Commit 6fc21117 authored by Jose Abreu's avatar Jose Abreu Committed by David S. Miller

net: stmmac: Add MDIO related functions for XGMAC2

Add the MDIO related funcionalities for the new IP block XGMAC2.
Signed-off-by: default avatarJose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 874dfb65
......@@ -29,6 +29,7 @@
#include <linux/phy.h>
#include <linux/slab.h>
#include "dwxgmac2.h"
#include "stmmac.h"
#define MII_BUSY 0x00000001
......@@ -39,6 +40,115 @@
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
/* XGMAC defines */
#define MII_XGMAC_SADDR BIT(18)
#define MII_XGMAC_CMD_SHIFT 16
#define MII_XGMAC_WRITE (1 << MII_XGMAC_CMD_SHIFT)
#define MII_XGMAC_READ (3 << MII_XGMAC_CMD_SHIFT)
#define MII_XGMAC_BUSY BIT(22)
#define MII_XGMAC_MAX_C22ADDR 3
#define MII_XGMAC_C22P_MASK GENMASK(MII_XGMAC_MAX_C22ADDR, 0)
static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr,
int phyreg, u32 *hw_addr)
{
unsigned int mii_data = priv->hw->mii.data;
u32 tmp;
/* HW does not support C22 addr >= 4 */
if (phyaddr > MII_XGMAC_MAX_C22ADDR)
return -ENODEV;
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
!(tmp & MII_XGMAC_BUSY), 100, 10000))
return -EBUSY;
/* Set port as Clause 22 */
tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
tmp &= ~MII_XGMAC_C22P_MASK;
tmp |= BIT(phyaddr);
writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
*hw_addr = (phyaddr << 16) | (phyreg & 0x1f);
return 0;
}
static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
u32 tmp, addr, value = MII_XGMAC_BUSY;
int ret;
if (phyreg & MII_ADDR_C45) {
return -EOPNOTSUPP;
} else {
ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
if (ret)
return ret;
}
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
value |= MII_XGMAC_SADDR | MII_XGMAC_READ;
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
!(tmp & MII_XGMAC_BUSY), 100, 10000))
return -EBUSY;
/* Set the MII address register to read */
writel(addr, priv->ioaddr + mii_address);
writel(value, priv->ioaddr + mii_data);
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
!(tmp & MII_XGMAC_BUSY), 100, 10000))
return -EBUSY;
/* Read the data from the MII data register */
return readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
}
static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
int phyreg, u16 phydata)
{
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv = netdev_priv(ndev);
unsigned int mii_address = priv->hw->mii.addr;
unsigned int mii_data = priv->hw->mii.data;
u32 addr, tmp, value = MII_XGMAC_BUSY;
int ret;
if (phyreg & MII_ADDR_C45) {
return -EOPNOTSUPP;
} else {
ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
if (ret)
return ret;
}
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
& priv->hw->mii.clk_csr_mask;
value |= phydata | MII_XGMAC_SADDR;
value |= MII_XGMAC_WRITE;
/* Wait until any existing MII operation is complete */
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
!(tmp & MII_XGMAC_BUSY), 100, 10000))
return -EBUSY;
/* Set the MII address register to write */
writel(addr, priv->ioaddr + mii_address);
writel(value, priv->ioaddr + mii_data);
/* Wait until any existing MII operation is complete */
return readl_poll_timeout(priv->ioaddr + mii_data, tmp,
!(tmp & MII_XGMAC_BUSY), 100, 10000);
}
/**
* stmmac_mdio_read
* @bus: points to the mii_bus structure
......@@ -205,7 +315,7 @@ int stmmac_mdio_register(struct net_device *ndev)
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
struct device_node *mdio_node = priv->plat->mdio_node;
struct device *dev = ndev->dev.parent;
int addr, found;
int addr, found, max_addr;
if (!mdio_bus_data)
return 0;
......@@ -223,8 +333,23 @@ int stmmac_mdio_register(struct net_device *ndev)
#endif
new_bus->name = "stmmac";
if (priv->plat->has_xgmac) {
new_bus->read = &stmmac_xgmac2_mdio_read;
new_bus->write = &stmmac_xgmac2_mdio_write;
/* Right now only C22 phys are supported */
max_addr = MII_XGMAC_MAX_C22ADDR + 1;
/* Check if DT specified an unsupported phy addr */
if (priv->plat->phy_addr > MII_XGMAC_MAX_C22ADDR)
dev_err(dev, "Unsupported phy_addr (max=%d)\n",
MII_XGMAC_MAX_C22ADDR);
} else {
new_bus->read = &stmmac_mdio_read;
new_bus->write = &stmmac_mdio_write;
max_addr = PHY_MAX_ADDR;
}
new_bus->reset = &stmmac_mdio_reset;
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
......@@ -243,7 +368,7 @@ int stmmac_mdio_register(struct net_device *ndev)
goto bus_register_done;
found = 0;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
for (addr = 0; addr < max_addr; addr++) {
struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
if (!phydev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment