Commit 6d01f510 authored by Paul Mundt's avatar Paul Mundt

sh: Add SH7203 CPU support.

This adds support for the SH7203 (SH-2A) CPU.
Signed-off-by: default avatarKieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
parent ff1b7506
...@@ -158,6 +158,10 @@ config CPU_SUBTYPE_SH7619 ...@@ -158,6 +158,10 @@ config CPU_SUBTYPE_SH7619
# SH-2A Processor Support # SH-2A Processor Support
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
config CPU_SUBTYPE_SH7206 config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor" bool "Support SH7206 processor"
select CPU_SH2A select CPU_SH2A
...@@ -556,7 +560,7 @@ config SH_PCLK_FREQ ...@@ -556,7 +560,7 @@ config SH_PCLK_FREQ
default "32000000" if CPU_SUBTYPE_SH7722 default "32000000" if CPU_SUBTYPE_SH7722
default "33333333" if CPU_SUBTYPE_SH7770 || \ default "33333333" if CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206 CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202 default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000" default "50000000"
...@@ -567,7 +571,7 @@ config SH_PCLK_FREQ ...@@ -567,7 +571,7 @@ config SH_PCLK_FREQ
config SH_CLK_MD config SH_CLK_MD
int "CPU Mode Pin Setting" int "CPU Mode Pin Setting"
depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 depends on CPU_SH2
default 6 if CPU_SUBTYPE_SH7206 default 6 if CPU_SUBTYPE_SH7206
default 5 if CPU_SUBTYPE_SH7619 default 5 if CPU_SUBTYPE_SH7619
default 0 default 0
......
...@@ -32,6 +32,7 @@ config EARLY_SCIF_CONSOLE_PORT ...@@ -32,6 +32,7 @@ config EARLY_SCIF_CONSOLE_PORT
depends on EARLY_SCIF_CONSOLE depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780 default "0xffe00000" if CPU_SUBTYPE_SH7780
default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 default "0xfffe9800" if CPU_SUBTYPE_SH7206
default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
......
...@@ -7,3 +7,4 @@ obj-y := common.o probe.o opcode_helper.o ...@@ -7,3 +7,4 @@ obj-y := common.o probe.o opcode_helper.o
common-y += $(addprefix ../sh2/, ex.o entry.o) common-y += $(addprefix ../sh2/, ex.o entry.o)
obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
/*
* arch/sh/kernel/cpu/sh2a/clock-sh7203.c
*
* SH7203 support for the clock framework
*
* Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd)
*
* Based on clock-sh7263.c
* Copyright (C) 2006 Yoshinori Sato
*
* Based on clock-sh4.c
* Copyright (C) 2005 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/clock.h>
#include <asm/freq.h>
#include <asm/io.h>
const static int pll1rate[]={8,12,16,0};
const static int pfc_divisors[]={1,2,3,4,6,8,12};
#define ifc_divisors pfc_divisors
#if (CONFIG_SH_CLK_MD == 0)
#define PLL2 (1)
#elif (CONFIG_SH_CLK_MD == 1)
#define PLL2 (2)
#elif (CONFIG_SH_CLK_MD == 2)
#define PLL2 (4)
#elif (CONFIG_SH_CLK_MD == 3)
#define PLL2 (4)
#else
#error "Illegal Clock Mode!"
#endif
static void master_clk_init(struct clk *clk)
{
clk->rate *= pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0003] * PLL2 ;
}
static struct clk_ops sh7203_master_clk_ops = {
.init = master_clk_init,
};
static void module_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
clk->rate = clk->parent->rate / pfc_divisors[idx];
}
static struct clk_ops sh7203_module_clk_ops = {
.recalc = module_clk_recalc,
};
static void bus_clk_recalc(struct clk *clk)
{
int idx = (ctrl_inw(FREQCR) & 0x0007);
clk->rate = clk->parent->rate / pfc_divisors[idx-2];
}
static struct clk_ops sh7203_bus_clk_ops = {
.recalc = bus_clk_recalc,
};
static void cpu_clk_recalc(struct clk *clk)
{
clk->rate = clk->parent->rate;
}
static struct clk_ops sh7203_cpu_clk_ops = {
.recalc = cpu_clk_recalc,
};
static struct clk_ops *sh7203_clk_ops[] = {
&sh7203_master_clk_ops,
&sh7203_module_clk_ops,
&sh7203_bus_clk_ops,
&sh7203_cpu_clk_ops,
};
void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
{
if (idx < ARRAY_SIZE(sh7203_clk_ops))
*ops = sh7203_clk_ops[idx];
}
...@@ -3,25 +3,33 @@ ...@@ -3,25 +3,33 @@
* *
* CPU Subtype Probing for SH-2A. * CPU Subtype Probing for SH-2A.
* *
* Copyright (C) 2004, 2005 Paul Mundt * Copyright (C) 2004 - 2007 Paul Mundt
* *
* This file is subject to the terms and conditions of the GNU General Public * This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive * License. See the file "COPYING" in the main directory of this archive
* for more details. * for more details.
*/ */
#include <linux/init.h> #include <linux/init.h>
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/cache.h> #include <asm/cache.h>
int __init detect_cpu_and_cache_system(void) int __init detect_cpu_and_cache_system(void)
{ {
/* Just SH7206 for now .. */ /* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */
boot_cpu_data.type = CPU_SH7206;
boot_cpu_data.flags |= CPU_HAS_OP32; boot_cpu_data.flags |= CPU_HAS_OP32;
#if defined(CONFIG_CPU_SUBTYPE_SH7203)
boot_cpu_data.type = CPU_SH7203;
/* SH7203 has an FPU.. */
boot_cpu_data.flags |= CPU_HAS_FPU;
#elif defined(CONFIG_CPU_SUBTYPE_SH7206)
boot_cpu_data.type = CPU_SH7206;
/* While SH7206 has a DSP.. */
boot_cpu_data.flags |= CPU_HAS_DSP;
#endif
boot_cpu_data.dcache.ways = 4; boot_cpu_data.dcache.ways = 4;
boot_cpu_data.dcache.way_incr = (1 << 11); boot_cpu_data.dcache.way_incr = (1 << 11);
boot_cpu_data.dcache.sets = 128; boot_cpu_data.dcache.sets = 128;
boot_cpu_data.dcache.entry_shift = 4; boot_cpu_data.dcache.entry_shift = 4;
boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; boot_cpu_data.dcache.linesz = L1_CACHE_BYTES;
...@@ -37,4 +45,3 @@ int __init detect_cpu_and_cache_system(void) ...@@ -37,4 +45,3 @@ int __init detect_cpu_and_cache_system(void)
return 0; return 0;
} }
/*
* SH7203 Setup
*
* Copyright (C) 2007 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <asm/sci.h>
enum {
UNUSED = 0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI,
DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI,
DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI,
DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI,
USB, LCDC, CMT0, CMT1, BSC, WDT,
MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
ADC_ADI,
IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI,
IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI,
IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI,
IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI,
SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI,
SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI,
SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
RTC_ARM, RTC_PRD, RTC_CUP,
RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE,
RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE,
/* interrupt groups */
PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
MTU3_ABCD, MTU4_ABCD,
IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3,
SSU0, SSU1, FLCTL, RTC, RCAN0, RCAN1
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109),
INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113),
INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117),
INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121),
INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125),
INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129),
INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133),
INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137),
INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147),
INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149),
INTC_IRQ(MTU2_TCI0V, 150),
INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152),
INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154),
INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156),
INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158),
INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160),
INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162),
INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164),
INTC_IRQ(MTU2_TCI3V, 165),
INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167),
INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169),
INTC_IRQ(MTU2_TCI4V, 170),
INTC_IRQ(ADC_ADI, 171),
INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173),
INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175),
INTC_IRQ(IIC30_TEI, 176),
INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178),
INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180),
INTC_IRQ(IIC31_TEI, 181),
INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183),
INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185),
INTC_IRQ(IIC32_TEI, 186),
INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188),
INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190),
INTC_IRQ(IIC33_TEI, 191),
INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193),
INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195),
INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197),
INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199),
INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201),
INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203),
INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205),
INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207),
INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209),
INTC_IRQ(SSU0_SSTXI, 210),
INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212),
INTC_IRQ(SSU1_SSTXI, 213),
INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225),
INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227),
INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232),
INTC_IRQ(RTC_CUP, 233),
INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235),
INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237),
INTC_IRQ(RCAN0_SLE, 238),
INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240),
INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242),
INTC_IRQ(RCAN1_SLE, 243),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
PINT4, PINT5, PINT6, PINT7),
INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI),
INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI),
INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI),
INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI),
INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI),
INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI),
INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI),
INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI),
INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B),
INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U),
INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B),
INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U),
INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI,
IIC30_TEI),
INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI,
IIC31_TEI),
INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI,
IIC32_TEI),
INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI,
IIC33_TEI),
INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI),
INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI),
INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I,
FLCTL_FLTREQ1I),
INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP),
INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1,
RCAN0_SLE),
INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1,
RCAN1_SLE),
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
{ 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
{ 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
{ 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
{ 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } },
{ 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } },
{ 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } },
{ 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB,
MTU2_VU } },
{ 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD,
MTU2_TCI4V } },
{ 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } },
{ 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } },
{ 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } },
{ 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII,
SSI3_SSII, 0 } },
{ 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } },
{ 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } },
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xfffe0808, 0, 16, /* PINTER */
{ 0, 0, 0, 0, 0, 0, 0, 0,
PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups,
NULL, mask_registers, prio_registers, NULL);
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 193, 194, 195, 192 },
}, {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 197, 198, 199, 196 },
}, {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 201, 202, 203, 200 },
}, {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 205, 206, 207, 204 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct resource rtc_resources[] = {
[0] = {
.start = 0xffff2000,
.end = 0xffff2000 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 232,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 233,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 231,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static struct platform_device *sh7203_devices[] __initdata = {
&sci_device,
&rtc_device,
};
static int __init sh7203_devices_setup(void)
{
return platform_add_devices(sh7203_devices,
ARRAY_SIZE(sh7203_devices));
}
__initcall(sh7203_devices_setup);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
...@@ -294,6 +294,7 @@ void __init setup_arch(char **cmdline_p) ...@@ -294,6 +294,7 @@ void __init setup_arch(char **cmdline_p)
} }
static const char *cpu_name[] = { static const char *cpu_name[] = {
[CPU_SH7203] = "SH7203",
[CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
......
...@@ -31,7 +31,7 @@ ...@@ -31,7 +31,7 @@
#define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0)
#define CMT_CMCSR_INIT 0x0040 #define CMT_CMCSR_INIT 0x0040
#define CMT_CMCSR_CALIB 0x0000 #define CMT_CMCSR_CALIB 0x0000
#elif defined(CONFIG_CPU_SUBTYPE_SH7206) #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || defined(CONFIG_CPU_SUBTYPE_SH7206)
#define CMT_CMSTR 0xfffec000 #define CMT_CMSTR 0xfffec000
#define CMT_CMCSR_0 0xfffec002 #define CMT_CMCSR_0 0xfffec002
#define CMT_CMCNT_0 0xfffec004 #define CMT_CMCNT_0 0xfffec004
......
...@@ -142,7 +142,8 @@ ...@@ -142,7 +142,8 @@
# define SCIF_OPER 0x0001 /* Overrun error bit */ # define SCIF_OPER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY # define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7206) #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206)
# define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */
# define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */
# define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */
...@@ -617,7 +618,8 @@ static inline int sci_rxd_in(struct uart_port *port) ...@@ -617,7 +618,8 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */
return 1; return 1;
} }
#elif defined(CONFIG_CPU_SUBTYPE_SH7206) #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \
defined(CONFIG_CPU_SUBTYPE_SH7206)
static inline int sci_rxd_in(struct uart_port *port) static inline int sci_rxd_in(struct uart_port *port)
{ {
if (port->mapbase == 0xfffe8000) if (port->mapbase == 0xfffe8000)
......
...@@ -25,7 +25,7 @@ static void __init check_bugs(void) ...@@ -25,7 +25,7 @@ static void __init check_bugs(void)
case CPU_SH7619: case CPU_SH7619:
*p++ = '2'; *p++ = '2';
break; break;
case CPU_SH7206: case CPU_SH7203 ... CPU_SH7206:
*p++ = '2'; *p++ = '2';
*p++ = 'a'; *p++ = 'a';
break; break;
......
...@@ -10,9 +10,7 @@ ...@@ -10,9 +10,7 @@
#ifndef __ASM_CPU_SH2A_FREQ_H #ifndef __ASM_CPU_SH2A_FREQ_H
#define __ASM_CPU_SH2A_FREQ_H #define __ASM_CPU_SH2A_FREQ_H
#if defined(CONFIG_CPU_SUBTYPE_SH7206)
#define FREQCR 0xfffe0010 #define FREQCR 0xfffe0010
#endif
#endif /* __ASM_CPU_SH2A_FREQ_H */ #endif /* __ASM_CPU_SH2A_FREQ_H */
...@@ -17,7 +17,7 @@ enum cpu_type { ...@@ -17,7 +17,7 @@ enum cpu_type {
CPU_SH7619, CPU_SH7619,
/* SH-2A types */ /* SH-2A types */
CPU_SH7206, CPU_SH7203, CPU_SH7206,
/* SH-3 types */ /* SH-3 types */
CPU_SH7705, CPU_SH7706, CPU_SH7707, CPU_SH7705, CPU_SH7706, CPU_SH7707,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment