net: ena: Eliminate duplicate barriers on weakly-ordered archs

Code includes barrier() followed by writel(). writel() already has a
barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Create a new wrapper function with relaxed write operator. Use the new
wrapper when a write is following a barrier().

Since code already has an explicit barrier call, changing writel() to
writel_relaxed() and adding mmiowb() for ordering protection.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amazon/ena/ena_com.c

@@ -631,8 +631,10 @@ static u32 ena_com_reg_bar_read32(struct ena_com_dev *ena_dev, u16 offset)
 	 */
 	wmb();
 
-	writel(mmio_read_reg, ena_dev->reg_bar + ENA_REGS_MMIO_REG_READ_OFF);
+	writel_relaxed(mmio_read_reg,
+		       ena_dev->reg_bar + ENA_REGS_MMIO_REG_READ_OFF);
 
+	mmiowb();
 	for (i = 0; i < timeout; i++) {
 		if (read_resp->req_id == mmio_read->seq_num)
 			break;
@@ -1826,7 +1828,9 @@ void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data)
 
 	/* write the aenq doorbell after all AENQ descriptors were read */
 	mb();
-	writel((u32)aenq->head, dev->reg_bar + ENA_REGS_AENQ_HEAD_DB_OFF);
+	writel_relaxed((u32)aenq->head,
+		       dev->reg_bar + ENA_REGS_AENQ_HEAD_DB_OFF);
+	mmiowb();
 }
 
 int ena_com_dev_reset(struct ena_com_dev *ena_dev,

drivers/net/ethernet/amazon/ena/ena_eth_com.h

@@ -107,7 +107,8 @@ static inline int ena_com_sq_empty_space(struct ena_com_io_sq *io_sq)
 	return io_sq->q_depth - 1 - cnt;
 }
 
-static inline int ena_com_write_sq_doorbell(struct ena_com_io_sq *io_sq)
+static inline int ena_com_write_sq_doorbell(struct ena_com_io_sq *io_sq,
+					    bool relaxed)
 {
 	u16 tail;
 
@@ -116,7 +117,10 @@ static inline int ena_com_write_sq_doorbell(struct ena_com_io_sq *io_sq)
 	pr_debug("write submission queue doorbell for queue: %d tail: %d\n",
 		 io_sq->qid, tail);
 
-	writel(tail, io_sq->db_addr);
+	if (relaxed)
+		writel_relaxed(tail, io_sq->db_addr);
+	else
+		writel(tail, io_sq->db_addr);
 
 	return 0;
 }

drivers/net/ethernet/amazon/ena/ena_netdev.c

@@ -556,7 +556,8 @@ static int ena_refill_rx_bufs(struct ena_ring *rx_ring, u32 num)
 		 * issue a doorbell
 		 */
 		wmb();
-		ena_com_write_sq_doorbell(rx_ring->ena_com_io_sq);
+		ena_com_write_sq_doorbell(rx_ring->ena_com_io_sq, true);
+		mmiowb();
 	}
 
 	rx_ring->next_to_use = next_to_use;
@@ -2151,7 +2152,7 @@ static netdev_tx_t ena_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	if (netif_xmit_stopped(txq) || !skb->xmit_more) {
 		/* trigger the dma engine */
-		ena_com_write_sq_doorbell(tx_ring->ena_com_io_sq);
+		ena_com_write_sq_doorbell(tx_ring->ena_com_io_sq, false);
 		u64_stats_update_begin(&tx_ring->syncp);
 		tx_ring->tx_stats.doorbells++;
 		u64_stats_update_end(&tx_ring->syncp);