Merge tag 'nand/for-6.7' into mtd/next

The raw NAND subsystem has, as usual, seen a bit of cleanup being done
this cycle, typically return values of platform_get_irq() and
devm_kasprintf(), plus structure annotations for sanitizers. There is
also a better ECC check in the Arasan driver. This comes with smaller
misc changes.

In the SPI-NAND world there is now support for Foresee F35SQA002G,
Winbond W25N and XTX XT26 chips.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

drivers/mtd/nand/raw/arasan-nand-controller.c

@@ -481,7 +481,7 @@ static int anfc_read_page_hw_ecc(struct nand_chip *chip, u8 *buf,
 		}
 
 		bf = nand_check_erased_ecc_chunk(raw_buf, chip->ecc.size,
-						 NULL, 0, NULL, 0,
+						 anand->hw_ecc, chip->ecc.bytes, NULL, 0,
 						 chip->ecc.strength);
 		if (bf > 0) {
 			mtd->ecc_stats.corrected += bf;

drivers/mtd/nand/raw/cadence-nand-controller.c

@@ -528,7 +528,7 @@ struct cdns_nand_chip {
 	/* ECC strength index. */
 	u8 corr_str_idx;
 
-	u8 cs[];
+	u8 cs[] __counted_by(nsels);
 };
 
 struct ecc_info {

drivers/mtd/nand/raw/intel-nand-controller.c

@@ -619,6 +619,11 @@ static int ebu_nand_probe(struct platform_device *pdev)
 	ebu_host->cs_num = cs;
 
 	resname = devm_kasprintf(dev, GFP_KERNEL, "nand_cs%d", cs);
+	if (!resname) {
+		ret = -ENOMEM;
+		goto err_of_node_put;
+	}
+
 	ebu_host->cs[cs].chipaddr = devm_platform_ioremap_resource_byname(pdev,
 									  resname);
 	if (IS_ERR(ebu_host->cs[cs].chipaddr)) {
@@ -649,6 +654,11 @@ static int ebu_nand_probe(struct platform_device *pdev)
 	}
 
 	resname = devm_kasprintf(dev, GFP_KERNEL, "addr_sel%d", cs);
+	if (!resname) {
+		ret = -ENOMEM;
+		goto err_cleanup_dma;
+	}
+
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, resname);
 	if (!res) {
 		ret = -EINVAL;

drivers/mtd/nand/raw/internals.h

@@ -106,7 +106,6 @@ int nand_read_page_raw_notsupp(struct nand_chip *chip, u8 *buf,
 			       int oob_required, int page);
 int nand_write_page_raw_notsupp(struct nand_chip *chip, const u8 *buf,
 				int oob_required, int page);
-int nand_exit_status_op(struct nand_chip *chip);
 int nand_read_param_page_op(struct nand_chip *chip, u8 page, void *buf,
 			    unsigned int len);
 void nand_decode_ext_id(struct nand_chip *chip);

drivers/mtd/nand/raw/meson_nand.c

@@ -1134,6 +1134,9 @@ static int meson_nfc_clk_init(struct meson_nfc *nfc)
 	init.name = devm_kasprintf(nfc->dev,
 				   GFP_KERNEL, "%s#div",
 				   dev_name(nfc->dev));
+	if (!init.name)
+		return -ENOMEM;
+
 	init.ops = &clk_divider_ops;
 	nfc_divider_parent_data[0].fw_name = "device";
 	init.parent_data = nfc_divider_parent_data;

drivers/mtd/nand/raw/mtk_nand.c

@@ -130,7 +130,7 @@ struct mtk_nfc_nand_chip {
 	u32 spare_per_sector;
 
 	int nsels;
-	u8 sels[];
+	u8 sels[] __counted_by(nsels);
 	/* nothing after this field */
 };
 

drivers/mtd/nand/raw/nand_base.c

@@ -42,7 +42,6 @@
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/gpio/consumer.h>
 
 #include "internals.h"

drivers/mtd/nand/raw/omap2.c

@@ -1881,8 +1881,8 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case NAND_OMAP_PREFETCH_IRQ:
 		info->gpmc_irq_fifo = platform_get_irq(info->pdev, 0);
-		if (info->gpmc_irq_fifo <= 0)
-			return -ENODEV;
+		if (info->gpmc_irq_fifo < 0)
+			return info->gpmc_irq_fifo;
 		err = devm_request_irq(dev, info->gpmc_irq_fifo,
 				       omap_nand_irq, IRQF_SHARED,
 				       "gpmc-nand-fifo", info);
@@ -1894,8 +1894,8 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 		}
 
 		info->gpmc_irq_count = platform_get_irq(info->pdev, 1);
-		if (info->gpmc_irq_count <= 0)
-			return -ENODEV;
+		if (info->gpmc_irq_count < 0)
+			return info->gpmc_irq_count;
 		err = devm_request_irq(dev, info->gpmc_irq_count,
 				       omap_nand_irq, IRQF_SHARED,
 				       "gpmc-nand-count", info);

drivers/mtd/nand/raw/rockchip-nand-controller.c

@@ -158,8 +158,7 @@ struct rk_nfc_nand_chip {
 	u32 timing;
 
 	u8 nsels;
-	u8 sels[];
-	/* Nothing after this field. */
+	u8 sels[] __counted_by(nsels);
 };
 
 struct rk_nfc {
@@ -1119,7 +1118,7 @@ static int rk_nfc_nand_chip_init(struct device *dev, struct rk_nfc *nfc,
 		return -EINVAL;
 	}
 
-	rknand = devm_kzalloc(dev, sizeof(*rknand) + nsels * sizeof(u8),
+	rknand = devm_kzalloc(dev, struct_size(rknand, sels, nsels),
 			      GFP_KERNEL);
 	if (!rknand)
 		return -ENOMEM;

drivers/mtd/nand/raw/sh_flctl.c

@@ -1215,6 +1215,7 @@ static void flctl_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver flctl_driver = {
+	.probe		= flctl_probe,
 	.remove_new	= flctl_remove,
 	.driver = {
 		.name	= "sh_flctl",
@@ -1222,7 +1223,7 @@ static struct platform_driver flctl_driver = {
 	},
 };
 
-module_platform_driver_probe(flctl_driver, flctl_probe);
+module_platform_driver(flctl_driver);
 
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Yoshihiro Shimoda");

drivers/mtd/nand/raw/tegra_nand.c

@@ -1197,6 +1197,10 @@ static int tegra_nand_probe(struct platform_device *pdev)
 	init_completion(&ctrl->dma_complete);
 
 	ctrl->irq = platform_get_irq(pdev, 0);
+	if (ctrl->irq < 0) {
+		err = ctrl->irq;
+		goto err_put_pm;
+	}
 	err = devm_request_irq(&pdev->dev, ctrl->irq, tegra_nand_irq, 0,
 			       dev_name(&pdev->dev), ctrl);
 	if (err) {

drivers/mtd/nand/raw/xway_nand.c

@@ -6,7 +6,6 @@
  */
 
 #include <linux/mtd/rawnand.h>
-#include <linux/of_gpio.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 

drivers/mtd/nand/spi/Makefile

 # SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o alliancememory.o ato.o esmt.o gigadevice.o macronix.o
+spinand-objs := core.o alliancememory.o ato.o esmt.o foresee.o gigadevice.o macronix.o
 spinand-objs += micron.o paragon.o toshiba.o winbond.o xtx.o
 obj-$(CONFIG_MTD_SPI_NAND) += spinand.o

drivers/mtd/nand/spi/core.c

@@ -940,6 +940,7 @@ static const struct spinand_manufacturer *spinand_manufacturers[] = {
 	&alliancememory_spinand_manufacturer,
 	&ato_spinand_manufacturer,
 	&esmt_c8_spinand_manufacturer,
+	&foresee_spinand_manufacturer,
 	&gigadevice_spinand_manufacturer,
 	&macronix_spinand_manufacturer,
 	&micron_spinand_manufacturer,

drivers/mtd/nand/spi/foresee.c

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ *
+ * Author: Martin Kurbanov <mmkurbanov@salutedevices.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_FORESEE		0xCD
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int f35sqa002g_ooblayout_ecc(struct mtd_info *mtd, int section,
+				    struct mtd_oob_region *region)
+{
+	return -ERANGE;
+}
+
+static int f35sqa002g_ooblayout_free(struct mtd_info *mtd, int section,
+				     struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	/* Reserve 2 bytes for the BBM. */
+	region->offset = 2;
+	region->length = 62;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops f35sqa002g_ooblayout = {
+	.ecc = f35sqa002g_ooblayout_ecc,
+	.free = f35sqa002g_ooblayout_free,
+};
+
+static int f35sqa002g_ecc_get_status(struct spinand_device *spinand, u8 status)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case STATUS_ECC_HAS_BITFLIPS:
+		return nanddev_get_ecc_conf(nand)->strength;
+
+	default:
+		break;
+	}
+
+	/* More than 1-bit error was detected in one or more sectors and
+	 * cannot be corrected.
+	 */
+	return -EBADMSG;
+}
+
+static const struct spinand_info foresee_spinand_table[] = {
+	SPINAND_INFO("F35SQA002G",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x72, 0x72),
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(1, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&f35sqa002g_ooblayout,
+				     f35sqa002g_ecc_get_status)),
+};
+
+static const struct spinand_manufacturer_ops foresee_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer foresee_spinand_manufacturer = {
+	.id = SPINAND_MFR_FORESEE,
+	.name = "FORESEE",
+	.chips = foresee_spinand_table,
+	.nchips = ARRAY_SIZE(foresee_spinand_table),
+	.ops = &foresee_spinand_manuf_ops,
+};

drivers/mtd/nand/spi/winbond.c

@@ -169,6 +169,51 @@ static const struct spinand_info winbond_spinand_table[] = {
 					      &update_cache_variants),
 		     0,
 		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+	SPINAND_INFO("W25N01JW",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbc, 0x21),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25m02gv_ooblayout, w25n02kv_ecc_get_status)),
+	SPINAND_INFO("W25N02JWZEIF",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xbf, 0x22),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 2, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+	SPINAND_INFO("W25N512GW",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x20),
+		     NAND_MEMORG(1, 2048, 64, 64, 512, 10, 1, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+	SPINAND_INFO("W25N02KWZEIR",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x22),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25n02kv_ooblayout, w25n02kv_ecc_get_status)),
+	SPINAND_INFO("W25N01GWZEIG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xba, 0x21),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25m02gv_ooblayout, w25n02kv_ecc_get_status)),
 };
 
 static int winbond_spinand_init(struct spinand_device *spinand)

drivers/mtd/nand/spi/xtx.c

@@ -4,6 +4,7 @@
  * Felix Matouschek <felix@matouschek.org>
  */
 
+#include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/mtd/spinand.h>
@@ -15,6 +16,12 @@
 #define XT26G0XA_STATUS_ECC_8_CORRECTED	(3 << 4)
 #define XT26G0XA_STATUS_ECC_UNCOR_ERROR	(2 << 4)
 
+#define XT26XXXD_STATUS_ECC3_ECC2_MASK	    GENMASK(7, 6)
+#define XT26XXXD_STATUS_ECC_NO_DETECTED     (0)
+#define XT26XXXD_STATUS_ECC_1_7_CORRECTED   (1)
+#define XT26XXXD_STATUS_ECC_8_CORRECTED     (3)
+#define XT26XXXD_STATUS_ECC_UNCOR_ERROR     (2)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -84,6 +91,53 @@ static int xt26g0xa_ecc_get_status(struct spinand_device *spinand,
 	return status >> 2;
 }
 
+static int xt26xxxd_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
+
+	return 0;
+}
+
+static int xt26xxxd_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 2;
+	region->length = mtd->oobsize / 2 - 2;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops xt26xxxd_ooblayout = {
+	.ecc = xt26xxxd_ooblayout_ecc,
+	.free = xt26xxxd_ooblayout_free,
+};
+
+static int xt26xxxd_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
+{
+	switch (FIELD_GET(STATUS_ECC_MASK, status)) {
+	case XT26XXXD_STATUS_ECC_NO_DETECTED:
+		return 0;
+	case XT26XXXD_STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+	case XT26XXXD_STATUS_ECC_1_7_CORRECTED:
+		return 4 + FIELD_GET(XT26XXXD_STATUS_ECC3_ECC2_MASK, status);
+	case XT26XXXD_STATUS_ECC_8_CORRECTED:
+		return 8;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
 static const struct spinand_info xtx_spinand_table[] = {
 	SPINAND_INFO("XT26G01A",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xE1),
@@ -115,6 +169,86 @@ static const struct spinand_info xtx_spinand_table[] = {
 		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&xt26g0xa_ooblayout,
 				     xt26g0xa_ecc_get_status)),
+	SPINAND_INFO("XT26G01D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x31),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G11D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x34),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26Q01D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G02D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x32),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G12D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x35),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26Q02D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x52),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26G04D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x33),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
+	SPINAND_INFO("XT26Q04D",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x53),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&xt26xxxd_ooblayout,
+				     xt26xxxd_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops xtx_spinand_manuf_ops = {

include/linux/mtd/spinand.h

@@ -263,6 +263,7 @@ struct spinand_manufacturer {
 extern const struct spinand_manufacturer alliancememory_spinand_manufacturer;
 extern const struct spinand_manufacturer ato_spinand_manufacturer;
 extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
+extern const struct spinand_manufacturer foresee_spinand_manufacturer;
 extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
 extern const struct spinand_manufacturer macronix_spinand_manufacturer;
 extern const struct spinand_manufacturer micron_spinand_manufacturer;