MN10300: Handle removal of struct uart_info

Commit ebd2c8f6 removed struct uart_info and
commit bdc04e31 further moved delta_msr_wait.
Fix up the MN10300 on-chip serial port drivers to comply with this.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/mn10300/kernel/asm-offsets.c

@@ -85,7 +85,7 @@ void foo(void)
 	OFFSET(__rx_buffer,		mn10300_serial_port, rx_buffer);
 	OFFSET(__rx_inp,		mn10300_serial_port, rx_inp);
 	OFFSET(__rx_outp,		mn10300_serial_port, rx_outp);
-	OFFSET(__tx_info_buffer,	mn10300_serial_port, uart.info);
+	OFFSET(__uart_state,		mn10300_serial_port, uart.state);
 	OFFSET(__tx_xchar,		mn10300_serial_port, tx_xchar);
 	OFFSET(__tx_break,		mn10300_serial_port, tx_break);
 	OFFSET(__intr_flags,		mn10300_serial_port, intr_flags);

arch/mn10300/kernel/mn10300-serial-low.S

@@ -130,7 +130,7 @@ ENTRY(mn10300_serial_vdma_tx_handler)
 	or	d2,d2
 	bne	mnsc_vdma_tx_xchar
 
-	mov	(__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+	mov	(__uart_state,a3),a2	# see if the TTY Tx queue has anything in it
 	mov	(__xmit_tail,a2),d3
 	mov	(__xmit_head,a2),d2
 	cmp	d3,d2

arch/mn10300/kernel/mn10300-serial.c

@@ -391,7 +391,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.info->port.tty;
+	struct tty_struct *tty = port->uart.state->port.tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
@@ -566,16 +566,16 @@ static void mn10300_serial_transmit_interrupt(struct mn10300_serial_port *port)
 {
 	_enter("%s", port->name);
 
-	if (!port->uart.info || !port->uart.info->port.tty) {
+	if (!port->uart.state || !port->uart.state->port.tty) {
 		mn10300_serial_dis_tx_intr(port);
 		return;
 	}
 
 	if (uart_tx_stopped(&port->uart) ||
-	    uart_circ_empty(&port->uart.info->xmit))
+	    uart_circ_empty(&port->uart.state->xmit))
 		mn10300_serial_dis_tx_intr(port);
 
-	if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+	if (uart_circ_chars_pending(&port->uart.state->xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(&port->uart);
 }
 
@@ -596,7 +596,7 @@ static void mn10300_serial_cts_changed(struct mn10300_serial_port *port, u8 st)
 	*port->_control = ctr;
 
 	uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
-	wake_up_interruptible(&port->uart.info->delta_msr_wait);
+	wake_up_interruptible(&port->uart.state->port.delta_msr_wait);
 }
 
 /*
@@ -705,8 +705,8 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
 
 	_enter("%s{%lu}",
 	       port->name,
-	       CIRC_CNT(&port->uart.info->xmit.head,
-			&port->uart.info->xmit.tail,
+	       CIRC_CNT(&port->uart.state->xmit.head,
+			&port->uart.state->xmit.tail,
 			UART_XMIT_SIZE));
 
 	/* kick the virtual DMA controller */