRQs */
-	irq = IRQ_SYSTEM3_SMC9196;
-	irq_desc[irq].valid	= 1;
-	irq_desc[irq].probe_ok	= 1;
+		if (irr & PT_IRR_SA1111) {
+			//DPRINTK( "SA1111, irq=%d\n", IRQ_SYSTEM3_SA1111 );
+			d = irq_desc + IRQ_SYSTEM3_SA1111;
+			d->handle(IRQ_SYSTEM3_SA1111, d, regs);
+		}
+	}
+}
 
-#if 0
-	/* Highspeed Serial Bus not yet used */
-	irq = PT_USAR_IRQ;
-	irq_desc[irq].valid	= 1;
-	irq_desc[irq].probe_ok	= 1;
-#endif
+static void __init system3_init_irq(void)
+{
+	/*
+	 * Install handler for GPIO25.
+	 */
+	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_chained_handler(IRQ_GPIO25, system3_irq_handler);
 
-	/* IRQ by CPLD */
-	set_GPIO_IRQ_edge( GPIO_GPIO(25), GPIO_RISING_EDGE );
-	setup_arm_irq( IRQ_GPIO25, &system3_irq );
+	/*
+	 * install eth irq
+	 */
+	set_irq_handler(IRQ_SYSTEM3_SMC9196, do_simple_IRQ);
+	set_irq_flags(IRQ_SYSTEM3_SMC9196, IRQF_VALID | IRQF_PROBE);
 }
 
 /**********************************************************************
@@ -270,7 +289,7 @@ static void system3_set_mctrl(struct uart_port *port, u_int mctrl)
 	}
 }
 
-static int system3_get_mctrl(struct uart_port *port)
+static u_int system3_get_mctrl(struct uart_port *port)
 {
 	u_int ret = 0;
 	u_int irqsr = PT_IRQSR;
@@ -358,12 +377,8 @@ static void system3_lcd_brightness(unsigned char value)
 
 static void system3_lcd_power(int on)
 {
-#error why is backlight stuff here???
 	if (on) {
 		system3_lcd_on();
-		system3_lcd_backlight_on();
-		system3_lcd_contrast(0x95);
-		system3_lcd_brightness(240);
 	} else {
 		system3_lcd_off();
 	}
@@ -407,10 +422,12 @@ static int __init system3_init(void)
 	 */
 	sa1110_mb_disable();
 
+	system3_init_irq();
+
 	/*
 	 * Probe for a SA1111.
 	 */
-	ret = sa1111_probe(0x40000000);
+	ret = sa1111_probe(PT_SA1111_BASE);
 	if (ret < 0) {
 		printk( KERN_WARNING"PT Digital Board: no SA1111 found!\n" );
 		goto DONE;
@@ -443,7 +460,11 @@ static int __init system3_init(void)
 	 */
 	sa1110_mb_enable();
 
-	system3_init_irq();
+	/*
+	 * Initialise SA1111 IRQs
+	 */
+	sa1111_init_irq(IRQ_SYSTEM3_SA1111);
+
 
 #if defined( CONFIG_CPU_FREQ )
 	ret = cpufreq_register_notifier(&system3_clkchg_block);
@@ -453,6 +474,7 @@ static int __init system3_init(void)
 	}
 #endif
 
+
 	ret = 0;
 DONE:
 	DPRINTK( "ret=%d\n", ret );

arch/arm/mach-sa1100/victor.c

@@ -60,7 +60,7 @@ fixup_victor(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc victor_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x00200000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash */
+  { 0xe8000000, 0x00000000, 0x00200000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/xp860.c

@@ -67,9 +67,9 @@ fixup_xp860(struct machine_desc *desc, struct param_struct *params,
 
 static struct map_desc xp860_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xf0000000, 0x10000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* SCSI */
-  { 0xf1000000, 0x18000000, 0x00100000, DOMAIN_IO, 1, 1, 0, 0 }, /* LAN */
-  { 0xf4000000, 0x40000000, 0x00800000, DOMAIN_IO, 1, 1, 0, 0 }, /* SA-1111 */
+  { 0xf0000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SCSI */
+  { 0xf1000000, 0x18000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* LAN */
+  { 0xf4000000, 0x40000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA-1111 */
   LAST_DESC
 };
 

arch/arm/mach-sa1100/yopy.c

@@ -69,9 +69,9 @@ __initcall(yopy_hw_init);
 
 static struct map_desc yopy_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
-  { 0xe8000000, 0x00000000, 0x04000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash 0 */
-  { 0xec000000, 0x08000000, 0x04000000, DOMAIN_IO, 1, 1, 0, 0 }, /* Flash 1 */
-  { 0xf0000000, 0x48000000, 0x00300000, DOMAIN_IO, 1, 1, 0, 0 }, /* LCD */
+  { 0xe8000000, 0x00000000, 0x04000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash 0 */
+  { 0xec000000, 0x08000000, 0x04000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash 1 */
+  { 0xf0000000, 0x48000000, 0x00300000, DOMAIN_IO, 0, 1, 0, 0 }, /* LCD */
   { 0xf1000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* EGPIO */
   LAST_DESC
 };

arch/arm/mm/fault-armv.c

@@ -151,7 +151,7 @@ static void adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	if (pmd_bad(*pmd))
 		goto bad_pmd;
 
-	pte = pte_offset(pmd, address);
+	pte = pte_offset_map(pmd, address);
 	entry = *pte;
 
 	/*
@@ -164,6 +164,7 @@ static void adjust_pte(struct vm_area_struct *vma, unsigned long address)
 		set_pte(pte, entry);
 		flush_tlb_page(vma, address);
 	}
+	pte_unmap(pte);
 	return;
 
 bad_pgd:

arch/arm/mm/fault-common.c

@@ -83,10 +83,14 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 			break;
 		}
 
-		pte = pte_offset(pmd, addr);
+#ifndef CONFIG_HIGHMEM
+		/* We must not map this if we have highmem enabled */
+		pte = pte_offset_map(pmd, addr);
 		printk(", *pte = %08lx", pte_val(*pte));
 #ifdef CONFIG_CPU_32
 		printk(", *ppte = %08lx", pte_val(pte[-PTRS_PER_PTE]));
+#endif
+		pte_unmap(pte);
 #endif
 	} while(0);
 

arch/arm/mm/init.c

@@ -64,38 +64,6 @@ static struct meminfo meminfo __initdata = { 0, };
  */
 struct page *empty_zero_page;
 
-#ifndef CONFIG_NO_PGT_CACHE
-struct pgtable_cache_struct quicklists;
-
-int do_check_pgt_cache(int low, int high)
-{
-	int freed = 0;
-
-	if(pgtable_cache_size > high) {
-		do {
-			if(pgd_quicklist) {
-				free_pgd_slow(get_pgd_fast());
-				freed++;
-			}
-			if(pmd_quicklist) {
-				pmd_free_slow(pmd_alloc_one_fast(NULL, 0));
-				freed++;
-			}
-			if(pte_quicklist) {
-				pte_free_slow(pte_alloc_one_fast(NULL, 0));
-				freed++;
-			}
-		} while(pgtable_cache_size > low);
-	}
-	return freed;
-}
-#else
-int do_check_pgt_cache(int low, int high)
-{
-	return 0;
-}
-#endif
-
 /* This is currently broken
  * PG_skip is used on sparc/sparc64 architectures to "skip" certain
  * parts of the address space.
@@ -145,9 +113,6 @@ void show_mem(void)
 	printk("%d slab pages\n", slab);
 	printk("%d pages shared\n", shared);
 	printk("%d pages swap cached\n", cached);
-#ifndef CONFIG_NO_PGT_CACHE
-	printk("%ld page tables cached\n", pgtable_cache_size);
-#endif
 	show_buffers();
 }