Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Seven fixes to four drivers with no core changes.

  The mpt3sas one is theoretical until we get a CPU that goes up to 64
  bits physical, the qla2xxx one fixes an oops in a driver
  initialization error leg and the others are mostly cosmetic"

[ The fcoe patches may be worth highlighting - they may be "just"
  cleanups, but they simplify and fix the odd fc_rport_priv structure
  handling rules so that the new gcc-9 warnings about memset crossing
  structure boundaries are gone.

  The old code was hard for humans to understand too, and really
  confused the compiler sanity checks  - Linus ]

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix possible fcport null-pointer dereferences
  scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
  scsi: hpsa: remove printing internal cdb on tag collision
  scsi: hpsa: correct scsi command status issue after reset
  scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv
  scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
  scsi: libfc: Whitespace cleanup in libfc.h

drivers/scsi/hpsa.c

@@ -2334,6 +2334,8 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h,
 	case IOACCEL2_SERV_RESPONSE_COMPLETE:
 		switch (c2->error_data.status) {
 		case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
+			if (cmd)
+				cmd->result = 0;
 			break;
 		case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
 			cmd->result |= SAM_STAT_CHECK_CONDITION;
@@ -2483,8 +2485,10 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
 
 	/* check for good status */
 	if (likely(c2->error_data.serv_response == 0 &&
-			c2->error_data.status == 0))
+			c2->error_data.status == 0)) {
+		cmd->result = 0;
 		return hpsa_cmd_free_and_done(h, c, cmd);
+	}
 
 	/*
 	 * Any RAID offload error results in retry which will use
@@ -5653,6 +5657,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
 	if (c == NULL)
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 
+	/*
+	 * This is necessary because the SML doesn't zero out this field during
+	 * error recovery.
+	 */
+	cmd->result = 0;
+
 	/*
 	 * Call alternate submit routine for I/O accelerated commands.
 	 * Retries always go down the normal I/O path.
@@ -6081,8 +6091,6 @@ static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
 		if (idx != h->last_collision_tag) { /* Print once per tag */
 			dev_warn(&h->pdev->dev,
 				"%s: tag collision (tag=%d)\n", __func__, idx);
-			if (c->scsi_cmd != NULL)
-				scsi_print_command(c->scsi_cmd);
 			if (scmd)
 				scsi_print_command(scmd);
 			h->last_collision_tag = idx;

drivers/scsi/libfc/fc_rport.c

@@ -128,6 +128,7 @@ EXPORT_SYMBOL(fc_rport_lookup);
 struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id)
 {
 	struct fc_rport_priv *rdata;
+	size_t rport_priv_size = sizeof(*rdata);
 
 	lockdep_assert_held(&lport->disc.disc_mutex);
 
@@ -135,7 +136,9 @@ struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id)
 	if (rdata)
 		return rdata;
 
-	rdata = kzalloc(sizeof(*rdata) + lport->rport_priv_size, GFP_KERNEL);
+	if (lport->rport_priv_size > 0)
+		rport_priv_size = lport->rport_priv_size;
+	rdata = kzalloc(rport_priv_size, GFP_KERNEL);
 	if (!rdata)
 		return NULL;
 

drivers/scsi/mpt3sas/mpt3sas_base.c

@@ -2703,6 +2703,8 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
 {
 	u64 required_mask, coherent_mask;
 	struct sysinfo s;
+	/* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */
+	int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
 
 	if (ioc->is_mcpu_endpoint)
 		goto try_32bit;
@@ -2712,17 +2714,17 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev)
 		goto try_32bit;
 
 	if (ioc->dma_mask)
-		coherent_mask = DMA_BIT_MASK(64);
+		coherent_mask = DMA_BIT_MASK(dma_mask);
 	else
 		coherent_mask = DMA_BIT_MASK(32);
 
-	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) ||
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) ||
 	    dma_set_coherent_mask(&pdev->dev, coherent_mask))
 		goto try_32bit;
 
 	ioc->base_add_sg_single = &_base_add_sg_single_64;
 	ioc->sge_size = sizeof(Mpi2SGESimple64_t);
-	ioc->dma_mask = 64;
+	ioc->dma_mask = dma_mask;
 	goto out;
 
  try_32bit:
@@ -2744,7 +2746,7 @@ static int
 _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc,
 				      struct pci_dev *pdev)
 {
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) {
 		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)))
 			return -ENODEV;
 	}
@@ -4989,7 +4991,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
 		total_sz += sz;
 	} while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
 
-	if (ioc->dma_mask == 64) {
+	if (ioc->dma_mask > 32) {
 		if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) {
 			ioc_warn(ioc, "no suitable consistent DMA mask for %s\n",
 				 pci_name(ioc->pdev));

drivers/scsi/qla2xxx/qla_init.c

@@ -4877,7 +4877,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags)
 		ql_log(ql_log_warn, vha, 0xd049,
 		    "Failed to allocate ct_sns request.\n");
 		kfree(fcport);
-		fcport = NULL;
+		return NULL;
 	}
 
 	INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn);

include/scsi/libfcoe.h

@@ -229,6 +229,7 @@ struct fcoe_fcf {
  * @vn_mac:	VN_Node assigned MAC address for data
  */
 struct fcoe_rport {
+	struct fc_rport_priv rdata;
 	unsigned long time;
 	u16 fcoe_len;
 	u16 flags;