Commit 6dbea9f0 authored by Jean-Francois Thibert's avatar Jean-Francois Thibert Committed by Mauro Carvalho Chehab

[media] Add support for KWorld UB435-Q V2

This patch adds support for the UB435-Q V2. You might need to
use the device once with the Windows driver provided by KWorld
in order to permanently reprogram the device descriptors. Thanks
to Jarod Wilson for the initial attempt at adding support for this
device.

[m.chehab@samsung.com: Fixed Whitespace mangling, Coding Style and
 improved the error handling at DVB attach]
Signed-off-by: default avatarJean-Francois Thibert <jfthibert@google.com>
Reviewed-by: default avatarFrank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent c6dd1ef8
...@@ -175,7 +175,7 @@ static struct em28xx_reg_seq evga_indtube_digital[] = { ...@@ -175,7 +175,7 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
}; };
/* /*
* KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map: * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map:
* EM_GPIO_0 - currently unknown * EM_GPIO_0 - currently unknown
* EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
* EM_GPIO_2 - currently unknown * EM_GPIO_2 - currently unknown
...@@ -2031,6 +2031,18 @@ struct em28xx_board em28xx_boards[] = { ...@@ -2031,6 +2031,18 @@ struct em28xx_board em28xx_boards[] = {
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ, EM28XX_I2C_FREQ_400_KHZ,
}, },
/*
* 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2
* Empia EM2874B + LG DT3305 + NXP TDA18271HDC2
*/
[EM2874_BOARD_KWORLD_UB435Q_V2] = {
.name = "KWorld USB ATSC TV Stick UB435-Q V2",
.tuner_type = TUNER_ABSENT,
.has_dvb = 1,
.dvb_gpio = kworld_a340_digital,
.tuner_gpio = default_tuner_gpio,
.def_i2c_bus = 1,
},
}; };
const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
...@@ -2174,6 +2186,8 @@ struct usb_device_id em28xx_id_table[] = { ...@@ -2174,6 +2186,8 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2860_BOARD_GADMEI_UTV330 }, .driver_info = EM2860_BOARD_GADMEI_UTV330 },
{ USB_DEVICE(0x1b80, 0xa340), { USB_DEVICE(0x1b80, 0xa340),
.driver_info = EM2870_BOARD_KWORLD_A340 }, .driver_info = EM2870_BOARD_KWORLD_A340 },
{ USB_DEVICE(0x1b80, 0xe346),
.driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 },
{ USB_DEVICE(0x2013, 0x024f), { USB_DEVICE(0x2013, 0x024f),
.driver_info = EM28174_BOARD_PCTV_290E }, .driver_info = EM28174_BOARD_PCTV_290E },
{ USB_DEVICE(0x2013, 0x024c), { USB_DEVICE(0x2013, 0x024c),
......
...@@ -298,6 +298,18 @@ static struct lgdt3305_config em2870_lgdt3304_dev = { ...@@ -298,6 +298,18 @@ static struct lgdt3305_config em2870_lgdt3304_dev = {
.qam_if_khz = 4000, .qam_if_khz = 4000,
}; };
static struct lgdt3305_config em2874_lgdt3305_dev = {
.i2c_addr = 0x0e,
.demod_chip = LGDT3305,
.spectral_inversion = 1,
.deny_i2c_rptr = 0,
.mpeg_mode = LGDT3305_MPEG_SERIAL,
.tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
.tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
.vsb_if_khz = 3250,
.qam_if_khz = 4000,
};
static struct s921_config sharp_isdbt = { static struct s921_config sharp_isdbt = {
.demod_address = 0x30 >> 1 .demod_address = 0x30 >> 1
}; };
...@@ -329,6 +341,11 @@ static struct tda18271_config kworld_a340_config = { ...@@ -329,6 +341,11 @@ static struct tda18271_config kworld_a340_config = {
.std_map = &kworld_a340_std_map, .std_map = &kworld_a340_std_map,
}; };
static struct tda18271_config kworld_ub435q_v2_config = {
.std_map = &kworld_a340_std_map,
.gate = TDA18271_GATE_DIGITAL,
};
static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = { static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
.demod_address = (0x1e >> 1), .demod_address = (0x1e >> 1),
.no_tuner = 1, .no_tuner = 1,
...@@ -1296,6 +1313,23 @@ static int em28xx_dvb_init(struct em28xx *dev) ...@@ -1296,6 +1313,23 @@ static int em28xx_dvb_init(struct em28xx *dev)
goto out_free; goto out_free;
} }
break; break;
case EM2874_BOARD_KWORLD_UB435Q_V2:
dvb->fe[0] = dvb_attach(lgdt3305_attach,
&em2874_lgdt3305_dev,
&dev->i2c_adap[dev->def_i2c_bus]);
if (!dvb->fe[0]) {
result = -EINVAL;
goto out_free;
}
/* Attach the demodulator. */
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
&dev->i2c_adap[dev->def_i2c_bus],
&kworld_ub435q_v2_config)) {
result = -EINVAL;
goto out_free;
}
break;
default: default:
em28xx_errdev("/2: The frontend of your DVB/ATSC card" em28xx_errdev("/2: The frontend of your DVB/ATSC card"
" isn't supported yet\n"); " isn't supported yet\n");
......
...@@ -131,6 +131,7 @@ ...@@ -131,6 +131,7 @@
#define EM2884_BOARD_TERRATEC_HTC_USB_XS 87 #define EM2884_BOARD_TERRATEC_HTC_USB_XS 87
#define EM2884_BOARD_C3TECH_DIGITAL_DUO 88 #define EM2884_BOARD_C3TECH_DIGITAL_DUO 88
#define EM2874_BOARD_DELOCK_61959 89 #define EM2874_BOARD_DELOCK_61959 89
#define EM2874_BOARD_KWORLD_UB435Q_V2 90
/* Limits minimum and default number of buffers */ /* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4 #define EM28XX_MIN_BUF 4
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment