Commit 705e0984 authored by Rabin Vincent's avatar Rabin Vincent Committed by Linus Walleij

mach-ux500: dynamic UIB (user interface boards) detection

Add support for dynamic detection of the UIB used (at the cost of one i2c error
on the lesser-used UIB) and also provide an override via a command line
parameter if needed.
Signed-off-by: default avatarRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: default avatarSundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 871056e7
...@@ -8,7 +8,9 @@ obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o ...@@ -8,7 +8,9 @@ obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-keypads.o \ board-mop500-keypads.o \
board-mop500-regulators.o board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
......
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License terms: GNU General Public License (GPL), version 2
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include "board-mop500.h"
void __init mop500_stuib_init(void)
{
}
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License terms: GNU General Public License (GPL), version 2
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include "board-mop500.h"
void __init mop500_u8500uib_init(void)
{
}
/*
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
* License terms: GNU General Public License (GPL), version 2
*/
#define pr_fmt(fmt) "mop500-uib: " fmt
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <mach/hardware.h>
#include "board-mop500.h"
enum mop500_uib {
STUIB,
U8500UIB,
};
struct uib {
const char *name;
const char *option;
void (*init)(void);
};
static struct __initdata uib mop500_uibs[] = {
[STUIB] = {
.name = "ST-UIB",
.option = "stuib",
.init = mop500_stuib_init,
},
[U8500UIB] = {
.name = "U8500-UIB",
.option = "u8500uib",
.init = mop500_u8500uib_init,
},
};
static struct uib *mop500_uib;
static int __init mop500_uib_setup(char *str)
{
int i;
for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
struct uib *uib = &mop500_uibs[i];
if (!strcmp(str, uib->option)) {
mop500_uib = uib;
break;
}
}
if (i == ARRAY_SIZE(mop500_uibs))
pr_err("invalid uib= option (%s)\n", str);
return 1;
}
__setup("uib=", mop500_uib_setup);
/*
* The UIBs are detected after the I2C host controllers are registered, so
* i2c_register_board_info() can't be used.
*/
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n)
{
struct i2c_adapter *adap;
struct i2c_client *client;
int i;
adap = i2c_get_adapter(busnum);
if (!adap) {
pr_err("failed to get adapter i2c%d\n", busnum);
return;
}
for (i = 0; i < n; i++) {
client = i2c_new_device(adap, &info[i]);
if (!client)
pr_err("failed to register %s to i2c%d\n",
info[i].type, busnum);
}
i2c_put_adapter(adap);
}
static void __init __mop500_uib_init(struct uib *uib, const char *why)
{
pr_info("%s (%s)\n", uib->name, why);
uib->init();
}
/*
* Detect the UIB attached based on the presence or absence of i2c devices.
*/
static int __init mop500_uib_init(void)
{
struct uib *uib = mop500_uib;
struct i2c_adapter *i2c0;
int ret;
if (!cpu_is_u8500())
return -ENODEV;
if (uib) {
__mop500_uib_init(uib, "from uib= boot argument");
return 0;
}
i2c0 = i2c_get_adapter(0);
if (!i2c0) {
__mop500_uib_init(&mop500_uibs[STUIB],
"fallback, could not get i2c0");
return -ENODEV;
}
/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
I2C_SMBUS_QUICK, NULL);
i2c_put_adapter(i2c0);
if (ret == 0)
uib = &mop500_uibs[U8500UIB];
else
uib = &mop500_uibs[STUIB];
__mop500_uib_init(uib, "detected");
return 0;
}
module_init(mop500_uib_init);
...@@ -207,8 +207,6 @@ static void __init u8500_init_machine(void) ...@@ -207,8 +207,6 @@ static void __init u8500_init_machine(void)
mop500_spi_init(); mop500_spi_init();
mop500_uart_init(); mop500_uart_init();
mop500_keypad_init();
platform_device_register(&ab8500_device); platform_device_register(&ab8500_device);
i2c_register_board_info(0, mop500_i2c0_devices, i2c_register_board_info(0, mop500_i2c0_devices,
......
...@@ -14,8 +14,14 @@ ...@@ -14,8 +14,14 @@
#define GPIO_SDMMC_EN MOP500_EGPIO(17) #define GPIO_SDMMC_EN MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) #define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
struct i2c_board_info;
extern void mop500_sdi_init(void); extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void); extern void mop500_sdi_tc35892_init(void);
extern void mop500_keypad_init(void); void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
unsigned n);
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment