Commit 6ea6b95a authored by Heiner Kallweit's avatar Heiner Kallweit Committed by Ulf Hansson

mmc: meson-gx: fix SDIO mode if cap_sdio_irq isn't set

Some SDIO WiFi modules stopped working after SDIO interrupt mode
was added if cap_sdio_irq isn't set in device tree. This patch was
confirmed to fix the issue.

Fixes: 066ecde6 ("mmc: meson-gx: add SDIO interrupt support")
Reported-by: default avatarGeraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: default avatarGeraldo Nascimento <geraldogabriel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/816cba9f-ff92-31a2-60f0-aca542d1d13e@gmail.comSigned-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent 2241ab53
...@@ -435,6 +435,7 @@ static int meson_mmc_clk_init(struct meson_host *host) ...@@ -435,6 +435,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180); clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0); clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0); clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
clk_reg |= CLK_IRQ_SDIO_SLEEP(host); clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
writel(clk_reg, host->regs + SD_EMMC_CLOCK); writel(clk_reg, host->regs + SD_EMMC_CLOCK);
...@@ -948,16 +949,18 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) ...@@ -948,16 +949,18 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
{ {
struct meson_host *host = dev_id; struct meson_host *host = dev_id;
struct mmc_command *cmd; struct mmc_command *cmd;
u32 status, raw_status; u32 status, raw_status, irq_mask = IRQ_EN_MASK;
irqreturn_t ret = IRQ_NONE; irqreturn_t ret = IRQ_NONE;
if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
irq_mask |= IRQ_SDIO;
raw_status = readl(host->regs + SD_EMMC_STATUS); raw_status = readl(host->regs + SD_EMMC_STATUS);
status = raw_status & (IRQ_EN_MASK | IRQ_SDIO); status = raw_status & irq_mask;
if (!status) { if (!status) {
dev_dbg(host->dev, dev_dbg(host->dev,
"Unexpected IRQ! irq_en 0x%08lx - status 0x%08x\n", "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
IRQ_EN_MASK | IRQ_SDIO, raw_status); irq_mask, raw_status);
return IRQ_NONE; return IRQ_NONE;
} }
...@@ -1204,6 +1207,11 @@ static int meson_mmc_probe(struct platform_device *pdev) ...@@ -1204,6 +1207,11 @@ static int meson_mmc_probe(struct platform_device *pdev)
goto free_host; goto free_host;
} }
mmc->caps |= MMC_CAP_CMD23;
if (mmc->caps & MMC_CAP_SDIO_IRQ)
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
host->data = (struct meson_mmc_data *) host->data = (struct meson_mmc_data *)
of_device_get_match_data(&pdev->dev); of_device_get_match_data(&pdev->dev);
if (!host->data) { if (!host->data) {
...@@ -1277,11 +1285,6 @@ static int meson_mmc_probe(struct platform_device *pdev) ...@@ -1277,11 +1285,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
spin_lock_init(&host->lock); spin_lock_init(&host->lock);
mmc->caps |= MMC_CAP_CMD23;
if (mmc->caps & MMC_CAP_SDIO_IRQ)
mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
if (host->dram_access_quirk) { if (host->dram_access_quirk) {
/* Limit segments to 1 due to low available sram memory */ /* Limit segments to 1 due to low available sram memory */
mmc->max_segs = 1; mmc->max_segs = 1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment