Commit 6dd25659 authored by Li Jun's avatar Li Jun Committed by Greg Kroah-Hartman

usb: dwc3: add imx8mp dwc3 glue layer driver

imx8mp SoC integrate dwc3 3.30b IP and has some customizations to
support low power, which has a seprated wakeup irq and additional
logic to wakeup usb from low power mode both for host mode and
device mode.
Signed-off-by: default avatarLi Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1609241866-9508-3-git-send-email-jun.li@nxp.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d2a704e2
...@@ -139,4 +139,14 @@ config USB_DWC3_QCOM ...@@ -139,4 +139,14 @@ config USB_DWC3_QCOM
for peripheral mode support. for peripheral mode support.
Say 'Y' or 'M' if you have one such device. Say 'Y' or 'M' if you have one such device.
config USB_DWC3_IMX8MP
tristate "NXP iMX8MP Platform"
depends on OF && COMMON_CLK
depends on (ARCH_MXC && ARM64) || COMPILE_TEST
default USB_DWC3
help
NXP iMX8M Plus SoC use DesignWare Core IP for USB2/3
functionality.
Say 'Y' or 'M' if you have one such device.
endif endif
...@@ -51,3 +51,4 @@ obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o ...@@ -51,3 +51,4 @@ obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o
obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o
obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o
obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
obj-$(CONFIG_USB_DWC3_IMX8MP) += dwc3-imx8mp.o
// SPDX-License-Identifier: GPL-2.0
/**
* dwc3-imx8mp.c - NXP imx8mp Specific Glue layer
*
* Copyright (c) 2020 NXP.
*/
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include "core.h"
/* USB wakeup registers */
#define USB_WAKEUP_CTRL 0x00
/* Global wakeup interrupt enable, also used to clear interrupt */
#define USB_WAKEUP_EN BIT(31)
/* Wakeup from connect or disconnect, only for superspeed */
#define USB_WAKEUP_SS_CONN BIT(5)
/* 0 select vbus_valid, 1 select sessvld */
#define USB_WAKEUP_VBUS_SRC_SESS_VAL BIT(4)
/* Enable signal for wake up from u3 state */
#define USB_WAKEUP_U3_EN BIT(3)
/* Enable signal for wake up from id change */
#define USB_WAKEUP_ID_EN BIT(2)
/* Enable signal for wake up from vbus change */
#define USB_WAKEUP_VBUS_EN BIT(1)
/* Enable signal for wake up from dp/dm change */
#define USB_WAKEUP_DPDM_EN BIT(0)
#define USB_WAKEUP_EN_MASK GENMASK(5, 0)
struct dwc3_imx8mp {
struct device *dev;
struct platform_device *dwc3;
void __iomem *glue_base;
struct clk *hsio_clk;
struct clk *suspend_clk;
int irq;
bool pm_suspended;
bool wakeup_pending;
};
static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx)
{
struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3);
u32 val;
if (!dwc3)
return;
val = readl(dwc3_imx->glue_base + USB_WAKEUP_CTRL);
if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci)
val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN |
USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN;
else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN |
USB_WAKEUP_VBUS_SRC_SESS_VAL;
writel(val, dwc3_imx->glue_base + USB_WAKEUP_CTRL);
}
static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx)
{
u32 val;
val = readl(dwc3_imx->glue_base + USB_WAKEUP_CTRL);
val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK);
writel(val, dwc3_imx->glue_base + USB_WAKEUP_CTRL);
}
static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
{
struct dwc3_imx8mp *dwc3_imx = _dwc3_imx;
struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
if (!dwc3_imx->pm_suspended)
return IRQ_HANDLED;
disable_irq_nosync(dwc3_imx->irq);
dwc3_imx->wakeup_pending = true;
if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci)
pm_runtime_resume(&dwc->xhci->dev);
else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE)
pm_runtime_get(dwc->dev);
return IRQ_HANDLED;
}
static int dwc3_imx8mp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *dwc3_np, *node = dev->of_node;
struct dwc3_imx8mp *dwc3_imx;
int err, irq;
if (!node) {
dev_err(dev, "device node not found\n");
return -EINVAL;
}
dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL);
if (!dwc3_imx)
return -ENOMEM;
platform_set_drvdata(pdev, dwc3_imx);
dwc3_imx->dev = dev;
dwc3_imx->glue_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(dwc3_imx->glue_base))
return PTR_ERR(dwc3_imx->glue_base);
dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
if (IS_ERR(dwc3_imx->hsio_clk)) {
err = PTR_ERR(dwc3_imx->hsio_clk);
dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
return err;
}
err = clk_prepare_enable(dwc3_imx->hsio_clk);
if (err) {
dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
return err;
}
dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
if (IS_ERR(dwc3_imx->suspend_clk)) {
err = PTR_ERR(dwc3_imx->suspend_clk);
dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
goto disable_hsio_clk;
}
err = clk_prepare_enable(dwc3_imx->suspend_clk);
if (err) {
dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
goto disable_hsio_clk;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
err = irq;
goto disable_clks;
}
dwc3_imx->irq = irq;
err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
IRQF_ONESHOT, dev_name(dev), dwc3_imx);
if (err) {
dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
goto disable_clks;
}
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
err = pm_runtime_get_sync(dev);
if (err < 0)
goto disable_rpm;
dwc3_np = of_get_child_by_name(node, "dwc3");
if (!dwc3_np) {
dev_err(dev, "failed to find dwc3 core child\n");
goto disable_rpm;
}
err = of_platform_populate(node, NULL, NULL, dev);
if (err) {
dev_err(&pdev->dev, "failed to create dwc3 core\n");
goto err_node_put;
}
dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np);
if (!dwc3_imx->dwc3) {
dev_err(dev, "failed to get dwc3 platform device\n");
err = -ENODEV;
goto depopulate;
}
of_node_put(dwc3_np);
device_set_wakeup_capable(dev, true);
pm_runtime_put(dev);
return 0;
depopulate:
of_platform_depopulate(dev);
err_node_put:
of_node_put(dwc3_np);
disable_rpm:
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
disable_clks:
clk_disable_unprepare(dwc3_imx->suspend_clk);
disable_hsio_clk:
clk_disable_unprepare(dwc3_imx->hsio_clk);
return err;
}
static int dwc3_imx8mp_remove(struct platform_device *pdev)
{
struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
pm_runtime_get_sync(dev);
of_platform_depopulate(dev);
clk_disable_unprepare(dwc3_imx->suspend_clk);
clk_disable_unprepare(dwc3_imx->hsio_clk);
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static int __maybe_unused dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx,
pm_message_t msg)
{
if (dwc3_imx->pm_suspended)
return 0;
/* Wakeup enable */
if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev))
dwc3_imx8mp_wakeup_enable(dwc3_imx);
dwc3_imx->pm_suspended = true;
return 0;
}
static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx,
pm_message_t msg)
{
struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3);
int ret = 0;
if (!dwc3_imx->pm_suspended)
return 0;
/* Wakeup disable */
dwc3_imx8mp_wakeup_disable(dwc3_imx);
dwc3_imx->pm_suspended = false;
if (dwc3_imx->wakeup_pending) {
dwc3_imx->wakeup_pending = false;
if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) {
pm_runtime_mark_last_busy(dwc->dev);
pm_runtime_put_autosuspend(dwc->dev);
} else {
/*
* Add wait for xhci switch from suspend
* clock to normal clock to detect connection.
*/
usleep_range(9000, 10000);
}
enable_irq(dwc3_imx->irq);
}
return ret;
}
static int __maybe_unused dwc3_imx8mp_pm_suspend(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
int ret;
ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND);
if (device_may_wakeup(dwc3_imx->dev))
enable_irq_wake(dwc3_imx->irq);
else
clk_disable_unprepare(dwc3_imx->suspend_clk);
clk_disable_unprepare(dwc3_imx->hsio_clk);
dev_dbg(dev, "dwc3 imx8mp pm suspend.\n");
return ret;
}
static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
int ret;
if (device_may_wakeup(dwc3_imx->dev)) {
disable_irq_wake(dwc3_imx->irq);
} else {
ret = clk_prepare_enable(dwc3_imx->suspend_clk);
if (ret)
return ret;
}
ret = clk_prepare_enable(dwc3_imx->hsio_clk);
if (ret)
return ret;
ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME);
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
dev_dbg(dev, "dwc3 imx8mp pm resume.\n");
return ret;
}
static int __maybe_unused dwc3_imx8mp_runtime_suspend(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n");
return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND);
}
static int __maybe_unused dwc3_imx8mp_runtime_resume(struct device *dev)
{
struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev);
dev_dbg(dev, "dwc3 imx8mp runtime resume.\n");
return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME);
}
static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend, dwc3_imx8mp_pm_resume)
SET_RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend,
dwc3_imx8mp_runtime_resume, NULL)
};
static const struct of_device_id dwc3_imx8mp_of_match[] = {
{ .compatible = "fsl,imx8mp-dwc3", },
{},
};
MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match);
static struct platform_driver dwc3_imx8mp_driver = {
.probe = dwc3_imx8mp_probe,
.remove = dwc3_imx8mp_remove,
.driver = {
.name = "imx8mp-dwc3",
.pm = &dwc3_imx8mp_dev_pm_ops,
.of_match_table = dwc3_imx8mp_of_match,
},
};
module_platform_driver(dwc3_imx8mp_driver);
MODULE_ALIAS("platform:imx8mp-dwc3");
MODULE_AUTHOR("jun.li@nxp.com");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment