Skip to content

L
linux
Commit 6ed79b63 authored by Jeff Garzik's avatar Jeff Garzik
Browse files
Options

Merge redhat.com:/spare/repo/netdev-2.6/natsemi 

into redhat.com:/spare/repo/netdev-2.6/misc
parents 9f28b416 f1f4d2f6
Hide whitespace changes
Inline Side-by-side
Showing with 4 additions and 965 deletions
drivers/net/68360enet.c deleted 100644 → 0
View file @ 9f28b416
/*
* Ethernet driver for Motorola MPC8xx.
* Copyright (c) 2000 Michael Leslie <mleslie@lineo.com>
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
*
* I copied the basic skeleton from the lance driver, because I did not
* know how to write the Linux driver, but I did know how the LANCE worked.
*
* This version of the driver is somewhat selectable for the different
* processor/board combinations. It works for the boards I know about
* now, and should be easily modified to include others. Some of the
* configuration information is contained in "commproc.h" and the
* remainder is here.
*
* Buffer descriptors are kept in the CPM dual port RAM, and the frame
* buffers are in the host memory.
*
* Right now, I am very watseful with the buffers. I allocate memory
* pages and then divide them into 2K frame buffers. This way I know I
* have buffers large enough to hold one frame within one buffer descriptor.
* Once I get this working, I will use 64 or 128 byte CPM buffers, which
* will be much more memory efficient and will easily handle lots of
* small packets.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <asm/m68360.h>
/* #include <asm/8xx_immap.h> */
/* #include <asm/pgtable.h> */
/* #include <asm/mpc8xx.h> */
#include <asm/bitops.h>
/* #include <asm/uaccess.h> */
#include <asm/commproc.h>
/*
* Theory of Operation
*
* The MPC8xx CPM performs the Ethernet processing on SCC1. It can use
* an aribtrary number of buffers on byte boundaries, but must have at
* least two receive buffers to prevent constant overrun conditions.
*
* The buffer descriptors are allocated from the CPM dual port memory
* with the data buffers allocated from host memory, just like all other
* serial communication protocols. The host memory buffers are allocated
* from the free page pool, and then divided into smaller receive and
* transmit buffers. The size of the buffers should be a power of two,
* since that nicely divides the page. This creates a ring buffer
* structure similar to the LANCE and other controllers.
*
* Like the LANCE driver:
* The driver runs as two independent, single-threaded flows of control. One
* is the send-packet routine, which enforces single-threaded use by the
* cep->tx_busy flag. The other thread is the interrupt handler, which is
* single threaded by the hardware and other software.
*
* The send packet thread has partial control over the Tx ring and the
* 'cep->tx_busy' flag. It sets the tx_busy flag whenever it's queuing a Tx
* packet. If the next queue slot is empty, it clears the tx_busy flag when
* finished otherwise it sets the 'lp->tx_full' flag.
*
* The MBX has a control register external to the MPC8xx that has some
* control of the Ethernet interface. Information is in the manual for
* your board.
*
* The RPX boards have an external control/status register. Consult the
* programming documents for details unique to your board.
*
* For the TQM8xx(L) modules, there is no control register interface.
* All functions are directly controlled using I/O pins. See commproc.h.
*/
/* The transmitter timeout
*/
#define TX_TIMEOUT (2*HZ)
/* The number of Tx and Rx buffers. These are allocated statically here.
* We don't need to allocate pages for the transmitter. We just use
* the skbuffer directly.
*/
#ifdef CONFIG_ENET_BIG_BUFFERS
#define RX_RING_SIZE 64
#define TX_RING_SIZE 64 /* Must be power of two */
#define TX_RING_MOD_MASK 63 /* for this to work */
#else
#define RX_RING_SIZE 8
#define TX_RING_SIZE 8 /* Must be power of two */
#define TX_RING_MOD_MASK 7 /* for this to work */
#endif
#define CPM_ENET_RX_FRSIZE 2048 /* overkill left over from ppc page-based allocation */
static char rx_buf_pool[RX_RING_SIZE * CPM_ENET_RX_FRSIZE];
/* The CPM stores dest/src/type, data, and checksum for receive packets.
*/
#define PKT_MAXBUF_SIZE 1518
#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1520
/* The CPM buffer descriptors track the ring buffers. The rx_bd_base and
* tx_bd_base always point to the base of the buffer descriptors. The
* cur_rx and cur_tx point to the currently available buffer.
* The dirty_tx tracks the current buffer that is being sent by the
* controller. The cur_tx and dirty_tx are equal under both completely
* empty and completely full conditions. The empty/ready indicator in
* the buffer descriptor determines the actual condition.
*/
struct scc_enet_private {
/* The saved address of a sent-in-place packet/buffer, for skfree(). */
struct sk_buff* tx_skbuff[TX_RING_SIZE];
ushort skb_cur;
ushort skb_dirty;
/* CPM dual port RAM relative addresses.
*/
QUICC_BD *rx_bd_base; /* Address of Rx and Tx buffers. */
QUICC_BD *tx_bd_base;
QUICC_BD *cur_rx, *cur_tx; /* The next free ring entry */
QUICC_BD *dirty_tx; /* The ring entries to be free()ed. */
volatile struct scc_regs *sccp;
/* struct net_device_stats stats; */
struct net_device_stats stats;
uint tx_full;
/* spinlock_t lock; */
volatile unsigned int lock;
};
static int scc_enet_open(struct net_device *dev);
static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
static int scc_enet_rx(struct net_device *dev);
static irqreturn_t scc_enet_interrupt(int vec, void *dev_id, struct pt_regs *fp);
static int scc_enet_close(struct net_device *dev);
/* static struct net_device_stats *scc_enet_get_stats(struct net_device *dev); */
static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
static void set_multicast_list(struct net_device *dev);
/* Get this from various configuration locations (depends on board).
*/
/*static ushort my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/
/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards
* use SCC2. This is easily extended if necessary.
*/
#define CONFIG_SCC1_ENET /* by default */
#ifdef CONFIG_SCC1_ENET
#define CPM_CR_ENET CPM_CR_CH_SCC1
#define PROFF_ENET PROFF_SCC1
#define SCC_ENET 0
#define CPMVEC_ENET CPMVEC_SCC1
#endif
#ifdef CONFIG_SCC2_ENET
#define CPM_CR_ENET CPM_CR_CH_SCC2
#define PROFF_ENET PROFF_SCC2
#define SCC_ENET 1 /* Index, not number! */
#define CPMVEC_ENET CPMVEC_SCC2
#endif
static int
scc_enet_open(struct net_device *dev)
{
/* I should reset the ring buffers here, but I don't yet know
* a simple way to do that.
* mleslie: That's no biggie. Worth doing, too.
*/
/* netif_start_queue(dev); */
return 0; /* Always succeed */
}
static int
scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
volatile QUICC_BD *bdp;
/* Fill in a Tx ring entry */
bdp = cep->cur_tx;
#ifndef final_version
if (bdp->status & BD_ENET_TX_READY) {
/* Ooops. All transmit buffers are full. Bail out.
* This should not happen, since cep->tx_busy should be set.
*/
printk("%s: tx queue full!.\n", dev->name);
return 1;
}
#endif
/* Clear all of the status flags.
*/
bdp->status &= ~BD_ENET_TX_STATS;
/* If the frame is short, tell CPM to pad it.
*/
if (skb->len <= ETH_ZLEN)
bdp->status |= BD_ENET_TX_PAD;
else
bdp->status &= ~BD_ENET_TX_PAD;
/* Set buffer length and buffer pointer.
*/
bdp->length = skb->len;
/* bdp->buf = __pa(skb->data); */
bdp->buf = skb->data;
/* Save skb pointer.
*/
cep->tx_skbuff[cep->skb_cur] = skb;
/* cep->stats.tx_bytes += skb->len; */ /* TODO: It would really be nice... */
cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
/* Push the data cache so the CPM does not get stale memory
* data.
*/
/* flush_dcache_range((unsigned long)(skb->data), */
/* (unsigned long)(skb->data + skb->len)); */
/* spin_lock_irq(&cep->lock); */ /* TODO: SPINLOCK */
local_irq_disable();
if (cep->lock > 0) {
printk ("scc_enet_start_xmit() lock == %d\n", cep->lock);
} else {
cep->lock++;
}
/* Send it on its way. Tell CPM its ready, interrupt when done,
* its the last BD of the frame, and to put the CRC on the end.
*/
bdp->status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
dev->trans_start = jiffies;
/* If this was the last BD in the ring, start at the beginning again.
*/
if (bdp->status & BD_ENET_TX_WRAP)
bdp = cep->tx_bd_base;
else
bdp++;
if (bdp->status & BD_ENET_TX_READY) {
/* netif_stop_queue(dev); */
cep->tx_full = 1;
}
cep->cur_tx = (QUICC_BD *)bdp;
/* spin_unlock_irq(&cep->lock); */ /* TODO: SPINLOCK */
cep->lock--;
sti();
return 0;
}
#if 0
static void
scc_enet_timeout(struct net_device *dev)
{
struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
printk("%s: transmit timed out.\n", dev->name);
cep->stats.tx_errors++;
#ifndef final_version
{
int i;
QUICC_BD *bdp;
printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
cep->cur_tx, cep->tx_full ? " (full)" : "",
cep->cur_rx);
bdp = cep->tx_bd_base;
for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
printk("%04x %04x %08x\n",
bdp->status,
bdp->length,
(int)(bdp->buf));
bdp = cep->rx_bd_base;
for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
printk("%04x %04x %08x\n",
bdp->status,
bdp->length,
(int)(bdp->buf));
}
#endif
/* if (!cep->tx_full) */
/* netif_wake_queue(dev); */
}
#endif
/* The interrupt handler.
* This is called from the CPM handler, not the MPC core interrupt.
*/
static irqreturn_t scc_enet_interrupt(int vec, void *dev_id, struct pt_regs *fp)
{
struct net_device *dev = (struct net_device *)dev_id;
volatile struct scc_enet_private *cep;
volatile QUICC_BD *bdp;
ushort int_events;
int must_restart;
cep = (struct scc_enet_private *)dev->priv;
/* Get the interrupt events that caused us to be here.
*/
int_events = cep->sccp->scc_scce;
cep->sccp->scc_scce = int_events;
must_restart = 0;
/* Handle receive event in its own function.
*/
if (int_events & SCCE_ENET_RXF)
scc_enet_rx(dev_id);
/* Check for a transmit error. The manual is a little unclear
* about this, so the debug code until I get it figured out. It
* appears that if TXE is set, then TXB is not set. However,
* if carrier sense is lost during frame transmission, the TXE
* bit is set, "and continues the buffer transmission normally."
* I don't know if "normally" implies TXB is set when the buffer
* descriptor is closed.....trial and error :-).
*/
/* Transmit OK, or non-fatal error. Update the buffer descriptors.
*/
if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
/* spin_lock(&cep->lock); */ /* TODO: SPINLOCK */
/* local_irq_disable(); */
if (cep->lock > 0) {
printk ("scc_enet_interrupt() lock == %d\n", cep->lock);
} else {
cep->lock++;
}
bdp = cep->dirty_tx;
while ((bdp->status&BD_ENET_TX_READY)==0) {
if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
break;
if (bdp->status & BD_ENET_TX_HB) /* No heartbeat */
cep->stats.tx_heartbeat_errors++;
if (bdp->status & BD_ENET_TX_LC) /* Late collision */
cep->stats.tx_window_errors++;
if (bdp->status & BD_ENET_TX_RL) /* Retrans limit */
cep->stats.tx_aborted_errors++;
if (bdp->status & BD_ENET_TX_UN) /* Underrun */
cep->stats.tx_fifo_errors++;
if (bdp->status & BD_ENET_TX_CSL) /* Carrier lost */
cep->stats.tx_carrier_errors++;
/* No heartbeat or Lost carrier are not really bad errors.
* The others require a restart transmit command.
*/
if (bdp->status &
(BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
must_restart = 1;
cep->stats.tx_errors++;
}
cep->stats.tx_packets++;
/* Deferred means some collisions occurred during transmit,
* but we eventually sent the packet OK.
*/
if (bdp->status & BD_ENET_TX_DEF)
cep->stats.collisions++;
/* Free the sk buffer associated with this last transmit.
*/
/* dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]); */
dev_kfree_skb (cep->tx_skbuff[cep->skb_dirty]);
cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
/* Update pointer to next buffer descriptor to be transmitted.
*/
if (bdp->status & BD_ENET_TX_WRAP)
bdp = cep->tx_bd_base;
else
bdp++;
/* I don't know if we can be held off from processing these
* interrupts for more than one frame time. I really hope
* not. In such a case, we would now want to check the
* currently available BD (cur_tx) and determine if any
* buffers between the dirty_tx and cur_tx have also been
* sent. We would want to process anything in between that
* does not have BD_ENET_TX_READY set.
*/
/* Since we have freed up a buffer, the ring is no longer
* full.
*/
if (cep->tx_full) {
cep->tx_full = 0;
/* if (netif_queue_stopped(dev)) */
/* netif_wake_queue(dev); */
}
cep->dirty_tx = (QUICC_BD *)bdp;
}
if (must_restart) {
volatile QUICC *cp;
/* Some transmit errors cause the transmitter to shut
* down. We now issue a restart transmit. Since the
* errors close the BD and update the pointers, the restart
* _should_ pick up without having to reset any of our
* pointers either.
*/
cp = pquicc;
cp->cp_cr =
mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
}
/* spin_unlock(&cep->lock); */ /* TODO: SPINLOCK */
/* sti(); */
cep->lock--;
}
/* Check for receive busy, i.e. packets coming but no place to
* put them. This "can't happen" because the receive interrupt
* is tossing previous frames.
*/
if (int_events & SCCE_ENET_BSY) {
cep->stats.rx_dropped++;
printk("CPM ENET: BSY can't happen.\n");
}
return IRQ_HANDLED;
}
/* During a receive, the cur_rx points to the current incoming buffer.
* When we update through the ring, if the next incoming buffer has
* not been given to the system, we just set the empty indicator,
* effectively tossing the packet.
*/
static int
scc_enet_rx(struct net_device *dev)
{
struct scc_enet_private *cep;
volatile QUICC_BD *bdp;
struct sk_buff *skb;
ushort pkt_len;
cep = (struct scc_enet_private *)dev->priv;
/* First, grab all of the stats for the incoming packet.
* These get messed up if we get called due to a busy condition.
*/
bdp = cep->cur_rx;
for (;;) {
if (bdp->status & BD_ENET_RX_EMPTY)
break;
#ifndef final_version
/* Since we have allocated space to hold a complete frame, both
* the first and last indicators should be set.
*/
if ((bdp->status & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
printk("CPM ENET: rcv is not first+last\n");
#endif
/* Frame too long or too short.
*/
if (bdp->status & (BD_ENET_RX_LG | BD_ENET_RX_SH))
cep->stats.rx_length_errors++;
if (bdp->status & BD_ENET_RX_NO) /* Frame alignment */
cep->stats.rx_frame_errors++;
if (bdp->status & BD_ENET_RX_CR) /* CRC Error */
cep->stats.rx_crc_errors++;
if (bdp->status & BD_ENET_RX_OV) /* FIFO overrun */
cep->stats.rx_crc_errors++;
/* Report late collisions as a frame error.
* On this error, the BD is closed, but we don't know what we
* have in the buffer. So, just drop this frame on the floor.
*/
if (bdp->status & BD_ENET_RX_CL) {
cep->stats.rx_frame_errors++;
}
else {
/* Process the incoming frame.
*/
cep->stats.rx_packets++;
pkt_len = bdp->length;
/* cep->stats.rx_bytes += pkt_len; */ /* TODO: It would really be nice... */
/* This does 16 byte alignment, much more than we need.
* The packet length includes FCS, but we don't want to
* include that when passing upstream as it messes up
* bridging applications.
*/
skb = dev_alloc_skb(pkt_len-4);
if (skb == NULL) {
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
cep->stats.rx_dropped++;
}
else {
skb->dev = dev;
skb_put(skb,pkt_len-4); /* Make room */
eth_copy_and_sum(skb, (unsigned char *)bdp->buf, pkt_len-4, 0);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
}
/* Clear the status flags for this buffer.
*/
bdp->status &= ~BD_ENET_RX_STATS;
/* Mark the buffer empty.
*/
bdp->status |= BD_ENET_RX_EMPTY;
/* Update BD pointer to next entry.
*/
if (bdp->status & BD_ENET_RX_WRAP)
bdp = cep->rx_bd_base;
else
bdp++;
}
cep->cur_rx = (QUICC_BD *)bdp;
return 0;
}
static int
scc_enet_close(struct net_device *dev)
{
/* Don't know what to do yet.
*/
/* netif_stop_queue(dev); */
return 0;
}
/* static struct net_device_stats *scc_enet_get_stats(struct net_device *dev) */
static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
{
struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
return &cep->stats;
}
/* Set or clear the multicast filter for this adaptor.
* Skeleton taken from sunlance driver.
* The CPM Ethernet implementation allows Multicast as well as individual
* MAC address filtering. Some of the drivers check to make sure it is
* a group multicast address, and discard those that are not. I guess I
* will do the same for now, but just remove the test if you want
* individual filtering as well (do the upper net layers want or support
* this kind of feature?).
*/
static void set_multicast_list(struct net_device *dev)
{
struct scc_enet_private *cep;
struct dev_mc_list *dmi;
u_char *mcptr, *tdptr;
volatile scc_enet_t *ep;
int i, j;
volatile QUICC *cp = pquicc;
cep = (struct scc_enet_private *)dev->priv;
/* Get pointer to SCC area in parameter RAM.
*/
ep = (scc_enet_t *)dev->base_addr;
if (dev->flags&IFF_PROMISC) {
/* Log any net taps. */
printk("%s: Promiscuous mode enabled.\n", dev->name);
cep->sccp->scc_psmr |= ETHER_PRO;
} else {
cep->sccp->scc_psmr &= ~ETHER_PRO;
if (dev->flags & IFF_ALLMULTI) {
/* Catch all multicast addresses, so set the
* filter to all 1's.
*/
ep->sen_gaddr1 = 0xffff;
ep->sen_gaddr2 = 0xffff;
ep->sen_gaddr3 = 0xffff;
ep->sen_gaddr4 = 0xffff;
}
else {
/* Clear filter and add the addresses in the list.
*/
ep->sen_gaddr1 = 0;
ep->sen_gaddr2 = 0;
ep->sen_gaddr3 = 0;
ep->sen_gaddr4 = 0;
dmi = dev->mc_list;
for (i=0; i<dev->mc_count; i++) {
/* Only support group multicast for now.
*/
if (!(dmi->dmi_addr[0] & 1))
continue;
/* The address in dmi_addr is LSB first,
* and taddr is MSB first. We have to
* copy bytes MSB first from dmi_addr.
*/
mcptr = (u_char *)dmi->dmi_addr + 5;
tdptr = (u_char *)&ep->sen_taddrh;
for (j=0; j<6; j++)
*tdptr++ = *mcptr--;
/* Ask CPM to run CRC and set bit in
* filter mask.
*/
cp->cp_cr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG;
/* this delay is necessary here -- Cort */
udelay(10);
while (cp->cp_cr & CPM_CR_FLG);
}
}
}
}
/* Initialize the CPM Ethernet on SCC.
*/
int scc_enet_init(void)
{
struct net_device *dev;
struct scc_enet_private *cep;
int i, j;
unsigned char *eap;
/* unsigned long mem_addr; */
/* pte_t *pte; */
/* bd_t *bd; */ /* `board tag' used by ppc - TODO: integrate uC bootloader vars */
volatile QUICC_BD *bdp;
volatile QUICC *cp;
volatile struct scc_regs *sccp;
volatile struct ethernet_pram *ep;
/* volatile immap_t *immap; */
cp = pquicc; /* Get pointer to Communication Processor */
/* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */
/* bd = (bd_t *)__res; */
/* Allocate some private information.
*/
cep = (struct scc_enet_private *)kmalloc(sizeof(*cep), GFP_KERNEL);
memset(cep, 0, sizeof(*cep));
/* __clear_user(cep,sizeof(*cep)); */
/* spin_lock_init(&cep->lock); */ /* TODO: SPINLOCK */
/* Create an Ethernet device instance.
*/
dev = init_etherdev(0, 0);
/* Get pointer to SCC area in parameter RAM.
*/
/* ep = (ethernet_pram *)(&cp->cp_dparam[PROFF_ENET]); */
ep = &pquicc->pram[SCC_ENET].enet_scc;
/* And another to the SCC register area.
*/
sccp = &pquicc->scc_regs[SCC_ENET];
cep->sccp = sccp; /* Keep the pointer handy */
/* Disable receive and transmit in case EPPC-Bug started it.
*/
sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
/* Set up 360 pins for SCC interface to ethernet transceiver.
* Pin mappings (PA_xx and PC_xx) are defined in commproc.h
*/
/* Configure port A pins for Txd and Rxd.
*/
pquicc->pio_papar |= (PA_ENET_RXD | PA_ENET_TXD);
pquicc->pio_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
pquicc->pio_paodr &= ~PA_ENET_TXD;
/* Configure port C pins to enable CLSN and RENA.
*/
pquicc->pio_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
pquicc->pio_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
pquicc->pio_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
/* Configure port A for TCLK and RCLK.
*/
pquicc->pio_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
pquicc->pio_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
/* Configure Serial Interface clock routing.
* First, clear all SCC bits to zero, then set the ones we want.
*/
pquicc->si_sicr &= ~SICR_ENET_MASK;
pquicc->si_sicr |= SICR_ENET_CLKRT;
/* Allocate space for the buffer descriptors in the DP ram.
* These are relative offsets in the DP ram address space.
* Initialize base addresses for the buffer descriptors.
*/
i = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_RING_SIZE);
ep->rbase = i;
cep->rx_bd_base = (QUICC_BD *)((uint)pquicc + i);
i = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_RING_SIZE);
ep->tbase = i;
cep->tx_bd_base = (QUICC_BD *)((uint)pquicc + i);
cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
cep->cur_rx = cep->rx_bd_base;
/* Issue init Rx BD command for SCC.
* Manual says to perform an Init Rx parameters here. We have
* to perform both Rx and Tx because the SCC may have been
* already running. [In uCquicc's case, I don't think that is so - mles]
* In addition, we have to do it later because we don't yet have
* all of the BD control/status set properly.
cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
while (cp->cp_cpcr & CPM_CR_FLG);
*/
/* Initialize function code registers for big-endian.
*/
ep->rfcr = (SCC_EB | SCC_FC_DMA);
ep->tfcr = (SCC_EB | SCC_FC_DMA);
/* Set maximum bytes per receive buffer.
* This appears to be an Ethernet frame size, not the buffer
* fragment size. It must be a multiple of four.
*/
ep->mrblr = PKT_MAXBLR_SIZE;
/* Set CRC preset and mask.
*/
ep->c_pres = 0xffffffff;
ep->c_mask = 0xdebb20e3; /* see 360UM p. 7-247 */
ep->crcec = 0; /* CRC Error counter */
ep->alec = 0; /* alignment error counter */
ep->disfc = 0; /* discard frame counter */
ep->pads = 0x8888; /* Tx short frame pad character */
ep->ret_lim = 0x000f; /* Retry limit threshold */
ep->mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
ep->minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
ep->maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */
ep->maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */
/* Clear hash tables, group and individual.
*/
ep->gaddr1 = ep->gaddr2 = ep->gaddr3 = ep->gaddr4 = 0;
ep->iaddr1 = ep->iaddr2 = ep->iaddr3 = ep->iaddr4 = 0;
/* Set Ethernet station address.
*
* The uCbootloader provides a hook to the kernel to retrieve
* stuff like the MAC address. This is retrieved in config_BSP()
*/
#if defined (CONFIG_UCQUICC)
{
extern unsigned char *scc1_hwaddr;
eap = (char *)ep->paddr.b;
for (i=5; i>=0; i--)
*eap++ = dev->dev_addr[i] = scc1_hwaddr[i];
}
#endif
/* #ifndef CONFIG_MBX */
/* eap = (unsigned char *)&(ep->paddrh); */
/* for (i=5; i>=0; i--) */
/* *eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i]; */
/* #else */
/* for (i=5; i>=0; i--) */
/* dev->dev_addr[i] = *eap++; */
/* #endif */
ep->p_per = 0; /* 'cause the book says so */
ep->taddr_l = 0; /* temp address (LSB) */
ep->taddr_m = 0;
ep->taddr_h = 0; /* temp address (MSB) */
/* Now allocate the host memory pages and initialize the
* buffer descriptors.
*/
/* initialize rx buffer descriptors */
bdp = cep->tx_bd_base;
for (j=0; j<(TX_RING_SIZE-1); j++) {
bdp->buf = 0;
bdp->status = 0;
bdp++;
}
bdp->buf = 0;
bdp->status = BD_SC_WRAP;
/* initialize rx buffer descriptors */
bdp = cep->rx_bd_base;
for (j=0; j<(RX_RING_SIZE-1); j++) {
bdp->buf = &rx_buf_pool[j * CPM_ENET_RX_FRSIZE];
bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
bdp++;
}
bdp->buf = &rx_buf_pool[j * CPM_ENET_RX_FRSIZE];
bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
/* Let's re-initialize the channel now. We have to do it later
* than the manual describes because we have just now finished
* the BD initialization.
*/
cp->cp_cr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cr & CPM_CR_FLG);
cep->skb_cur = cep->skb_dirty = 0;
sccp->scc_scce = 0xffff; /* Clear any pending events */
/* Enable interrupts for transmit error, complete frame
* received, and any transmit buffer we have also set the
* interrupt flag.
*/
sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
/* Install our interrupt handler.
*/
/* cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev); */
request_irq(CPMVEC_ENET, scc_enet_interrupt,
IRQ_FLG_LOCK, dev->name, (void *)dev);
/* Set GSMR_H to enable all normal operating modes.
* Set GSMR_L to enable Ethernet to MC68160.
*/
sccp->scc_gsmr.w.high = 0;
sccp->scc_gsmr.w.low = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 |
SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
/* Set sync/delimiters.
*/
sccp->scc_dsr = 0xd555;
/* Set processing mode. Use Ethernet CRC, catch broadcast, and
* start frame search 22 bit times after RENA.
*/
sccp->scc_psmr = (SCC_PMSR_ENCRC /* Ethernet CRC mode */
/* | SCC_PSMR_HBC */ /* Enable heartbeat */
/* | SCC_PMSR_PRO */ /* Promiscuous mode */
/* | SCC_PMSR_FDE */ /* Full duplex enable */
| ETHER_NIB_22);
/* sccp->scc_psmr = (SCC_PMSR_PRO | ETHER_CRC_32 | ETHER_NIB_22); */
/* It is now OK to enable the Ethernet transmitter.
* Unfortunately, there are board implementation differences here.
*/
#if defined(CONFIG_UCQUICC)
/* immap->im_ioport.iop_pcpar |= PC_ENET_TENA; */
/* immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; */
cp->pio_pcpar |= PC_ENET_TENA; /* t_en */
cp->pio_pcdir &= ~PC_ENET_TENA;
cp->pip_pbpar &= ~(0x00000200); /* power up ethernet transceiver */
cp->pip_pbdir |= (0x00000200);
cp->pip_pbdat |= (0x00000200);
#endif
dev->base_addr = (unsigned long)ep;
dev->priv = cep;
#if 0
dev->name = "CPM_ENET";
#endif
/* The CPM Ethernet specific entries in the device structure. */
dev->open = scc_enet_open;
dev->hard_start_xmit = scc_enet_start_xmit;
/* dev->tx_timeout = scc_enet_timeout; */
/* dev->watchdog_timeo = TX_TIMEOUT; */
dev->stop = scc_enet_close;
dev->get_stats = scc_enet_get_stats;
dev->set_multicast_list = set_multicast_list;
/* And last, enable the transmit and receive processing.
*/
sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
printk("%s: CPM ENET Version 0.3, ", dev->name);
for (i=0; i<5; i++)
printk("%02x:", dev->dev_addr[i]);
printk("%02x\n", dev->dev_addr[5]);
return 0;
}
int m68360_enet_probe(struct device *dev)
{
return(scc_enet_init ());
}
/*
* Local variables:
* c-indent-level: 4
* c-basic-offset: 4
* tab-width: 4
* End:
*/
drivers/net/ne2k-pci.c
View file @ 6ed79b63
...@@ -115,6 +115,7 @@ enum ne2k_pci_chipsets { ...@@ -115,6 +115,7 @@ enum ne2k_pci_chipsets {
CH_Winbond_W89C940F, CH_Winbond_W89C940F,
CH_Holtek_HT80232, CH_Holtek_HT80232,
CH_Holtek_HT80229, CH_Holtek_HT80229,
CH_Winbond_89C940_8c4a,
}; };
...@@ -132,6 +133,7 @@ static struct { ...@@ -132,6 +133,7 @@ static struct {
{"Winbond W89C940F", 0}, {"Winbond W89C940F", 0},
{"Holtek HT80232", ONLY_16BIT_IO | HOLTEK_FDX}, {"Holtek HT80232", ONLY_16BIT_IO | HOLTEK_FDX},
{"Holtek HT80229", ONLY_32BIT_IO | HOLTEK_FDX | STOP_PG_0x60 }, {"Holtek HT80229", ONLY_32BIT_IO | HOLTEK_FDX | STOP_PG_0x60 },
{"Winbond W89C940(misprogrammed)", 0},
{0,} {0,}
}; };
...@@ -147,6 +149,7 @@ static struct pci_device_id ne2k_pci_tbl[] = { ...@@ -147,6 +149,7 @@ static struct pci_device_id ne2k_pci_tbl[] = {
{ 0x1050, 0x5a5a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_W89C940F }, { 0x1050, 0x5a5a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_W89C940F },
{ 0x12c3, 0x0058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80232 }, { 0x12c3, 0x0058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80232 },
{ 0x12c3, 0x5598, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80229 }, { 0x12c3, 0x5598, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Holtek_HT80229 },
{ 0x8c4a, 0x1980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_Winbond_89C940_8c4a },
{ 0, } { 0, }
}; };
MODULE_DEVICE_TABLE(pci, ne2k_pci_tbl); MODULE_DEVICE_TABLE(pci, ne2k_pci_tbl);
......
drivers/net/starfire.c
View file @ 6ed79b63
...@@ -139,7 +139,6 @@ TODO: bugfixes (no bugs known as of right now) ...@@ -139,7 +139,6 @@ TODO: bugfixes (no bugs known as of right now)
#include <linux/config.h> #include <linux/config.h>
#include <linux/version.h> #include <linux/version.h>
#include <linux/module.h> #include <linux/module.h>
#include <asm/io.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/netdevice.h> #include <linux/netdevice.h>
......
drivers/net/tokenring/smctr.c
View file @ 6ed79b63
...@@ -729,10 +729,6 @@ static int smctr_close(struct net_device *dev) ...@@ -729,10 +729,6 @@ static int smctr_close(struct net_device *dev)
netif_stop_queue(dev); netif_stop_queue(dev);
#ifdef MODULE
MOD_DEC_USE_COUNT;
#endif
tp->cleanup = 1; tp->cleanup = 1;
/* Check to see if adapter is already in a closed state. */ /* Check to see if adapter is already in a closed state. */
...@@ -3490,10 +3486,6 @@ static int smctr_open(struct net_device *dev) ...@@ -3490,10 +3486,6 @@ static int smctr_open(struct net_device *dev)
if(err < 0) if(err < 0)
return (err); return (err);
#ifdef MODULE
MOD_INC_USE_COUNT;
#endif
return (err); return (err);
} }
......
drivers/net/wan/farsync.c
View file @ 6ed79b63
...@@ -1313,8 +1313,6 @@ fst_open ( struct net_device *dev ) ...@@ -1313,8 +1313,6 @@ fst_open ( struct net_device *dev )
if ( err ) if ( err )
return err; return err;
MOD_INC_USE_COUNT;
fst_openport ( dev_to_port ( dev )); fst_openport ( dev_to_port ( dev ));
netif_wake_queue ( dev ); netif_wake_queue ( dev );
return 0; return 0;
...@@ -1326,7 +1324,6 @@ fst_close ( struct net_device *dev ) ...@@ -1326,7 +1324,6 @@ fst_close ( struct net_device *dev )
netif_stop_queue ( dev ); netif_stop_queue ( dev );
fst_closeport ( dev_to_port ( dev )); fst_closeport ( dev_to_port ( dev ));
hdlc_close ( dev_to_hdlc ( dev )); hdlc_close ( dev_to_hdlc ( dev ));
MOD_DEC_USE_COUNT;
return 0; return 0;
} }
......
drivers/net/wan/pc300_drv.c
View file @ 6ed79b63
...@@ -3165,7 +3165,6 @@ int cpc_open(struct net_device *dev) ...@@ -3165,7 +3165,6 @@ int cpc_open(struct net_device *dev)
return result; return result;
} }
MOD_INC_USE_COUNT;
sprintf(ifr.ifr_name, "%s", dev->name); sprintf(ifr.ifr_name, "%s", dev->name);
cpc_opench(d); cpc_opench(d);
netif_start_queue(dev); netif_start_queue(dev);
...@@ -3201,7 +3200,6 @@ int cpc_close(struct net_device *dev) ...@@ -3201,7 +3200,6 @@ int cpc_close(struct net_device *dev)
} }
#endif #endif
MOD_DEC_USE_COUNT;
return 0; return 0;
} }
......
drivers/net/wireless/orinoco_pci.c
View file @ 6ed79b63
...@@ -360,6 +360,7 @@ static int orinoco_pci_resume(struct pci_dev *pdev) ...@@ -360,6 +360,7 @@ static int orinoco_pci_resume(struct pci_dev *pdev)
} }
static struct pci_device_id orinoco_pci_pci_id_table[] = { static struct pci_device_id orinoco_pci_pci_id_table[] = {
{0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
{0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,}, {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
{0,}, {0,},
}; };
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7