Commit 6f4638a1 authored by zain wang's avatar zain wang Committed by Andrzej Hajda

drm/bridge: analogix_dp: Move fast link training detect to set_bridge

It's too early to detect fast link training, if other step after it
failed, we will set fast_link flag to 1, and retry set_bridge again. In
this case we will power down and power up panel power supply, and we
will do fast link training since we have set fast_link flag to 1. In
fact, we should do full link training now, not the fast link training.
So we should move the fast link detection at the end of set_bridge.

Cc: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: default avatarzain wang <wzz@rock-chips.com>
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarThierry Escande <thierry.escande@collabora.com>
Reviewed-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: default avatarEnric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarArchit Taneja <architt@codeaurora.org>
Signed-off-by: default avatarAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-18-enric.balletbo@collabora.com
parent 4805b7ce
......@@ -601,7 +601,7 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp)
{
int lane, lane_count, retval;
u32 reg;
u8 link_align, link_status[2], adjust_request[2], spread;
u8 link_align, link_status[2], adjust_request[2];
usleep_range(400, 401);
......@@ -645,20 +645,6 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp)
dev_dbg(dp->dev, "final lane count = %.2x\n",
dp->link_train.lane_count);
retval = drm_dp_dpcd_readb(&dp->aux, DP_MAX_DOWNSPREAD,
&spread);
if (retval != 1) {
dev_err(dp->dev, "failed to read downspread %d\n",
retval);
dp->fast_train_enable = false;
} else {
dp->fast_train_enable =
(spread & DP_NO_AUX_HANDSHAKE_LINK_TRAINING) ?
true : false;
}
dev_dbg(dp->dev, "fast link training %s\n",
dp->fast_train_enable ? "supported" : "unsupported");
dp->link_train.lt_state = FINISHED;
return 0;
......@@ -996,6 +982,22 @@ static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
return IRQ_HANDLED;
}
static int analogix_dp_fast_link_train_detection(struct analogix_dp_device *dp)
{
int ret;
u8 spread;
ret = drm_dp_dpcd_readb(&dp->aux, DP_MAX_DOWNSPREAD, &spread);
if (ret != 1) {
dev_err(dp->dev, "failed to read downspread %d\n", ret);
return ret;
}
dp->fast_train_enable = !!(spread & DP_NO_AUX_HANDSHAKE_LINK_TRAINING);
dev_dbg(dp->dev, "fast link training %s\n",
dp->fast_train_enable ? "supported" : "unsupported");
return 0;
}
static int analogix_dp_commit(struct analogix_dp_device *dp)
{
int ret;
......@@ -1038,8 +1040,16 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
if (ret)
return ret;
if (dp->psr_enable)
if (dp->psr_enable) {
ret = analogix_dp_enable_sink_psr(dp);
if (ret)
return ret;
}
/* Check whether panel supports fast training */
ret = analogix_dp_fast_link_train_detection(dp);
if (ret)
dp->psr_enable = false;
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment